Author Topic: G80-8113HUBUS-2/LUAUS-0 ANSI {all gone} (Read 28516 times)

IvanIvanovich · « **on:** Thu, 30 August 2012, 23:01:26 »

ALL GONE

hashbaz · « **Reply #1 on:** Thu, 30 August 2012, 23:19:26 »

In for one!

DanGWanG · « **Reply #2 on:** Thu, 30 August 2012, 23:19:26 »

Im in for 1!!

tsangan · « **Reply #3 on:** Thu, 30 August 2012, 23:19:46 »

I'll be in for one too

MMB · « **Reply #4 on:** Thu, 30 August 2012, 23:20:18 »

ill grab one.

feng · « **Reply #5 on:** Thu, 30 August 2012, 23:22:34 »

I'll take one. Thanks!

oTurtlez · « **Reply #6 on:** Thu, 30 August 2012, 23:25:12 »

I want but I no wanna spend the $$$ My wallet is already hurting...

IvanIvanovich · « **Reply #7 on:** Thu, 30 August 2012, 23:27:11 »

Also, if you prefer, I would be willing to desolder all the switch for a $10 fee if you do not want the entire board and save on shipping a little. Estimated shipping for keyboard in US would be $16, International $30.

yuiop · « **Reply #8 on:** Thu, 30 August 2012, 23:28:46 »

In for one. Thanks.

jil_jil32 · « **Reply #9 on:** Thu, 30 August 2012, 23:36:58 »

In for one.

IvanIvanovich · « **Reply #10 on:** Thu, 30 August 2012, 23:39:43 »

PM sent to those who have posted so far.

litster · « **Reply #11 on:** Thu, 30 August 2012, 23:41:34 »

one for me please.

fruktstund · « **Reply #12 on:** Thu, 30 August 2012, 23:43:59 »

In for one if shipping would be less than $30. Otherwise, I'm out!

Just saw your post about shipping lysol, so I'll just say I'm in.

kaiserreich · « **Reply #13 on:** Thu, 30 August 2012, 23:45:32 »

In for one

IvanIvanovich · « **Reply #14 on:** Thu, 30 August 2012, 23:51:32 »

10 down 6 left. PM sent to all posted so far. Also, if you have not added your location to profile, please post it if you want to pay shipping up front. If I have sent a pay for shipping later message and you want to pay all up front for entire board shipping you know the applicable rates and adjust the total accordingly when pay.
Thanks.

dorkvader · « **Reply #15 on:** Fri, 31 August 2012, 00:41:45 »

I'm interested!

zyth3x · « **Reply #16 on:** Fri, 31 August 2012, 02:48:14 »

I'm interested if these are actual clears and shipping isn't too steep to Australia.

limmy · « **Reply #17 on:** Fri, 31 August 2012, 03:56:18 »

The exact same model was sold here on GH classified and it says they are browns not clears.
http://geekhack.org/index.php?topic=14302.0

The caps alone will sell quickly at $45+(from the looks of the condition of the caps) and browns probably at $20, so the pricing seem to be pretty decent even if it is browns.

hamza_tm · « **Reply #18 on:** Fri, 31 August 2012, 04:23:00 »

woohoo! put me in please

i think I'll pay shipping up front too

TDub · « **Reply #19 on:** Fri, 31 August 2012, 06:12:20 »

I would like one if you can ship to germany (I can cover extra shipping if needed!)

Autolyze · « **Reply #20 on:** Fri, 31 August 2012, 06:34:05 »

Agh, I probably shouldn't, but I can't help myself. I'm in for one.

jdcarpe · « **Reply #21 on:** Fri, 31 August 2012, 07:04:53 »

I'm in if there are any left

IvanIvanovich · « **Reply #22 on:** Fri, 31 August 2012, 08:59:25 »

And that looks like they are all spoken for. Clears were confirmed with seller not assumed by me. I asked many questions before negotiating this price down from $90 a board. PMs sent. Please everyone get paid up asap I already have an invoice waiting to be paid for all of these. The faster you pay, the faster they are in the mail.

limmy · « **Reply #23 on:** Fri, 31 August 2012, 09:11:42 »

It is interesting they have both clears and browns for the same model number.

Either way, pretty good deal!

jdcarpe · « **Reply #24 on:** Fri, 31 August 2012, 09:13:31 »

Yes, Cherry used the same model number code for both browns and clears. You have to physically check the board to tell which it has.

DanGWanG · « **Reply #25 on:** Fri, 31 August 2012, 09:40:06 »

I haven't asked YUIOP yet, but I was wondering if we could combine shipping somehow...and if it'd be cheaper. Any idea lysol?

IvanIvanovich · « **Reply #26 on:** Fri, 31 August 2012, 11:26:20 »

That is fine with me if you want to arrange something to ship together. 2 boards cost same since flat rate priority 23" x 12" x 3" box, I think can fit 2 boards in there.

jil_jil32 · « **Reply #27 on:** Fri, 31 August 2012, 14:09:09 »

Sorry, I think I don't actually need those switches and caps anymore, so I'm out.
There is one board left! Get it now!

IvanIvanovich · « **Reply #28 on:** Fri, 31 August 2012, 14:34:48 »

There was waiting list, so duq is up for jil_jil32's spot. If anyone else drops out, dante is next.

IvanIvanovich · « **Reply #29 on:** Fri, 31 August 2012, 16:54:54 »

6 have still not paid, please pay within 48 hours or I will start giving your spots away to waiting list. I want to move this along and avoid delays for all involved. Thanks.

danielucf · « **Reply #30 on:** Fri, 31 August 2012, 17:00:02 »

Put me on the waiting list in case some lazy bum doesn't pay.

tsangan · « **Reply #31 on:** Fri, 31 August 2012, 17:08:50 »

Looks like someone can take mine, I found me the keys I was looking for from this keyboard

Going to PM lysol too

IvanIvanovich · « **Reply #32 on:** Fri, 31 August 2012, 18:10:20 »

dante and danielucf have taken the two spots left by tsangan and magicmeatball. PM incoming guys.

dorkvader · « **Reply #33 on:** Fri, 31 August 2012, 20:27:00 »

Are these PS2 or USB?

demik · « **Reply #34 on:** Fri, 31 August 2012, 20:30:58 »

according to bini, USB.

ISO version was PS2

IvanIvanovich · « **Reply #35 on:** Fri, 31 August 2012, 20:41:06 »

HUBUS vs HPBUS U for usb, P for ps/2... one of the only sensible Cherry designations... but watch it, it is not always true LOL. But these are USB, I didn't think to mention it before. Bad on me for just assuming people would harvest the boards for other uses.

dorkvader · « **Reply #36 on:** Fri, 31 August 2012, 21:15:22 »

Quote from: lysol on Fri, 31 August 2012, 20:41:06

HUBUS vs HPBUS U for usb, P for ps/2... one of the only sensible Cherry designations... but watch it, it is not always true LOL. But these are USB, I didn't think to mention it before. Bad on me for just assuming people would harvest the boards for other uses.

Yeah, I plan on using mine with my other one (in Browns, from reptile) as the best split keyboard ever.

Thanks for the info on the moder numbers. Can you also elucidate me as to the difference between this HUBUS and my HUAUS?

(Sending payment now)

IvanIvanovich · « **Reply #37 on:** Fri, 31 August 2012, 21:44:15 »

3 digit model codes, I know them, 5 digit model codes are like deciphering the mysteries of the universe. Basically with the 5digit all I care about is first letter and the 2 letter language code at the end. whatever is in between I figure out later. Usually has interface and switch for 2nd and 3rd but not consistent.

The_Ed · « **Reply #38 on:** Fri, 31 August 2012, 21:44:32 »

Third letter is for the card reader (number of/which tracks) for quite a few POS board models.

IvanIvanovich · « **Reply #39 on:** Fri, 31 August 2012, 21:58:27 »

I guess there is another opening again, someone claim it.

The_Ed · « **Reply #40 on:** Fri, 31 August 2012, 22:09:32 »

I only buy new POS boards... I can't stand it if I know somebody else used it... Plus I still have to pay a few hundred for the nixie chessboard... That price is good though so somebody will snatch it up before tomorrow. GLWS.

jcrouse · « **Reply #41 on:** Fri, 31 August 2012, 22:16:51 »

taken

demik · « **Reply #42 on:** Sat, 01 September 2012, 00:57:09 »

Quote from: The_Ed on Fri, 31 August 2012, 22:09:32

I only buy new POS boards... I can't stand it if I know somebody else used it... Plus I still have to pay a few hundred for the nixie chessboard... That price is good though so somebody will snatch it up before tomorrow. GLWS.

well aren't you fancy!

The_Ed · « **Reply #43 on:** Sat, 01 September 2012, 02:08:14 »

Quote from: demik on Sat, 01 September 2012, 00:57:09

well aren't you fancy!

Anal-retentive is the word you're looking for.

IvanIvanovich · « **Reply #44 on:** Sat, 01 September 2012, 09:25:19 »

litster has given up their spot, so still one board available. I went ahead and paid the invoice to get them moving. Should be with me by end of next week.

DanGWanG · « **Reply #45 on:** Sat, 01 September 2012, 09:36:13 »

Why is everyone dropping?

jcrouse · « **Reply #46 on:** Sat, 01 September 2012, 12:05:52 »

Quote from: DanGWanG on Sat, 01 September 2012, 09:36:13

Why is everyone dropping?

Kinda wondered that myself.

IvanIvanovich · « **Reply #47 on:** Sat, 01 September 2012, 12:15:04 »

Some stated they found the few keycaps they wanted off the boards elsewhere. Other stated financial reason. No big deal, others stepped up to claim those boards and I have paid for all of them so there wouldn't be anymore delay.

Zwi · « **Reply #48 on:** Sat, 01 September 2012, 13:16:51 »

Quote from: lysol on Sat, 01 September 2012, 09:25:19

litster has given up their spot, so still one board available. I went ahead and paid the invoice to get them moving. Should be with me by end of next week.

I'll take it if its still available.

IvanIvanovich · « **Reply #49 on:** Sat, 01 September 2012, 15:01:29 »

Sure thing Zwi, PM'd.

IvanIvanovich · « **Reply #50 on:** Sat, 01 September 2012, 16:02:45 »

All boards accounted for and paid. A few of you I still need to get back with on shipping options. Thanks everyone.

IvanIvanovich · « **Reply #51 on:** Wed, 05 September 2012, 16:52:31 »

Got update that these are on the way to me USPS2306 1570 0001 0730 3864.

hashbaz · « **Reply #52 on:** Wed, 05 September 2012, 16:53:21 »

w00t!

danielucf · « **Reply #53 on:** Wed, 05 September 2012, 19:45:36 »

Oh man they are coming from Daytona? I could have driven over there to pick mine up

dorkvader · « **Reply #54 on:** Wed, 05 September 2012, 21:46:21 »

Quote from: lysol on Wed, 05 September 2012, 16:52:31

Got update that these are on the way to me USPS2306 1570 0001 0730 3864.

https://tools.usps.com/go/TrackConfirmAction_input?origTrackNum=23061570000107303864

Insured, proof of delivery and signature confirmation: Snazzy!

IvanIvanovich · « **Reply #55 on:** Mon, 10 September 2012, 19:24:24 »

Good news is I received the keyboards today.
Bad news is many of you are likely to be quite disappointed. Only 9 of them are doubleshots, and NONE of them have clears, all browns.
I have tried to contact the seller about this, but have not heard back yet. I of course will do my utmost to get this all resolved and refunds issued as soon as possible.
I am terribly sorry.

DanGWanG · « **Reply #56 on:** Mon, 10 September 2012, 19:27:57 »

That is really unfortunate news...

Keep us updated!

yuiop · « **Reply #57 on:** Mon, 10 September 2012, 19:30:01 »

Thanks for the update lysol

IvanIvanovich · « **Reply #58 on:** Mon, 10 September 2012, 19:37:31 »

Are there 9 of you that were mostly interested in the doubleshots only that are ok with the price paid? They all are in very very good shape, near mint. At least we have that.

danielucf · « **Reply #59 on:** Mon, 10 September 2012, 19:40:58 »

What are the options you think may take place? Shipping them all back for refund, keeping the double shots, etc.

edit: It seemed like a great deal before because clears and double shots for either regular use and/or for parts. Browns are less enticing for switch harvesting but I was excited to get my first cherry double shots and cherry keyboard. If the consensus is this is still a good deal I might be interested still, even this keyboard with browns is pretty pricey on ebay.

I can't remember, is this the model where the ctrl, alt, etc keys will fit most ansi keyboards without needing to buy a moogle kit?

IvanIvanovich · « **Reply #60 on:** Mon, 10 September 2012, 19:44:56 »

I have no idea how reasonable the seller is going to be at this point. They flat out lied to me, so I don't have high hopes. Ideally, I would like to be able to let 9 of you have the good boards, and have them resolve the rest of it in a sane manner. But if they aren't reasonable and I have to file paypal dispute, I am not sure what will happen then.

Yes, the doubleshots ones are exactly as the one pictured in the OP, ANSI and no moogle needed as it has the real thing.

danielucf · « **Reply #61 on:** Mon, 10 September 2012, 20:52:40 »

Well I'm interested, especially if they get cheaper somehow.

IvanIvanovich · « **Reply #62 on:** Mon, 10 September 2012, 21:10:43 »

Well it's not looking good so far. I have been arguing with them in emails now for 2 hours. After testing them 3 are also broken. It's looking like it will have to hopefully be resolved through paypal at this point, they really are not being reasonable. Either way I can afford to refund 5 people right now out of my own money. I don't think it's fair for all of you to have to wait for it to get resolved. Sorry I can't do better than this right now. First 5 to PM me will get the refund immediately. The others will have to wait, and I apologize.

Edit: I finally got them to agree to refund me on the broken ones at least, so as long as 9 of you still want the doubleshots ones, I can live with slowly recouping some of my loss by selling a f*ckton of brown switches, and the pbt sets. So that means I should be able to refund 7 of you now. If there are not 9 of you that do still want these, let me know and I can just have another that is interested in a board pay you directly. This is the best I can do for now, and I hope you all understand.

Autolyze · « **Reply #63 on:** Mon, 10 September 2012, 21:50:25 »

I'm cool with a working one that has doubleshots. I figure that I can grab the doubleshots for myself and give the board (with other keycaps) to a friend who still doesn't have a Cherry MX keyboard.

danielucf · « **Reply #64 on:** Mon, 10 September 2012, 21:59:05 »

What are cherry PBTs like?

Also you couldn't know that they would lie to you so if it takes a brick off I'd like my first Cherry keyboard and I'll stick with my order.

sth · « **Reply #65 on:** Mon, 10 September 2012, 22:02:34 »

black cherry PBT? i am curious. might be interested if these go up for sale.

dorkvader · « **Reply #66 on:** Mon, 10 September 2012, 22:08:33 »

Quote from: danielucf on Mon, 10 September 2012, 21:59:05

What are cherry PBTs like?

Also you couldn't know that they would lie to you so if it takes a brick off I'd like my first Cherry keyboard and I'll stick with my order.

I'm pretty sure the black cherry non doubleshot keys are actually POM. I have a set, and they are really awesome.

Lysol: This is bad news! I hope we can get it sorted out. I was actually not worried about the keycaps (Wanted to sell those and use the aforementioned lasered set), but I was only interested in clears, since I already have an 8113 with browns.

Keep us updated. I'm sure we can resolve this properly.

sth · « **Reply #67 on:** Mon, 10 September 2012, 22:09:57 »

If they are POM... i am not a big fan... the legends are raised and feel weird and uneven, and all the other bad things people say about pom. Shiny, kind of unpleasant to me.
Still get the wonderful F J scoops though!

IvanIvanovich · « **Reply #68 on:** Mon, 10 September 2012, 22:20:08 »

Got 9 with doubleshots 8113HUBUS-2 and the 5 are white pbt 8113LUAUS-0.

Just like this one, and 2 with pom and the crappy ISO enter which were broken and one pbt one is broken.

Like I said, just let me know what you all want to do, if you want a refund I can make it happen now for several people. I want to make it right so I will be taking care of you myself and worry about recouping my loss. If someone is interested in a 8113LUAUS-0 I can work out a deal for that as well. Asides from the 3 broken ones that are all in very good shape at least.

jcrouse · « **Reply #69 on:** Mon, 10 September 2012, 22:25:20 »

You can keep my money until you figure this all out. If my board goes to someone else, I am also OK with that. As far as I am concerned, anything is ok. If you need to hold the funds a while, so be it. It's already paid for, I'm only out a set of caps, not a biggie. Whatever works for you Lysol.

Thanks for your efforts.

jdcarpe · « **Reply #70 on:** Mon, 10 September 2012, 22:30:27 »

Sorry you got screwed by the seller on this deal. This in no way reflects badly on you. You are doing a great job trying to handle this in the best way you can.

hashbaz · « **Reply #71 on:** Mon, 10 September 2012, 22:41:50 »

There's no need for you to fall on your sword here, lysol. Selling browns and POM keysets is not going to recoup 7 x $60. We all went in on this together, and we should all share the loss. I'm not sure how to resolve this fairly, but I can't take my money back and let you eat all the consequences.

IvanIvanovich · « **Reply #72 on:** Mon, 10 September 2012, 22:54:26 »

It's such a great community here. I appreciate all of you for being understanding. If some want to work out some other arrangement like a partial refund or something, just PM me and we can discuss it. You're absolutely right, it won't allow me to recoup 100%, but I felt it was the right offer to make. It's not those who participated fault I got f*cked on a bad deal either.

IvanIvanovich · « **Reply #73 on:** Mon, 10 September 2012, 23:07:43 »

Near new, except the one broken.

oTurtlez · « **Reply #74 on:** Mon, 10 September 2012, 23:08:38 »

If any more come available, let me know

yuiop · « **Reply #75 on:** Mon, 10 September 2012, 23:19:07 »

I feel really bad because I PMed lysol for refunds when I saw that 'first 5 get refund' post. It was almost a knee-jerk reaction on my part (too much time spent on classified? lol) and I didn't realize lysol was in danger of eating huge chunk of money by himself. Lysol, I have that money sitting in my paypal account, please let me know if there's anything I could do. Just want to let you know I'm willing to share the loss. Thanks.

IvanIvanovich · « **Reply #76 on:** Mon, 10 September 2012, 23:44:12 »

I really am not sure how to work it out so it is fair for everyone. As far as the doubleshots boards go I think the price is still pretty good for near new ansi set even if the switch type was the wrong one. Problem was not enough to go around due to the circumstances. I offered the refund because I felt it was the correct thing, so I can't fault any that accepted it. If you want to share in the loss that is up to you and I will certainly appreciate it.

fruktstund · « **Reply #77 on:** Tue, 11 September 2012, 13:48:19 »

For me $60 is a good price for the doubleshots, but the $30 for shipping a keyboard with browns here seems a bit crazy, so that I'd like to skip.
Then again I have no idea if I'm allowed a set of doubleshots, since everyone can't have one.

I'm not in any hurry to get any money back, so please keep it until we get this solved somehow. I agree with hashbaz though, and think we should share the loss. Alas I have no idea how we could make it fair for everybody.

IvanIvanovich · « **Reply #78 on:** Tue, 11 September 2012, 14:04:13 »

Like for example, I can give you partial refund on the shipping, send you the caps only and keep the browns to sell. That would be an easy way for you to share the loss.

fruktstund · « **Reply #79 on:** Tue, 11 September 2012, 14:20:23 »

Good thinking! Sounds very much fair to me. Still sounds like you'd lose on this deal overall, even though maybe not as much.

DanGWanG · « **Reply #80 on:** Wed, 12 September 2012, 09:30:09 »

Dunno how I missed the thread updates!

Anyway, lysol you can do whatever you want with my money for now and you can send me whatever lol. Whatever makes it easiest on you. This was a group buy, and everyone involved should have known there may have been some risks, like with any purchase. If I can eventually get a refund, or get shipped some doubleshots, or lasered keycaps, it doesn't matter to me. Whatever you deem fair will be fair with me.

Hope that eases some of the problem...

IvanIvanovich · « **Reply #81 on:** Wed, 12 September 2012, 11:15:07 »

I think it mostly settled, still waiting to hear back from 2 people, but those that wanted refunds have mostly gotten them, and ones who still want the doubleshot there should be enough for those that want them. The broken ones I am parting out, and I guess I will try and sell the working LUAUS ones whole first whether here or on ebay.
Yes, I am stuck with these. The invoice didn't have the full model number on it only 8113 which all of them were, and I got refund for the broken ones so paypal does not see anything to my argument.

DanGWanG · « **Reply #82 on:** Wed, 12 September 2012, 11:40:41 »

How much for the LUAUS ones shipped? Are they browns underneath too?

IvanIvanovich · « **Reply #83 on:** Wed, 12 September 2012, 11:50:07 »

Yes they are browns, and in near new shape. I will get some pictures of everything up later tonight or tomorrow at the latest. If I could get $50 for the LUAUS that would be ideal to minimize money loss, but I doubt I will be able to ge quite so much out of them here.

DanGWanG · « **Reply #84 on:** Wed, 12 September 2012, 12:05:38 »

PM incoming

feng · « **Reply #85 on:** Wed, 12 September 2012, 12:27:59 »

I'll stick with the board w/ doubleshot keycaps.

IvanIvanovich · « **Reply #86 on:** Wed, 12 September 2012, 12:35:28 »

Super, thanks guys.

Zwi · « **Reply #87 on:** Wed, 12 September 2012, 17:47:39 »

Sad to hear there was a problem. I'm not too sure what the options are, I would still love a board with double shots (even if it has different switches) but I don't know if thats still an option. I don't want to get a refund and leave you with the short end of the stick

IvanIvanovich · « **Reply #88 on:** Wed, 12 September 2012, 21:02:43 »

Yes, you can still have the doubleshots board you paid for of course.

danielucf · « **Reply #89 on:** Wed, 12 September 2012, 21:39:08 »

How much would you want for a set of the PBTs if they are available from a refunded board? I might be interested if it helps reduce the hit.

Zwi · « **Reply #90 on:** Wed, 12 September 2012, 22:09:01 »

Quote from: lysol on Wed, 12 September 2012, 21:02:43

Yes, you can still have the doubleshots board you paid for of course.

Ok cool I just got confused following the thread and was under the impression there were not enough boards/keycaps to go around

IvanIvanovich · « **Reply #91 on:** Thu, 13 September 2012, 11:48:25 »

Yes Dante $50 shipped USA for 8113LUAUS-0, 3 left.
I also have 3 8113HUBUS-2 left for $70 + shipping, and if you have read through the thread I hope you understand the price increase.

IvanIvanovich · « **Reply #92 on:** Thu, 13 September 2012, 21:24:54 »

Sorry I was not able to get pictures done or the stuff mailed out today. I will do my best to get it all done tomorrow.
Currently available:
3x G80-8113HUBUS-2
2x G80-8113LUAUS-0
1x G80-8113LUAUS-X white pbt keycaps, black case body (repaired by me)
1x G80-8113LUAUS-X black pom keycaps, white case body (repaired by me)
1x G80-8113XUBXX-X no keycaps, black case body

winzds · « **Reply #93 on:** Thu, 13 September 2012, 21:43:14 »

in for one, i need international shipping.

IvanIvanovich · « **Reply #94 on:** Thu, 13 September 2012, 21:49:08 »

For international add $15 for whole board, also willing to do just keycaps and switches if the shipping is too steep.

nntnam · « **Reply #95 on:** Thu, 13 September 2012, 21:58:51 »

I only want the caps from this board

Quote

2x G80-8113LUAUS-0

Anyone want to part with?

IvanIvanovich · « **Reply #96 on:** Thu, 13 September 2012, 22:23:57 »

I Want to try and sell the complete boards if at all possible first. I do have 2x spare POM sets with ISO enter from the broken ones left though.

IvanIvanovich · « **Reply #97 on:** Fri, 14 September 2012, 15:55:04 »

All shipped! Here are some pics that are representative of what you are getting, and what is left:
Doubleshots:

Lasered PBT:

Lasered POM:

Lasered PBT with black case:

The_Beast · « **Reply #98 on:** Fri, 14 September 2012, 15:58:00 »

Dumb question incoming...

The double shot should fit a flico/wasd/rosewill.... without the moogle right? All I would need is the arrow keys and the page up, page down..... keys? If so, how much do you want shipped? Would you sell just the keys?

IvanIvanovich · « **Reply #99 on:** Fri, 14 September 2012, 16:01:31 »

You are absolutely correct about compatibility. Priority will be given to anyone that wants to buy entire boards. After that I will sell keycap sets if they haven't moved.

The_Beast · « **Reply #100 on:** Fri, 14 September 2012, 16:02:18 »

How much for the whole board (shipped) and what switch type?

edit: Any shine on the keys?

IvanIvanovich · « **Reply #101 on:** Fri, 14 September 2012, 16:15:56 »

Browns, boards are all just like the ones in photos condition wise. Prices are in first post.

The_Beast · « **Reply #102 on:** Fri, 14 September 2012, 16:23:13 »

Do you have any double shot arrow/page up/page down keys that you would be willing to sell with this? They look pretty much brand new, is that the case (imma noob when it comes to ds cherry keys)?

IvanIvanovich · « **Reply #103 on:** Fri, 14 September 2012, 16:40:27 »

Yes they are near mint, almost like right out of the box. The only spare white on black doubleshots nav keys I have are from 1800, so they really aren't much better, have wrong row profile.

The_Beast · « **Reply #104 on:** Fri, 14 September 2012, 16:43:50 »

Sweet, pm me your PP email and I'll send payment. IDK why because I already have to many key cap sets but for $50-$55 (after selling switches) is not bad for a near mint cherry DS set

edit: it is the G80-8113HUBUS-2 right?

danielucf · « **Reply #105 on:** Tue, 18 September 2012, 13:21:58 »

Anyone else not having the photobucket image links working?

IvanIvanovich · « **Reply #106 on:** Tue, 18 September 2012, 13:45:36 »

Seems there has been some issues with photobucket lately. I was delayed a few days of not even being able to upload stuff last week.

dorkvader · « **Reply #107 on:** Tue, 18 September 2012, 13:58:33 »

Lysol, those pictures are HAWT. I'm going to be very happy with my incoming keyboard, I'm sure. Those white/black ones are especially nice.

I think I'll stagger PBT/POM on mine, or do halves or something. The possabilities are endless!

hashbaz · « **Reply #108 on:** Tue, 18 September 2012, 14:21:40 »

Received my 2-shot set yesterday. Thanks lysol!

IvanIvanovich · « **Reply #109 on:** Tue, 18 September 2012, 14:49:43 »

Thanks, black and white 2tone looks total class too...
I am pretty sure I have all the shipping overages etc I still owed some of you done. If not, or I made an error in the amount don't hesitate to let me know.

danielucf · « **Reply #110 on:** Tue, 18 September 2012, 15:26:50 »

Got mine and they are pretty much brand new. The F and J do not have anything on them to help you find the home row, is this normal for Cherry double shots? Thinking about putting a small dab of finger nail polish or something on there. Now that I think about it I've seen F and J Cherry double shots with a hold drilled up from underneath, this would explain that.

jwaz · « **Reply #111 on:** Tue, 18 September 2012, 15:30:07 »

They aren't scooped??

sth · « **Reply #112 on:** Tue, 18 September 2012, 15:31:40 »

dan nooooooo don't ruin your keys just get used to the scoops! you'll come to prefer them i bet... just dont put anything on them or drill holes in them

hashbaz · « **Reply #113 on:** Tue, 18 September 2012, 15:34:10 »

You'll get used to the scoops man. Soon you'll wish all your home rows were scooped.

IvanIvanovich · « **Reply #114 on:** Tue, 18 September 2012, 15:54:46 »

They are scooped pretty sure. If you need nubs there are some stick on ones that don't ruin the keycap. Get those.
I do have some that are not scooped, but I don't think any of the boards I sent out were flat FJ. I also have a black on white set that have FJ center dot nubs like the numpad 5.

hashbaz · « **Reply #115 on:** Tue, 18 September 2012, 16:00:12 »

lysol, you should collect all your unique and rare Cherry caps into one photo.

el2k · « **Reply #116 on:** Tue, 18 September 2012, 16:07:29 »

Scoooopz are too sick.

danielucf · « **Reply #117 on:** Tue, 18 September 2012, 16:24:15 »

hot damn they are scooped. Cherry keys just blew my mind, Going to put them onto my FC700R right now.

IvanIvanovich · « **Reply #118 on:** Tue, 18 September 2012, 16:37:32 »

I have most of it in my trade thread actually...

Quote from: hashbaz on Tue, 18 September 2012, 16:00:12

lysol, you should collect all your unique and rare Cherry caps into one photo.

I have some of it in my trade thread actually... but not all in one photo. If I put everything all in one photo it would be zoomed out so far you couldn't see what it was!

danielucf · « **Reply #119 on:** Tue, 18 September 2012, 17:22:57 »

I love it so far. I know the arrow keys and such on the right are not all the correct profile but it doesn't look too bad and I can acquire non relengdable*spelling down the road. I am now a huge fan of cherry double shots. Scoops FTW.

DanGWanG · « **Reply #120 on:** Tue, 18 September 2012, 17:49:28 »

These lasered PBTs are pretty freaking sweet...

oneproduct · « **Reply #121 on:** Tue, 18 September 2012, 20:10:42 »

I'd be curious how much it is to get just a set of black doubleshots off the keyboards shipped to Canada if there's any still available.

IvanIvanovich · « **Reply #122 on:** Tue, 18 September 2012, 21:35:59 »

Sorry all the doubleshot version are gone, only have lasered version left.

dorkvader · « **Reply #123 on:** Tue, 25 September 2012, 21:38:24 »

Mine came in.

Pro's:
Works
Looks almost unused
USB
PBT
Screwless construction

Con's
THIN PBT
3 clips holding it together in the front broke

Shipping damage:
Box looked like it'd been sat on.
2 keycaps fell off. No big deal.
The numpad enter key stabilizer came off, but it wasn't broken or anything, so I got a good look at it and reseated it.
---
I put on some thick Lasered POM to replace the thin PBT. It looks good with a black/white theme.
I replaced:
A-Z
` and 1-9 and -=
esc and F1-F12
Arrowkeys
The 0 . and 1-9 on the tenkey.

I might do the spacebar, too.

The_Beast · « **Reply #124 on:** Tue, 25 September 2012, 21:57:22 »

I got mine yesterday. Despite just buying the board for the caps, I kinda like the board. I might keep it and mod it to fit a Raspberry Pi since there seems to be a lot of room in the case to fit one.

blighty · « **Reply #125 on:** Tue, 25 September 2012, 22:07:24 »

Got my DS board yesterday. Thanks! Already temporarily swapped lasered keys on it, will eventually ninja/blank relegend it. Don't like its poor nkro, but dig that most of the board can be set for macros with the downloadable cherry software. May or may not swap in black switches (going to give brown a chance).

IvanIvanovich · « **Reply #126 on:** Tue, 25 September 2012, 22:10:34 »

Sorry to hear the USPS abused and delayed the package dorkvader. I hope it wasn't because my packaging was insufficient.

dorkvader · « **Reply #127 on:** Wed, 26 September 2012, 00:08:52 »

Quote from: lysol on Tue, 25 September 2012, 22:10:34

Sorry to hear the USPS abused and delayed the package dorkvader. I hope it wasn't because my packaging was insufficient.

No sir! Your packing looked just fine for a keyboard. I'm very happy with this, and am using it now. USPS probably used it for volleyball or something. It's a testament to cherry's durability that it survived so well. You should have seen the box.

Hzza · « **Reply #128 on:** Wed, 26 September 2012, 03:38:52 »

Can I get just caps from the black pom board? I'm in the UK btw.

vbrenny · « **Reply #129 on:** Mon, 22 October 2012, 10:39:08 »

Do you ship to Brazil?
Can you please calculate the costs?

Thanks.

IvanIvanovich · « **Reply #130 on:** Mon, 22 October 2012, 10:48:29 »

Yes I can ship to Brazil. Total would be $75 with first class USPS shipping, add $12 if you need tracking.

vbrenny · « **Reply #131 on:** Mon, 22 October 2012, 11:37:10 »

Just found on the thread they have clears and not browns.
I'm looking for browns, so sorry about that.

I promise to read the entire thread before jumping into the contact from now on.

IvanIvanovich · « **Reply #132 on:** Mon, 22 October 2012, 12:03:23 »

No they have browns. Perhaps I should have include that info in the first post. Not having clears is why I still have some left, as many that originally wanted one of these were only buying based on clears.

vbrenny · « **Reply #133 on:** Mon, 22 October 2012, 12:50:17 »

Perfect!

I want white body and black keys.
Can you reserve one until this Friday? This way my Credit Card will only bill me on December

Thanks.

IvanIvanovich · « **Reply #134 on:** Mon, 22 October 2012, 13:29:02 »

Shouldn't be a problem. PM me when you ready to pay.

IvanIvanovich · « **Reply #135 on:** Sat, 27 October 2012, 13:38:59 »

Yay! Finally getting rid of these, only 1 left.

MissMurd3r84 · « **Reply #136 on:** Tue, 30 October 2012, 04:14:05 »

Lemme know if you end up just wanting to sell the keys if no one else ends up nabbing it complete

esoomenona · « **Reply #137 on:** Tue, 30 October 2012, 13:39:49 »

How does that trackpad work? Is it essentially the same as on a laptop?

The_Beast · « **Reply #138 on:** Tue, 30 October 2012, 13:43:07 »

The trackpad does work without drivers. The card read does need the cherry tools driver/program to "work" mine just beeped at me and I got some random numbers. I'm sure someone smarter tham me can make the card reader functional

IvanIvanovich · « **Reply #139 on:** Tue, 30 October 2012, 14:00:07 »

Yes trackpad works just like laptop, it shows up as generic poining device and require no additional driver. It has 800 or 1200dpi depend on which revision of the synaptics pad is installed. Card reader only works in application that are card reader aware, you can test it in Cherry tools but it's not needed for it to function I don't think. Also you can program all the extra keys to macros or anything else in Cherry tools.

esoomenona · « **Reply #140 on:** Tue, 30 October 2012, 14:00:20 »

It would be neat to have the card reader work as a security key reader to unlock your computer.

IvanIvanovich · « **Reply #141 on:** Tue, 30 October 2012, 15:00:47 »

Could be possible if you know how to set that up? There is a similar model that has smartcard reader just for that type of thing actually.

News:

Author Topic: G80-8113HUBUS-2/LUAUS-0 ANSI {all gone} (Read 28516 times)