super interested!
looks great. IC form submitted
Would love to see a brass weight.
Looks really good. Lovely design.
I wish the polycarb option didnt have the bottom 2 corners blacked out, and instead was full polycarb instead :/
do you have any wkl renders?
I wish the polycarb option didnt have the bottom 2 corners blacked out, and instead was full polycarb instead :/
I really like what I see :)I am so glad you can like him :thumb:
coolllllllllllll :p :p :pThanks :thumb:
I still haven't built my Square 80, but this is looking like another hit. Although I do hate how you guys make the branding so large, at least the implementation is leagues better than how it was on the Square 80. Can't wait for this to come out. Not the biggest 60% fan, but this one of the ones I feel like I need in my life.Believe me I will do better and better, so stay tuned :thumb:
loved the square 80 design but 4mm plate seemed a little too thick, love that this will be offered at 1.5 with half plate option. will try my best to get in on this :D very excitedThank you very much i believe you will like it. :thumb:
I like this keyboard. I would like to buy this keyboard.:thumb: :thumb:
GLWSThank you very much my good friend :thumb:
Show Image(https://i.imgur.com/2pFRjvD.jpg)
I know these are just renders, but does anyone know of any similar keycap sets to this one? I know GMK Lunar is similar-ish, but I'm not sure if I'm 100% down to buy that set or not yet.
Thanks so much for all the kind compliments. We are more than pleased with the progress of of this project at the moment. More amazing photos of prototypes to come! :thumb:Show Image(https://i.imgur.com/2pFRjvD.jpg)
I know these are just renders, but does anyone know of any similar keycap sets to this one? I know GMK Lunar is similar-ish, but I'm not sure if I'm 100% down to buy that set or not yet.
Probably Heavy Industry.
Also, really liking the look of this board. I think I'm set on a 60%, but we'll see.
Would love to see split space support. Nice design. :thumb:We are very grateful for your commendation but split spacebar is unlikely to be an option in this group buy. :D
like it. buy itThanks for the support :thumb: :thumb:
Interested, but could you explain a bit how the gasket would actually work with this kind of design?
Sent from my GM1911 using Tapatalk
Totally missed this - the PC version is nice!
Can we mix and match the top/bottom housing??Currently you can only pick different colors for plate and case.
Amazing design but how can i buy??Stay tuned when the becomes available in the next month or two! Fill out the Google survey if you haven't done so already :thumb:
Is there any projected weight metric for this?
Well this definitely has my attention. Looking great so far!
Great design,man,really nice job!Thanks Gray. :thumb:
I looooooove this. :D I am stuck between the white or black case with the botanical keycaps. any suggestions?
(Attachment Link)
Is there any way you can make this yellow part of the HHKB layout matte/clear like the rest of the keyboard?
Would you be offering PC plate? that'd be interesting(Attachment Link)
Is there any way you can make this yellow part of the HHKB layout matte/clear like the rest of the keyboard?
Unfortunately that's not possible. The yellow parts are part of the plate that are extruding out to serve as the HHKB blockers.
Would you be offering PC plate? that'd be interesting(Attachment Link)
Is there any way you can make this yellow part of the HHKB layout matte/clear like the rest of the keyboard?
Unfortunately that's not possible. The yellow parts are part of the plate that are extruding out to serve as the HHKB blockers.
Would you be offering PC plate? that'd be interesting(Attachment Link)
Is there any way you can make this yellow part of the HHKB layout matte/clear like the rest of the keyboard?
Unfortunately that's not possible. The yellow parts are part of the plate that are extruding out to serve as the HHKB blockers.
This^
Side view:Show Image(https://i.imgur.com/KfZuzUD.jpg)
Will this be available only with the yellow or just in black too?
The one in the back on this picture is completely black, the one in the front is yellow/black, viewed from the top. Is the yellow coming from the plate? And will it be available in all black? Maybe i missed something in your original post and im sorry if i did.Side view:Show Image(https://i.imgur.com/KfZuzUD.jpg)
Will this be available only with the yellow or just in black too?
Not exactly sure what you are asking. If you are asking about the side cutouts, they will show the color of the plate.
The one in the back on this picture is completely black, the one in the front is yellow/black, viewed from the top. Is the yellow coming from the plate? And will it be available in all black? Maybe i missed something in your original post and im sorry if i did.Side view:Show Image(https://i.imgur.com/KfZuzUD.jpg)
Will this be available only with the yellow or just in black too?
Not exactly sure what you are asking. If you are asking about the side cutouts, they will show the color of the plate.
Gesendet von iPhone mit Tapatalk
Instagram:iNETT Studio (https://www.instagram.com/inett.studio/) [ Follow me to see the latest designs ]Good work!! :thumb:
Hello GeekHackers, this is Simen from iNETT STUDIO. Before introducing the new keyboard, I want to apologize to the buyers who joined the SQUARE 80 GB for not delivering the product on time. As a token of apology, people who joined the SQUARE 80 GB will receive a small gift when you join this group buy of SQUARE.X 60.Show Image(https://i.imgur.com/exZSx95.jpg)
Introduction:
This time we will be bringing you the "X" in the SQUARE series by iNETT STUDIO. The SQUARE series share some very defining characteristics. We spent a lot of time to refine the design of SQUARE.X 60 so that it stands out as a unique product, yet similar enough to be recognized as one of the SQUAREs. We started designing this keyboard since October 2019. After countless modifications and revisions, we came up with three versions of the keyboard before finally deciding on the current design which we are very satisfied with. To achieve a more unique appearance, we will be adjusting some details such as implementing thinner side cutouts, narrower side bezels, and a slightly taller forehead.
We are very glad to see that users are paying more attention to the typing feel rather than focusing solely on the appearance of the keyboard. The 4mm thick plate that was used in other SQUARE series will be reduced to 1.5mm, with half plate as an option. SQUARE.X 60 will also be the first in the series to adopt the gasket-mount system. The left and right side of the plate are held in place by the upper and lower cases, whereas the top and bottom of the plate are suspended and supported by rubber strip gaskets that can reduce vibration. Thanks to Luis from iLumkb, we gained valuable insights on utilizing gaskets. We will be testing gaskets of different harnesses for the perfect typing feel once the prototype is made.
If you are interested with SQUARE.X , please take 1 minute to fill IC Form (https://forms.gle/wGq5QShxxYbv6nmJ9)
Features:Case color:
- Mounting Method: Gasket (Hardness to be determined)
- Layout: WKL, WK, HHKB
- Type Angle: 7 Degree
- PCB: Type-C, QMK Programmable, Per Key RGB, Underglow (designed and supported by astro)
Plate color:
- Anodized color:black, blue, red, dark green
- E-color:white
- Anodized color:black, red, dark green, blue
- E-color:white、yellow
Layout:Show Image(https://i.imgur.com/IxUf2S4.png)
Top View:Show Image(https://i.imgur.com/oDQR8mh.jpg)
Side view:Show Image(https://i.imgur.com/KfZuzUD.jpg)
Structure and Details:
(LEDs for underglow will come pre-installed, but they are not shown in these images. Underglow will only show with PC bottom)
With 1.5mm full plateShow Image(https://i.imgur.com/JbBp6Go.jpg)
With 1.5mm half plateShow Image(https://i.imgur.com/yV9JXIL.jpg)
PCB:Show Image(https://i.imgur.com/fTSLrTA.jpg)Show Image(https://i.imgur.com/tubD5Ib.jpg)
Color Options:Show Image(https://i.imgur.com/Oo2zN4a.jpg)Show Image(https://i.imgur.com/bxqJU4E.jpg)Show Image(https://i.imgur.com/8ZAfHtP.jpg)Show Image(https://i.imgur.com/MrPe8r8.jpg)Show Image(https://i.imgur.com/tXAdoQ5.jpg)
PC Version:Show Image(https://i.imgur.com/UUU4Ecu.jpg)Show Image(https://i.imgur.com/OUAY8Mw.jpg)Show Image(https://i.imgur.com/2pFRjvD.jpg)
Polished Chamfer Renders:
The last unique feature of the SQUARE.X 60 is the option to add Polished Chamfer to bring more elegance to the keyboard. Personally, I think this is the highlight of the keyboard which requires delicate manufacturing. This kind of chamfer is not very common in realm of keyboards, and we will show case this more once the prototype is made. I am sure you would love this feature as much as I do!Show Image(https://i.imgur.com/rhvw3mJ.jpg)Show Image(https://i.imgur.com/hTcJ6dL.jpg)
So much for the rendering, stay tuned for photos of the prototype!
Q&A:
- Q1: Hot-swap PCB?
A1: Still under consideration, but unlikely. Due multiple layouts, it’s hard to accommodate everyone with hot-swap. The thinner 1.5mm plate may also influence the typing feel when used with hot-swap.- Q2: Lead time?
A2: Maybe 3-5 months after the GB has ended. Due to coronavirus and the complex design of this keyboard, we don’t have an exact answer at this time.- Q3: When can we see a prototype? And the price?
A3: The prototype is being manufactured and we are expecting it by the end of the month, possibly sooner. The price is $350 before PayPal fees and shipping.- Q4: Limited group buy?
A4: Limited by time but not limited by quantity. All available options will be shared before the GB.- Q5: Brass plate and weight?
A5: There will be a survey question for this. Let us know if you want this as an option and we will consider adding them if there is enough interest.
Closing:
iNETT STUDIO has been around for more than a year now, thank you for all your support over the past year! We will continue to improve and refine our workmanship to make better keyboards, and we will gladly hear your comments and suggestions. Feel free to comment below or contact us at inett.studio@gmail.com.
Last but not least, may all of you have a good health during this coronavirus pandemic and good luck in the year of rat!
Peace & Love,
Simen
======================================================================================================
Stay tuned for the figure image and the sound test.
I saw some pictures of a 65% variant, is that one coming aswell?The Square 68 GB only in China. :D :D
I saw some pictures of a 65% variant, is that one coming aswell?The Square 68 GB only in China. :D :D
5/2/2020 Updates added on the first post :)
Looks good. def looking forward to join! Will there be an option for hotswap pcb for wkl as well?! Is there estimated date for groupbuy? can't wait!
5/2/2020 Updates added on the first post :)
May I ask what went wrong with the gasket mount that you tried?
No brass plate? Oh no :'(
I love this! Do you think you might add Grey ano to the color choice? A grey/yellow would be perfect for me. :thumb:
how programmable will the pcbs be?
Any support for VIA, that would be amazing
I heard from my friends that China ’s GB is over. I really like this design. Damn, when will GH be turned on :thumb:We will make a GB in June :thumb:
I'm interested.Thanks :D
Love the design, this will look great in HHKB white!
Will the hot swap pcb have per key and underglow rgb?Yes,both PCBs have. :thumb:
Sent from my SM-N960F using Tapatalk
Do you have to solder anything if you choose the hotswap model?
Also, are there any videos showing what other iNETT SQUARE keyboards sound like? I couldn't find any on youtube.
Will the polished chamfer be available for every color? And is there any extra cost for that option?
Is the GB still gonna happen in June?
Is polycarbonate pricing the same as aluminium?Is the GB still gonna happen in June?
Most likely yes!
I don't see it explicitly mentioned anywhere but is that a USB-C port I see? 😁
If you wanted a backspace in the top right instead of two 1u keys you'd have to go for the non-hotswap pcb right?
Brass plate plz :'(Sure :D
Will this come with PC plates?Pc plate is too soft will cause deformation, so we will not use Pc plate :thumb:
Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We haven’t started GB yet, but there’s no doubt we’ll be doing GB this month :thumb:
Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We haven’t started GB yet, but there’s no doubt we’ll be doing GB this month :thumb:
You should be able to configure it how you please. It is a split backspace I believe so you can choose if you want it where it used to be or one row below on the 1.5u key.Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We havenâ€t started GB yet, but thereâ€s no doubt weâ€ll be doing GB this month :thumb:
Love the design choices and would love be part of the gb! Is there a discord or are all updates on this thread? Thanks
EDIT: OK so stupid question, where is the backspace on the hotswap PCB?
You should be able to configure it how you please. It is a split backspace I believe so you can choose if you want it where it used to be or one row below on the 1.5u key.Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We havenâ€t started GB yet, but thereâ€s no doubt weâ€ll be doing GB this month :thumb:
Love the design choices and would love be part of the gb! Is there a discord or are all updates on this thread? Thanks
EDIT: OK so stupid question, where is the backspace on the hotswap PCB?
Sent from my iPhone using Tapatalk
You should be able to configure it how you please. It is a split backspace I believe so you can choose if you want it where it used to be or one row below on the 1.5u key.Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We havenâ€t started GB yet, but thereâ€s no doubt weâ€ll be doing GB this month :thumb:
Love the design choices and would love be part of the gb! Is there a discord or are all updates on this thread? Thanks
EDIT: OK so stupid question, where is the backspace on the hotswap PCB?
Sent from my iPhone using Tapatalk
Oh right, I assumed because its the hotswap layout it would be fixed. Thanks
You should be able to configure it how you please. It is a split backspace I believe so you can choose if you want it where it used to be or one row below on the 1.5u key.Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We havenâ€t started GB yet, but thereâ€s no doubt weâ€ll be doing GB this month :thumb:
Love the design choices and would love be part of the gb! Is there a discord or are all updates on this thread? Thanks
EDIT: OK so stupid question, where is the backspace on the hotswap PCB?
Sent from my iPhone using Tapatalk
Oh right, I assumed because its the hotswap layout it would be fixed. Thanks
You should be able to configure it how you please. It is a split backspace I believe so you can choose if you want it where it used to be or one row below on the 1.5u key.Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We havenâ€t started GB yet, but thereâ€s no doubt weâ€ll be doing GB this month :thumb:
Love the design choices and would love be part of the gb! Is there a discord or are all updates on this thread? Thanks
EDIT: OK so stupid question, where is the backspace on the hotswap PCB?
Sent from my iPhone using Tapatalk
Oh right, I assumed because its the hotswap layout it would be fixed. Thanks
I think he meant that it is configurable in the sense that you can program the backspace into any position you like.
But the switch layout for the hotswap PCB is indeed fixed.
Ahhh snap that’s right. I wasn’t clear enough, my bad. Thanks for clarifying <3.You should be able to configure it how you please. It is a split backspace I believe so you can choose if you want it where it used to be or one row below on the 1.5u key.Maybe I missed it, but is this going to be a limited group buy or unlimited group buy?We havenâ€t started GB yet, but thereâ€s no doubt weâ€ll be doing GB this month :thumb:
Love the design choices and would love be part of the gb! Is there a discord or are all updates on this thread? Thanks
EDIT: OK so stupid question, where is the backspace on the hotswap PCB?
Sent from my iPhone using Tapatalk
Oh right, I assumed because its the hotswap layout it would be fixed. Thanks
I think he meant that it is configurable in the sense that you can program the backspace into any position you like.
But the switch layout for the hotswap PCB is indeed fixed.
ah yes yes. i see what he meant now. :)
Show Image(https://i.imgur.com/CowV3Lh.jpg)
can someone please tell me what keyset this is or something similar to this?
Can you get the HHKB layout with the hotswap PCB?
How about WKL lay-out? I think it is possible tooCan you get the HHKB layout with the hotswap PCB?
The hotswap layout is tsangan (7u space), so the answer is yes.
Can you get the HHKB layout with the hotswap PCB?
The hotswap layout is tsangan (7u space), so the answer is yes.
The hotswap layout is tsangan (7u space), so the answer is yes.How about WKL lay-out? I think it is possible too
Can you get the HHKB layout with the hotswap PCB?
The hotswap layout is tsangan (7u space), so the answer is yes.
But for a hotswap pcb, how do you split the backspace into \ and `?
Hot-swap PCB layout:Show Image(https://imgur.com/0of2SBj.jpg)
Will the USB-C cutout be made in the shape of a USB C port? Think Nathan (Taeha Types) mentioned that he was bothered that it was a square cut in the prototype.
Will the USB-C cutout be made in the shape of a USB C port? Think Nathan (Taeha Types) mentioned that he was bothered that it was a square cut in the prototype.
Will the USB-C cutout be made in the shape of a USB C port? Think Nathan (Taeha Types) mentioned that he was bothered that it was a square cut in the prototype.
I'm actually more concerned that there was a need to use masking tape to reduce rattle of the plate! Would that be addressed?
Hey everyone! Latest update on the first post, GB coming up soon!Hey would it be possible to show a video of the final prototype just so we can take a look at what the product we would be receiving would look like? For example with the fixed plate issues and such?