Author Topic: [CTRL]ALT 60 GB (Read 99354 times)

Lubed Up Slug · « **Reply #250 on:** Sat, 06 December 2014, 01:13:09 »

So when will this be shipping?

henz · « **Reply #251 on:** Sun, 07 December 2014, 09:18:56 »

Quote from: Lubed Up Slug on Sat, 06 December 2014, 01:13:09

So when will this be shipping?

If you ordered pcb only you should have gotten it already i guess. But if you order a case too i guess the answer is whenever bunny says that they are ready here in the thread

Have not seen any updates about it.

BunnyLake · « **Reply #252 on:** Sun, 07 December 2014, 09:20:33 »

Quote from: Lubed Up Slug on Sat, 06 December 2014, 01:13:09

So when will this be shipping?

yeah if you ordered the first round of pcbs they have gone out, unless you made an order in the last week or so

as for the case orders, they will go out as soon as we have them

asdfjkl36 · « **Reply #253 on:** Thu, 11 December 2014, 06:03:53 »

Quote from: henz on Mon, 10 November 2014, 02:49:44

Any news about switches,resistors,leds etc ?

any update on this?

would like to put in an order to get these before Christmas if possible.

Been holding off from paying the $25 shipping from Gon.

henz · « **Reply #254 on:** Thu, 11 December 2014, 07:01:07 »

Quote from: asdfjkl36 on Thu, 11 December 2014, 06:03:53

Quote from: henz on Mon, 10 November 2014, 02:49:44
Any news about switches,resistors,leds etc ?

any update on this?

would like to put in an order to get these before Christmas if possible.

Been holding off from paying the $25 shipping from Gon.

It seems CTRL alt is running al kinds of stuff all over the place so i guess this does not have the highest prio.

I found everything i needed from a local supplier(Sweden) and its easier when you know what you are looking for, i found everything except good in siwtch leds. PM me if you need any help also you should be able to find everything in the US i guess.

BunnyLake · « **Reply #255 on:** Thu, 11 December 2014, 08:15:42 »

Quote from: asdfjkl36 on Thu, 11 December 2014, 06:03:53

Quote from: henz on Mon, 10 November 2014, 02:49:44
Any news about switches,resistors,leds etc ?

any update on this?

would like to put in an order to get these before Christmas if possible.

Been holding off from paying the $25 shipping from Gon.

sorry ive just had like zero time the last 6 or so weeks

we have everything here its just a case of doing pics etc

we are also doing a rebuild on the site right now, so waiting for that to finish up

asdfjkl36 · « **Reply #256 on:** Thu, 11 December 2014, 13:26:34 »

Quote from: BunnyLake on Thu, 11 December 2014, 08:15:42

Quote from: asdfjkl36 on Thu, 11 December 2014, 06:03:53
Quote from: henz on Mon, 10 November 2014, 02:49:44
Any news about switches,resistors,leds etc ?

any update on this?

would like to put in an order to get these before Christmas if possible.

Been holding off from paying the $25 shipping from Gon.

sorry ive just had like zero time the last 6 or so weeks

we have everything here its just a case of doing pics etc

we are also doing a rebuild on the site right now, so waiting for that to finish up

Dont be sorry. I'm just impatient even though i wont be building it until after the holidays, i want to have all the stuff together or at least ordered to get it ASAP.
I have no real need to have them right now.

I understand and i apologize for being pushy about it.

I'll go ahead and wait and use the difference in shipping price and cost in items to tip you guys. You deserve it for all the hard work you guys put in.

Thanks!

MrRooks · « **Reply #257 on:** Sat, 20 December 2014, 12:10:47 »

I couldn't find this clearly written so sorry for asking... Is this a GON PCB? If so how is it different from the NerD 2.0?

Thanks!

BunnyLake · « **Reply #258 on:** Sat, 20 December 2014, 12:27:32 »

Quote from: MrRooks on Sat, 20 December 2014, 12:10:47

I couldn't find this clearly written so sorry for asking... Is this a GON PCB? If so how is it different from the NerD 2.0?

Thanks!

yeah its a nerd 60, its just rebranded for us for a limited edition run

Zentaaa · « **Reply #259 on:** Sat, 20 December 2014, 12:42:53 »

Hey bunz I ordered a PCB only on the 27th of november, any idea when it will be shipped? Thanks

MrRooks · « **Reply #260 on:** Sat, 20 December 2014, 13:39:08 »

Quote from: BunnyLake on Sat, 20 December 2014, 12:27:32

Quote from: MrRooks on Sat, 20 December 2014, 12:10:47
I couldn't find this clearly written so sorry for asking... Is this a GON PCB? If so how is it different from the NerD 2.0?

Thanks!

yeah its a nerd 60, its just rebranded for us for a limited edition run

Cool! thanks!

BunnyLake · « **Reply #261 on:** Sat, 20 December 2014, 13:44:21 »

Quote from: Zentaaa on Sat, 20 December 2014, 12:42:53

Hey bunz I ordered a PCB only on the 27th of november, any idea when it will be shipped? Thanks

i went though all the pcbs i had here, i just need to grab the extra one from margo, so ill get that sorted for you soon, sorry about that and we have a bunch more on the way shortly as well

Flamingchook · « **Reply #262 on:** Sat, 20 December 2014, 21:25:12 »

Any eta on the cases and assembly at this point?

BunnyLake · « **Reply #263 on:** Sun, 21 December 2014, 06:29:29 »

Quote from: Flamingchook on Sat, 20 December 2014, 21:25:12

Any eta on the cases and assembly at this point?

should be shortly after christmas, i will be messaging everyone to confirm builds soon

henz · « **Reply #264 on:** Mon, 19 January 2015, 15:38:02 »

Quote from: BunnyLake on Sun, 21 December 2014, 06:29:29

Quote from: Flamingchook on Sat, 20 December 2014, 21:25:12
Any eta on the cases and assembly at this point?

should be shortly after christmas, i will be messaging everyone to confirm builds soon

Any news? Want to get my soldering on

BunnyLake · « **Reply #265 on:** Mon, 19 January 2015, 16:42:22 »

yeah i will have a date very soon good sir

Phinominal · « **Reply #266 on:** Fri, 23 January 2015, 15:21:44 »

Is it possible to have the plate support HHKB layout? With the bottom 2 corners not cut out for the switches.

BunnyLake · « **Reply #267 on:** Fri, 23 January 2015, 15:32:59 »

Quote from: Phinominal on Fri, 23 January 2015, 15:21:44

Is it possible to have the plate support HHKB layout? With the bottom 2 corners not cut out for the switches.

sadly not at this time

DanielT · « **Reply #268 on:** Sun, 01 February 2015, 05:24:53 »

Is the PCB still available ? I would like to order one. On the website it looks like it's available but I want to make sure.

BunnyLake · « **Reply #269 on:** Sun, 01 February 2015, 08:30:38 »

Quote from: DanielT on Sun, 01 February 2015, 05:24:53

Is the PCB still available ? I would like to order one. On the website it looks like it's available but I want to make sure.

it is, although itll be about 3 weeks until i have more land with me, so just be aware of that,

thatll be the alst shipment along with the cases, and i wont be running then again after that

BunnyLake · « **Reply #270 on:** Mon, 02 February 2015, 08:17:15 »

update

the next run of pcbs will be with us the beginning of march, so 4 weeks

the cases will be with us late march, about 7 weeks

all pcb and pcb and case orders will be sent right away (90% of orders)

there is only a handful of custom builds for these, they will be turned around within about a week

so slightly longer than expected but we wanted these absolutely perfect

Ouro · « **Reply #271 on:** Thu, 05 February 2015, 07:45:00 »

Is the housing an acrylic plate sandwiched in between two aluminum plates?

BunnyLake · « **Reply #272 on:** Thu, 05 February 2015, 07:46:12 »

Quote from: Ouro on Thu, 05 February 2015, 07:45:00

Is the housing an acrylic plate sandwiched in between two aluminum plates?

yeah that is correct, it has an acrylic section to allow for a backlighting glow

henz · « **Reply #273 on:** Wed, 11 February 2015, 01:13:53 »

Quote from: BunnyLake on Mon, 02 February 2015, 08:17:15

update

the next run of pcbs will be with us the beginning of march, so 4 weeks

the cases will be with us late march, about 7 weeks

all pcb and pcb and case orders will be sent right away (90% of orders)

there is only a handful of custom builds for these, they will be turned around within about a week

so slightly longer than expected but we wanted these absolutely perfect

will you still be sending confirmation pms? as i want to change my order a bit.

DanielT · « **Reply #274 on:** Fri, 13 February 2015, 08:24:24 »

Ok, placed my order today

This will be my third NerD60 board and a special edition

I liked the store, it's the first time I used it for anything else than Bro Caps Sales and I'm impressed. Hope I'll have the money for the GMK Hyperfuse, because that is one set that would be a shame to miss.

Bromono · « **Reply #275 on:** Fri, 13 February 2015, 09:27:34 »

I would love to get this as my next keyboard. With Gutz's Jailhouse Blues. Need to save the money for it.

Phinominal · « **Reply #276 on:** Wed, 18 February 2015, 02:57:00 »

Is the order link working for anyone else? Says the site is being remodeled.

Does that mean the groupbuy isn't going anymore?

radio_killah · « **Reply #277 on:** Wed, 18 February 2015, 11:34:26 »

Quote from: Phinominal on Wed, 18 February 2015, 02:57:00

Is the order link working for anyone else? Says the site is being remodeled.

Does that mean the groupbuy isn't going anymore?

I think it means the site is being remodeled.

Kidding. But I think that Ctrlalt said that the GB would be ending soon, so not sure if it will be up or not when the store comes back after they apply their changes.

BunnyLake · « **Reply #278 on:** Wed, 18 February 2015, 13:01:03 »

Quote from: radio_killah on Wed, 18 February 2015, 11:34:26

Quote from: Phinominal on Wed, 18 February 2015, 02:57:00
Is the order link working for anyone else? Says the site is being remodeled.

Does that mean the groupbuy isn't going anymore?

I think it means the site is being remodeled.

Kidding. But I think that Ctrlalt said that the GB would be ending soon, so not sure if it will be up or not when the store comes back after they apply their changes.

we will have some of the pcbs when the store comes back, but no more cases

MassiveAggresive · « **Reply #279 on:** Fri, 20 February 2015, 23:17:56 »

Will this pcb fit in an aluminum tex case?

DanielT · « **Reply #280 on:** Sat, 21 February 2015, 00:43:05 »

Quote from: MassiveAggresive on Fri, 20 February 2015, 23:17:56

Will this pcb fit in an aluminum tex case?

Yes, it fits in any Poker compatible case.

RavenII · « **Reply #281 on:** Thu, 26 February 2015, 14:40:36 »

Hang on, so this is still going on? I've been looking for a reasonably priced 60% PCB that has backlighting for almost 2 months now, and I JUST came across this?

Zentaaa · « **Reply #282 on:** Thu, 26 February 2015, 15:17:58 »

Is it possible that I can transfer my order to someone else as I no longer need it?

BunnyLake · « **Reply #283 on:** Thu, 26 February 2015, 15:34:31 »

Quote from: Zentaaa on Thu, 26 February 2015, 15:17:58

Is it possible that I can transfer my order to someone else as I no longer need it?

of course, you can change the address on your order at any time

Zentaaa · « **Reply #284 on:** Thu, 26 February 2015, 16:14:53 »

Quote from: BunnyLake on Thu, 26 February 2015, 15:34:31

Quote from: Zentaaa on Thu, 26 February 2015, 15:17:58
Is it possible that I can transfer my order to someone else as I no longer need it?

of course, you can change the address on your order at any time

Okay sweet, if anyone wants my order of a PCB then message me! Thanksssss

Phinominal · « **Reply #285 on:** Thu, 26 February 2015, 16:55:16 »

Quote from: Zentaaa on Thu, 26 February 2015, 16:14:53

Okay sweet, if anyone wants my order of a PCB then message me! Thanksssss

If only you had the case as well = (

Ngt · « **Reply #286 on:** Thu, 26 February 2015, 17:19:00 »

Bunny, do you know how many PCB will be remaining once the store is back alive?

BunnyLake · « **Reply #287 on:** Thu, 26 February 2015, 17:20:06 »

Quote from: Ngt on Thu, 26 February 2015, 17:19:00

Bunny, do you know how many PCB will be remaining once the store is back alive?

ill have somewhere between 7 or 8 spare in stock in a week or 2

Ngt · « **Reply #288 on:** Thu, 26 February 2015, 17:31:11 »

Quote from: BunnyLake on Thu, 26 February 2015, 17:20:06

Quote from: Ngt on Thu, 26 February 2015, 17:19:00
Bunny, do you know how many PCB will be remaining once the store is back alive?

ill have somewhere between 7 or 8 spare in stock in a week or 2

Cool thanks. Good to know.

RavenII · « **Reply #289 on:** Thu, 26 February 2015, 18:29:01 »

No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?

Sent · « **Reply #290 on:** Thu, 26 February 2015, 18:34:27 »

Quote from: RavenII on Thu, 26 February 2015, 18:29:01

No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?

I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.

Ngt · « **Reply #291 on:** Fri, 27 February 2015, 08:16:57 »

Quote from: Sent on Thu, 26 February 2015, 18:34:27

Quote from: RavenII on Thu, 26 February 2015, 18:29:01
No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?

I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.

I think he posted also that there weren't any case left.

EDIT: Here you go.

Quote from: BunnyLake on Wed, 18 February 2015, 13:01:03

we will have some of the pcbs when the store comes back, but no more cases

BunnyLake · « **Reply #292 on:** Fri, 27 February 2015, 08:18:18 »

Quote from: Ngt on Fri, 27 February 2015, 08:16:57

Quote from: Sent on Thu, 26 February 2015, 18:34:27
Quote from: RavenII on Thu, 26 February 2015, 18:29:01
No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?

I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.

I think he posted also that there weren't any case left.

i have 1 spare case left

i havent decided yet if im gonna keep it as like an extra for myself, or sell it, or give it away yet, we shall see

Ngt · « **Reply #293 on:** Fri, 27 February 2015, 08:19:44 »

Quote from: BunnyLake on Fri, 27 February 2015, 08:18:18

Quote from: Ngt on Fri, 27 February 2015, 08:16:57
Quote from: Sent on Thu, 26 February 2015, 18:34:27
Quote from: RavenII on Thu, 26 February 2015, 18:29:01
No, really... is this gb still active? Or is it in catch up/delivery phase? Is the board/plate so attainable?

I believe the cases will be arriving sometime in March. I am unsure if we ordered extras or not. As for PCB's, Bunny just posted that he'll have 7-8 spares in a week or two.

I think he posted also that there weren't any case left.

i have 1 spare case left

i havent decided yet if im gonna keep it as like an extra for myself, or sell it, or give it away yet, we shall see

That's interesting indeed! Bunny, you always have some nice surprise in your magician hat.

asdfjkl36 · « **Reply #294 on:** Fri, 27 February 2015, 08:38:07 »

Very interesting to see what you do with it

Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out

I mainly just can't wait to see how they came out

Ngt · « **Reply #295 on:** Fri, 27 February 2015, 08:43:05 »

Quote from: asdfjkl36 on Fri, 27 February 2015, 08:38:07

Very interesting to see what you do with it

Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out

I mainly just can't wait to see how they came out

If you are still interesting in case similar, hwood is running an IC atm: https://geekhack.org/index.php?topic=67194.0

You won't have the fancy details the CtrlAlt team added on it, but it still is nice.

asdfjkl36 · « **Reply #296 on:** Fri, 27 February 2015, 08:46:44 »

Quote from: Ngt on Fri, 27 February 2015, 08:43:05

Quote from: asdfjkl36 on Fri, 27 February 2015, 08:38:07
Very interesting to see what you do with it

Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out

I mainly just can't wait to see how they came out

If you are still interesting in case similar, hwood is running an IC atm: https://geekhack.org/index.php?topic=67194.0

You won't have the fancy details the CtrlAlt team added on it, but it still is nice.

Thanks, I'll keep and eye on it.

Maybe someone will end up (I don't know why but) selling their case in the classifieds and I'll pick it up. It would be nice to have the entire [CTRL]Alt setup though, so the custom case would be ideal

Ngt · « **Reply #297 on:** Fri, 27 February 2015, 09:02:59 »

Quote from: asdfjkl36 on Fri, 27 February 2015, 08:46:44

Quote from: Ngt on Fri, 27 February 2015, 08:43:05
Quote from: asdfjkl36 on Fri, 27 February 2015, 08:38:07
Very interesting to see what you do with it

Wish I would have known id be buying the GMK hyperfuse set. Then I would have bought the case instead of hesitate on it and miss out

I mainly just can't wait to see how they came out

If you are still interesting in case similar, hwood is running an IC atm: https://geekhack.org/index.php?topic=67194.0

You won't have the fancy details the CtrlAlt team added on it, but it still is nice.

Thanks, I'll keep and eye on it.

Maybe someone will end up (I don't know why but) selling their case in the classifieds and I'll pick it up. It would be nice to have the entire [CTRL]Alt setup though, so the custom case would be ideal

Yeah the case is definitely nice. I don't think someone will sell theirs soon. Perhaps some ordered multiple of them in order to sell them afterwards. If so it is going to be pricey I'm afraid.

Ngt · « **Reply #298 on:** Fri, 27 February 2015, 09:12:28 »

I don't remember but the PCB allows for both PCB mounting or case mounting right?

asdfjkl36 · « **Reply #299 on:** Fri, 27 February 2015, 09:58:44 »

Quote from: Ngt on Fri, 27 February 2015, 09:12:28

I don't remember but the PCB allows for both PCB mounting or case mounting right?

Works for pcb mounting, so if you find a plate then you can use plate mounted switches

As far as I know, they both work

News:

Author Topic: [CTRL]ALT 60 GB (Read 99354 times)