More
A few pictures for your viewing. Thanks for the support!
(http://i.imgur.com/ODJbPaY.jpg)
(http://i.imgur.com/QI3NStu.jpg)
(http://i.imgur.com/MBbogny.jpg)
More
(http://i.imgur.com/erbYu8T.jpg)
Lil Tim
(http://i.imgur.com/8t7Fe2s.jpg)
Goo
(http://i.imgur.com/7YSSAY2.jpg)
Kappa
(http://i.imgur.com/ZKESIZP.jpg)
Screamer
Hey folks,
Alot have been going on and i have finally something to show you guys.
Show Image
(http://i.imgur.com/elCQyJY.jpg)
Dont mind the color its just a prototype.
This is molded and cast-ed by a friend of mine(mysterious famous cap maker). Thanks god for it i realized the issues i have which i dint noticed.
1. I should avoid all under spaces or gaps that will destroy the silicon mold easily.
2. the base of the cap is just not thick enough and the base is too high (my personal preference) also i should have my own custom stem and base design.
3. I need a bigger space for my keycap production.
I'm solving the 1st and 2nd issue by printing a custom key cap base for my caps making. i will have a few profiles and each of them with my custom stem and logo printed/embossed within the base, by doing this i will have the desired walls thickness i wanted and HEY! my logo in each caps :p even though this process might takes up some time but its already in drawing stage for the base caps, so i hope my base caps prototype will be done around early June. After the 3D printing process i will have to redo lil tim and goo, so expect to see some improvements on the sculpting details.
Also i'm preparing something special for the Tokyo meet-up coming this 22nd, so its hard to allocate myself in everything at the same time.
Hope you folks dint lost your patience on me, and thanks so much for the love and support! will post updates after my Tokyo trip. :thumb:
Wow that is a great cap! Just found this thread! Keep up the good work!
Hey folks,
Alot have been going on and i have finally something to show you guys.
Show Image
(http://i.imgur.com/elCQyJY.jpg)
Dont mind the color its just a prototype.
This is molded and cast-ed by a friend of mine(mysterious famous cap maker). Thanks god for it i realized the issues i have which i dint noticed.
1. I should avoid all under spaces or gaps that will destroy the silicon mold easily.
2. the base of the cap is just not thick enough and the base is too high (my personal preference) also i should have my own custom stem and base design.
3. I need a bigger space for my keycap production.
I'm solving the 1st and 2nd issue by printing a custom key cap base for my caps making. i will have a few profiles and each of them with my custom stem and logo printed/embossed within the base, by doing this i will have the desired walls thickness i wanted and HEY! my logo in each caps :p even though this process might takes up some time but its already in drawing stage for the base caps, so i hope my base caps prototype will be done around early June. After the 3D printing process i will have to redo lil tim and goo, so expect to see some improvements on the sculpting details.
Also i'm preparing something special for the Tokyo meet-up coming this 22nd, so its hard to allocate myself in everything at the same time.
Hope you folks dint lost your patience on me, and thanks so much for the love and support! will post updates after my Tokyo trip. :thumb:
Man, you killing it!!! Was definitely worth the wait!
Hey folks,
Alot have been going on and i have finally something to show you guys.
Show Image
(http://i.imgur.com/elCQyJY.jpg)
Dont mind the color its just a prototype.
This is molded and cast-ed by a friend of mine(mysterious famous cap maker). Thanks god for it i realized the issues i have which i dint noticed.
1. I should avoid all under spaces or gaps that will destroy the silicon mold easily.
2. the base of the cap is just not thick enough and the base is too high (my personal preference) also i should have my own custom stem and base design.
3. I need a bigger space for my keycap production.
I'm solving the 1st and 2nd issue by printing a custom key cap base for my caps making. i will have a few profiles and each of them with my custom stem and logo printed/embossed within the base, by doing this i will have the desired walls thickness i wanted and HEY! my logo in each caps :p even though this process might takes up some time but its already in drawing stage for the base caps, so i hope my base caps prototype will be done around early June. After the 3D printing process i will have to redo lil tim and goo, so expect to see some improvements on the sculpting details.
Also i'm preparing something special for the Tokyo meet-up coming this 22nd, so its hard to allocate myself in everything at the same time.
Hope you folks dint lost your patience on me, and thanks so much for the love and support! will post updates after my Tokyo trip. :thumb:
Lookin' great man. Can't wait to see more.
Hey folks,
Alot have been going on and i have finally something to show you guys.
Show Image
(http://i.imgur.com/elCQyJY.jpg)
Dont mind the color its just a prototype.
This is molded and cast-ed by a friend of mine(mysterious famous cap maker). Thanks god for it i realized the issues i have which i dint noticed.
1. I should avoid all under spaces or gaps that will destroy the silicon mold easily.
2. the base of the cap is just not thick enough and the base is too high (my personal preference) also i should have my own custom stem and base design.
3. I need a bigger space for my keycap production.
I'm solving the 1st and 2nd issue by printing a custom key cap base for my caps making. i will have a few profiles and each of them with my custom stem and logo printed/embossed within the base, by doing this i will have the desired walls thickness i wanted and HEY! my logo in each caps :p even though this process might takes up some time but its already in drawing stage for the base caps, so i hope my base caps prototype will be done around early June. After the 3D printing process i will have to redo lil tim and goo, so expect to see some improvements on the sculpting details.
Also i'm preparing something special for the Tokyo meet-up coming this 22nd, so its hard to allocate myself in everything at the same time.
Hope you folks dint lost your patience on me, and thanks so much for the love and support! will post updates after my Tokyo trip. :thumb:
It's so dang cute
Lil' Tim and Goo are amazing! Really fantastic work man.
Show Image
(http://i.imgur.com/zClZ8nS.jpg)
New Designs coming soon!
Ooooh exciting!
Show Image
(http://i.imgur.com/zClZ8nS.jpg)
New Designs coming soon!
Hey, I have a nose just like that.
when will the sale go live?
Wondering the same thing. Sale listed for today, and no one viewing the thread =/ am I missing something?
Do we have to wrong date, or does he? O.o
Not much ambiguity when the month and day are the same =P
I'm not sure what timezone he's in, so it may still be several hours.
Show Image
(http://i.imgur.com/92h1BQD.jpg)
Show Image
(http://i.imgur.com/Sk3VQzd.jpg)
Green Tea 綠茶
:eek: :eek: :eek:
I've finally received my Goo - Tokyo meetup edition! :D
It's beautiful, than you Juahenza :thumb:
More
I took some pics but the quality is really poor (http://imgur.com/a/hSrJ1 (http://imgur.com/a/hSrJ1)) :(