Author Topic: [GB] Zepsody Display 15 | Orders Shipped  (Read 49600 times)

0 Members and 1 Guest are viewing this topic.

Offline The Equals D

  • Thread Starter
  • Posts: 67
  • Location: Texas
[GB] Zepsody Display 15 | Orders Shipped
« on: Fri, 07 April 2023, 15:53:50 »
Zepsody Display 15 Artisan Tray Group Buy

Live April 7 - April 21 @ 11:59pm Central Time



Information
15 Slot Artisan Tray
Material - Anodized 6063 Aluminum (E-white will be E-coated)
Angle - 10 Degrees
Weight - 8oz
Lead Time - 2-4 Months
Price - $30 ($50 AUD for Allcaps)


Vendors
Zepsody (US & International)
Allcaps (OCE)


Description
Our goal with the Display 15 was to create a high-end artisan display tray at a low price. While the keyboard market has been flooded with ultra-expensive artisan trays, affordable high-quality options have been too few and far between. The Display 15 is here to fix that problem.


Available Colors




Photos from Batch 1





Social Media Photography
HiKeebs
Captain Sterling
Karan Chauhan
inhale_exhale.jpg
R4bbl3d4bbl3


Zepsody Social Media
Discord       Instagram
« Last Edit: Tue, 19 September 2023, 18:51:40 by The Equals D »

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 11449
  • Location: WI
Re: [GB] Zepsody Display 15 | GB Is Live
« Reply #1 on: Sat, 08 April 2023, 16:39:12 »
Approved :thumb:

Offline The Equals D

  • Thread Starter
  • Posts: 67
  • Location: Texas

Offline The Equals D

  • Thread Starter
  • Posts: 67
  • Location: Texas
Re: [GB] Zepsody Display 15 | GB Is Live
« Reply #3 on: Thu, 20 April 2023, 13:56:26 »
Friendly reminder that the GB ends tomorrow. Ty to everyone who has joined thus far, we have outsold expectations :D

Offline The Equals D

  • Thread Starter
  • Posts: 67
  • Location: Texas
Re: [GB] Zepsody Display 15 | In Production
« Reply #4 on: Mon, 29 May 2023, 12:14:21 »
Update:

Cnc production finished about a week ago. The trays are being anodized and e-coated currently. I also decided to get packaging made for this round of trays, which is also in production. No exact ETA yet, but I am hoping I can fulfill the U.S. orders around the end of June, and ship the AUS orders to ALLCAPS at the same time.

Offline EdgeOfInfinity

  • Posts: 341
Re: [GB] Zepsody Display 15 | In Production
« Reply #5 on: Thu, 01 June 2023, 01:12:40 »
cool thnx 4 update

Offline HubertThemad

  • * St. Jude Supporter
  • Posts: 66
Re: [GB] Zepsody Display 15 | In Production
« Reply #6 on: Thu, 01 June 2023, 09:50:22 »
Good luck with everything, Jason! A friend got one of the red ano versions for a giveaway, and she loves it.

Offline CPTBadAss

  • Woke up like this
  • Posts: 14363
    • Tactile Zine
Re: [GB] Zepsody Display 15 | In Production
« Reply #7 on: Mon, 12 June 2023, 09:34:19 »
Update:

Cnc production finished about a week ago. The trays are being anodized and e-coated currently. I also decided to get packaging made for this round of trays, which is also in production. No exact ETA yet, but I am hoping I can fulfill the U.S. orders around the end of June, and ship the AUS orders to ALLCAPS at the same time.

Thanks for the update! Looking forward to getting the tray in  :D

Offline The Equals D

  • Thread Starter
  • Posts: 67
  • Location: Texas
Re: [GB] Zepsody Display 15 | In Production
« Reply #8 on: Fri, 30 June 2023, 15:29:09 »
Update:

Unfortunately production did not finish as quickly as I had hoped in my last update. There were defects found in some units after they came back from anodizing, those units are currently being remade. They should finish soon although I do not have an exact ETA yet. The good news is, most units have finish production and have passed QC.

Attached are pictures of the packaging and some of the red units that are finished.

I will say the same thing here that I told the manu. I would rather delay things a bit to make sure all the units are top quality, than to deliver an inferior product to the GB customers.

I still expect everything to deliver within the original quoted GB window. I will post another update after I have received confirmation that 100% of units are finished and have passed QC.

Ty again to everyone who joined the GB, and I apologize for the delay.




Offline HighonBelvita

  • Posts: 5
Re: [GB] Zepsody Display 15 | In Production | Update 2 Posted
« Reply #9 on: Tue, 11 July 2023, 17:44:32 »
looking forward to receiving mine :D

Offline The Equals D

  • Thread Starter
  • Posts: 67
  • Location: Texas
Re: [GB] Zepsody Display 15 | In Production | Update 2 Posted
« Reply #10 on: Fri, 11 August 2023, 02:45:53 »
Update:

Production has finished!

The trays will be sent to me from my Chinese shipping forwarder tomorrow

« Last Edit: Fri, 11 August 2023, 04:24:59 by The Equals D »

Offline The Equals D

  • Thread Starter
  • Posts: 67
  • Location: Texas
Re: [GB] Zepsody Display 15 | Production Finished | Update 3 Posted
« Reply #11 on: Tue, 19 September 2023, 18:51:18 »
All Display 15 GB Units Ordered Through Zepsody.com Have Shipped!


For International Buyers that are not in Australia
All of your packages were sent to my shipping forwarder (APC Logistics) today. They will recieve them at the end of the week. Please allow up to the end of next week for your tracking to start updating. If it has not updated by then, please email me @ jason@zepsody.com or ping me in the support and questions section of my discord. For more info on how my international shipping works, Please read here https://zepsody.com/blogs/news/international-shipping-information


For Australian Buyers through ALLCAPS.Store
Your packages were sent to ALLCAPS today, also through APC.


Extras Announcement
Extras for http://Zepsody.com will go on sale on September 30th @ 10am Central Time
There will be extras of Black, Red, and Navy. There will be no White extras for now, however there will be another small batch of white units that will come within the next month, and will be sold when they arrive.


Lastly, if you are a U.S. customer and for some reason your tracking has not started updating by the end of the week, please email me or ping me on Discord.


Ty to everybody for joining the GB and ty for your patience.
« Last Edit: Tue, 19 September 2023, 18:53:51 by The Equals D »