Author Topic: [GB] Universal TKL plate (Filco/phantom/CM quickfire compatible) (Read 123044 times)

Dreamre · « **Reply #200 on:** Sat, 15 June 2013, 10:20:35 »

Looking forward to this GB

!

I just noticed my name was on the list LOL!

Photoelectric · « **Reply #201 on:** Sat, 15 June 2013, 10:26:28 »

I'd like to up my interest to 2 plates, pending on the final price! (At least one for sure, thank you for having my name on the list!)

WhiteFireDragon · « **Reply #202 on:** Mon, 17 June 2013, 16:16:11 »

I've paid for this small batch already, so I only have a set amount. I don't have time to do a full GB for these. I've just sent out PMs to everyone that wanted one so far. Probably won't be accepting anymore "preorders" since I want to reserve some to sell later.

Quote from: danielucf on Thu, 13 June 2013, 15:23:58

Is it the plates or the shipping that will be more expensive? I was under the impression that steel was cheaper since the Phantom plates were I think $20 a piece.

Both. Recently there were huge increases in shipping for domestic and about double for international, effective sometimes in January this year. The first round I did was last year.

Stainless steel is roughly 3x more expensive than aluminum. But the bulk of the price is from the laser cutting process, not the material. The reason why phantom plates were only ~$25, is because those were at the 140 price tier. There's no way I'm going to front that much money for this round2 TKL plates, so I only ordered a small batch. Also that $25 phantom plate did not include shipping yet.

Dreamre · « **Reply #203 on:** Mon, 17 June 2013, 17:32:59 »

Paid!

Thanks WFD!

eyesmiles · « **Reply #204 on:** Mon, 17 June 2013, 19:06:16 »

Payment sent

Thank you WFD!

bazemk1979 · « **Reply #205 on:** Mon, 17 June 2013, 19:42:52 »

WFD form filled waiting on invoice from you.

lightsout714 · « **Reply #206 on:** Mon, 17 June 2013, 19:44:23 »

Quote from: bazemk1979 on Mon, 17 June 2013, 19:42:52

WFD form filled waiting on invoice from you.

I think there are addresses on the form for paypal and amazon payments.

WFD shot you a pm.

Photoelectric · « **Reply #207 on:** Mon, 17 June 2013, 19:47:38 »

Paid for 2

Thank you!!!

bazemk1979 · « **Reply #208 on:** Mon, 17 June 2013, 21:52:28 »

Paid via paypal gift, 1 QFR plate, also included shipping info and GH nick on paypal payment.

oluf · « **Reply #209 on:** Mon, 17 June 2013, 23:54:50 »

Quote from: WhiteFireDragon on Mon, 17 June 2013, 16:16:11

I've paid for this small batch already, so I only have a set amount. I don't have time to do a full GB for these. I've just sent out PMs to everyone that wanted one so far. Probably won't be accepting anymore "preorders" since I want to reserve some to sell later.

Schucks.. I just saw this. If you're willing to add another 2 (or 1) to the list, please add me. If not, I'll try to get some of those you sell later. TIA.

blueSmoke · « **Reply #210 on:** Tue, 18 June 2013, 02:55:45 »

WFD,
I dont know how I missed on this one!! If you are taking preorders, I would like to be added to the list. If not, please add me to your 'selling later' list. I am desperately in need of replacing few keys from my filco and this will help.

Didn't think of overloading your PM inbox, so posting here.

thanks.

redskull · « **Reply #211 on:** Thu, 20 June 2013, 11:58:50 »

hi WFD,

am late to the party, but if any of the plate is up for sale, do inform me. i want to get one. thanks.

noobandroid · « **Reply #212 on:** Sat, 22 June 2013, 10:48:33 »

paid fast fast

Photoelectric · « **Reply #213 on:** Sat, 22 June 2013, 11:02:41 »

Is there an approximate shipping date for these plates?

ETA: just noticed "early July" on the previous page

. Hopefully soon then!

JaccoW · « **Reply #214 on:** Tue, 25 June 2013, 01:02:45 »

Like some of the other here, I am interested in one but late to the party. Let me know if there are any leftovers.

Bohemica · « **Reply #215 on:** Tue, 25 June 2013, 01:46:31 »

I'm also interested in obtaining one of these plates.

LechnerDE · « **Reply #216 on:** Tue, 25 June 2013, 02:12:48 »

I'd be interested in one of these plates as well.

Ideally I'd like it to be shipped with my GH60 order to save additional shipping costs to Germany

blueSmoke · « **Reply #217 on:** Mon, 01 July 2013, 00:39:24 »

Paid for one.

LechnerDE · « **Reply #218 on:** Mon, 01 July 2013, 00:42:29 »

What? So they are still available?

Did you just PM WFD?

Poom · « **Reply #219 on:** Mon, 01 July 2013, 06:18:30 »

im also interested in buying. if you still have them.

noobandroid · « **Reply #220 on:** Mon, 01 July 2013, 22:34:27 »

been a while since any response

WhiteFireDragon · « **Reply #221 on:** Tue, 02 July 2013, 14:22:00 »

I'm still around, but been pretty busy with moving to my new place. I've already sent out PMs to the prior list of preorders. Plates will finish soon and I'll go pick them when I can free up some time. Not sure what other updates I need to give.

Photoelectric · « **Reply #222 on:** Tue, 02 July 2013, 14:38:37 »

*Cheerleading pom-pom squad here*
Go plates Go!

(Thank you for the hard work! And good luck with the move!)

bazemk1979 · « **Reply #223 on:** Tue, 02 July 2013, 14:44:44 »

Quote from: WhiteFireDragon on Tue, 02 July 2013, 14:22:00

I'm still around, but been pretty busy with moving to my new place. I've already sent out PMs to the prior list of preorders. Plates will finish soon and I'll go pick them when I can free up some time. Not sure what other updates I need to give.

lol sensing someone is getting pissed hahaha, and cant blame him

oluf · « **Reply #224 on:** Tue, 02 July 2013, 14:44:58 »

Kudos on the new place WFD!

Thank you for the update! =)

xavierblak · « **Reply #225 on:** Tue, 02 July 2013, 15:33:20 »

I sent you a PM but it may have been lost in the shuffle. Before I ordered I wanted to find out if selecting a different board is gonig to effect the plate I get. I thought the plate was universal so I was confused when I saw the option to select the keyboard it was for.

gnubag · « **Reply #226 on:** Tue, 02 July 2013, 15:36:55 »

delete plz

noobandroid · « **Reply #227 on:** Wed, 03 July 2013, 04:11:42 »

Quote from: WhiteFireDragon on Tue, 02 July 2013, 14:22:00

I'm still around, but been pretty busy with moving to my new place. I've already sent out PMs to the prior list of preorders. Plates will finish soon and I'll go pick them when I can free up some time. Not sure what other updates I need to give.

i paid mine so expecting one NO MATTER WHAT

gnubag · « **Reply #228 on:** Thu, 04 July 2013, 21:22:26 »

Is there an ETA on the plates?
I still have to get a new desoldering pump before it arrives

bazemk1979 · « **Reply #229 on:** Fri, 05 July 2013, 07:05:08 »

mid july he should have them

BliTzKiN · « **Reply #230 on:** Fri, 05 July 2013, 22:50:19 »

I'm also interested in obtaining 2 if you still have leftovers or intending to do another round. Cheers!

Smeagol_RP · « **Reply #231 on:** Fri, 05 July 2013, 23:13:42 »

If is there leftovers, I want two plates.

WhiteFireDragon · « **Reply #232 on:** Wed, 10 July 2013, 17:37:23 »

Just a quick update, I picked up the plates a few days ago, I'll package most tonight and have it shipped tomorrow. I'm not processing leftovers right now. That will have to come later when I have more time.

Quote from: bazemk1979 on Tue, 02 July 2013, 14:44:44

lol sensing someone is getting pissed hahaha, and cant blame him

Huh? Why would I be mad?

Photoelectric · « **Reply #233 on:** Wed, 10 July 2013, 17:40:06 »

Quote from: WhiteFireDragon on Wed, 10 July 2013, 17:37:23

Just a quick update, I picked up the plates a few days ago, I'll package most tonight and have it shipped tomorrow. I'm not processing leftovers right now. That will have to come later when I have more time.

<3!!

VesperSAINT · « **Reply #234 on:** Wed, 10 July 2013, 17:41:28 »

Quote from: WhiteFireDragon on Wed, 10 July 2013, 17:37:23

Just a quick update, I picked up the plates a few days ago, I'll package most tonight and have it shipped tomorrow. I'm not processing leftovers right now. That will have to come later when I have more time.

Quote from: bazemk1979 on Tue, 02 July 2013, 14:44:44
lol sensing someone is getting pissed hahaha, and cant blame him

Huh? Why would I be mad?

Perfect timing! Yaaay~ Looks like I'll be able to install my vintage blacks into my QFR sooner than I thought. Thanks, dood.

LechnerDE · « **Reply #235 on:** Thu, 11 July 2013, 02:26:55 »

Quote from: WhiteFireDragon on Wed, 10 July 2013, 17:37:23

I'm not processing leftovers right now. That will have to come later when I have more time.

Ok, as stated some posts above I am interested in leftovers.

Do you have a list of people interested or will I have to spam f5 in this thread until you offer them?

WhiteFireDragon · « **Reply #236 on:** Thu, 11 July 2013, 02:57:20 »

Here is the round 2 batch that I'm currently packaging to ship out for the preorders. The cut quality is even better than the Korean stainless steel plate from a different keyboard that I just got.

Quote from: LechnerDE on Thu, 11 July 2013, 02:26:55

Do you have a list of people interested or will I have to spam f5 in this thread until you offer them?

I'll keep you in mind after I take of these first shipments.

LechnerDE · « **Reply #237 on:** Thu, 11 July 2013, 03:54:01 »

Quote from: WhiteFireDragon on Thu, 11 July 2013, 02:57:20

I'll keep you in mind after I take of these first shipments.

Thank you very much

EDIT: I also ordered plates for the GH60 GB. Would it be possible to add this universal TKL plate to that order to save shipping costs?

Poom · « **Reply #238 on:** Thu, 11 July 2013, 03:57:32 »

Please also keep me in mind, im also interested if there are any leftovers!!

Batmann · « **Reply #239 on:** Thu, 11 July 2013, 04:15:07 »

If you have a spare ANSI 125 I would be interested as I am not sure when I'll get mine from bavman if ever I get it

whiskytango · « **Reply #240 on:** Thu, 11 July 2013, 11:06:25 »

well, since everyone else is doing it...

I'd really like to pick one of these up as well. I PMed a while back but I think I just missed the cut-off for preorders

badcop · « **Reply #241 on:** Thu, 11 July 2013, 11:31:45 »

i'd be interested in 1 or 2 after the pre orders get sorted out.

korrelate · « **Reply #242 on:** Thu, 11 July 2013, 12:31:45 »

I know I'm ridiculously late, and I know that you're hammered with requests, WFD, but I would also like to express an interest in any left overs. If you have any available, could you please consider me also? I know it's a complete long shot, but thanks for reading this anyway.

Cheers,

K

Defying · « **Reply #243 on:** Thu, 11 July 2013, 17:30:41 »

I'm late, but I'm interested in any leftovers you may have.

Photoelectric · « **Reply #244 on:** Thu, 11 July 2013, 18:13:53 »

I'm ready

Photoelectric · « **Reply #245 on:** Mon, 15 July 2013, 11:04:56 »

Arrived today! Very nice plates.

VesperSAINT · « **Reply #246 on:** Mon, 15 July 2013, 12:54:17 »

Just got mine in... I'm kind of heated right now.... How the hell do they do this to a stainless steel plate? It's not like WFD could've reinforced it with anything stronger LOL... I mean... ugh... is there anything I can do to straighten this thing out perfectly? Goddamn USPS... The packaging had "Do not bend," on it (Thanks WFD

), and it's almost like they had trolls sitting in the post office that just damages packages for the heck of it...

I do not blame WFD in any way or form

Awesome plates by awesome dood.

Any kind of solutions would be nice

Other than that, the plate is pretty!

See package in mail get all happy and excited but then I pull it out and I can already tell...

I pray it's just the packaging... I open it and fu-

I think, "maybe it's not too bad..."

lol

Photekq · « **Reply #247 on:** Mon, 15 July 2013, 12:56:10 »

Sometimes I actually think postal services try and **** up packages..

To straighten it you'll need to bend it the opposite way.. you can't just flatten it as it'll never be fully flat that way.

badcop · « **Reply #248 on:** Mon, 15 July 2013, 12:56:45 »

use that granite counter top to straighten it out. just bend it until it looks good. every plate i've bought has come like that unfortunately.

VesperSAINT · « **Reply #249 on:** Mon, 15 July 2013, 12:58:24 »

Quote from: Photekq on Mon, 15 July 2013, 12:56:10

Sometimes I actually think postal services try and **** up packages..

To straighten it you'll need to bend it the opposite way.. you can't just flatten it as it'll never be fully flat that way.

Yeah... I assumed just bending it would be the obvious way to do it but now I'm scared that while I'm bending it, it's going to give way I'm going to create like this huge fold into it....... this is pretty retarded.

Thanks for the tips though....

Quote from: badcop on Mon, 15 July 2013, 12:56:45

use that granite counter top to straighten it out. just bend it until it looks good. every plate i've bought has come like that unfortunately.

I feel your pain

I shall give it a try after lunch. Thanks for the empathy

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: [GB] Universal TKL plate (Filco/phantom/CM quickfire compatible) (Read 123044 times)