[GB] Noxary 280 & 220 (Wrapping Up)

[pixelpusher]

Waiting to see some 9009 on the green before I decide on changes

Show Image

Thanks

[pixelpusher]

Filled in the form and sent you a PM on discord, xondat.  Getting excited about this board 

[farfar]

Dunno when you updated the spreadsheet (or if you have at all), but I answered the form and changed color to Crimson red 2 days ago (?) but it is still Blue gray on the spreadsheet, would be appreciated if you could tell me if you haven't had time to update the spreadsheet<3

[xondat]

Dunno when you updated the spreadsheet (or if you have at all), but I answered the form and changed color to Crimson red 2 days ago (?) but it is still Blue gray on the spreadsheet, would be appreciated if you could tell me if you haven't had time to update the spreadsheet<3

Spreadsheet is up to date all

[xondat]

Form closed... Will update sheet tomorrow and then figure out quantities etc. Still waiting on one part (the plate annoyingly) to build this new prototype, however that's been delayed a little because of the typhoon etc.

[sJ1N]

The forms are still open for me but i assume this is closed by now ? Im kinda late LOL

[radio_killah]

What's the tentative timely now?

[nug]

What's the tentative timely now?

There isn't one yet.

[xondat]

The forms are still open for me but i assume this is closed by now ? Im kinda late LOL

Still open because people drop out, probably able to pick a spot up, although I haven't checked the forms in a while.

What's the tentative timely now?

Been working on it, but having some irl problems right now which is taking a lot of time/mental space. I want to have these in production by the end of the month so will update then.

[wholypantalones]

The forms are still open for me but i assume this is closed by now ? Im kinda late LOL

Still open because people drop out, probably able to pick a spot up, although I haven't checked the forms in a while.

What's the tentative timely now?

Been working on it, but having some irl problems right now which is taking a lot of time/mental space. I want to have these in production by the end of the month so will update then.

Everything should ship late September without delays!

Just a guess, but I'm guessing these won't ship late September without delays!

[mdlt97]

[xondat]

These will enter production next week. My apologies for the wait.

I have 8 or so spare slots if anyone still feels like jumping in. These will become preset slots (probably in rarer colors to help production) so if you want something specific I'd recommend joining, please PM if interested.

[sana]

Hi xondat,

Can you get back to me on my PM regarding my slot?

Thanks

[sJ1N]

Hi xondat,

i also sent you a PM regarding available slots.

Thanks

[xondat]

Hi xondat,

Can you get back to me on my PM regarding my slot?

Thanks

Still waiting for a reply from you

Hi xondat,

i also sent you a PM regarding available slots.

Thanks

Replied

[sana]

Did you really just say "still waiting", when you've been taking up to a week+ to respond to people's issues or flat out ignore them, and only just yesterday replied to me?

Furthermore, you only replied to tell me to message you on Discord. What's wrong with using geekhack? I'm really not a fan of Discord and I'd prefer keeping GH GB related issues on geekhack.

[xondat]

Did you really just say "still waiting", when you've been taking up to a week+ to respond to people's issues or flat out ignore them, and only just yesterday replied to me?

Furthermore, you only replied to tell me to message you on Discord. What's wrong with using geekhack? I'm really not a fan of Discord and I'd prefer keeping GH GB related issues on geekhack.

Thought I’d ping here just so you’re aware.

Well considering you’ve blocked me on Discord which means I can no longer access our chat history where you bought many of the parts through, it’s necessary in this case. I’ll await your response on there.

[sana]

I haven’t blocked anyone - I only left your Discord server and we don’t have any mutual servers (again, I don’t really like using Discord). The only thing in our PM history is me asking to change plates.

All I’ve asked is to drop me out as well before manufacturing starts. I’ve specified the invoice numbers I paid, and the dates/amounts I paid, totalling to about $1.2k. You refunded 2 other users I know of last Thursday.

[friglesnart]

Pm'ing on discord about any available spots

[blarblarjosh]

Sent you a PM if any spots are still available.

[donut_sauce]

Hi Xondat, Did these ever enter production? Is there a clear timeline yet?

[wholypantalones]

Nevermind.

[radio_killah]

Will we see these by November? Ideally would like to see these before the 180 day paypal dispute window closes.

[xondat]

Hi Xondat, Did these ever enter production? Is there a clear timeline yet?

Yes; no. I plan on visiting the factory when they're doing QC

Will we see these by November? Ideally would like to see these before the 180 day paypal dispute window closes.

I think it's too early to comment but the invoices can always be redone so it's extended.

[donut_sauce]

I think it's too early to comment but the invoices can always be redone so it's extended.

What's the process for getting the invoices redone/extended?

[xondat]

I think it's too early to comment but the invoices can always be redone so it's extended.

What's the process for getting the invoices redone/extended?

I'll PM everyone, but basically it'll be opt-in, I'll copy your invoice, you pay it, I refund the old one.

[kolashnikov]

I'm interested. Will PMs go out as email, or do I need to keep an eye on geekhack or discord for PMs?

[xondat]

I'm interested. Will PMs go out as email, or do I need to keep an eye on geekhack or discord for PMs?

Only Geekhack.

[megaforce]

hello sir could I please change my ano to gluten-free ano?

thank you and have a nice day

[dwarflemur]

Just sent a PM, need to change my address.

[Oblotzky]

Just sent a PM, need to change my address.

Shipping is invoiced later on, with which you enter your final address AFAIK. So should be irrelevant for now.

[dwarflemur]

Oh okay, cool, I wasn't sure. I'm switching jobs and would really prefer not to have it show up to my previous one if possible.

[xondat]

Just sent a PM, need to change my address.

Shipping is invoiced later on, with which you enter your final address AFAIK. So should be irrelevant for now.

Thanks, yeah this is correct. @dwarflemur.

[xondat]

Per an update in X60 R, I think it's important to clarify.

Bad news inc.

I got the hex keys and was testing the threads out. M2 screws do not fit into the bottom pieces. I asked my contact and he said "The holes are M2 threaded holes, the loose problem must be caused by several times anodizing".

This applies to all bottom pieces unfortunately. I'll be sending them back and they'll make new replacements.

As a general statement, I won't be using this factory again, although I think that goes without saying.

The factory used for X60 R is not the same one being used for 280 & 220.

[homiechicken]

WTS my spot, 280 WK Bluegrey/2PCB/Fix Red Alu Plate + 280 Wrist rest.

[xondat]

I've had a few people ask me if these are in production, so I want to clarify/make it clear:

280/220 are in production. I'm expecting an ETA when they complete more parts and have a better idea

[Etherealsound]

I've had a few people ask me if these are in production, so I want to clarify/make it clear:

280/220 are in production. I'm expecting an ETA when they complete more parts and have a better idea

Dang, getting so hyped. Can't wait for some photos.

[Etherealsound]

Any update on the production? Are we looking at a possible deliver date before the end of November?

[megaforce]

Probably shouldn't expected that soon -- machining alone will take 5-8 weeks on a good schedule...

c:

[xondat]

Yeah what Adam said.

Also I'll have a form up shortly regarding invoice extending. Thanks.

[kolashnikov]

Yeah what Adam said.

Also I'll have a form up shortly regarding invoice extending. Thanks.

  thanks for this update. I've been wondering about that.

[xondat]

Just sent out the form for invoice refreshing. I couldn't PM the following people, so please PM me with proof of invoice etc.

cswanic
strangeprisoner
alkaiser04

If you didn't receive the message but you are in the buy, please PM me your information too. Thanks.

[xondat]

Forgot to say.. I'll give this a week, and start working through them after that. The first one should expire in 10 days time.

[alkaiser]

Oh for some reason, my geekhack user info is listed as alkaiser04 instead of just alkaiser. I filled out the form just now

[xondat]

Oh for some reason, my geekhack user info is listed as alkaiser04 instead of just alkaiser. I filled out the form just now

No worries, I fixed the info I have because I figured it was you lol

[donut_sauce]

Hi Xondat, Once we pay the new invoice how long will will we have to wait to receive the refund for the original  invoice?

[xondat]

Hi Xondat, Once we pay the new invoice how long will will we have to wait to receive the refund for the original  invoice?

If I'm awake, probably 1-2 minutes. If I'm asleep, it'll be when I work on them that day.

[marre259]

Selling my spot: 280 WKL Blue Gray, 5mm Brass, 1x PCB, 2x 7U stabs

[catamscott]

kicking myself for not getting in on a 220 while orders were still open, if anyone's got buyer's remorse let me know 

[odd]

if I don't opt for a refresh are you saying that I cannot get a refund no matter what happens?