[Preorder] TX1800v2 [Finished]

[popkorn62]

You can now order just plates + pcbs from kin.


======••••======
http://txkeyboards.com/

Please click LOG IN to register. Bottom page is for newsletter only.

Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.

[ihalatch]

I can't save my address and hence can't proceed to checkout??? It's impossible to order anything from this website. Very frustrating experience!

[popkorn62]

I can't save my address and hence can't proceed to checkout??? It's impossible to order anything from this website. Very frustrating experience!

I have replied to all of your tickets and still could not find out what is wrong. I have tested with multiple accounts as well. Please keep our conversation off this thread.

P/S: I apologize for the buggy website. I definitely am not one of the decent coders lol. I tried to make it work in all scenarios but the complication came from different shipping + payment methods for different countries/products. Anyway, if anyone else has any problems with the website, please let me know thru PM or tickets. Thank you.

[popkorn62]

Using some pics on this thread for the store's banners. Please let me know if you want me to take your pics down .

[roostrc0gburn]

Using some pics on this thread for the store's banners. Please let me know if you want me to take your pics down .

just credit my picture if you're going to use it

[heckenjoni]

what bottom row options do i have on the tx1800v2 ?

[ihalatch]

what bottom row options do i have on the tx1800v2 ?

1.5 | 1.5 | 7 |1.5 | 1.5 |
1.25 | 1.25 | 1.25 | 6.25 | 1.5 | 1.5 |

[duynguyenle]

There's also 1.5-1-1.5-6-1.5-1.5 (remember to use offset stemmed 6u spacebar)

Also you can substitute a 6.25u spacebar for split spacebar of 2.25, 2.75 and 1.25u arrangements

[KetchyKech]

You can now order just plates + pcbs from kin.


======••••======
http://txkeyboards.com/

Please click LOG IN to register. Bottom page is for newsletter only.

Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.

i need a tx75% pcb, where can i has dis! 

[Uleoja]

I just got mine built.  Very fun build!

Anybody have instructions on how to change the RGB effects?

[Puddsy]

I just got mine built.  Very fun build!

Anybody have instructions on how to change the RGB effects?

https://geekhack.org/index.php?topic=83950.0

[popkorn62]

You can now order just plates + pcbs from kin.


======••••======
http://txkeyboards.com/

Please click LOG IN to register. Bottom page is for newsletter only.

Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.

i need a tx75% pcb, where can i has dis! 

Hi there,

Please contact Leeku. As far as I know, Kin doesn’t have it .


======••••======
http://txkeyboards.com/

Please click LOG IN to register. Bottom page is for newsletter only.

Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.

[DillonHightower]

Question! 

Those of you who have built this. Do you break off tabs at top and bottom of PCB??

I am getting ready to put plate on and switches and need this info asap

[Puddsy]

Question! 

Those of you who have built this. Do you break off tabs at top and bottom of PCB??

I am getting ready to put plate on and switches and need this info asap

yeah you gotta break those bits off

send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking of

[DillonHightower]

Question! 

Those of you who have built this. Do you break off tabs at top and bottom of PCB??

I am getting ready to put plate on and switches and need this info asap

yeah you gotta break those bits off

send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking of

pmed

[DillonHightower]

Question! 

Those of you who have built this. Do you break off tabs at top and bottom of PCB??

I am getting ready to put plate on and switches and need this info asap

yeah you gotta break those bits off

[Puddsy]

Question! 

Those of you who have built this. Do you break off tabs at top and bottom of PCB??

I am getting ready to put plate on and switches and need this info asap

yeah you gotta break those bits off

send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking of

Show Image

ya break em off

[DillonHightower]

Question! 

Those of you who have built this. Do you break off tabs at top and bottom of PCB??

I am getting ready to put plate on and switches and need this info asap

yeah you gotta break those bits off

send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking of

Show Image

ya break em off

any advice to do this the safest way? I have never had to do such things.

[DillonHightower]

I just ran a razor across the seams and it came off pretty easy. Thanks for the confirm puddsy

[Uleoja]

I just got mine built.  Very fun build!

Anybody have instructions on how to change the RGB effects?

https://geekhack.org/index.php?topic=83950.0

Perfect!  I got the firmware updated and that that seemed to fix the problem.  Thank you very much!

[Puddsy]

I just got mine built.  Very fun build!

Anybody have instructions on how to change the RGB effects?

https://geekhack.org/index.php?topic=83950.0

Perfect!  I got the firmware updated and that that seemed to fix the problem.  Thank you very much!

:thumbsup:

[popkorn62]

Hi guys,

As of this point, I just need to wait for Kin to count the TX1800 v2 extras he has then we can start the sale.

[PleaseBeMyFriend]

Regarding the extras, are those to ship out asap once we order?

[popkorn62]

Regarding the extras, are those to ship out asap once we order?

Yes.


======••••======
http://txkeyboards.com/

Please click LOG IN to register. Bottom page is for newsletter only.

Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.

[PleaseBeMyFriend]

Sorry if this was in the thread somewhere, what's the pricing going to look like?

[popkorn62]

Sorry if this was in the thread somewhere, what's the pricing going to look like?

Hi, please visit the website on my signature.

Shipping will be around 30-40 to Asia, $50-$60 to EU, $70-80 to America

[stoic-lemon]

Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?

[duynguyenle]

Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?

I have been having no ends of trouble with my PCB. Seems to be corrupting itself every so often which usually requires reflashing the bootloader using an ISP programmer. Getting sick of dealing with these problems. I really want the QMK replacement PCB to arrive so I can rebuild my board. Currently my TX1800v2 is sitting in the corner unused because the PCB borks itself every couple of day and I am getting tired of having to open up the case repeatedly to reflash

[wholypantalones]

Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?

I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.

[duynguyenle]

Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?

I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.

Except that's not the latest version of the firmware

The latest is v171209. Jigon mapping software is still at v170419

Also worth it to note that I have both MX and Alps version of the Leeku A.87 PCBs and have no trouble running v170419. Whatever problem I've been having appears to originate from v171209

[stoic-lemon]

I have been having no ends of trouble with my PCB. Seems to be corrupting itself every so often which usually requires reflashing the bootloader using an ISP programmer. Getting sick of dealing with these problems. I really want the QMK replacement PCB to arrive so I can rebuild my board. Currently my TX1800v2 is sitting in the corner unused because the PCB borks itself every couple of day and I am getting tired of having to open up the case repeatedly to reflash

What PCB are you getting as a replacement?

I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.

The L3 firmware now shows 171209. Are you using that one with 170419?

[duynguyenle]

I have been having no ends of trouble with my PCB. Seems to be corrupting itself every so often which usually requires reflashing the bootloader using an ISP programmer. Getting sick of dealing with these problems. I really want the QMK replacement PCB to arrive so I can rebuild my board. Currently my TX1800v2 is sitting in the corner unused because the PCB borks itself every couple of day and I am getting tired of having to open up the case repeatedly to reflash

What PCB are you getting as a replacement?

I've got a Hineybush 1800 prototype coming in the mail, and plan to buy a couple QMK PCBs from TKC when that gets released

[stoic-lemon]

Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.

[duynguyenle]

Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.

TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB

[DillonHightower]

My rgb leds on the bottom just stopped working all together after 2 days of use. # 1 and 2 work 3-20 do not. Not sure what the issue is. I’ve tried to reflash and differnt USB ports with no luck. Wondering if something died or if it is a firmware issue

[roostrc0gburn]

My rgb leds on the bottom just stopped working all together after 2 days of use. # 1 and 2 work 3-20 do not. Not sure what the issue is. I’ve tried to reflash and differnt USB ports with no luck. Wondering if something died or if it is a firmware issue

o ****. another leeku pcb bites the dust...

[wholypantalones]

Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?

I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.

Except that's not the latest version of the firmware

The latest is v171209. Jigon mapping software is still at v170419

Also worth it to note that I have both MX and Alps version of the Leeku A.87 PCBs and have no trouble running v170419. Whatever problem I've been having appears to originate from v171209

My bad, I should read more before replying. Carry on.

[Uleoja]

Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.

TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB

Do all those PCB's fit in the TX1800v2? 

[Puddsy]

Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.

TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB

Do all those PCB's fit in the TX1800v2?

i think so, since both are meant to fit an original 1800 case

[Petch]

Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.

TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB

Indicator LEDs are not going to match up I don't think, looking at that QMK one
Do all those PCB's fit in the TX1800v2?

i think so, since both are meant to fit an original 1800 case

[duynguyenle]

Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.

TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB

Indicator LEDs are not going to match up I don't think, looking at that QMK one
Do all those PCB's fit in the TX1800v2?

i think so, since both are meant to fit an original 1800 case

Of course indicator LEDs are gonna match up, the TX1800 case has the holes in the same position as an OG 1800 case. In fact, the Leeku 1800 PCB works in both the TX1800 case an an OG case.

Source: Have had an Leeku PCB built inside OG G80-1800 case for years

[Petch]

My bad, was thinking of Dolch 1800

[TerryMathews]

My bad, was thinking of Dolch 1800

The TKC PCB can be used there as well, you just have to retain and wire up the Dolch indicator PCB.

[Jhors2]

Are extra bags going to be listed on the site by chance? Any ETA on when if so?

[Puddsy]

Are extra bags going to be listed on the site by chance? Any ETA on when if so?

doubtful, kin seems to like to bundle them with boards and then sell extras that way

[senortighto]

My rgb leds on the bottom just stopped working all together after 2 days of use. # 1 and 2 work 3-20 do not. Not sure what the issue is. I’ve tried to reflash and differnt USB ports with no luck. Wondering if something died or if it is a firmware issue

o ****. another leeku pcb bites the dust...

I also have a number of LEDs that don't work on mine, the only ones that do sorta work/light up are the one next to the ESC key, the one next to the Caps Lock key, and the ones by F5 and F8. Of those four, only the one next to Caps Lock will operate normally with how it is set in the JigOn app. The rest sorta flash in and out in a more or less random fashion. I was personally less impressed by the quality of the PCB, but the case is 100% awesome and if you have the means, I highly suggest you pick one up.

I'll probably get a different 1800 PCB in the future if the LED situation bugs me enough, but for now, from a functional perspective on typing alone, it works great and I have been very happy with it.

[Puddsy]

My rgb leds on the bottom just stopped working all together after 2 days of use. # 1 and 2 work 3-20 do not. Not sure what the issue is. I’ve tried to reflash and differnt USB ports with no luck. Wondering if something died or if it is a firmware issue

o ****. another leeku pcb bites the dust...

I also have a number of LEDs that don't work on mine, the only ones that do sorta work/light up are the one next to the ESC key, the one next to the Caps Lock key, and the ones by F5 and F8. Of those four, only the one next to Caps Lock will operate normally with how it is set in the JigOn app. The rest sorta flash in and out in a more or less random fashion. I was personally less impressed by the quality of the PCB, but the case is 100% awesome and if you have the means, I highly suggest you pick one up.

I'll probably get a different 1800 PCB in the future if the LED situation bugs me enough, but for now, from a functional perspective on typing alone, it works great and I have been very happy with it.

are you using the right version of the firmware? that sounds like it might be firmware issue rather than a CB one

[popkorn62]

In case you missed it, you can now order plate/pcb/metal gaskets (very very limited) for TX1800 v2 directly from kin on the website.

I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.

Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.

Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.

[shadowrealmwarez]

In case you missed it, you can now order plate/pcb/metal gaskets (very very limited) for TX1800 v2 directly from kin on the website.

I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.

Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.

Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.

Will any more TX 1800v2's be posted for sale by chance?

[popkorn62]

In case you missed it, you can now order plate/pcb/metal gaskets (very very limited) for TX1800 v2 directly from kin on the website.

I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.

Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.

Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.

Will any more TX 1800v2's be posted for sale by chance?

To be honest, when will that happen is entirely up to Kin. He seems to be busy w other stuff *cough*tx60/65*cough* recently and LNY is coming up as well. However, 100% there will be an extra sale. He will not just leave them there collecting dust forever.