Filled the form cause I really love the case.
Reddit ppl are raging a bit too much over the price imo, but it’s definitely very Steep.
If you could really offer an 350 or less no weight option that would be very much preferred.
Incase it adds cost, you could also remove the triangle dots logo imo.
I really just hope the hole price debate doesn’t kill your interest in running this, because I would very much love to get one.
Filled the form cause I really love the case.
Reddit ppl are raging a bit too much over the price imo, but it’s definitely very Steep.
If you could really offer an 350 or less no weight option that would be very much preferred.
Incase it adds cost, you could also remove the triangle dots logo imo.
I really just hope the hole price debate doesn’t kill your interest in running this, because I would very much love to get one.
Took me like 10 minutes clicking around to find the form without realizing the font was white :\
Looks really cool. Do you have any side photos of the board?
Filled out the form. Board looks very interesting :thumb:
Are there any tenting options? Or maybe some aluminum feet to give it an angle?
Any brass plate sample photo?
Hard to choose al or brass
Also, did pcb support this layout?
Also, did pcb support this layout?
Invoice paid. Been wanting to try out the split staggered layout ever since I missed out on the VE.A :thumb:
Have a few more questions.
1) Any expected ship date?
2) Does the pcb fit hotlite sockets for switch swapping? Specifically zeals.
3) Will cables be included or will we have to get those elsewhere?
4) Can we get blank weights? I enjoy getting custom things engraved on my weights.
ergh, paid but screwed up my ship to address. How can I change this?
Looks really cool. Do you have any side photos of the board?
https://imgur.com/gallery/5NiVe (https://imgur.com/gallery/5NiVe)
Note that there are a few mistakes in the USB holes that will be fixed in the final design (different heights). I'm also considering make them more elegant.
Show Image(https://i.imgur.com/noyXHzK.jpg)
1) Factory quoted me around 1 month to have the units complete but Chinese New Year is in the middle so we will see.
2) I'll have to check
3) I will include cables
4) I will offer blank weights if there is enough interest from GB members. (5 or more)
Any brass plate sample photo?
Hard to choose al or brass
Also, did pcb support this layout?Show Image(https://i.imgur.com/fj0SMUw.jpg)
Yes I can support that layout on the PCB and plate
stuck at 11?
Shot you an email about getting this layout. Not sure how often you check mail, just wanted to make sure I got the request to you in time.
(Attachment Link)
Shot you an email about getting this layout. Not sure how often you check mail, just wanted to make sure I got the request to you in time.
(Attachment Link)
I submited files for the order to the factory without this layout. That being said manufacturing is not going to start until after CNY. I will get in touch with the factory tonight and see if I can update the file for the right half of the plate.
I doubt that they have starting programming the machines and I know machining hasn't started, so I don't see this change being a problem and will keep you posted.
The OP says in switch LEDs but I'm not sure what that means?
Ohh so like normal leds in a switch? Haha I was thinking it was something I hadn't heard ofThe OP says in switch LEDs but I'm not sure what that means?Show Image(http://www.legitreviews.com/images/reviews/2078/mxblue-switch.jpg)
The OP says in switch LEDs but I'm not sure what that means?Show Image(http://www.legitreviews.com/images/reviews/2078/mxblue-switch.jpg)
If you really want this layout PM me and we'll work something out. Thanks all!
Does anybody have any recommendations on tenting solutions?
Sent from my ONEPLUS A5010 using Tapatalk
Does anybody have any recommendations on tenting solutions?
Sent from my ONEPLUS A5010 using Tapatalk
Super interested!Does anybody have any recommendations on tenting solutions?
Sent from my ONEPLUS A5010 using Tapatalk
I'm going to be working with a vendor for a small run of wooden tenting kits. Let me know if you're interested.
Hi All,
Another update! Boards are currently being CNC'd.
Let me know if you're curious about anything else.
Will there be any extras available for purchase? I am really disappointed I missed this buy.
Hi All,Pm'd!! Plz give me one. XD
If you are interested in a tenting kit please PM me. There will be 5 available and they will be $100 each shipped to you. They will be made of walnut by woodkeys.click (http://woodkeys.click)!
Thanks
Can we get some images of the tenting kits. If not, at least a rendering/ drawings of them please. Thanks!
Hi All,
Looks like the rework happened sooner than I expected and the boards will ship today :). Also, for the list of people who wanted the arrows layout I have jaymaikan, PandaRooooong, WilySouser, and spiritjeon. Please PM if you want the arrow layout so I can discuss with you.
Thanks!
Hi All,Good to see that update :D
Looks like the rework happened sooner than I expected and the boards will ship today :). Also, for the list of people who wanted the arrows layout I have jaymaikan, PandaRooooong, WilySouser, and spiritjeon. Please PM if you want the arrow layout so I can discuss with you.
Thanks!
Have you received the boards?
Damn just saw this so sad I missed it.
What size are the spacebars? 2.25u and 2.75u?
Hi All,
Picked up the boards from the post office yesterday and did QC and initlal packing for all of them.
Some problems I want to make you all aware of:
- 5 of the weights for the left half of the board do not fit properly. I am getting replacements for these. Orders will be fulfilled in the order in which they were placed. I will notify you if you will have delayed shipment.
- The manufacturer pulled kind of a bait and switch on me with regards to the overall quality of the boards. The multiple prototypes I have received are flawless from the inside to the outside. The outside of the boards are flawless and look amazing, but there are visible tooling marks on the insides of the boards. Obviously these are not visible when the boards are assembled but I want to make you all aware and see your thoughts.
- The PCBs are in assembly right now and should be in my hands next week. I will receive them and then flash the QMK firmware and verify all of the buttons are working as desired.
- The cables are arriving this week
Thanks for being patient with the group buy I hope to start fulfilling orders in the coming weeks!
Hi All,
Picked up the boards from the post office yesterday and did QC and initlal packing for all of them.
Some problems I want to make you all aware of:
- 5 of the weights for the left half of the board do not fit properly. I am getting replacements for these. Orders will be fulfilled in the order in which they were placed. I will notify you if you will have delayed shipment.
- The manufacturer pulled kind of a bait and switch on me with regards to the overall quality of the boards. The multiple prototypes I have received are flawless from the inside to the outside. The outside of the boards are flawless and look amazing, but there are visible tooling marks on the insides of the boards. Obviously these are not visible when the boards are assembled but I want to make you all aware and see your thoughts.
- The PCBs are in assembly right now and should be in my hands next week. I will receive them and then flash the QMK firmware and verify all of the buttons are working as desired.
- The cables are arriving this week
Thanks for being patient with the group buy I hope to start fulfilling orders in the coming weeks!
Do you have any pictures of the tooling marks on the inside? I'm not too worried as long as the outside looks good and that seems to be the case.
Also thanks for the constant updates! Always appreciated from a group buy organizer!
I have attached 2 images. The part circled in blue is the tooling marks. The silver is my prototype for QXP that has no tooling marks.
Hi All,If mine is similar to the one shown I don't care about that on the inside
Picked up the boards from the post office yesterday and did QC and initlal packing for all of them.
Some problems I want to make you all aware of:
- 5 of the weights for the left half of the board do not fit properly. I am getting replacements for these. Orders will be fulfilled in the order in which they were placed. I will notify you if you will have delayed shipment.
- The manufacturer pulled kind of a bait and switch on me with regards to the overall quality of the boards. The multiple prototypes I have received are flawless from the inside to the outside. The outside of the boards are flawless and look amazing, but there are visible tooling marks on the insides of the boards. Obviously these are not visible when the boards are assembled but I want to make you all aware and see your thoughts.
- The PCBs are in assembly right now and should be in my hands next week. I will receive them and then flash the QMK firmware and verify all of the buttons are working as desired.
- The cables are arriving this week
Thanks for being patient with the group buy I hope to start fulfilling orders in the coming weeks!
Hi All,Ayy hype
Got the PCBs in today and they are good to go. I'll upload a simple version of the firmware and test out the keys before shipping. I have the cables as well.
Going to start fulfilling orders. Super excited for you guys :thumb:
Thanks
Hi All,
Got the PCBs in today and they are good to go. I'll upload a simple version of the firmware and test out the keys before shipping. I have the cables as well.
Going to start fulfilling orders. Super excited for you guys :thumb:
Thanks
(https://farm2.staticflickr.com/1732/40532860890_f45ca228fa_c.jpg) (https://flic.kr/p/24KKvp9)
SX60 Zilents (https://flic.kr/p/24KKvp9) by thosepeoples (https://www.flickr.com/photos/86496414@N00/), on Flickr
Wooo! Got the board in the mail today and built it up with some 78g Zilents! Thanks again to Quantastrophus for the awesome board! Straight wrists feel great :thumb:
One question how do I go about programming the board?
(https://farm2.staticflickr.com/1732/40532860890_f45ca228fa_c.jpg) (https://flic.kr/p/24KKvp9)
SX60 Zilents (https://flic.kr/p/24KKvp9) by thosepeoples (https://www.flickr.com/photos/86496414@N00/), on Flickr
Wooo! Got the board in the mail today and built it up with some 78g Zilents! Thanks again to Quantastrophus for the awesome board! Straight wrists feel great :thumb:
One question how do I go about programming the board?
Got my board and it is stunning. https://imgur.com/a/FdeZm0h
Sent from my Pixel 2 XL using Tapatalk
Love seeing the first builds pics pop up <3
Are we getting separate invoices for shipping btw?
If so I haven’t gotten one yet ;___;
Love seeing the first builds pics pop up <3
Are we getting separate invoices for shipping btw?
If so I haven’t gotten one yet ;___;
Some orders are delayed waiting for replacement parts.
Is there a PCB design up on OSHpark so we can order ourselves these PCBs?
Whats the new timeframe for the cases that need to be redone?
Uploaded my branch to my GitHub. Still need to write a README and create an info.json so it will work with the online tool :thumb:. Those more experienced with QMK can clone the branch here:
https://github.com/amnobis/qmk_firmware-1/tree/sx60
Same dude I'ma need some help to program this thing lolUploaded my branch to my GitHub. Still need to write a README and create an info.json so it will work with the online tool :thumb:. Those more experienced with QMK can clone the branch here:
https://github.com/amnobis/qmk_firmware-1/tree/sx60
Any progress on the online tool compatibility? I tried my hand at the QMK compiling but I have no idea what I'm doing
Same dude I'ma need some help to program this thing lol
Sent from my Pixel 2 XL using Tapatalk
Same dude I'ma need some help to program this thing lol
Sent from my Pixel 2 XL using Tapatalk
I've watched a couple tutorials vids and read some online guides but I feel like there's a couple pieces missing for me to put it all together :p
Same dude I'ma need some help to program this thing lolUploaded my branch to my GitHub. Still need to write a README and create an info.json so it will work with the online tool :thumb:. Those more experienced with QMK can clone the branch here:
https://github.com/amnobis/qmk_firmware-1/tree/sx60
Any progress on the online tool compatibility? I tried my hand at the QMK compiling but I have no idea what I'm doing
Sent from my Pixel 2 XL using Tapatalk
Maybe I should do a stream on twitch or something showing how to program the board? :cool:
Maybe I should do a stream on twitch or something showing how to program the board? :cool:
That would be very helpful :thumb:
I was bored so I did a thing: https://config.qmk.fm/#/sx60/LAYOUT_ansi_split_bsShow Image(https://uploads.tapatalk-cdn.com/20180606/74ac0228bb376e521d1a4a9aabce4b54.png)
I have no clue if it works or not since I don’t have a sx60, but I’m pretty sure I got the map right based on quantrik’s repo.
If any switches don’t work or are flipped lemme know :P
I was bored so I did a thing: https://config.qmk.fm/#/sx60/LAYOUT_ansi_split_bsShow Image(https://uploads.tapatalk-cdn.com/20180606/74ac0228bb376e521d1a4a9aabce4b54.png)
I have no clue if it works or not since I don’t have a sx60, but I’m pretty sure I got the map right based on quantrik’s repo.
If any switches don’t work or are flipped lemme know :P
:eek: :eek: You're awesome! I've been googling QMK for like 2 weeks now trying to figure out how to make a json for the configurator.
I'm away from my board at the moment but I'll give this a try when I get home and report back :thumb:
**EDIT** Haven't got home yet still, but noticed that the right shift is not split. How do you go about making a custom layout for the configurator?
**EDIT2** I'm dumb found the drop down menu ha
So did it work? Lol
I had to figure out the layout manually, it’s the info.json in the repo itself.
I did all the layouts I could think of and a default one that I think has all the keys, but I could have missed something.
Any updates on replacement part schedule?
Got the rest of the replacement parts today in the mail. Need to test fitment still but I think we should be all set! You'll get a shipment notification via PayPal if your board is on the way.
I was bored so I did a thing: https://config.qmk.fm/#/sx60/LAYOUT_ansi_split_bsShow Image(https://uploads.tapatalk-cdn.com/20180606/74ac0228bb376e521d1a4a9aabce4b54.png)
I have no clue if it works or not since I don’t have a sx60, but I’m pretty sure I got the map right based on quantrik’s repo.
If any switches don’t work or are flipped lemme know :P
Here is my build.
https://imgur.com/a/j3CQjFE
The board is really great. I am very happy with it all!
Now come on... Mr. NovelKeys himself is not going to tell us what switches he's using??
Hi all,
Got the rest of the replacement parts today in the mail. Need to test fitment still but I think we should be all set! You'll get a shipment notification via PayPal if your board is on the way.
Thanks
Has everyone received theirs?
Hi All,
Update: QC'ing the PCBs and flashing base firmware for the rest of the orders and packing them up. Everything will be shipped out by Tuesday morning. After everyone has received their boards please contact me ASAP for replacement parts and we can work something out. Only one participant has expressed any need for a replacement piece so far so I don't expect it to be a big order. I just prefer that all the replacements are ordered together.
I'll give everyone until July 20th to contact me for any replacements they may need then the order will go in.
Thanks for being patient and I hope you all enjoy your boards :thumb:
Hi All,
Update: QC'ing the PCBs and flashing base firmware for the rest of the orders and packing them up. Everything will be shipped out by Tuesday morning. After everyone has received their boards please contact me ASAP for replacement parts and we can work something out. Only one participant has expressed any need for a replacement piece so far so I don't expect it to be a big order. I just prefer that all the replacements are ordered together.
I'll give everyone until July 20th to contact me for any replacements they may need then the order will go in.
Thanks for being patient and I hope you all enjoy your boards :thumb:
Have you consider delays of Parts beeing stuck in customs quantas?
I honestly doubt I will even receive my boards before July 20th, but then again I also doubt I’m going to need replacements.
Anyway just wanted to let you know July 20th seams unreasonable to me since I would have to request replacements before receiving my actual order
Of anyone is interested I have an online gray with brass plate I decided not to keep.So you mean you have a complete keyboard for sale or just parts? :P if it’s the first; dibs.
Sent from my ONEPLUS A6003 using Tapatalk
I'm still waiting on my replacement part. You told me that it would be manufactured after the factory got through the QXP group buy but it's well past that now and you've moved on to other group buys. I don't think you've forgotten as I've sent messages to you on multiple platforms over the past 10 months and have yet to hear any type of response.
Just a word of warning about Quantastrophus for all.
I'd PM you but you seem to be ghosting me. I can send you the very last of our conversation if you'd like. I sent you a PM on January 21, 2019 quoting the very last of what you told me in August 2018 about you sending a replacement part. We can contact the admin if you want to verify this.
I don't know where you're getting the July 2018 from???