Author Topic: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping  (Read 58183 times)

0 Members and 1 Guest are viewing this topic.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #150 on: Sun, 16 September 2018, 13:07:42 »
Any photo of the chiwi full brass?
It is during polish.
We don't satisfied with the surface treatment last time O_Q

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #151 on: Sun, 16 September 2018, 13:10:11 »
Are there any extras or is anyone looking to sell their kit?
We have some extra left for anodize aluminum version.
https://shopkey.doyustudio.com/001kit00bs

White is damaged during shipping as we mentioned.
It should finish ED processing this week.
And we'll put them on our site after we send all orders.

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #152 on: Mon, 17 September 2018, 15:12:15 »
Are there any extras or is anyone looking to sell their kit?
Extras are up for sale on the doyu studio website. There doesn't seem to be any of the white variants though.

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #153 on: Mon, 17 September 2018, 15:20:53 »
Are there any extras or is anyone looking to sell their kit?
Extras are up for sale on the doyu studio website. There doesn't seem to be any of the white variants though.

read the post above please.

Offline archosis

  • Posts: 2
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #154 on: Tue, 18 September 2018, 11:30:43 »
Should I have received a shipping notification by now? I actually don't remember what color I ordered (pretty sure it wasn't white)
« Last Edit: Tue, 18 September 2018, 12:35:57 by archosis »

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #155 on: Tue, 18 September 2018, 13:49:19 »
Should I have received a shipping notification by now? I actually don't remember what color I ordered (pretty sure it wasn't white)
I think there wasn't an email notification but if you login to the website and click on the order, there should be shipping details there.

Offline archosis

  • Posts: 2
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #156 on: Tue, 18 September 2018, 21:23:18 »
Should I have received a shipping notification by now? I actually don't remember what color I ordered (pretty sure it wasn't white)
I think there wasn't an email notification but if you login to the website and click on the order, there should be shipping details there.

Thanks, I don't think I made an account (guest checkout?) and resetting password didn't work.  I've contacted sennin directly instead.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #157 on: Tue, 02 October 2018, 04:40:29 »
Hi,
everybody.
sorry for loooooong wait.
we've start to send white cases.
around half of white orders will dispatch before this Friday :)
will ship all orders with in next 2 weeks.

bad news is there's not lot white case left.
so might not have extra white case for sell :(

Offline Darknight00z

  • Posts: 644
  • Location: UK
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #158 on: Tue, 02 October 2018, 14:34:17 »
Are the white pcbs ready?

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #159 on: Mon, 08 October 2018, 00:24:30 »
Hi, we uploaded the plate cad file w/ ANSI layout sample!
https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg
You can create your own with autocad :)
We also have 3d file for creo, but since this is a flat item, autocad works fine.
Normally I modify it in autocad, it is smoother(creo got laggy when dealing with too many objects).
« Last Edit: Mon, 08 October 2018, 00:30:02 by sennin32 »

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #160 on: Mon, 08 October 2018, 00:30:43 »
Are the white pcbs ready?
Sorry, not yet.
China had National Day vacation last week O_Q

Offline w0odyallen

  • Posts: 15
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #161 on: Sun, 14 October 2018, 18:47:40 »
just got my white case.
i didnt realize its not a universal plate. can i buy a pcb anywhere?

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #162 on: Sun, 14 October 2018, 19:02:09 »
just got my white case.
i didnt realize its not a universal plate. can i buy a pcb anywhere?
I'm guessing that you got the default plate layout which is really unique.
You can buy DO60 PCBs from the doyu studio website. Alternatively, you could ask Sennin if he has any spare universal plates. Wixxzblu has also made a CAD model of a single layout plate for either standard and tsangan bottom row so you can get your own plate cut as well.

Offline w0odyallen

  • Posts: 15
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #163 on: Sun, 14 October 2018, 19:04:34 »
just got my white case.
i didnt realize its not a universal plate. can i buy a pcb anywhere?
I'm guessing that you got the default plate layout which is really unique.
You can buy DO60 PCBs from the doyu studio website. Alternatively, you could ask Sennin if he has any spare universal plates. Wixxzblu has also made a CAD model of a single layout plate for either standard and tsangan bottom row so you can get your own plate cut as well.

cool. site is down for me now but i'll check it later. and yea i got the plate with the split space.

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #164 on: Sun, 14 October 2018, 23:33:22 »
just got my white case.
i didnt realize its not a universal plate. can i buy a pcb anywhere?
I'm guessing that you got the default plate layout which is really unique.
You can buy DO60 PCBs from the doyu studio website. Alternatively, you could ask Sennin if he has any spare universal plates. Wixxzblu has also made a CAD model of a single layout plate for either standard and tsangan bottom row so you can get your own plate cut as well.

cool. site is down for me now but i'll check it later. and yea i got the plate with the split space.
Yup. The website was down over the weekend but it's up now.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #165 on: Tue, 16 October 2018, 13:18:14 »
I guess you sent me a mail!?
replied :)

Offline w0odyallen

  • Posts: 15
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #166 on: Tue, 16 October 2018, 13:19:16 »
I guess you sent me a mail!?
replied :)

Yes. I ordered a PCB so all is well.

Offline dimo

  • Posts: 615
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #167 on: Tue, 16 October 2018, 15:49:12 »
I have a purple chiwi60 HHKB kit if anyone’s interested ! (unbuilt)

Offline wixxzblu

  • Posts: 210
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #168 on: Thu, 18 October 2018, 03:30:20 »
just got my white case.
i didnt realize its not a universal plate. can i buy a pcb anywhere?
I'm guessing that you got the default plate layout which is really unique.
You can buy DO60 PCBs from the doyu studio website. Alternatively, you could ask Sennin if he has any spare universal plates. Wixxzblu has also made a CAD model of a single layout plate for either standard and tsangan bottom row so you can get your own plate cut as well.

Yes, here is the plate file for a more a fixed layout if anybody wants to cut their own. If there is interest in a 5mm acrylic plate file, i may do that as well, show your interest if so.

https://drive.google.com/file/d/1ivN_TSg4HKySG5CQ4hgAzhUwdCiaeaIL/view?usp=sharing




Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1631
  • Location: 白い帽子
  • greyhat co-leader
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #169 on: Thu, 18 October 2018, 19:41:41 »
I have a purple chiwi60 HHKB kit if anyone’s interested ! (unbuilt)

Is it actual HHKB or 7u?


Keyboards: HHKB Pro 1 & OTD 356CL Dark Greyhat Edition, baybee!

Offline dimo

  • Posts: 615
[GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #170 on: Fri, 19 October 2018, 18:57:52 »
I have a purple chiwi60 HHKB kit if anyone’s interested ! (unbuilt)

Is it actual HHKB or 7u?

The rightmost blocker is larger, so actual HHKB I believe. PM me further if you’re interested ((:

Offline heavyheaded

  • Posts: 70
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #171 on: Wed, 24 October 2018, 10:32:13 »
Got 2 of these and 2 PCBs but one of the PCBs isn't functional (bad USB port). Doyu studio has been unresponsive to my emails for a full week. Caveat emptor.

Offline duynguyenle

  • Posts: 1388
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #172 on: Mon, 29 October 2018, 20:52:04 »
Got mine today. Quality seems good on the top case other than some imperfections on the coating. Probably not worth the hassle to try and fix. Nice thick bottom plate and shiny weight piece with doyu logo. Have not had time to test the PCB yet, been quite busy, but looks like nothing is missing.
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline heavyheaded

  • Posts: 70
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #173 on: Thu, 01 November 2018, 10:28:52 »
Got 2 of these and 2 PCBs but one of the PCBs isn't functional (bad USB port). Doyu studio has been unresponsive to my emails for a full week. Caveat emptor.

Update: Doyu studio eventually started responding to me. They are shipping a replacement PCB.

Also I've been using the working PCB with a HHKB-style Chiwi60 and it has been very nice.

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #174 on: Wed, 07 November 2018, 10:33:22 »
Hi, guys.
We just update white chiwi extra kit with HHKB layout.
You might want to check them here : https://shopkey.doyustudio.com/001kit00bs
Also, we have some anodized extra kit available in the link :)

Offline iliketimex

  • Posts: 113
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #175 on: Wed, 07 November 2018, 12:31:20 »
Mine arrived (east coast US) and the anodizing quality and color is very good. Everything looks to me, thanks sennin, this GB took a while but I'm happy with the result.

Offline AlcoholEnthusiast

  • Posts: 456
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #176 on: Thu, 08 November 2018, 22:28:26 »
Anyone have pictures of this built? I'd love some good pictures of it fully built out before I consider buying one.

Offline xoxox1029

  • Posts: 92
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #177 on: Mon, 12 November 2018, 21:40:26 »
adorable kit there...  :thumb:

Offline jimirolln

  • Posts: 282
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #178 on: Wed, 28 November 2018, 11:55:07 »
...

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #179 on: Wed, 28 November 2018, 13:53:32 »
Anyone have pictures of this built? I'd love some good pictures of it fully built out before I consider buying one.
I posted mine on reddit the other day: https://imgur.com/a/uhwFtFV

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #180 on: Wed, 28 November 2018, 15:36:03 »
...
Are you still waiting for your order?

Offline Visionaire

  • Posts: 613
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #181 on: Wed, 28 November 2018, 19:55:16 »
Anyone have pictures of this built? I'd love some good pictures of it fully built out before I consider buying one.
I posted mine on reddit the other day: https://imgur.com/a/uhwFtFV

Looking good!

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #182 on: Sun, 02 December 2018, 19:43:42 »
...
Are you still waiting for your order?
We should already sent all orders@@

Offline lac29

  • Posts: 154
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #183 on: Sun, 02 December 2018, 20:16:22 »
My PCB seems to be broken (keys not registering after bridging with tweezer and manually trying via switch press ... did check before soldering and only the lights underneath are on). I can send proof but is there a way to get a replacement?

Offline japanesehorrorwriter

  • Posts: 127
  • Location: Los Angeles, Ca
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #184 on: Sun, 16 December 2018, 22:35:00 »
I was sent this plate.

Is this what everyone else got?

https://imgur.com/a/BtEzSkj

Was I sent the right one? Does it really not have 6.25 support? and I have to do 6u? and its forced split backspace?

I got the brass version and the OP is simply not responding. Sent him three messages over several weeks. Zero response. Getting irritated by this stuff.

EDIT: OP has responded. I am eating crow. I ordered the wrong plate. Will get a plate cut using Wixxblue's file. Let me know if anyone wants one.
s
« Last Edit: Wed, 26 December 2018, 21:11:14 by japanesehorrorwriter »

Offline dimo

  • Posts: 615
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #185 on: Sun, 16 December 2018, 22:36:02 »
I was sent this plate.

Is this what everyone else got?

https://imgur.com/a/BtEzSkj

Was I sent the right one? Does it really not have 6.25 support? and I have to do 6u? and its forced split backspace?

I got the brass version and the OP is simply not responding. Sent him three messages over several weeks. Zero response. Getting irritated by this stuff.

yea, people have been dremeling

Offline japanesehorrorwriter

  • Posts: 127
  • Location: Los Angeles, Ca
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #186 on: Sun, 16 December 2018, 22:37:12 »
I was sent this plate.

Is this what everyone else got?

https://imgur.com/a/BtEzSkj

Was I sent the right one? Does it really not have 6.25 support? and I have to do 6u? and its forced split backspace?

I got the brass version and the OP is simply not responding. Sent him three messages over several weeks. Zero response. Getting irritated by this stuff.

yea, people have been dremeling

Are you serious?

Jesus.

Offline dimo

  • Posts: 615
[GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #187 on: Sun, 16 December 2018, 22:37:29 »
I was sent this plate.

Is this what everyone else got?

https://imgur.com/a/BtEzSkj

Was I sent the right one? Does it really not have 6.25 support? and I have to do 6u? and its forced split backspace?

I got the brass version and the OP is simply not responding. Sent him three messages over several weeks. Zero response. Getting irritated by this stuff.

yea, people have been dremeling

Are you serious?

Jesus.

yeah mines still sitting in the box, prolly gonna try sell it if it even sells ):

Sent from my iPhone using Tapatalk

Offline japanesehorrorwriter

  • Posts: 127
  • Location: Los Angeles, Ca
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #188 on: Sun, 16 December 2018, 22:50:19 »
I was sent this plate.

Is this what everyone else got?

https://imgur.com/a/BtEzSkj

Was I sent the right one? Does it really not have 6.25 support? and I have to do 6u? and its forced split backspace?

I got the brass version and the OP is simply not responding. Sent him three messages over several weeks. Zero response. Getting irritated by this stuff.

yea, people have been dremeling

Are you serious?

Jesus.

yeah mines still sitting in the box, prolly gonna try sell it if it even sells ):

Sent from my iPhone using Tapatalk

Far from ideal....

Anyone create a better plate file?

Or willing to dremel for $?

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #189 on: Mon, 17 December 2018, 00:12:11 »
I was sent this plate.

Is this what everyone else got?

https://imgur.com/a/BtEzSkj

Was I sent the right one? Does it really not have 6.25 support? and I have to do 6u? and its forced split backspace?

I got the brass version and the OP is simply not responding. Sent him three messages over several weeks. Zero response. Getting irritated by this stuff.

yea, people have been dremeling

Are you serious?

Jesus.

yeah mines still sitting in the box, prolly gonna try sell it if it even sells ):

Sent from my iPhone using Tapatalk

Far from ideal....

Anyone create a better plate file?

Or willing to dremel for $?

Did you receive the correct plate? There was a universal layout option. The plate you have is the default layout plate with 3u spacebars

Offline japanesehorrorwriter

  • Posts: 127
  • Location: Los Angeles, Ca
[GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #190 on: Mon, 17 December 2018, 00:30:41 »
I wasnt sent the correct plate.

Asked the OP about it but crickets....

Will need to cut my own from the file earlier on this thread unfortunately.

Not cool when people ghost.

EDIT: OP has responded. I am eating crow. I ordered the wrong plate. Will get a plate cut using Wixxblue's file. Let me know if anyone wants one.
s
« Last Edit: Wed, 26 December 2018, 21:12:00 by japanesehorrorwriter »

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #191 on: Mon, 17 December 2018, 01:44:46 »
I wasnt sent the correct plate.

Asked the OP about it but crickets....

Will need to cut my own from the file earlier on this thread unfortunately.

Not cool when people ghost.
I'll try to escalate this for you. Can you send me PM with your order number and I'll get in touch with OP

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #192 on: Thu, 10 January 2019, 13:45:00 »
I am thinking of doing a small run of clear-coated sandblasted brass bottoms for the chiwi60.
I will be removing the mount for the name plate in favour of CNCing the logo straight onto the bottom since it's already brass anyway.

Interest check form here

Offline pandemic123

  • Posts: 66
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #193 on: Mon, 14 January 2019, 03:27:13 »
anyone got the full brass version for sale?

Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #194 on: Mon, 14 January 2019, 03:44:27 »
anyone got the full brass version for sale?
There should be some brass extras for sale soon but they won't be in the polished gold colour and they definitely won't be as cheap as the GB price (it was grossly underpriced).

Offline sennin32

  • * Vendor
  • Thread Starter
  • Posts: 534
  • Location: Taiwan
    • Doyu Studio
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #195 on: Mon, 21 January 2019, 07:53:08 »
we have only split spacebar layout now 0.0

Offline mike-y

  • Posts: 75
  • Location: California, USA
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #196 on: Wed, 23 January 2019, 09:28:23 »
I have one of these in gray (case only - no pcb) that I haven't built yet.  I need to free up some space and funds for some recent medical bills, so if anyone is interested, please send me a pm.

Offline .

  • Posts: 306
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #197 on: Wed, 23 January 2019, 16:30:05 »
Hello, I have a DO60 v0.2 PCB and a Chiwi60 (bought second-hand) and got a nice custom plate for it based on the design in the OP. (https://gitlab.com/sennin32/chiwi60/blob/master/plate/output/drw_plate_ansi.dwg)
However, it seems to not fit at all. Here are some pictures:

More

More

Note: there is a switch in the Esc key position

And this is the plate file I made to compare to the original: https://cdn.discordapp.com/attachments/490585581328531506/532969696262225970/custom_chiwi60.dxf.

Offline Kuj0

  • Posts: 30
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #198 on: Sun, 27 January 2019, 20:40:44 »
What happened to the website?

The Doyu shop displays some broken page with leather tools on the header image now:

https://shopkey.doyustudio.com/



Offline gok_nz

  • Posts: 708
  • Location: NZ
  • Enjoy your PBT
    • Website
Re: [GB] Chiwi60 kit w/ brass plate [under glow][Non-floating 7 deg] - Shipping
« Reply #199 on: Wed, 30 January 2019, 18:51:56 »
What happened to the website?

The Doyu shop displays some broken page with leather tools on the header image now:

https://shopkey.doyustudio.com/
The website looks down to me as well. Apparently an engineer has been working it because it was lagging like hell.