Approved, Gl w GB!Thank you :)
Which layout should I pick in order to include arrows?HHKB has no arrow.
I have the R1 chiwi, and it surprisingly is one of my best sounding board even tho others have said it sounded hollow, just wishing i could get my hands on the 6u hhbk variant this round, but it looks like this option have been scrapped.I built a tsangan layout chiwi and I understand what you mean about the spacebar being thocky but I think you would lose it if the spacebar is shifted to the left since the switch would be close to the mounting point and make the spacebar sound less consistent.
What are the differences in the bottom upgrades?1. 7 deg bottom : For better dsound
Any pictures of the Tiffany ano? I think it may be the wrong pic on the site when you choose the option
Will this work with other USB-C 60% PCBs? Would you add a no PCB option?Both answer is no.
If I opt for the DLC bottom as an upgrade, is there a way to get the regular pc bottom as well?You can contact sennin for custom orders like that.
What are the differences in the bottom upgrades?1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.
That Stainless Steel DLC Black option looks fantastic. I'd be all over this if it wasn't a 60%.Image added
Any pictures of the 7 degree PC base vs the stock base?
Hi,What are the differences in the bottom upgrades?1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.
is brass bottom PVD/DLC option?
edit: I'd also be interested in PC bottom + upgraded option.
sweet. any way to add extra bottom? kinda want the PC & DLCHi,What are the differences in the bottom upgrades?]1. 7 deg bottom : For better dsound
2. brass bottom : for those who want full metal kbs.
is brass bottom PVD/DLC option?
edit: I'd also be interested in PC bottom + upgraded option.
there's 2 options of stainless bottom.
1 is raw with lower price, and the other one is DLC.
How can I modify my order please?
Sent from my MIX using Tapatalk
Hi
can I use holties with the DO60 pcb?
thanks
Will the 6u HHKB top support the 2x3u Split layout?
Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
Has there been any updates to the plate since R1? Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.
Can anyone with an R1 confirm if these were real issues or just minor?
QC should be good now. They produce this in Taiwan with companies nearer to Doyu Studio, so it is easier and faster for QC.
I talked to Gok some days earlier, he said the plates will be changed to eliminate the problems.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body
https://imgur.com/FaBbFy1.jpg
Sennin posted the second imgur link and it shows 2x3u is supported.
Does the Doyu split also support ISO layout?
Will the 6u HHKB top support the 2x3u Split layout?Hi,
PCB support it.
But we make 7u HHKB this time.
Since we've made 6u in R1. Give 7u a shot!
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
Is the RGB visible with the PVD/DLC bottom upgrade? Any pictures with that?Hi,
Sorry, we offer 7u this time.Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
Has there been any updates to the plate since R1? Not sure how big of an issue it was but apparently there was a bit of play when inserting the switch. Also will there be better QC on the plate finish? Most videos and photos I’ve seen have heeps of scratches.It did has scratches on the plate during R1.
Can anyone with an R1 confirm if these were real issues or just minor?
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body
https://imgur.com/FaBbFy1.jpg
Sennin posted the second imgur link and it shows 2x3u is supported.
Thanks.
Sennin, can you confirm that this layout is possible?Show Image(https://imgur.com/FaBbFy1.jpg)
Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.
Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body
https://imgur.com/FaBbFy1.jpg
Sennin posted the second imgur link and it shows 2x3u is supported.
So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body
https://imgur.com/FaBbFy1.jpg
Sennin posted the second imgur link and it shows 2x3u is supported.
Thanks.
Sennin, can you confirm that this layout is possible?Show Image(https://imgur.com/FaBbFy1.jpg)
Edit: just talked to him on Discord, it's NOT possible. Look at the position of the switch cutouts -- the blocker would interfere with the switches.Pretty sure you can do 2x3u. I found this while I was doing my pre-buy research.Will the 6u HHKB top support the 2x3u Split layout?
7u is supported. So no 6u I quess
No 6u HHKB top???
I don't need to care about this GB anymore - and 7u top HHKB are also everywhere
The 6u top is right there on the store page. I think he just means you can't use the 2x3u spacebars with the 6u top.
https://www.reddit.com/r/MechanicalKeyboards/comments/7wquzp/chiwi60_hhkb_body
https://imgur.com/FaBbFy1.jpg
Sennin posted the second imgur link and it shows 2x3u is supported.
Hi,
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.
Hi,So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.
Sent from my SM-G955F using Tapatalk
Might not be.Hi,So there is no option for 6u HHKB at all? This is an option on the buying page and I have already paid for it.
Sorry, this layout is available in R1.
We offer 7u HHKB in R2.
Quantity is not enough, we can't make 2 at the same time.
Sent from my SM-G955F using Tapatalk
Can you clarify if you will be offering 6u HHKB top for R2? Thanks!
Does the chiwi60 support usb c to usb c?Yes, it does have issue during R1 sampling.
Did the black chiwi reach the moq?Stainless?
Did the black chiwi reach the moq?Stainless?
Around 10 short @Q@
Did the black chiwi reach the moq?Stainless?
Around 10 short @Q@
Nah just the normal allu one
Did the black chiwi reach the moq?Stainless?
Around 10 short @Q@
Nah just the normal allu one
Not reach MoQ, but only few pcs short.
I'm asking if manufacturer are willing to make it.
White is okay, tiffany blue will cancel.
what's the difference between the stock bottom pc plate and the 7 one?
what's the difference between the stock bottom pc plate and the 7 one?
the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case
Deg. 7 is an upgrade, so no, but you can have an extra if you message Sennin.
what's the difference between the stock bottom pc plate and the 7 one?
the 7 degree bottom plate fills the space in the keyboard case. So you get an other sounding case
Do we get the normal bottom plate as well if we order the 7 deg?
Any updates on the group buy?Hi,
Sorry,Understood. Ill be keeping the order.
But please don't keep asking for modifying orders...
The quantity is still changing every week now.
We'd love to help you guys to meet your requirement, but if the quantity keeps changing.
We're not able to place the case order before quantity confirmation.
It's not a lot, we can't afford too many extra or cancelation after place the order.
And we can't just ignore requests, cause PayPal will simply refund if buyer open request...
Is it still possible to join this group buy as it seems that the website is still open for orders?Sorry.
Hi,Any pictures available? Or any updates on when it might ship.
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship :)
Yes, will update some pics later when receive.Hi,Any pictures available? Or any updates on when it might ship.
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship :)
Sent from my iPhone using Tapatalk Pro
Yes, will update some pics later when receive.Hi,Any pictures available? Or any updates on when it might ship.
CNC is processing and should finish in 1 month.
But we got a concern that screw in stabs might not available yet by then.
We'll contact people who bought stabs and ask if you prefer refund or change stabs if still no news when we're ready to ship :)
Sent from my iPhone using Tapatalk Pro
We just got update for stabs this week as we mentioned in stabs GB.
They should arrive in 6-8 weeks.
Can we still order since the site let's us?
Any link to the discord I dont see any here.Can we still order since the site let's us?
Somebody asked in the discord and the answer was no unfortunately
Any link to the discord I dont see any here.Can we still order since the site let's us?
Somebody asked in the discord and the answer was no unfortunately
Sent from my iPhone using Tapatalk Pro
Show Image(https://imgur.com/edXhHm4.jpg)
Wait, what's up with this pic? Is this case/plate compatible with PFU HHKB PCBs and Topre housings?!
When I go to the website, I'm able to order as it says everything is in stock, am I still able to order a kit?
So is this an exit scam or? No updates whatsoever.
Sent from my iPhone using Tapatalk Pro
So is this an exit scam or? No updates whatsoever.
Sent from my iPhone using Tapatalk Pro
Some updates posted in Discord:
https://discord.gg/fpXpcN
So is this an exit scam or? No updates whatsoever.
Sent from my iPhone using Tapatalk Pro
So is this an exit scam or? No updates whatsoever.
Sent from my iPhone using Tapatalk Pro
Updates from Sennin are usually few and far between, best case is hitting up the Duyo discord someone else in here linked. Chiwi R1 was similar, but the end product was perfect.
Any update on this?
lolAny update on this?
One month later...
Sennin32: Last reply is they’ll deliver the case during dec 16-20
From the Doyu Studio discord, on dec 10:They delayed= =Code: [Select]Sennin32: Last reply is they’ll deliver the case during dec 16-20
Any update on the keyboard.
Also is there a way to join the discord for more frequent updates?
Is Sennin32 still posting updates on Discord?
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.
Is Sennin32 still posting updates on Discord?
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.
Yes he is but the updates are pretty sparring.
Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then
Is Sennin32 still posting updates on Discord?
Why does he not posting updates in this GB thread anymore?
Did he just run away with our money?
Such an irresponsible person I’ve ever met in this community.
Yes he is but the updates are pretty sparring.
Basically the brass plates and weights are done and have been shipped to him a week or two ago but he hasn't responded since then
Could you please share the plate file since the Discord link is invalid.
Seems everything is done by now right?
It's ridiculous that he has been dealing with the plates over a year if he was really doing it.
Will we run away with your money?
Maybe A_A
Anybody got a working invite link to the discord, seems the older one is invalid. If the discord is even around anymore.
Really wish I canceled this a long time ago, when there was still time left to do it on paypal.Will we run away with your money?
Maybe A_A
I mean...
Years after giving up on this one, just got an address confirmation email for shipping.