[IC] Canoe by Percent Studios

[avid]

Dang was hoping for either an extra early or extra late drop for NA. I'll still be at work at 9PM x__x

Take a bathroom break 8.58 and be prepared on your phone.

[BAS1C]

Dang was hoping for either an extra early or extra late drop for NA. I'll still be at work at 9PM x__x

Take a bathroom break 8.58 and be prepared on your phone.

And make sure to pick the middle stall; always has best reception.

[Marutks]

4:00 AM in the UK?

[Harms]

So we just wait at 8:59 for the GB post to pop up in the GB section. Then go wild?

[avid]

So we just wait at 8:59 for the GB post to pop up in the GB section. Then go wild?

He will probably prepare a GB thread that will be up before this. And then can just update that page with a link when its 9.00.

[koduh]

This is the time the GB should start right?

https://www.worldtimeserver.com/convert_time_in_SG.aspx?y=2017&mo=11&d=4&h=12&mn=0

That way people can convert to their local time.

[SeedyOne]

So the price is still TBD as the first page says or did I miss it in the followup pages? A quick skim doesn't seem to show.

[BAS1C]

So the price is still TBD as the first page says or did I miss it in the followup pages? A quick skim doesn't seem to show.

Bottom ish of pg 4. He will get pricing worked out this weekend.

Wonder what the tally is :O tie-breaker for purple and the greyblack.. When are you closing that beamingrobot?

[SeedyOne]

Bottom ish of pg 4. He will get pricing worked out this weekend.

Wonder what the tally is :O tie-breaker for purple and the greyblack.. When are you closing that beamingrobot?

Oops, there it is. I was CTRL-F'ing "price" and "$". Should have tried "pricing". Thanks! 

[Marutks]

no split backspace?  =>  meh      

[DreLLin]

Not sure if it's already mentioned but ISO support would be nice.

[xondat]

Not sure if it's already mentioned but ISO support would be nice.

no split backspace?  =>  meh      

I've heard there is a plate update.

[BAS1C]

At this point I don't think any changes are going to happen to the design.. It is as it has been produced already.

I've heard there is a plate update.

oooo really?

[beamingrobot]

ISO support is available.

Final poll update after 48 hours:



also, there will be additional plate + pcb combos you can pick up. They come in pairs.

[Vadurr]

ISO support is available.

Final poll update after 48 hours:

Show Image

also, there will be additional plate + pcb combos you can pick up. They come in pairs.

Looks like black is the second winner. Does the plate update include split backspace?

[shadowrealmwarez]

ISO support is available.

Final poll update after 48 hours:

Show Image

also, there will be additional plate + pcb combos you can pick up. They come in pairs.

Very excited for additional plate + PCB combo's , will all the above plate/PCB combo's be available, or only a few?

[beamingrobot]

Very excited for additional plate + PCB combo's , will all the above plate/PCB combo's be available, or only a few?

probably only in the 2 colour combos chosen

Looks like black is the second winner. Does the plate update include split backspace?

I'll have to check about split bs support, will get back to you.

[BAS1C]

Very excited for additional plate + PCB combo's , will all the above plate/PCB combo's be available, or only a few?

probably only in the 2 colour combos chosen

Looks like black is the second winner. Does the plate update include split backspace?

I'll have to check about split bs support, will get back to you.

Ohhh dang that would be sick..

[kingnestea]

Very excited for additional plate + PCB combo's , will all the above plate/PCB combo's be available, or only a few?

probably only in the 2 colour combos chosen

Looks like black is the second winner. Does the plate update include split backspace?

I'll have to check about split bs support, will get back to you.

Ohhh dang that would be sick..

nope, no split backspace or spacebar. ISO is covered.

[mattijs]

ISO support is available.

Final poll update after 48 hours:

Show Image

also, there will be additional plate + pcb combos you can pick up. They come in pairs.

Awwww, purple lost by one vote. I was really hoping for that cool accent.


Sent from my iPhone using Tapatalk

[beamingrobot]

Price:

Set (Case, plate, PCB, weight): $385
PP fees: Separate

Estimated shipping cost:
Singapore: TBC
Malaysia: $10
Australia: $21
Korea: $24
USA: $27
Germany: $31

Not accurate shipping prices of course, but TBC.

Extra PCB+Plate: TBC, waiting on one more detail

I'm requesting for the chance to grab the PCB + Plate combo for existing Canoe owners, TBC.

***
Extra PCB + Plate will be cyan in colour, FYI.

[BAS1C]

Price:

Set (Case, plate, PCB, weight): $385
PP fees: Separate

Estimated shipping cost:
Singapore: TBC
Malaysia: $10
Australia: $21
Korea: $24
USA: $27
Germany: $31

Not accurate shipping prices of course, but TBC.

Extra PCB+Plate: TBC, waiting on one more detail

I'm requesting for the chance to grab the PCB + Plate combo for existing Canoe owners, TBC.

Awesome. Would love a purple plate... so shiny. Nice pricing!

[patersunny]

When can we buy? Still going to raffle? I'm keen to enter for a black one, not my vote but still interested.

[beamingrobot]

When can we buy? Still going to raffle? I'm keen to enter for a black one, not my vote but still interested.

We're looking at 12PM SGT (GMT+8) on 4th November 2017.

Someone linked this previously, it might help:
https://www.worldtimeserver.com/convert_time_in_SG.aspx?y=2017&mo=11&d=4&h=12&mn=0

I think EU users might suffer slightly, but if we go later NA peeps would have to stay up as well :/

If anyone has any suggestions for a more central time I'm open to suggestions, but I'm putting it at noon my time so that I'll be around to answer any questions, if there are any and provide support as well.

Also, we might increase the total number of units, looking at maybe 60 instead of 50. FCFS on monokei.us with the option to grab extra plate + combo, and for existing owners of Canoe I'll provide a different product link that has just plate + pcb combo.

another idea I have is to have 2 timeslots, each with 30 units available with a few hours in between.

hope it helps.

[patersunny]

FCFS hey? Damn.

Asy least the time zone is good for me being in Aus. I suppose I'll give it a try to get one, the price is good.

[Darknight00z]

Whats the ETA/ timeframe are we looking at? Estimate shipping in April?

[xondat]

another idea I have is to have 2 timeslots, each with 30 units available with a few hours in between.

This would be dope. I doubt anyone would be against it.

[beamingrobot]

This would be dope. I doubt anyone would be against it.

Yea maybe we can go with this then, I think having one more later by 6 hours would help the EU friends.

Whats the ETA/ timeframe are we looking at? Estimate shipping in April?

Yeap. Looking at about 4-5 months so hopefully I can have it out by April.

[xondat]

This would be dope. I doubt anyone would be against it.

Yea maybe we can go with this then, I think having one more later by 6 hours would help the EU friends.

Yeah currently it's 4AM UK, 5AM for the rest of the EU. 6 hours would be good. Only thing I'd say is maybe not a 50/50 split as there are a lot less EU people buying kustoms, but it keeps my chances higher if it is 50/50. )

[riotonthebay]

This would be dope. I doubt anyone would be against it.

Yea maybe we can go with this then, I think having one more later by 6 hours would help the EU friends.

Yeah currently it's 4AM UK, 5AM for the rest of the EU. 6 hours would be good. Only thing I'd say is maybe not a 50/50 split as there are a lot less EU people buying kustoms, but it keeps my chances higher if it is 50/50. )

If you go this route, it might be worth making it clear that you can't "double dip". E.g. you can either enter in the first timeslot or the second one, otherwise you'll 100% get a large portion of people submitting for both to have a higher chance.

[beamingrobot]

If you go this route, it might be worth making it clear that you can't "double dip". E.g. you can either enter in the first timeslot or the second one, otherwise you'll 100% get a large portion of people submitting for both to have a higher chance.

I'll definitely cancel any duplicate orders 

Yeah currently it's 4AM UK, 5AM for the rest of the EU. 6 hours would be good. Only thing I'd say is maybe not a 50/50 split as there are a lot less EU people buying kustoms, but it keeps my chances higher if it is 50/50. )

Ah, let's see how we can balance this out then

[xondat]

If you go this route, it might be worth making it clear that you can't "double dip". E.g. you can either enter in the first timeslot or the second one, otherwise you'll 100% get a large portion of people submitting for both to have a higher chance.

I'll definitely cancel any duplicate orders 

Good to hear

Yeah currently it's 4AM UK, 5AM for the rest of the EU. 6 hours would be good. Only thing I'd say is maybe not a 50/50 split as there are a lot less EU people buying kustoms, but it keeps my chances higher if it is 50/50. )

Ah, let's see how we can balance this out then

Only info I can offer is X60 being 68 US/Canada, 22 EU, and the remaining 10 being Asia/Australia.

[avid]

Personally i like one time-slot.

If splitting up time-slots, (esp if EU is given a smaller number) i will not take a chance for the EU drop (even if i am in the EU) since i will compete with people all over (trust me, people will stay up all night for this). There is also asians buyers which timeslot will fit better in with EU time.

How is duplicates working?

I mean, if you enter in the first round, but are to slow, are you not allowed to try again later?

[Oblotzky]

Personally i like one time-slot.

If splitting up time-slots, (esp if EU is given a smaller number) i will not take a chance for the EU drop (even if i am in the EU) since i will compete with people all over (trust me, people will stay up all night for this). There is also asians buyers which timeslot will fit better in with EU time.

How is duplicates working?

I mean, if you enter in the first round, but are to slow, are you not allowed to try again later?

I would assume the second entry is only removed if the first one was successful. But we'll also probably see the 'winners' of the first batch to be revealed before the second batch starts.

[beamingrobot]

Only info I can offer is X60 being 68 US/Canada, 22 EU, and the remaining 10 being Asia/Australia.

Thanks for the info

Personally i like one time-slot.

If splitting up time-slots, (esp if EU is given a smaller number) i will not take a chance for the EU drop (even if i am in the EU) since i will compete with people all over (trust me, people will stay up all night for this). There is also asians buyers which timeslot will fit better in with EU time.

How is duplicates working?

I mean, if you enter in the first round, but are to slow, are you not allowed to try again later?

Personally i like one time-slot.

If splitting up time-slots, (esp if EU is given a smaller number) i will not take a chance for the EU drop (even if i am in the EU) since i will compete with people all over (trust me, people will stay up all night for this). There is also asians buyers which timeslot will fit better in with EU time.

How is duplicates working?

I mean, if you enter in the first round, but are to slow, are you not allowed to try again later?

I would assume the second entry is only removed if the first one was successful. But we'll also probably see the 'winners' of the first batch to be revealed before the second batch starts.

I'll release the usernames of those who got in the first round. You're welcome to try in the second round if you didn't manage to get in the first. It's not the most perfect solution, but I think it'll give other timezones a better chance.

Also, we will look at doing more than 50 units that's for sure to give everyone who wants one a chance to get it.

[patersunny]

Wait did I miss something? Did we do the release?

[BAS1C]

Wait did I miss something? Did we do the release?

No, it’s nov 4th..

[avid]

Oh that makes sense! Ignore what i said in the last post, since you can enter in both rounds.

Looking forward to this. 

[poolside]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

[FactoryDefaults]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

Most color combos dont match with whats given in the pics, havent gotten response on it when i told him. About 3 combos are wrong from whats actually in the pics.

[avid]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

From what i can tell, top and lower case = black, plate and weight = gray.

[kingnestea]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

Most color combos dont match with whats given in the pics, havent gotten response on it when i told him. About 3 combos are wrong from whats actually in the pics.

The reason why those pictures don't match the color combo described, is because those are new color combo's from the Chinese batch, hence no pictures can be provided.

We've put the best matched pictures there to help you have a general idea of how it would look like. Pictures are really meant to provide an idea of how individual color looks like.

[poolside]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

Most color combos dont match with whats given in the pics, havent gotten response on it when i told him. About 3 combos are wrong from whats actually in the pics.

The reason why those pictures don't match the color combo described, is because those are new color combo's from the Chinese batch, hence no pictures can be provided.

We've put the best matched pictures there to help you have a general idea of how it would look like. Pictures are really meant to provide an idea of how individual color looks like.

Thanks for clarifying 
So, gray weight and plate. This looks better than the full black bottom.

[FactoryDefaults]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

Most color combos dont match with whats given in the pics, havent gotten response on it when i told him. About 3 combos are wrong from whats actually in the pics.

The reason why those pictures don't match the color combo described, is because those are new color combo's from the Chinese batch, hence no pictures can be provided.

We've put the best matched pictures there to help you have a general idea of how it would look like. Pictures are really meant to provide an idea of how individual color looks like.

Ah okay, makes sense then! So what order is it described, top/bottom/plate/weight?

[kingnestea]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

Most color combos dont match with whats given in the pics, havent gotten response on it when i told him. About 3 combos are wrong from whats actually in the pics.

The reason why those pictures don't match the color combo described, is because those are new color combo's from the Chinese batch, hence no pictures can be provided.

We've put the best matched pictures there to help you have a general idea of how it would look like. Pictures are really meant to provide an idea of how individual color looks like.

Ah okay, makes sense then! So what order is it described, top/bottom/plate/weight?

Yes

[FactoryDefaults]

Combo 7: black/black/gray/gray

I see a gray plate in these pictures while every other part looks black. Which one is supposed to be gray too?

Most color combos dont match with whats given in the pics, havent gotten response on it when i told him. About 3 combos are wrong from whats actually in the pics.

The reason why those pictures don't match the color combo described, is because those are new color combo's from the Chinese batch, hence no pictures can be provided.

We've put the best matched pictures there to help you have a general idea of how it would look like. Pictures are really meant to provide an idea of how individual color looks like.

Ah okay, makes sense then! So what order is it described, top/bottom/plate/weight?

Yes

Perfect, thank you for the info!

[Harms]

What does the buying form usually ask for like information wise? I know the invoice is usually e-mailed later.

[xondat]

What does the buying form usually ask for like information wise? I know the invoice is usually e-mailed later.

PayPal, address if isn’t the same as PayPal, options, and extras.

[pixelpusher]

What does the buying form usually ask for like information wise? I know the invoice is usually e-mailed later.

Getting your handy macros ready?

[Harms]

What does the buying form usually ask for like information wise? I know the invoice is usually e-mailed later.

Getting your handy macros ready?

Ahahah you know it