[GB] DSA Scientific (closed)

[voodoo6k]

Is this set still expected to ship on August 12, as it states on TheKey.Company?

I haven't got any news from SP about DSA Scientific (even though I'm in contact with them for another project).

Not sure where TKC got August 12 from... August is still the expected ship date, derived from the 10 weeks ETA (after order).

I will update as soon as I have more info!

Following up on this. Aug 12 is only 4 days from now. Is that when it will ship from the vendor, or is that when it'll ship from vendor to customers?

No no no... August 12 on TKC's website is wrong. I looked at GMK Skiidata and the date is the same, so it must be a placeholder date from when they overhauled the website. (no idea...)

I still have no date from SP on shipping. The "August" shipping date is calculated from the normal DSA doubleshot production time estimate, which is 10 weeks from payment.

As far as I am concerned, production should finish and ship to the vendors in August, assuming there are no delays.

As mentioned in the previous post, I will update as soon as I have further info.

Updated our page. Spoke to Melissa yesterday. We are on track for delivery before the end of August. I set the ESTIMATED fulfillment date as 9/01 and will update again when we get more info.

Thank you

[MrFurrior]

Really looking forward to getting my hands on the set 

[rumlyne]

Me too ^^

What case are you guys planning to use with it?

[IOVERCALLHISTIOCYTES]

Have a ducky pocket I use in calculator mode more than as a numpad, thought this would be fitting. Base, dunno.

[TheKeyCompany]

Me too ^^

What case are you guys planning to use with it?

I’m going to cerakote a left handed Candybar in a blue color. At least, that’s my tentative plan.

[yui_]

Me too ^^

What case are you guys planning to use with it?

I'm putting it on the Gergo split keeb, and also waiting for soran to run the efreet again to put it on that too

[Zacharius]

I’m mostly just hoping that I will like DSA profile


Sent from my iPhone using Tapatalk

[Mekberg]

I’m mostly just hoping that I will like DSA profile


Sent from my iPhone using Tapatalk

Haha, I have the exact same thinking. Never used DSA before, hope I don’t hate it

[rumlyne]

I’m going to cerakote a left handed Candybar in a blue color. At least, that’s my tentative plan.

I too have been thinking about ceracoating a case but I don't know if I can/want to afford it. Also which case? This set cries for sth. simple yet classy... Candybar case looks good but I prefer the 60-65% form factor. M0110 Modern or kishsaver maybe? Or Grid600? Could work with all of them but they're all so gosh darn expensive

[voodoo6k]

I’m mostly just hoping that I will like DSA profile


Sent from my iPhone using Tapatalk

Of course you will like it

[Rayndalf]

I originally joined this on a whim for the affordable ortho support and almost completely forgot about it, but the colors are really starting to grow on me and its the only buy I'm in that is on/ahead of schedule, so good job!

Novelties extra avail when?

[voodoo6k]

Novelties extra avail when?

As soon as we get them. There will be a few at each proxy.

[voodoo6k]

Me too ^^

What case are you guys planning to use with it?

I'm really looking forward to seeing it on Race 3, Planck and Ducky Pocket, among others!

[MrFurrior]

I've got a UT47 I use for work, but would like to get a preonic so I can use some more of the set/novelties

[jimboytacos]

Any update if this will ship this month? Originally it was set for August 12th?

[voodoo6k]

Any update if this will ship this month? Originally it was set for August 12th?

Latest from TKC:

Updated our page. Spoke to Melissa yesterday. We are on track for delivery before the end of August. I set the ESTIMATED fulfillment date as 9/01 and will update again when we get more info.

[jimboytacos]

My apologies. You did say that. And I did read it. But my dumbass cannot remember. Ugh . Too many GB to keep track of this summer. Also a lot of great sets making a comeback.

[voodoo6k]

DSA Scientific ships out from Signature Plastics to vendors tomorrow August 30, 2019.

[MrFurrior]

Not long now then 

[jimboytacos]

DSA Scientific ships out from Signature Plastics to vendors tomorrow August 30, 2019.

Yay!

[fn]

YES! exciting

[voodoo6k]

All Canadian orders have SHIPPED!

Edit:

It was brought to my attention that some buyers may not have received their shipping info (tracking number, etc.) thru a Canada Post email.
If that is your case, then please reply to any yakk.shop email (such as an invoice) or directly to: orders@yakk.shop
If this issue is widespread, I will resend every tracking number individually.

[voodoo6k]

https://www.reddit.com/r/MechanicalKeyboards/comments/d3s4kx/dsa_scientific_in_morning_light/

[fn]

https://www.reddit.com/r/MechanicalKeyboards/comments/d3s4kx/dsa_scientific_in_morning_light/

  they look fantastic! hope my mykeyboard.eu order gets shipped out soon

[cfiggis]

Any word on US shipments?

[voodoo6k]

Any word on US shipments?

From TKC on Discord:

As some of you may know, SP sent off Scientific to the wrong address, despite me providing my new warehouse info as well as my own UPS account number to use.
The package was supposed to be redirected and held at the local UPS hub for us to pick up.
Well, UPS only held 1/7 of the packages :-(

TL;DR DSA Scientific wont ship until next week. Sorry for the bad news.

Sh!t happens. Especially with large shipments like this one.

[ilezia]

Got my tracking information from mykeyboard.eu 

[KeyCap75]

Got my tracking information from mykeyboard.eu 

me too 

[sevenseacat]

cmonnnnnn ZF

[Slice]

Got my tracking information from mykeyboard.eu 

me too 

Same Here! Can't wait for the kit to arrive 

[drc]

My sets just arrived, they look lovely. One problem, though: The ISO enter keys don't fit my Vortex Race 3

The stabilizers are in the wrong place, see attached picture. The grey key in the middle is the original Race 3 key, the other two are the DSA scientific keys. Was there another ISO enter key for the Race 3?

[voodoo6k]

My sets just arrived, they look lovely. One problem, though: The ISO enter keys don't fit my Vortex Race 3

The stabilizers are in the wrong place, see attached picture. The grey key in the middle is the original Race 3 key, the other two are the DSA scientific keys. Was there another ISO enter key for the Race 3?

Oh crap...

Let me look into this.

Edit: Response from SP:

The ISO enter key was actually just brought to our attention yesterday afternoon. We are working on re-running these but likely won’t be ready to ship them out until Monday.

Sorry about that! You will get replacements. Keep those as novelty items!

[voodoo6k]

The (Canadian) extras are available on yakk.shop.

Now is the time to get your novelty kit that you missed!



No ISO available! (fortunately/unfortunately...)

[drc]

Oh crap...

Let me look into this.

Edit: Response from SP:

The ISO enter key was actually just brought to our attention yesterday afternoon. We are working on re-running these but likely won’t be ready to ship them out until Monday.

Sorry about that! You will get replacements. Keep those as novelty items!

Thanks for the quick reaction! I ordered mine via mykeyboard.eu, do I have to notify them or will all that be taken care of?

[voodoo6k]

Oh crap...

Let me look into this.

Edit: Response from SP:

The ISO enter key was actually just brought to our attention yesterday afternoon. We are working on re-running these but likely won’t be ready to ship them out until Monday.

Sorry about that! You will get replacements. Keep those as novelty items!

Thanks for the quick reaction! I ordered mine via mykeyboard.eu, do I have to notify them or will all that be taken care of?

You should probably still alert them, although I think they already know since either they or another buyer got to SP before I did.

Thanks!

[Mekberg]

So... yeah. The ISO Enter is wrong. Not sure how that is even possible, what boards even use that narrow spacing?

Do I register a complaint with mykeyboard, or is this a systemic issue that will be handled centrally?

[sevenseacat]

It's already been addressed earlier in the topic

[Mekberg]

It's already been addressed earlier in the topic

Ah, right, my bad. I missed the reply to that convo.

Guess I'll send an e-mail to mykeyboard just to let them know and wait. Thankfully I just bought my first ANSI keyboard, so maybe the kit won't go to waste in the meantime either way

[voodoo6k]

It's already been addressed earlier in the topic

Ah, right, my bad. I missed the reply to that convo.

Guess I'll send an e-mail to mykeyboard just to let them know and wait. Thankfully I just bought my first ANSI keyboard, so maybe the kit won't go to waste in the meantime either way

I don't know how it happened, but we're sending out replacements as soon as we get them.

[voodoo6k]

Photo by u/Nicolaidavies

https://www.reddit.com/r/MechanicalKeyboards/comments/d6try6/scientific_race/

[voodoo6k]

Photo by Juwen Ho @nrg84

https://www.instagram.com/p/B2kvcHWFKum/

[Slice]

DSA scientific x Tofu65

[sevenseacat]

Cmonnnnn ZF

[cijanzen]

[hottrout]

I ordered with mykeyboard.eu but I do not have any shipping info yet.  Is anyone else waiting on them?

[voodoo6k]

I ordered with mykeyboard.eu but I do not have any shipping info yet.  Is anyone else waiting on them?

I can't say... perhaps check with Mykeyboard thru email or Discord. (They may be holding on to the ISO orders, like TKC.)

The new ISO Enters were sent out by SP a few minutes ago.

[Slice]

My set is from MyKeyboard.eu

[TimNL]

I ordered with mykeyboard.eu but I do not have any shipping info yet.  Is anyone else waiting on them?

I am also still waiting for shipping info from them. Did not order any ISO keys.

[Starius]

Show Image

Ah, what a great board/keyset pair up. 
It's kind of giving me a '90s business finance vibe.  I dig it.  :thumb:

[hottrout]

Show Image

Best looking combo I have seen in a while.  Great choice for that board.