Alright after further investigation i can safely say it's thestabs. Applying extra pressure left and right of the spacebar/return keycap permanently locks the keycap in a lower position. Since the bottom out is the same and the initial height is different, the stab stems force the switch to start at a lower initial position. This, however, is not the case with the backspace key/cap. It might be due to the smaller length. If i mount the spacebar and return by applying pressure only on the middle where the switch itself is then its fine. Stabs came with the b.mini pcb from winkeyless.kr. is there an easy fix for this?
Sent from my HTC One M9 using Tapatalk