Author Topic: TX-series keyboards (Read 326338 times)

ihalatch · « **Reply #950 on:** Tue, 18 April 2017, 23:51:44 »

Paid. Thanks Kin for making this happen.

laughatpain · « **Reply #951 on:** Wed, 19 April 2017, 00:28:52 »

Submited for tx1800 v2, didnt get an invoice. No more nice boards?

kin25 · « **Reply #952 on:** Wed, 19 April 2017, 06:24:39 »

Bag ziper pull sample.

Bag sample will be made on 23 April.

kin25 · « **Reply #953 on:** Wed, 19 April 2017, 06:26:19 »

Quote from: romevi on Tue, 18 April 2017, 10:52:30

Still no GB thread for TX1800 v2?

Not yet..
Probably... Before approval, tx1800v2 R1 will be sold out.

kin25 · « **Reply #954 on:** Wed, 19 April 2017, 12:12:43 »

Diffuser and gasket.

You can use Diffuser pieces (white) and Metal gasket (yellow) together.

Sorry.. Metal gasket is being made now.
I will receive them on 8 May.

WNovizar · « **Reply #955 on:** Wed, 19 April 2017, 12:15:20 »

Quote from: kin25 on Wed, 19 April 2017, 12:12:43

Diffuser and gasket.

You can use Diffuser pieces (white) and Metal gasket (yellow) together.

(Attachment Link)

Sorry.. Metal gasket is being made now.
I will receive them on 8 April.

8 April

Are you going to the past and took it

aznreaper · « **Reply #956 on:** Wed, 19 April 2017, 12:39:41 »

Quote from: kin25 on Wed, 19 April 2017, 12:12:43

Diffuser and gasket.

You can use Diffuser pieces (white) and Metal gasket (yellow) together.

(Attachment Link)

Sorry.. Metal gasket is being made now.
I will receive them on 8 April.

Does this mean there will be under glow regardless if you use the gaskets or not? No option to remove all under glow?

EDIT: my bad, reading back the gaskets just cone in eight different pieces, I'd like to see pictures when you get them kin to see if how visible the seams are. I looked how clean the tx75 and TXCP were, would like to keep that theme going on my tx boards

smittysteve · « **Reply #957 on:** Wed, 19 April 2017, 12:43:58 »

Quote from: aznreaper on Wed, 19 April 2017, 12:39:41

Quote from: kin25 on Wed, 19 April 2017, 12:12:43
Diffuser and gasket.

You can use Diffuser pieces (white) and Metal gasket (yellow) together.

(Attachment Link)

Sorry.. Metal gasket is being made now.
I will receive them on 8 April.

Does this mean there will be under glow regardless if you use the gaskets or not? No option to remove all under glow?

The metal gasket add-on is 8 pieces, so I'm pretty sure you can go all-metal/ no underglow.

KetchyKech · « **Reply #958 on:** Wed, 19 April 2017, 13:22:46 »

holy crap just saw that you were accepting pre-orders on ur sig ~~ I joined!! hope i made it for round 1 !!

maximm · « **Reply #959 on:** Wed, 19 April 2017, 13:50:27 »

Paid up for my blue TX-1800 with brass plate. Going to be amazing with Dasher/Dancer!

kin25 · « **Reply #960 on:** Wed, 19 April 2017, 13:51:08 »

Quote from: WNovizar on Wed, 19 April 2017, 12:15:20

8 April Are you going to the past and took it

My mistake..

8 May... factory will send them.

KetchyKech · « **Reply #961 on:** Wed, 19 April 2017, 13:53:22 »

Quote from: kin25 on Wed, 19 April 2017, 13:51:08

Quote from: WNovizar on Wed, 19 April 2017, 12:15:20
8 April Are you going to the past and took it

My mistake..
8 May... factory will send them.

are the gold gasket close in color to the brass plate and brass weight? May have to add brass plate to my order if so...thanks!

kin25 · « **Reply #962 on:** Wed, 19 April 2017, 14:02:51 »

Quote from: KetchyKech on Wed, 19 April 2017, 13:53:22

Quote from: kin25 on Wed, 19 April 2017, 13:51:08
Quote from: WNovizar on Wed, 19 April 2017, 12:15:20
8 April Are you going to the past and took it

My mistake..
8 May... factory will send them.

are the gold gasket close in color to the brass plate and brass weight? May have to add brass plate to my order if so...thanks!

I think they are a little different.

KetchyKech · « **Reply #963 on:** Wed, 19 April 2017, 14:15:42 »

Quote from: kin25 on Wed, 19 April 2017, 14:02:51

Quote from: KetchyKech on Wed, 19 April 2017, 13:53:22
Quote from: kin25 on Wed, 19 April 2017, 13:51:08
Quote from: WNovizar on Wed, 19 April 2017, 12:15:20
8 April Are you going to the past and took it

My mistake..
8 May... factory will send them.

are the gold gasket close in color to the brass plate and brass weight? May have to add brass plate to my order if so...thanks!

I think they are a little different.

ah thank you for the quick response

I'll leave my order as is

Jedi · « **Reply #964 on:** Wed, 19 April 2017, 14:35:57 »

Hi Kin, did you see my PM?

poolside · « **Reply #965 on:** Wed, 19 April 2017, 19:29:54 »

Can we request SIP sockets for LEDs with the TX-CP R2 assembling service?
Also, which LED colors are available?

kin25 · « **Reply #966 on:** Wed, 19 April 2017, 22:38:54 »

Quote from: poolside on Wed, 19 April 2017, 19:29:54

Can we request SIP sockets for LEDs with the TX-CP R2 assembling service?
Also, which LED colors are available?

Sip sockets are available.

White.
Warm white
Red
Blue
Green
Ice blue
Pink

Mr_BeastQuake · « **Reply #967 on:** Wed, 19 April 2017, 23:45:48 »

Black case, brass plate, gold gasket, SS weight. Extra aluminum plate and PCB as well. Plan on keeping this baby for awhile. Excited!

KetchyKech · « **Reply #968 on:** Thu, 20 April 2017, 10:42:16 »

paid!!!

thanks kin!

anhthao88 · « **Reply #969 on:** Thu, 20 April 2017, 12:45:36 »

Hi Kin, do you still have the TX-75 and TX-Pad in stock?

tuantruong · « **Reply #970 on:** Thu, 20 April 2017, 12:47:39 »

are those bag and Bag ziper available for purchase separately?

popkorn62 · « **Reply #971 on:** Thu, 20 April 2017, 13:27:47 »

Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.

romevi · « **Reply #972 on:** Thu, 20 April 2017, 14:10:15 »

Quote from: popkorn62 on Thu, 20 April 2017, 13:27:47

Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.

Are you a prophet?

anhthao88 · « **Reply #973 on:** Thu, 20 April 2017, 14:11:39 »

Quote from: popkorn62 on Thu, 20 April 2017, 13:27:47

Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.

Did you mean his current website would be updated?

kin25 · « **Reply #974 on:** Thu, 20 April 2017, 17:56:38 »

Quote from: tuantruong on Thu, 20 April 2017, 12:47:39

are those bag and Bag ziper available for purchase separately?

Yes. Bags for all kind of keyboards will be made..

kin25 · « **Reply #975 on:** Thu, 20 April 2017, 18:06:52 »

Quote from: romevi on Thu, 20 April 2017, 14:10:15

Quote from: popkorn62 on Thu, 20 April 2017, 13:27:47
Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.

Are you a prophet?

She is helping to make my website.

kin25 · « **Reply #976 on:** Thu, 20 April 2017, 18:10:16 »

Quote from: romevi on Thu, 20 April 2017, 14:10:15

Quote from: popkorn62 on Thu, 20 April 2017, 13:27:47
Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.

Are you a prophet?

She is helping to make my website.

Quote from: anhthao88 on Thu, 20 April 2017, 12:45:36

Hi Kin, do you still have the TX-75 and TX-Pad in stock?

Yes.. There are some extras.
But.. Now i am a little busy.
So I have no time to pack and send the order.
The busy works will be ended until April.

anhthao88 · « **Reply #977 on:** Thu, 20 April 2017, 18:26:52 »

Quote from: kin25 on Thu, 20 April 2017, 18:10:16

Quote from: romevi on Thu, 20 April 2017, 14:10:15
Quote from: popkorn62 on Thu, 20 April 2017, 13:27:47
Kin will have a new website with support ticket soon. It'll be much easier to communicate with him.

Are you a prophet?

She is helping to make my website.
Quote from: anhthao88 on Thu, 20 April 2017, 12:45:36
Hi Kin, do you still have the TX-75 and TX-Pad in stock?

Yes.. There are some extras.
But.. Now i am a little busy.
So I have no time to pack and send the order.
The busy works will be ended until April.

That's good to know Kin. So it's better to contact you re purchase in May then?

Sent from my LG-H820 using Tapatalk

Baconheart · « **Reply #978 on:** Thu, 20 April 2017, 20:45:42 »

Are the invoices for the TX-CPs being sent out yet or just the 1800v2s?

Slash Emperor · « **Reply #979 on:** Thu, 20 April 2017, 21:26:22 »

After sitting down and thinking about colors, I couldn't say no to that gray, in for gray TX1800 V2 with brass plate and weight plus gold gaskets! Hope I just barely made it into round 1.

kin25 · « **Reply #980 on:** Thu, 20 April 2017, 21:50:09 »

Quote from: Baconheart on Thu, 20 April 2017, 20:45:42

Are the invoices for the TX-CPs being sent out yet or just the 1800v2s?

Sorry.. I sent invoices of tx1800v2 last night.

I will send tx.cp R2 invoices tonight.

KetchyKech · « **Reply #981 on:** Thu, 20 April 2017, 21:52:23 »

Quote from: Slash Emperor on Thu, 20 April 2017, 21:26:22

After sitting down and thinking about colors, I couldn't say no to that gray, in for gray TX1800 V2 with brass plate and weight plus gold gaskets! Hope I just barely made it into round 1.

lol great minds think alike....did the same

kin25 · « **Reply #982 on:** Thu, 20 April 2017, 22:01:37 »

https://geekhack.org/index.php?topic=88916.0

TX1800v2 preorder

Approval !

Mr_BeastQuake · « **Reply #983 on:** Thu, 20 April 2017, 22:53:03 »

Quote from: kin25 on Thu, 20 April 2017, 22:01:37

https://geekhack.org/index.php?topic=88916.0

TX1800v2 preorder

Approval !

Well, that's depressing. In on the preorder anyways though.

ricyuyc · « **Reply #984 on:** Thu, 20 April 2017, 22:57:24 »

Would you share some pics that show the anodizing in Black, Grey & Silver of 1800v2?

kin25 · « **Reply #985 on:** Thu, 20 April 2017, 23:09:57 »

Black, silver, red

I will show Gray and blue color sample asap.

smittysteve · « **Reply #986 on:** Thu, 20 April 2017, 23:10:53 »

Quote from: KetchyKech on Thu, 20 April 2017, 21:52:23

Quote from: Slash Emperor on Thu, 20 April 2017, 21:26:22
After sitting down and thinking about colors, I couldn't say no to that gray, in for gray TX1800 V2 with brass plate and weight plus gold gaskets! Hope I just barely made it into round 1.

lol great minds think alike....did the same

And if by great minds, you mean Kin crackheads... I'm in too. Love TX boards so very much. This one will be a desk staple for a long while.

Baconheart · « **Reply #987 on:** Thu, 20 April 2017, 23:13:33 »

Quote from: kin25 on Thu, 20 April 2017, 21:50:09

Quote from: Baconheart on Thu, 20 April 2017, 20:45:42
Are the invoices for the TX-CPs being sent out yet or just the 1800v2s?

Sorry.. I sent invoices of tx1800v2 last night.

I will send tx.cp R2 invoices tonight.

Awesome, thanks for the update!

ricyuyc · « **Reply #988 on:** Thu, 20 April 2017, 23:27:59 »

Quote from: kin25 on Thu, 20 April 2017, 22:01:37

https://geekhack.org/index.php?topic=88916.0

TX1800v2 preorder

Approval !

Can't reach, maybe my membership not high enough.
BTW, thx for the sample pic.

kin25 · « **Reply #989 on:** Thu, 20 April 2017, 23:34:19 »

Quote from: ricyuyc on Thu, 20 April 2017, 23:27:59

Quote from: kin25 on Thu, 20 April 2017, 22:01:37
https://geekhack.org/index.php?topic=88916.0

TX1800v2 preorder

Approval !
Can't reach, maybe my membership not high enough.
BTW, thx for the sample pic.

It was opened for a moment (160 view), and closed.
I don't know why..

maximm · « **Reply #990 on:** Fri, 21 April 2017, 10:02:55 »

Is it possible to buy multiple tops for the TX-CP or are they sold as kits as the TX-1800v2?

kin25 · « **Reply #991 on:** Fri, 21 April 2017, 10:14:14 »

Quote from: maximm on Fri, 21 April 2017, 10:02:55

Is it possible to buy multiple tops for the TX-CP or are they sold as kits as the TX-1800v2?

It is set price.

tuantruong · « **Reply #992 on:** Fri, 21 April 2017, 10:42:41 »

Quote from: kin25 on Thu, 20 April 2017, 17:56:38

Quote from: tuantruong on Thu, 20 April 2017, 12:47:39
are those bag and Bag ziper available for purchase separately?

Yes. Bags for all kind of keyboards will be made..

Nice, definitely get some bags for my boards.

diiiP · « **Reply #993 on:** Fri, 21 April 2017, 11:03:29 »

Received (and payed) my invoice for the TX.CP r2.
Now the waiting begins

footiemonkey · « **Reply #994 on:** Fri, 21 April 2017, 11:14:08 »

Quote from: diiiP on Fri, 21 April 2017, 11:03:29

Received (and payed) my invoice for the TX.CP r2.
Now the waiting begins

Same

I'll prob forget and it'll be the greatest surprise.

zekkin · « **Reply #995 on:** Fri, 21 April 2017, 11:15:59 »

Just got my invoice for the TX-CP. Is there a set due date, kin?

I think you said payment is due in May?

kin25 · « **Reply #996 on:** Fri, 21 April 2017, 11:20:49 »

Quote from: zekkin on Fri, 21 April 2017, 11:15:59

Just got my invoice for the TX-CP. Is there a set due date, kin?

I think you said payment is due in May?

Before shipping..
I don't rush..
You can pay whenever you are ready to pay.
Plz don't cacel.

Teacob · « **Reply #997 on:** Fri, 21 April 2017, 12:23:27 »

Nice, been eyeing up a TX board for a few months now.

Good luck all ye who join!

lasermild · « **Reply #998 on:** Sat, 22 April 2017, 02:55:23 »

It seems I made a mistake not choosing any single plate.
Please change my order to include stainless steel plate and update my invoice.
thank you kin

kin25 · « **Reply #999 on:** Sat, 22 April 2017, 04:09:41 »

Quote from: lasermild on Sat, 22 April 2017, 02:55:23

It seems I made a mistake not choosing any single plate.
Please change my order to include stainless steel plate and update my invoice.
thank you kin

Haha.. Ok.. I will change your order.

News:

Author Topic: TX-series keyboards (Read 326338 times)