[GB COMPLETE] SaiB - CP

[Niz8sauce]

I would like to join the pre order.

Order quantity: 2
Color : 2 Black

[poolside]

One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...

the bottom insert/weight plate was not support.

but, I'll open the plate CAD document.

Use it with pleasure.

in my case, I am going to make a Wooden board.

Arrgh, no weight plate? 
Or is that only for the prototype?

[Puddsy]

One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...

the bottom insert/weight plate was not support.

but, I'll open the plate CAD document.

Use it with pleasure.

in my case, I am going to make a Wooden board.

Arrgh, no weight plate? 
Or is that only for the prototype?

I think he's saying he's gonna do it like duck, where you can add a weight later.

[PainMaster]

One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...

the bottom insert/weight plate was not support.

but, I'll open the plate CAD document.

Use it with pleasure.

in my case, I am going to make a Wooden board.

Arrgh, no weight plate? 
Or is that only for the prototype?

I think he's saying he's gonna do it like duck, where you can add a weight later.

that's right !!

[PainMaster]

Yeh ~!!!

Achieved 20 !!

Thx. Everyone.

[packman86]

Yeh ~!!!

Achieved 20 !!

Thx. Everyone.

Congratulations!

Can't wait to get this!

[crtexcnndrm99]

Yes! This is so good dude. Now for the invoice


Sent from my iPhone using Tapatalk

[Badmotorfinger]

I’m in

Quantity: 1
Color: TitanGray


Sent from my iPhone using Tapatalk

[PainMaster]

Yeh ~!!!

Achieved 20 !!

Thx. Everyone.

Congratulations!

Can't wait to get this!

as fast as possible,
and,  exactly
I want to send it.
Wait a few months dude.

[poolside]

One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...

the bottom insert/weight plate was not support.

but, I'll open the plate CAD document.

Use it with pleasure.

in my case, I am going to make a Wooden board.

Arrgh, no weight plate? 
Or is that only for the prototype?

I think he's saying he's gonna do it like duck, where you can add a weight later.

that's right !!

Thanks. Will you run a mini group buy for these wooden "weight" plates too?

[crtexcnndrm99]

One question. Will the bottom insert/weight have any writing on it? I'm okay with a plain brass or stainless steel look...

the bottom insert/weight plate was not support.

but, I'll open the plate CAD document.

Use it with pleasure.

in my case, I am going to make a Wooden board.

Arrgh, no weight plate? 
Or is that only for the prototype?

I think he's saying he's gonna do it like duck, where you can add a weight later.

that's right !!

Thanks. Will you run a mini group buy for these wooden "weight" plates too?

The IBM sticker on the front of the board in the pictures looks nice. Maybe a GB for a weight that is engraved to look like the plaques on the back of an IBM/Cherry board (IBM logo, 'made in __' etc.) could be cool?

[NastyRabbit]

Awesome, exactly what I was looking for. I'm in for preorder

Quantity 1
Colour : Black

[PainMaster]

Paypal account created success.

Google Poll creating...

[wholypantalones]

Paypal account created success.

Google Poll creating...

Take your time, wallet broken. Waiting for reboot..

[doom2]

I want in for 1!

Sent from my Pixel XL using Tapatalk

[packman86]

I'm in.

Order quantity: 1
Color: TitanGray Silver

I have to pull out. Purchased a TX-CP instead.

[PainMaster]

PreOrder D-Day : 2 !

[ihalatch]

Invoices?

[PainMaster]

Invoices?

Sorry my home network error since last friday.
Now modifying.
Wait a hours. T^T

[MandrewDavis]

Sorry for the tardiness, am I still able to join?

[PainMaster]

Sorry for the tardiness, am I still able to join?

able.

[PainMaster]

Sorry,

I'm Late !!

Google forms : PreOrder Ended

Please , join this !!!!

[aznreaper]

Just a few question before I submit my form, do we need to state anywhere if we've preordered? Also, what is complex colours and when are invoices going to be due?

[PainMaster]

Just a few question before I submit my form, do we need to state anywhere if we've preordered? Also, what is complex colours and when are invoices going to be due?

PreOrder will end on November 30th.
However, I will give more opportunities to those who have join comment until November 30th.

complex colours is about "MIX"
for example, top black, bottom silver.

invoices due Date is 2018-04-01 (expect)

[amnesia0287]

Just a few question before I submit my form, do we need to state anywhere if we've preordered? Also, what is complex colours and when are invoices going to be due?

PreOrder will end on November 30th.
However, I will give more opportunities to those who have join comment until November 30th.

complex colours is about "MIX"
for example, top black, bottom silver.

invoices due Date is 2018-04-01 (expect)

Wait, invoices aren’t due until April? Or is that supposed to be Jan 04 2018? Or something else lol.

[Puddsy]

I think he has his dates the right way around, and not the American way.

[crtexcnndrm99]

What is the ‘PayPal address (preorder only)’ link at the top of the form?


Sent from my iPhone using Tapatalk

[ihalatch]

I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?

[PainMaster]

I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?

I already to explain this in main description.

PreOrder (~11/30)  = $ 375 (Top / Bottom / Plate / PCB / Shipping)

GroupBuy (12/01~)  = $ 395 (Top / Bottom / Plate / PCB / Shipping)

[amnesia0287]

I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?

I already to explain this in main description.

PreOrder (~11/30)  = $ 375 (Top / Bottom / Plate / PCB / Shipping)

GroupBuy (12/01~)  = $ 395 (Top / Bottom / Plate / PCB / Shipping)

He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.

It’s not normally just a link.

[PainMaster]

I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?

I already to explain this in main description.

PreOrder (~11/30)  = $ 375 (Top / Bottom / Plate / PCB / Shipping)

GroupBuy (12/01~)  = $ 395 (Top / Bottom / Plate / PCB / Shipping)

He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.

It’s not normally just a link.

Ah .... ok. isee

I'll prepare an invoice.

[crtexcnndrm99]

Anyone going black top with silver bottom? Wondering whether it'll work nicely since the top/bottom pieces are flush on the sides (no overhang etc.)

[MechanicalElement]

So just to clarify, Send money via the link at the top of the form, or wait for an invoice?

[infiniti]

Moved this to the GB and Preorders sub-forum for better visibility.

Also, as a reminder to all, CAVEAT EMPTOR

GLWGB!

[wholypantalones]

Housing Top / Plate / PCB / Housing Bottom) + Shipping Estimate

Is the pre order price including shipping or is it separate from the pre order price?

Any estimate on production / shipping time?

[ye_cole]

What do you mean by more complex colors?

We can request custom colors?

[OmegaSupreme]

What do you mean by more complex colors?

We can request custom colors?

He said that hat was for people that want a different top and bottom colour.

Titan grey, black and silver are the only colours available.

[Puddsy]

GLWGB!

[poolside]

In! Waiting for the invoice too 

Paypal account created success.

Google Poll creating...

Have you made sure that PayPal won't freeze your account during this group buy?

[wholypantalones]

In! Waiting for the invoice too 

Paypal account created success.

Google Poll creating...

Have you made sure that PayPal won't freeze your account during this group buy?

This is the most important question.

[Puddsy]

It's impossible to be sure, honestly. We kinda just have to hope.

[OmegaSupreme]

Doesn’t Paypal put the money on hold either way after a certain amount of time and no proof of shipment is provided?

Especially for a new account this might most likely happen either way.

[cocobrais]

Doesn’t Paypal put the money on hold either way after a certain amount of time and no proof of shipment is provided?

Especially for a new account this might most likely happen either way.

I don't know that paypal will hold or not, but my opinion is
At least GB runner has to be able to absorb the risk in this situation.
In ase of the my friend LZ absorbed this risk in last lz cls GB  and this is basic rule of gb runner.
I also considered this risk in my GB.
I hope that he also.

[aznreaper]

I've just submitted the form. I'm confused now. The link at the top of the form - PayPal link? Is this a direct payment of $375 and preorder? Please clarify?

I already to explain this in main description.

PreOrder (~11/30)  = $ 375 (Top / Bottom / Plate / PCB / Shipping)

GroupBuy (12/01~)  = $ 395 (Top / Bottom / Plate / PCB / Shipping)

He’s confused because with most GB, after filling out the form, the GB Runner usually sends invoices for the order and that is what people pay.

It’s not normally just a link.

Ah .... ok. isee

I'll prepare an invoice.

Can you just confirm if you'll be sending out invoices for everyone, or if you still want us to pay through the link?

[Puddsy]

Korean GBs are generally run via bank transfer, so there's a bit of a cultural shift. You just send money and then wait.

[PainMaster]

The end of the program development project.
It was too busy.
I am sorry to have neglected communication.

wholypantalones: PreOrder prices include shipping prices.
                          Production is expected to finish on the last day of 2018/02
                          & Shipping is expected to finish on the last day of 2018/03
poolside: There seems to be no problem with paypal.
              Someone has already deposited money.

[eyedrop]

The OP said preorder is $375 + shipping estimate?

And do we fill out the Google form?  There is a link on the top of the form which redirects to paypal for $375?

[crtexcnndrm99]

375 preorder includes shipping? If that’s the case I’ll pay right now!


Sent from my iPhone using Tapatalk

[PainMaster]

sorry...   
i missed paypal Fee
 

PreOrder 375 + 15 = $390
GrupBuy 395 + 37 (Add Insufficient Shipping Cost) + 18 = $450

By My mistake
Two Peoples Give me a pre-payment
I will waive the their two peoples's Paypal fee.

Thanks friends.
I will keep your faith.


PreOrder prices (390) include shipping prices.

[trikoi00]

I filled the form once for preorder. Now I must pay through the link to finalize it or wait for Paypal invoice ? I am confused.