Build one for $10 in materials?
Build one for $10 in materials?
i think it's REALLY hard to build a desk with height-adjustable legs for less than a taxi ride.
I love my geekdesk max. You can buy just the frame and mount a table top from Ikea onto it.
http://www.geekdesk.com/ (http://www.geekdesk.com/)
I love my geekdesk max. You can buy just the frame and mount a table top from Ikea onto it.
http://www.geekdesk.com/ (http://www.geekdesk.com/)
ur freaking NUTs... $800 for a steel frame table that probably cost $20 to produce.?
ur freaking NUTs... $800 for a steel frame table that probably cost $20 to produce.?
I'd love to see where I could buy that much raw steel for $20, nevermind the motor or the electronics....
ur freaking NUTs... $800 for a steel frame table that probably cost $20 to produce.?
I'd love to see where I could buy that much raw steel for $20, nevermind the motor or the electronics....
Steel is $0.47 per pound at the most, so you should be able to buy 50 pounds of steel for $20.
ur freaking NUTs... $800 for a steel frame table that probably cost $20 to produce.?
I'd love to see where I could buy that much raw steel for $20, nevermind the motor or the electronics....
Steel is $0.47 per pound at the most, so you should be able to buy 50 pounds of steel for $20.
I've never seen slabs of steel for sale anywhere for (pick up)
I've seen aluminum slabs though.
The Wirecutter (http://thewirecutter.com/reviews/the-best-standing-desks/) has a great overview for standing desk that served me well in selecting mine.
I opted to buy the Geek Desk v3 legs and then attach them to my Ikea desktop. I started a Photo Gallery (http://www.flickr.com/photos/mashby/sets/72157637062590005/), but didn't finish posting all the photos yet. A photo of the completed setup is below.
Hope that helps!Show Image(http://l.mashby.com/u0Un+)
There are actually quite a few options at different price points. I've been looking to build my own standing desk lately, so here's some stuff I found.
- Standing desk for $22 (IKEA hack) (http://iamnotaprogrammer.com/Ikea-Standing-desk-for-22-dollars.html)
- Steel pipe+IKEA Numerar countertop build log (http://spacekat.me/blog/2012/07/31/steel-pipe-standing-desk/)
- IKEA Numerar build log w/ Ergotron arm (http://blogjunkie.net/2012/08/custom-diy-standing-desk-with-ergotron-arm)
If you're looking to purchase and not DIY build, the Wirecutter's post (http://thewirecutter.com/reviews/the-best-standing-desks/) that other people linked is a great reference.
Post pics and possibly a review when you land a new desk!
Check the link in my sig, Geekdesk FTW.
Is there a particular chair or stool you like? Some of the standing stools I've seen cost more than a desk would :(
Is there a particular chair or stool you like? Some of the standing stools I've seen cost more than a desk would :(
My work provided me with a Series 5 by Steelcase (http://www.steelcase.com/en/products/category/tables/adjustable/series5/pages/overview.aspx). Aside from the slightly smallish desktop, it's been rock solid.
Also, I did a Craigslist search and some college kid in a nearby town was looking to sell a standing desk. It was this model you can get off Amazon:
http://www.amazon.com/gp/product/B002WRGIMI/ref=s9_simh_gw_p201_d1_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0HXEYJV5NMVG1EFVK95E&pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846
I will pick it up on Saturday, and see how it works. I know it will be some particle board piece of junk, but the frame is steel. Perhaps I will be able to throw a solid piece of wood on the desk if I can. Who knows. I am not too concerned about the quality of the wood because my laminate piece of junk desk has lasted me a good couple of years.
The same manufacturer also makes an adjustable height desk, but it old goes about 4 inches higher than the non-adjustable version.
http://www.amazon.com/Safco-1929CY-Adjustable-Stand-Up-Workstation/dp/B001MS70Z2/ref=pd_sim_hg_3
Also, I did a Craigslist search and some college kid in a nearby town was looking to sell a standing desk. It was this model you can get off Amazon:
http://www.amazon.com/gp/product/B002WRGIMI/ref=s9_simh_gw_p201_d1_i1?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0HXEYJV5NMVG1EFVK95E&pf_rd_t=101&pf_rd_p=1688200382&pf_rd_i=507846
I will pick it up on Saturday, and see how it works. I know it will be some particle board piece of junk, but the frame is steel. Perhaps I will be able to throw a solid piece of wood on the desk if I can. Who knows. I am not too concerned about the quality of the wood because my laminate piece of junk desk has lasted me a good couple of years.
The same manufacturer also makes an adjustable height desk, but it old goes about 4 inches higher than the non-adjustable version.
http://www.amazon.com/Safco-1929CY-Adjustable-Stand-Up-Workstation/dp/B001MS70Z2/ref=pd_sim_hg_3
thanks alot!!! i read this post much earlier, but was too lazy to reply :/
I actually saw this desk a couple of year ago (the adjustable one) and I couldn't believe someone was charging $500 for such a small desk. I promptly threw it out of my brain forever. It's a bargain compared to the standard 1K desks now; even though it's like double the price in canada.
thanks again!
Nice follow up, OP. How big is your monitor? 24"?
Also, someone should start a 'Post your standing desk/workstation thread' in the media section. :)
I'm having trouble seeing why someone would want to pay $250 for that conversion kit, when they could get a single column electrical adjustable desk for a little less than twice that much.
I'm having trouble seeing why someone would want to pay $250 for that conversion kit, when they could get a single column electrical adjustable desk for a little less than twice that much.
A conversion kit, for changing a normal desk into a standing desk.
http://www.gizmag.com/the-upstanding-desk/31211/Show Image(http://images.gizmag.com/gallery_lrg/the-upstanding-desk-1.jpg)
The Geekdesk is OK. I have the large one I eventually set up for my kids computer. It's a rather cheap Chinese setup though that is also sold under other labels. The "it should cost $20" comment is uninformed, Sit/Stand desks are a speciality item that aren't free. At any rate the problem with the Geekdesk is that the main desk has a tendency to warp over time unless you use the cable bar underneath as support. It's also a rather dumb design frankly, just being a big slab of particle board.
The absolutely best sit/stand desk is Herman Miller using a Baker Manufacturing base. The keyboard stand on this is to die for, and the corner units are the best (you get a large selection of desk tops). industrial strength and the best ergonomically. The down side is they cost $1500 each.
Just saw this on Kickstarter. It's a new standing desk called Stand Desk (https://www.kickstarter.com/projects/2036834894/the-most-affordable-automatic-sit-to-stand-desk) and it looks like early-bird pricing has it at $400 for a complete desk.
Just saw this on Kickstarter. It's a new standing desk called Stand Desk (https://www.kickstarter.com/projects/2036834894/the-most-affordable-automatic-sit-to-stand-desk) and it looks like early-bird pricing has it at $400 for a complete desk.
Looks awesome! Finally an inexpensive standing desk that have the same features as an expensive one.
1. Motorized Desks Are Expensive
The most common questions and concerns our customers have about this type of standing desk are related to the cost. Because of the technology added to the desk, the cost will typically be greater than a comparable sitting desk. While the sticker price might shock you, it’s important to note that you get what you pay for. Opting for the cheapest standing desk might get you standing sooner; however, issues with cheap standing desks are more likely to occur within the first 12 months.
Buying Tips: It’s important to look at the brand and how long they have been producing a product. Most of the motorized sit to stand desks are actually being produced by other companies. While longer warranties are important and should be considered during your purchase, a manufacturer’s track record can tell you a lot about the products durability. Find out who the actual manufacturer is and research them in greater detail. Motorized standing desks have been around a long time and the manufacturers of the best components are located in Europe. Only within the last five to six years have the Chinese manufacturers begun to produce the motors, gears, and other electronics found in most motorized desks. We highly recommend brands that are utilizing components from companies, such as Linak, Oelschläger Metalltechnik (OMT), LogicData, and Ketterer. These companies have proven to be leaders in the field since the inception of the motorized standing desk category.
...
Reasons for Standing Desk Instability
There are a lot of reasons why a standing desk will have stability issues. The problem goes beyond the traditional cross support. It’s important that we address these issues so that when you’re shopping you know what to look for. While some of these will require testing the desk, others can be spotted through pictures. Knowing what to look for and the questions to ask will ensure you don’t end up with an unstable desk.
...
No Traditional Cross Support
While this one would appear to be obvious, the lack of a traditional cross support almost guarantees a desk will have lateral stability issues. While all cross supports were not created equal, those used on the VertDesk v3 and GeekDesk v3 are good examples of a good cross support. While many brands say their standing desks are just as stable without a cross support, the truth is that’s not physically possible. I imagine most shoppers are savvy enough to see through these claims.
Lack of Wedge System
While desks without traditional cross supports suffer lateral stability issues, there are ways to improve these problems. The Uplift Desk is a good example, with the use of a wedge in the upper portion of their column they have improved their lateral stability. While this won’t be equal to a desk with a cross support, it is a big improvement over standing desks that do not feature a traditional cross support.
...