Have you read the geekhack TOS lately?
0 Members and 2 Guests are viewing this topic.
Quote from: realxmlforce on Sun, 23 February 2020, 11:08:15Definitely interested. I guess you can offer a 40% case for less than $100?Uff, I might be able to offer a 40% for around the 100€ mark, maybe a tiny bit less, but I don't think I'll be able to do less that 100$. Quite a lot have filled out the IC form. This number would allow for such a price on the 40%, but I don't think it would be a good idea to rely on that number. I'll have to wait for updated quotes. Getting it produced for super cheap in Germany isn't really possible.Really difficult to say how much I should trust the IC form numbers.
Definitely interested. I guess you can offer a 40% case for less than $100?
How about a southpaw version?
Will the SKB2-60 or SKB-2 65 support pcbs like Tada68 or DZ65?
Maybe also a 40Ortho?Maarten also has the Eon40 - a 40% ortholinear PCB. Thinking about offering a version for this as well. 40% is really small, the bezels would have to be smaller in comparison to the bigger sizes. Otherwise is would look unbalanced, imo. This is what a SKB2-40 with adapted bezel size would look like:Show Image Show Image Show Image Show ImageNot sure if there is enough interest for a 40-ortho, what are your thoughts?
I am definitely going to be getting one of these once it goes into GB. Such a nice board.
Quote from: Pozz on Mon, 24 February 2020, 16:45:04I am definitely going to be getting one of these once it goes into GB. Such a nice board.My only doubt here is whether to get one WK TKL and one WKL, or go WKL with both.
Quote from: depletedvespene on Tue, 25 February 2020, 16:11:49Quote from: Pozz on Mon, 24 February 2020, 16:45:04I am definitely going to be getting one of these once it goes into GB. Such a nice board.My only doubt here is whether to get one WK TKL and one WKL, or go WKL with both. Get four just to be sure.
I have the cases from the 3rd batch since quite a while already. What is still missing are the latest plates. The company that does the nickel and zink treatment is a bit slower. Though they are done since last week but atm I'm ill, got the flue, just the standard stuff, no corona. I'll drive over to pick up the plates when I'm fine again.That black, RAL9005 60% wob build is from the 3rd batch. Used a plate from the 2nd batch. This 3rd batch now includes 60%, 65% and TKL sizes in balck/RAL9005, beige/RAL1013 and yellow/RAL1023. All look very good imo. More stainless steel as well. Also waiting for some keycap sets to arrive, need something that fits yellow. Soon I have all ingredients necessary to show more from the 3rd batch.
Though they are done since last week but atm I'm ill, got the flue, just the standard stuff, no corona.
Hoping to see 1800 or full size or 96... But think fairly unlikely Sent from my Redmi K20 Pro using Tapatalk
Hope you feel better soon!Will you offer Boardwalk PCBs/plates during the GB, and if so, will the plate support all layouts? I see your message that MKULTRA will run Boardwalk PCBs separately, should we just try to order from them whenever (like before this GB starts) or do you recommend we wait until this GB?
This black would look so good with mt3 /dev/tty. Can't wait to build it!
Quote from: eebogaine on Sun, 16 February 2020, 08:48:06This black would look so good with mt3 /dev/tty. Can't wait to build it!Uuuuh... now this is something I hadn't thought of.
Quote from: depletedvespene on Sat, 29 February 2020, 18:19:46Quote from: eebogaine on Sun, 16 February 2020, 08:48:06This black would look so good with mt3 /dev/tty. Can't wait to build it!Uuuuh... now this is something I hadn't thought of. Can't claim it as my original idea . This was my inspiration:Show Image
Would b great if u can do alice, i love the lay out.
but atm I'm ill, got the flue, just the standard stuff, no corona. I'll drive over to pick up the plates when I'm fine again.
Hi Plastikschnittstelle, will the Boardwalk plate in version one fit the SKB2? In fact will SKB-01 plates fit the new SKB-02 in general?
Quote from: PlastikSchnittstelle on Wed, 26 February 2020, 16:03:25but atm I'm ill, got the flue, just the standard stuff, no corona. I'll drive over to pick up the plates when I'm fine again. should we start to worry? Gute Besserung - hope everything is fine again
There is Lisa coming up pretty soon.
Quote from: eebogaine on Mon, 09 March 2020, 23:44:21Quote from: AspiringMechKeebFan on Mon, 09 March 2020, 13:09:02There is Lisa coming up pretty soon.Interesting how it eliminates the corner gaps as compared to SKB2. Perhaps @PlastikSchnittstelle can comment?There are no protos pictured, only renders, so yeah, gaps are eliminated. The only way I see it can be done is making front and rear walls on the top sheet and side walls on the bottom sheet.
Quote from: AspiringMechKeebFan on Mon, 09 March 2020, 13:09:02There is Lisa coming up pretty soon.Interesting how it eliminates the corner gaps as compared to SKB2. Perhaps @PlastikSchnittstelle can comment?
What kind of waiting time are we looking at for the group buy @Plastikschnittstelle
The last three weeks, work on this project was completely on hold because first I catched a flue, after that I had to do other stuff. I'm back into it now and planning to start the GB at the end of this month. Next up is still taking good photos. I'm waiting for some caps to arrive. They will fit the yellow case very well. Currently more renderings are in the works and I'm making preparations that should set the stage for a smooth GB operation.