Post your Topre Keyboard

[Sent]

heh

Show Image

DSC_5843 by epzyy, on Flickr

Dang, I bet these caps are gonna look even better on that dark grey HHKB.

[epzy]

heh

Show Image

DSC_5843 by epzyy, on Flickr

Dang, I bet these caps are gonna look even better on that dark grey HHKB.

For sure!

[dustinhxc]

Show Image

 :-*

Amazing!!!

[deci]

Show Image

 :-*

gat damn!

[atlas3686]

Show Image

 :-*

Damn man, feel like I have a man crush at the moment, bascially come to GH to comment on Hipsters awesome pics  :))

[VesperSAINT]

Show Image

 :-*

Show Image

Amazing!!!

Pretty much the perfect reaction .gif to this photo. Dayum, that keyboard is fine...

[naasfu]

hell yes.

[VesperSAINT]

I wish my door knob was made of chocolate...

[naasfu]

I wish my door knob was made of chocolate...

mmm chocolate clacks.

[doublin]

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.


Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

[epzy]

[billnye]

Show Image

DCS_5903 by epzyy, on Flickr

Ugly smh

[epzy]

Show Image

DCS_5903 by epzyy, on Flickr

Ugly smh

like your gf, bong :-*

[HipsterPunks]

Show Image

DCS_5903 by epzyy, on Flickr

Im feeling this, i need to learn to type on blanks looks so clean.  :thumb:

[epzy]

Show Image

DCS_5903 by epzyy, on Flickr

Im feeling this, i need to learn to type on blanks looks so clean.  :thumb:

go go go, I believe in you!

[Signature]

Show Image

DCS_5903 by epzyy, on Flickr

[byker]

Show Image

DCS_5903 by epzyy, on Flickr

I need my type-s to show up right now!  :p I can't wait any longer.

[VesperSAINT]

I wish my door knob was made of chocolate...

mmm chocolate clacks.

mmmmmmmmmmmmmmmmmmm... it would take a lot of will power to eat those... lol... Imagine if they melted when you opened them...

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.

Show Image

Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

Show Image

OOO very simple but i like!! Unfortunately, from what I can see, that bended part was pulled too hard on when opening it, and that'd be rather hard to fix... but I don't know too much because I've only opened up my HHKB once. Hopefully someone can help you, but if it's what I think it is, that'll be kind of difficult to fix.

Show Image

DCS_5903 by epzyy, on Flickr

Mr. Clean Approves.

[HipsterPunks]

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.

Show Image

Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

Show Image

That happened to my first HHKB, i couldnt figure it out after opening and rescrewing a couple times. Eventually i figured out the wires connecting to the controller werent laying flat and pushing up on the case. Slide the plastic piece holding the wires to the middle and make sure they are laying flat. Thats what did it for me

[VesperSAINT]

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.

Show Image

Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

Show Image

That happened to my first HHKB, i couldnt figure it out after opening and rescrewing a couple times. Eventually i figured out the wires connecting to the controller werent laying flat and pushing up on the case. Slide the plastic piece holding the wires to the middle and make sure they are laying flat. Thats what did it for me

Hero!

[ComradeSniper]

Got an Octopink today. Absolutely perfect match with the pink blanks 

More

[nubbinator]

Got an Octopink today. Absolutely perfect match with the pink blanks 

More

Show Image

Show Image

Show Image

Nice.  Milk Pink would probably be closer, but that slightly different color is sexy.  I love my MX Octopink, but don't have anything to go with it.

[Puddsy]

Got some updates to my Realforce on Thursday and Friday.

http://imgur.com/a/sFtkZ

[Sent]

Got an Octopink today. Absolutely perfect match with the pink blanks 

More

Show Image

Show Image

Show Image

Pink blanks...hnnnggggg. :eek:

[VesperSAINT]

Got an Octopink today. Absolutely perfect match with the pink blanks 

More

Show Image

Show Image

Show Image

IT'S TOO GOOD. LEAVE ME ALONE.




This reminds me too much of the time when I let BroCaps' Type-S get away... I had the chance but I sat on it too long...

[Sent]

This reminds me too much of the time when I let BroCaps' Type-S get away... I had the chance but I sat on it too long...

This site has given me so many instances of regret.  I know that feel.

[naasfu]

I wish my door knob was made of chocolate...

mmm chocolate clacks.

mmmmmmmmmmmmmmmmmmm... it would take a lot of will power to eat those... lol... Imagine if they melted when you opened them...

Yeah I would never eat them, and they would just melt.  That would be sad.  But imagine chocolate skulls with marshmallow eyes...

Got an Octopink today. Absolutely perfect match with the pink blanks 

So pretty!  wtb Hello Kitty Topre caps.

[ComradeSniper]

Got an Octopink today. Absolutely perfect match with the pink blanks 

More

Show Image

Show Image

Show Image

Nice.  Milk Pink would probably be closer, but that slightly different color is sexy.  I love my MX Octopink, but don't have anything to go with it.

I think Milk Pink is just a little too light and Tickle Me Pink is just a little too dark. Now that I look at it again, it would be a better match if it was the slightest bit lighter, but I can hardly tell the difference. Depends a lot on the lighting.

Got an Octopink today. Absolutely perfect match with the pink blanks  :D

More

Show Image

Show Image

Show Image

Pink blanks...hnnnggggg.

Got an Octopink today. Absolutely perfect match with the pink blanks 

More

Show Image

Show Image

Show Image

IT'S TOO GOOD. LEAVE ME ALONE.

Show Image

This reminds me too much of the time when I let BroCaps' Type-S get away... I had the chance but I sat on it too long...

Got an Octopink today. Absolutely perfect match with the pink blanks 

So pretty!  wtb Hello Kitty Topre caps.

Thanks!

The 23u and 23ub went back into production....so maybe there's hope that the blanks will too 

[Elocutive]

If blanks went back into production I am buying 1 of every color instantly.

[demik]

how can you guys deal with the wrong profiled capslock/control/shift

[clacktalk]

Got an Octopink today. Absolutely perfect match with the pink blanks 

More

Show Image

Show Image

Show Image

tru endgame. daaaaaaaaaamn

how can you guys deal with the wrong profiled capslock/control/shift

i can't either because I'm weak : ' [

[doublin]

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.

Show Image

Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

Show Image

That happened to my first HHKB, i couldnt figure it out after opening and rescrewing a couple times. Eventually i figured out the wires connecting to the controller werent laying flat and pushing up on the case. Slide the plastic piece holding the wires to the middle and make sure they are laying flat. Thats what did it for me

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.

Show Image

Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

Show Image

OOO very simple but i like!! Unfortunately, from what I can see, that bended part was pulled too hard on when opening it, and that'd be rather hard to fix... but I don't know too much because I've only opened up my HHKB once. Hopefully someone can help you, but if it's what I think it is, that'll be kind of difficult to fix.

Wow thanks a lot guy! I tried putting the ribbon at a flatter state and now the bend is gone. Thank god I don't have to send the HHKB back to Japan for repair.

[VesperSAINT]

So after having moved the red mods to my HHKB, I didn't have enough to fill the RF87UB so here it is as it is now~

[HoffmanMyster]

So after having moved the red mods to my HHKB, I didn't have enough to fill the RF87UB so here it is as it is now~

Show Image

Show Image

You suck

[rowdy]

So after having moved the red mods to my HHKB, I didn't have enough to fill the RF87UB so here it is as it is now~

Show Image

Show Image

Getting ready early for Christmas?

[demik]

well unless you put your stuff up on the 25th technically you always get ready early

[rowdy]

well unless you put your stuff up on the 25th technically you always get ready early

But not usually this early!

[Sent]

well unless you put your stuff up on the 25th technically you always get ready early

But not usually this early!

Never too early for Christmas.

"Jingle bells...jingle bells..."

[demik]

well unless you put your stuff up on the 25th technically you always get ready early

But not usually this early!

HA!
here as soon as it hits october halloween, thanksgiving, and xmas all get sold together. oh and let us not forget black friday!

[Belfong]

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.

Show Image

Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

Show Image

That happened to my first HHKB, i couldnt figure it out after opening and rescrewing a couple times. Eventually i figured out the wires connecting to the controller werent laying flat and pushing up on the case. Slide the plastic piece holding the wires to the middle and make sure they are laying flat. Thats what did it for me

Received a white blank keycaps and the Ctrl & Esc caps from Amazon JP today and IMO it looks better compare to the blank black caps.

Show Image

Also, I noticed a bend/misalignment on the HHKB case from previous mod I did on the HHKB(transferring domes, orings, lubing, etc) and was hoping whether anyone have any idea how to repair/solve it. I tried removing the PCB and housing and just screwing the top and bottom case only, but the bend is still there.

Show Image

OOO very simple but i like!! Unfortunately, from what I can see, that bended part was pulled too hard on when opening it, and that'd be rather hard to fix... but I don't know too much because I've only opened up my HHKB once. Hopefully someone can help you, but if it's what I think it is, that'll be kind of difficult to fix.

Wow thanks a lot guy! I tried putting the ribbon at a flatter state and now the bend is gone. Thank god I don't have to send the HHKB back to Japan for repair.

You know, this should be kept in some FAQ or something. Would be good if we have photo so we know what exactly to fix. I bet a lot of modder will face this problem!

[nubbinator]

[Flyersfan1]

Oh my goodness, that looks incredible Nubbinator.  I love the tablecloth/wallpaper in the background too!  You're a new convert and probably have one the best looking HHKB's already! 

[ComradeSniper]

Show Image

Show Image

Show Image

I'm still in awe of how well that turned out.

Btw, where did you get that background? I've been looking for some new background ideas but my local fabric shops don't have anything interesting.

[Sent]

Glad you kept the space bar black,  Nubs. 

[nubbinator]

I'm still in awe of how well that turned out.

Btw, where did you get that background? I've been looking for some new background ideas but my local fabric shops don't have anything interesting.

It's paper from my local art supply store.  They have a ton of awesome paper. 

Glad you kept the space bar black,  Nubs. 

I forgot the space bar was ABS, so I didn't have much choice (sorry for the crappy cell phone pic):

More

[ComradeSniper]

I'm still in awe of how well that turned out.

Btw, where did you get that background? I've been looking for some new background ideas but my local fabric shops don't have anything interesting.

It's paper from my local art supply store.  They have a ton of awesome paper. 

Glad you kept the space bar black,  Nubs. 

I forgot the space bar was ABS, so I didn't have much choice (sorry for the crappy cell phone pic):

Dat spacebar 


I'll have to check out some arts and crafts stores though, thanks!

[pr0ximity]

Got some updates to my Realforce on Thursday and Friday.

http://imgur.com/a/sFtkZ

Jellyyyyy, really wanted to go to ESL NY. Just getting the chance to watch EG v. VG now and it's crazy.

[demik]

how to ruin a keyboard in 2 easy steps.

obtain sharpie. give to make believe athletes to write on your keyboard

[VesperSAINT]

So after having moved the red mods to my HHKB, I didn't have enough to fill the RF87UB so here it is as it is now~

Show Image

Show Image

You suck

I love you too, honey ~<3

Getting ready early for Christmas?

It's always Christmas in this thread

well unless you put your stuff up on the 25th technically you always get ready early

But not usually this early!

Never too early for Christmas.

"Jingle bells...jingle bells..."

Amen to that, brother.

HA!
here as soon as it hits october halloween, thanksgiving, and xmas all get sold together. oh and let us not forget black friday!

'MURICA!!!

Show Image

Show Image

Show Image

Let's fight, bro. That is so damn good.... Absolutely remarkable how it turned out. You be a true purple bro.

[byker]

Show Image

Show Image

Show Image

Did I miss something? Where did you get those modifiers from nubbs??