How long will the form be open?
can i get a version without screws, preferably with magnets?
can i get a version without screws, preferably with magnets?
seems nice than my ziplock bag. good going greg.
Thanks, everyone for the interest and enthusiasm! I'll probably close the form on Friday and will then start sending invoices.Seriously though, it displays your talent for design. Seriously considering dropping the cash.can i get a version without screws, preferably with magnets?
Nah bruh, you can get velcro thoseems nice than my ziplock bag. good going greg.
Thanks daniel
Form closed, I'll start sending out invoices this evening when I get home from work.
Thanks everyone for your interest!!
Invoices sent :)
If we can gather funds over the weekend, I'd love to pull the trigger on the machine order on Monday or Tuesday.
Will also be sure to keep this thread updated with production happenings!!
Thx,
hayt
Quick update: thank you, everyone, for completing the invoices! I've submitted the production order to the machine shop on Monday, and they are quoting me for an early June delivery to the bead blasting shop in ATL. With any luck, we may be able to start shipping these out in mid-June. More to follow. GHVery exciting! I'd appreciate a shipping info confirmation before shipment as I expect to move in mid June. I would be wary of USPS forwarding to be honest. Please do add a note to my order!
Quick update: thank you, everyone, for completing the invoices! I've submitted the production order to the machine shop on Monday, and they are quoting me for an early June delivery to the bead blasting shop in ATL. With any luck, we may be able to start shipping these out in mid-June. More to follow. GH
Quick update: thank you, everyone, for completing the invoices! I've submitted the production order to the machine shop on Monday, and they are quoting me for an early June delivery to the bead blasting shop in ATL. With any luck, we may be able to start shipping these out in mid-June. More to follow. GHVery exciting! I'd appreciate a shipping info confirmation before shipment as I expect to move in mid June. I would be wary of USPS forwarding to be honest. Please do add a note to my order!
Sent from my mobile using Tapatalk
Lids are in from laser cutting. I will leave the paper film on the lids when shipping out to avoid any scratches and for that nice peel.
Machined case bottoms should be arriving at the bead-blaster here in ATL within the next couple weeks, more to follow.
(Attachment Link)
Lids are in from laser cutting. I will leave the paper film on the lids when shipping out to avoid any scratches and for that nice peel.
So bummed I arrived late to this beautiful party :'(
Any chances of round 2?
bead blasting
How much savings do you think a round 2 produced overseas would have. I really like the screws and other features this case has over the evil box or even my crappy tackle box case.
These are awesome, are you ever making any more of them?
No lie I'm sad I sat out on this one as well, still followed the thread but I was all like ahhh well I got the evil box an the ano'd alu box... The more I see this one the more I absolutely need it .. Beautiful design Hayt. keep it up! (Make a keyset one too if you manage to source thru cn)
These are awesome, are you ever making any more of them?
Hi All, quick update. I have received the parts back from bead blasting and am proceeding with packing and preparing for shipment.Ah bummer, it seems I will have to wait for the manufacturer update. Thanks for the GB update! It's been a smooth ride thus far nonetheless.
A few notes on the parts received:
1) Out of the 50 cases ordered, I have identified 10 that I find have unacceptable machining defects from the manufacturer. These include sizeable chips in the perimeter of the case, cracked bottom, and chipped internal partitions. I have a note out to the machine shop and will await their direction for either replacing or refunding these defective parts.
2) Of the 40 that are in good shape, I will begin shipping these out this week. I will go by invoice order for shipping.
3) If you are in the tail end of the invoices (40-50), we will have to sit tight and wait to hear back from the manufacturer.
4) There is some slight variation in the thread tolerances on the nylon thumb screws. If you receive a case with a tight thumb screw, it will loosen over time with a bit of use. Some of the later cases may ship with an alternative steel threaded bolt (plastic head).
I appreciate everyone's continued support. If you have any questions feel free to contact me directly on Discord or Slack. More to follow
(Attachment Link)
Hi All, quick update. I have received the parts back from bead blasting and am proceeding with packing and preparing for shipment.Thanks for the great communication so far hayt. Looking forward to getting this case!
A few notes on the parts received:
1) Out of the 50 cases ordered, I have identified 10 that I find have unacceptable machining defects from the manufacturer. These include sizeable chips in the perimeter of the case, cracked bottom, and chipped internal partitions. I have a note out to the machine shop and will await their direction for either replacing or refunding these defective parts.
2) Of the 40 that are in good shape, I will begin shipping these out this week. I will go by invoice order for shipping.
3) If you are in the tail end of the invoices (40-50), we will have to sit tight and wait to hear back from the manufacturer.
4) There is some slight variation in the thread tolerances on the nylon thumb screws. If you receive a case with a tight thumb screw, it will loosen over time with a bit of use. Some of the later cases may ship with an alternative steel threaded bolt (plastic head).
I appreciate everyone's continued support. If you have any questions feel free to contact me directly on Discord or Slack. More to follow
(Attachment Link)
Are our invoice numbers also our case number or did you assign slots based on something else like when the invoice was paid?
nice one boys, looking goodReal Discrimination against Australians happening here...
I think I'm in the defective batch group, can't wait to get it tho
Sent from my ONEPLUS A5000 using Tapatalk
Hi All,
To the remaining 7 still awaiting their cases, I have received confirmation that a remake has been issued by the machine shop. I will update with timing as soon as I know more. Sorry for the inconvenience + extended lead time <3
More to follow,
hayt
For anyone taking their cases to the upcoming meetups, don't forget to use the travel foam!
Also, if you have any feedback on ways to improve the design for travel purposes, please don't hesitate to share!
Thanks,
Hayt
Hi All, quick update. I have received the parts back from bead blasting and am proceeding with packing and preparing for shipment.Looks so good .Nice job
A few notes on the parts received:
1) Out of the 50 cases ordered, I have identified 10 that I find have unacceptable machining defects from the manufacturer. These include sizeable chips in the perimeter of the case, cracked bottom, and chipped internal partitions. I have a note out to the machine shop and will await their direction for either replacing or refunding these defective parts.
2) Of the 40 that are in good shape, I will begin shipping these out this week. I will go by invoice order for shipping.
3) If you are in the tail end of the invoices (40-50), we will have to sit tight and wait to hear back from the manufacturer.
4) There is some slight variation in the thread tolerances on the nylon thumb screws. If you receive a case with a tight thumb screw, it will loosen over time with a bit of use. Some of the later cases may ship with an alternative steel threaded bolt (plastic head).
I appreciate everyone's continued support. If you have any questions feel free to contact me directly on Discord or Slack. More to follow
(Attachment Link)
All remaining cases have been shipped! Thanks all for your support.Thankyou bruva
I currently have one left-over and 3 more trays without lids. In order to order 3 more lids, they will run me ~$30 each due to the high cost for ordering a small quantity. Once I can obtain those lids I will do a left-over raffle for the remaining (4) cases. TY <3
Any plans to have a R2? =)
Any plans to have a R2? =)
I have interest in this as well ^-^
Any plans to have a R2? =)
I have interest in this as well ^-^
I'd love to have another round as well.
Thanks All for your interest. Currently, I am all out of extras from R1.
There is a possibility for an R2 in the future. Playing around with a few ideas including switching from acrylic to aluminum for the body, and magnets instead of screws. At some point, I'll post up a new IC thread.
Thank you!
hayt
Any plans to have a R2? =)
I have interest in this as well ^-^
Any plans to have a R2? =)
I have interest in this as well ^-^
Thirded!