Author Topic: [GB] TGR-Jane custom TKL keyboard (COMPLETED) (Read 213991 times)

FreeChemicals · « **Reply #250 on:** Thu, 10 September 2015, 16:53:33 »

Quote from: yuktsi on Thu, 10 September 2015, 08:12:04

Update 10/09/2015

Sorry guys, I just screwed everything
For those who ordered 86/87 layout, if you are planning to go for 87 layout, please send me a PM
Hmmmm...

Oh? What happened?

PrinsPils · « **Reply #251 on:** Fri, 11 September 2015, 06:02:28 »

Yes, please share. Because depending on the issue i might wanna take over uJalleds order.

yuktsi · « **Reply #252 on:** Fri, 11 September 2015, 06:29:10 »

I made a mistake. The plate supports only 84 and 86 layouts. If anyone insisted 87 layout, please pm.

romevi · « **Reply #253 on:** Tue, 15 September 2015, 22:51:01 »

DAMN, yuktsi! Why you holding out?!

http://tgr.my/

KnivesM · « **Reply #254 on:** Tue, 15 September 2015, 23:01:40 »

Quote from: romevi on Tue, 15 September 2015, 22:51:01

DAMN, yuktsi! Why you holding out?!

(Attachment Link)

(Attachment Link)

http://tgr.my/

Acrylic 456? or just feet can't tell from the pics focus.

Yuktsi,
Very nice either way, is the 456 rework just a proto for the Jane where you were testing the shops or is that coming up sometime?

wilarseny · « **Reply #255 on:** Wed, 16 September 2015, 01:10:19 »

Holy wow that's dope. Got a GON acrylic and a winkeyless.kr one too but wouldn't be able to hold out if that went up for a separate gb, wink wink

yuktsi · « **Reply #256 on:** Wed, 16 September 2015, 02:46:09 »

Quote from: KnivesM on Tue, 15 September 2015, 23:01:40

Quote from: romevi on Tue, 15 September 2015, 22:51:01
DAMN, yuktsi! Why you holding out?!

(Attachment Link)

(Attachment Link)

http://tgr.my/

Acrylic 456? or just feet can't tell from the pics focus.

Yuktsi,
Very nice either way, is the 456 rework just a proto for the Jane where you were testing the shops or is that coming up sometime?

nah. that was the acrylic case i made sometime ago for my friends.
456 rework is the project for fixing the actual dented 456gt

KnivesM · « **Reply #257 on:** Wed, 16 September 2015, 03:11:28 »

Quote from: yuktsi on Wed, 16 September 2015, 02:46:09

Quote from: KnivesM on Tue, 15 September 2015, 23:01:40
Quote from: romevi on Tue, 15 September 2015, 22:51:01
DAMN, yuktsi! Why you holding out?!

(Attachment Link)

(Attachment Link)

http://tgr.my/

Acrylic 456? or just feet can't tell from the pics focus.

Yuktsi,
Very nice either way, is the 456 rework just a proto for the Jane where you were testing the shops or is that coming up sometime?
nah. that was the acrylic case i made sometime ago for my friends.
456 rework is the project for fixing the actual dented 456gt

Oh okay, cool. Yea, it would be a shame to leave such a nice board beat up, look forward to seeing how it turns out.

LXXXIX · « **Reply #258 on:** Thu, 17 September 2015, 13:09:42 »

Quote from: romevi on Tue, 15 September 2015, 22:51:01

DAMN, yuktsi! Why you holding out?!

(Attachment Link)

(Attachment Link)

http://tgr.my/

That top photo looks awfully familiar.

wilarseny · « **Reply #259 on:** Thu, 17 September 2015, 14:42:10 »

Quote from: yuktsi on Wed, 16 September 2015, 02:46:09

Quote from: KnivesM on Tue, 15 September 2015, 23:01:40
Quote from: romevi on Tue, 15 September 2015, 22:51:01
DAMN, yuktsi! Why you holding out?!

(Attachment Link)

(Attachment Link)

http://tgr.my/

Acrylic 456? or just feet can't tell from the pics focus.

Yuktsi,
Very nice either way, is the 456 rework just a proto for the Jane where you were testing the shops or is that coming up sometime?
nah. that was the acrylic case i made sometime ago for my friends.
456 rework is the project for fixing the actual dented 456gt

If you ever decide to sell a board with that acrylic body, I'd buy the **** out of it. Just so you know.

romevi · « **Reply #260 on:** Thu, 17 September 2015, 17:51:53 »

So I'm an idiot and a total newb.

When shopping around for switches, am I looking for PCB-mount or plate-mount? I've ordered my Jane with a plate, but not sure that makes a huge difference...

justnits · « **Reply #261 on:** Thu, 17 September 2015, 20:19:30 »

Quote from: romevi on Thu, 17 September 2015, 17:51:53

So I'm an idiot and a total newb.

When shopping around for switches, am I looking for PCB-mount or plate-mount? I've ordered my Jane with a plate, but not sure that makes a huge difference...

the pcb is using tx87's pcb, which i believe is pcb-mount switch compatible as well. so it doesn't matter if you bought pcb mount or plate mount switches.
some ppl like the idea that using pcb-mount switches with plate gives optimum stability due to the extra 2 legs mounted to the pcb.
i'm not too sure if it's been scientifically proven or not, but i myself don't find any differences between pcb-mount and plate-mount when used it with a plate (acrylic or metal-type).
but one thing for sure, it does gives u some form of 1337 feeling when using pcb mounted switch LOL!

oh, another thing to take note, pcb-mount switch can always be converted to plate-mount switch by clipping off the 2 extra legs.

yuktsi · « **Reply #262 on:** Fri, 18 September 2015, 10:20:52 »

This is the packaging for the board. The kit will be wrapped with a few layers of bubble wrap before it is inserted into the PE foam. The thinnest foam in the box is 35mm. Thank you

p/s: oh yeah, and the keyboard that you saw was just a rejected unit. don't worry.

beehatch · « **Reply #263 on:** Fri, 18 September 2015, 10:26:56 »

Quote from: yuktsi on Fri, 18 September 2015, 10:20:52

This is the packaging for the board. The kit will be wrapped with a few layers of bubble wrap before it is inserted into the PE foam. The thinnest foam in the box is 35mm. Thank you

(Attachment Link)

(Attachment Link)

(Attachment Link)

p/s: oh yeah, and the keyboard that you just saw was just a rejected unit. don't worry.

Packaging looks good! I hope all is going well

romevi · « **Reply #264 on:** Fri, 18 September 2015, 10:29:50 »

Quote from: yuktsi on Fri, 18 September 2015, 10:20:52

This is the packaging for the board. The kit will be wrapped with a few layers of bubble wrap before it is inserted into the PE foam. The thinnest foam in the box is 35mm. Thank you

(Attachment Link)

(Attachment Link)

(Attachment Link)

p/s: oh yeah, and the keyboard that you saw was just a rejected unit. don't worry.

[GB] TGR-Jane custom TKL keyboard (COMPLETED)

yuktsi · « **Reply #265 on:** Fri, 18 September 2015, 10:31:10 »

Quote from: beehatch on Fri, 18 September 2015, 10:26:56

Quote from: yuktsi on Fri, 18 September 2015, 10:20:52
This is the packaging for the board. The kit will be wrapped with a few layers of bubble wrap before it is inserted into the PE foam. The thinnest foam in the box is 35mm. Thank you

(Attachment Link)

(Attachment Link)

(Attachment Link)

p/s: oh yeah, and the keyboard that you just saw was just a rejected unit. don't worry.

Packaging looks good! I hope all is going well

all is well, just a little of cost overrun. aiks

filphil · « **Reply #266 on:** Fri, 18 September 2015, 10:32:25 »

Looks good on the packaging. Thanks for the hard work on that.

Question - Is that the PINK ano?

yuktsi · « **Reply #267 on:** Fri, 18 September 2015, 10:37:23 »

Quote from: filphil on Fri, 18 September 2015, 10:32:25

Looks good on the packaging. Thanks for the hard work on that.

Question - Is that the PINK ano?

answer - yeah. but the pink is not that dark in real life. i hope you don't mind

filphil · « **Reply #268 on:** Fri, 18 September 2015, 10:40:28 »

Quote from: yuktsi on Fri, 18 September 2015, 10:37:23

Quote from: filphil on Fri, 18 September 2015, 10:32:25
Looks good on the packaging. Thanks for the hard work on that.

Question - Is that the PINK ano?
answer - yeah. but the pink is not that dark in real life. i hope you don't mind

No worries on that. I'm just trying to imagine how it would mesh with the all purple on white set from JTKeycaps.

yuktsi · « **Reply #269 on:** Fri, 18 September 2015, 10:48:53 »

Quote from: filphil on Fri, 18 September 2015, 10:40:28

Quote from: yuktsi on Fri, 18 September 2015, 10:37:23
Quote from: filphil on Fri, 18 September 2015, 10:32:25
Looks good on the packaging. Thanks for the hard work on that.

Question - Is that the PINK ano?
answer - yeah. but the pink is not that dark in real life. i hope you don't mind

No worries on that. I'm just trying to imagine how it would mesh with the all purple on white set from JTKeycaps.

Show Image

ahh, you received the set already? I am still yet to receive mine T.T

filphil · « **Reply #270 on:** Fri, 18 September 2015, 10:51:16 »

No that's not mine. That's a pic from KIN's post on kbdlab

yuktsi · « **Reply #271 on:** Sun, 20 September 2015, 10:36:57 »

Those who ordered 84 layout, the keyboard will be shipped out later this week or early next week. Cheers.

quochung1989 · « **Reply #272 on:** Sun, 20 September 2015, 10:38:24 »

Quote from: yuktsi on Sun, 20 September 2015, 10:36:57

Those who ordered 84 layout, the keyboard will be shipped out later this week or early next week. Cheers.

Very great!

filphil · « **Reply #273 on:** Sun, 20 September 2015, 11:30:45 »

Quote from: yuktsi on Sun, 20 September 2015, 10:36:57

Those who ordered 84 layout, the keyboard will be shipped out later this week or early next week. Cheers.

Wow. So quick!

Danboard · « **Reply #274 on:** Sun, 20 September 2015, 12:45:30 »

Wow, much faster than I expected.

yuktsi · « **Reply #275 on:** Sun, 20 September 2015, 12:47:23 »

Quote from: Danboard on Sun, 20 September 2015, 12:45:30

Wow, much faster than I expected.

#mattetitanium

Sed8op8 · « **Reply #276 on:** Sun, 20 September 2015, 12:48:46 »

Bummed I didn't get in on this !!! Great job yutski

HTN47 · « **Reply #277 on:** Sun, 20 September 2015, 13:14:00 »

Are there any extra PCB and plates left to order? I submitted a form last month but haven't receive an invoice...

romevi · « **Reply #278 on:** Sun, 20 September 2015, 13:21:25 »

Quote from: HTN47 on Sun, 20 September 2015, 13:14:00

Are there any extra PCB and plates left to order? I submitted a form last month but haven't receive an invoice...

I don't think they've gone out, but if the boards are shipping already does that mean they're shipping to yuktsi or the owners? Id like to have mine built by Yong, as well as come with extra PCB and plate.

yuktsi, can I order another set of PCB and plate if I need to?

yuktsi · « **Reply #279 on:** Mon, 21 September 2015, 00:51:12 »

Quote from: romevi on Sun, 20 September 2015, 13:21:25

Quote from: HTN47 on Sun, 20 September 2015, 13:14:00
Are there any extra PCB and plates left to order? I submitted a form last month but haven't receive an invoice...
I don't think they've gone out, but if the boards are shipping already does that mean they're shipping to yuktsi or the owners? Id like to have mine built by Yong, as well as come with extra PCB and plate.

yuktsi, can I order another set of PCB and plate if I need to?

I will have a couple of extra pcb and approximate 20 extra plates.
But I am afraid I am not able to sell any of these.
The box was not designed to accommodate anything but the assembled kit. (sorry my mistake again)
Hnnngh. Sorry guys.

yuktsi · « **Reply #280 on:** Mon, 21 September 2015, 00:52:31 »

Quote from: yuktsi on Mon, 21 September 2015, 00:51:12

Quote from: romevi on Sun, 20 September 2015, 13:21:25
Quote from: HTN47 on Sun, 20 September 2015, 13:14:00
Are there any extra PCB and plates left to order? I submitted a form last month but haven't receive an invoice...
I don't think they've gone out, but if the boards are shipping already does that mean they're shipping to yuktsi or the owners? Id like to have mine built by Yong, as well as come with extra PCB and plate.

yuktsi, can I order another set of PCB and plate if I need to?
I will have a couple of extra pcb and approximate 20 extra plates.
But I am afraid I am not able to sell any of these.
The box was not designed to accommodate anything but the assembled kit. (sorry my mistake again)
Hnnngh. Sorry guys.

The board with be shipped to the owner. 86/87 might need to wait a little longer since I am remaking the plate.

uJalled · « **Reply #281 on:** Mon, 21 September 2015, 01:34:15 »

Quote from: yuktsi on Mon, 21 September 2015, 00:52:31

Quote from: yuktsi on Mon, 21 September 2015, 00:51:12
Quote from: romevi on Sun, 20 September 2015, 13:21:25
Quote from: HTN47 on Sun, 20 September 2015, 13:14:00
Are there any extra PCB and plates left to order? I submitted a form last month but haven't receive an invoice...
I don't think they've gone out, but if the boards are shipping already does that mean they're shipping to yuktsi or the owners? Id like to have mine built by Yong, as well as come with extra PCB and plate.

yuktsi, can I order another set of PCB and plate if I need to?
I will have a couple of extra pcb and approximate 20 extra plates.
But I am afraid I am not able to sell any of these.
The box was not designed to accommodate anything but the assembled kit. (sorry my mistake again)
Hnnngh. Sorry guys.
The board with be shipped to the owner. 86/87 might need to wait a little longer since I am remaking the plate.

No worries! it'll be worth the wait i'm sure. is there any word on the acrylic diffuser?

yuktsi · « **Reply #282 on:** Mon, 21 September 2015, 04:43:59 »

Quote from: uJalled on Mon, 21 September 2015, 01:34:15

Quote from: yuktsi on Mon, 21 September 2015, 00:52:31
Quote from: yuktsi on Mon, 21 September 2015, 00:51:12
Quote from: romevi on Sun, 20 September 2015, 13:21:25
Quote from: HTN47 on Sun, 20 September 2015, 13:14:00
Are there any extra PCB and plates left to order? I submitted a form last month but haven't receive an invoice...
I don't think they've gone out, but if the boards are shipping already does that mean they're shipping to yuktsi or the owners? Id like to have mine built by Yong, as well as come with extra PCB and plate.

yuktsi, can I order another set of PCB and plate if I need to?
I am afraid I can't make it, but I will share the drawing later.
I will have a couple of extra pcb and approximate 20 extra plates.
But I am afraid I am not able to sell any of these.
The box was not designed to accommodate anything but the assembled kit. (sorry my mistake again)
Hnnngh. Sorry guys.
The board with be shipped to the owner. 86/87 might need to wait a little longer since I am remaking the plate.

No worries! it'll be worth the wait i'm sure. is there any word on the acrylic diffuser?

romevi · « **Reply #283 on:** Mon, 21 September 2015, 07:38:30 »

Aww... No diffuser?
Is it possible to order that, extra PCB and plate and ship them separately?

Also, is the PCB the TX87?

animated · « **Reply #284 on:** Mon, 21 September 2015, 16:49:18 »

For some reason, if anyone wants to sell their order, please let me know

ntitco1 · « **Reply #285 on:** Tue, 22 September 2015, 13:45:33 »

Quote from: kekkon on Wed, 02 September 2015, 21:37:35

Show Image

Show Image

Yuktsi is going for a business trip, so I'll help him post some ~~update~~ potato pictures.

Do note that the brass is just a sample and not finalize yet.

OMG! Such elegant!!!!!
Do you have any plan for round 2?

justnits · « **Reply #286 on:** Tue, 22 September 2015, 21:34:54 »

Quote from: ntitco1 on Tue, 22 September 2015, 13:45:33

Quote from: kekkon on Wed, 02 September 2015, 21:37:35

Show Image

Show Image

Yuktsi is going for a business trip, so I'll help him post some ~~update~~ potato pictures.

Do note that the brass is just a sample and not finalize yet.

OMG! Such elegant!!!!!
Do you have any plan for round 2?

[out of topic] ntitco1, is that nalacat??

ntitco1 · « **Reply #287 on:** Wed, 23 September 2015, 09:50:42 »

Quote from: justnits on Tue, 22 September 2015, 21:34:54

Quote from: ntitco1 on Tue, 22 September 2015, 13:45:33
Quote from: kekkon on Wed, 02 September 2015, 21:37:35

Show Image

Show Image

Yuktsi is going for a business trip, so I'll help him post some ~~update~~ potato pictures.

Do note that the brass is just a sample and not finalize yet.

OMG! Such elegant!!!!!
Do you have any plan for round 2?

[out of topic] ntitco1, is that nalacat??

Yesss

whentheclouds · « **Reply #288 on:** Thu, 24 September 2015, 01:44:14 »

would a 'NerD2.0 for KMAC' PCB from GON fit in these?

henz · « **Reply #289 on:** Thu, 24 September 2015, 01:59:04 »

Quote from: whentheclouds on Thu, 24 September 2015, 01:44:14

would a 'NerD2.0 for KMAC' PCB from GON fit in these?

should work with normal nerd but with usb connector on top i think. standard a87.

whentheclouds · « **Reply #290 on:** Thu, 24 September 2015, 02:21:34 »

by 'usb connector on top' do you mean the placement should be slightly to the right? cos all connectors are 'on top' aren't they

yuktsi · « **Reply #291 on:** Thu, 24 September 2015, 06:14:48 »

It should since this case is designed based on the standard a87u from wkl

More

whentheclouds · « **Reply #292 on:** Thu, 24 September 2015, 10:38:45 »

i thought they were interchangeable but wanted to make sure. slow day at the brain office

sweet photos btw

HTN47 · « **Reply #293 on:** Fri, 25 September 2015, 01:29:14 »

~~It's coming boys!!! I just got the invoice for shipping! I paid that shiz so quick~~

Whoops false alarm LoL

Wait... I think it's real!! The dream is happening

Someone hold me I'm so lost and excited at the same time

KnivesM · « **Reply #294 on:** Fri, 25 September 2015, 01:41:45 »

Quote from: HTN47 on Fri, 25 September 2015, 01:29:14

~~It's coming boys!!! I just got the invoice for shipping! I paid that shiz so quick~~

Whoops false alarm LoL

I just got one, why false alarm?

HTN47 · « **Reply #295 on:** Fri, 25 September 2015, 01:45:22 »

Quote from: KnivesM on Fri, 25 September 2015, 01:41:45

Quote from: HTN47 on Fri, 25 September 2015, 01:29:14
~~It's coming boys!!! I just got the invoice for shipping! I paid that shiz so quick~~

Whoops false alarm LoL
I just got one, why false alarm?

I thought got it confused with another invoice, but I checked and it's real haha

)

)
All the stress from school starting must be getting to me LoL

KnivesM · « **Reply #296 on:** Fri, 25 September 2015, 02:11:49 »

Quote from: HTN47 on Fri, 25 September 2015, 01:45:22

Quote from: KnivesM on Fri, 25 September 2015, 01:41:45
Quote from: HTN47 on Fri, 25 September 2015, 01:29:14
~~It's coming boys!!! I just got the invoice for shipping! I paid that shiz so quick~~

Whoops false alarm LoL
I just got one, why false alarm?

I thought got it confused with another invoice, but I checked and it's real haha ) )
All the stress from school starting must be getting to me LoL

Yea not being from the same paypal as the original invoice threw me off at first.

filphil · « **Reply #297 on:** Fri, 25 September 2015, 02:39:47 »

Received and paid mine as well

trees · « **Reply #298 on:** Fri, 25 September 2015, 08:10:09 »

If anyone has last minutes thoughts and wants to sell their order, hit me up.

uJalled · « **Reply #299 on:** Fri, 25 September 2015, 08:12:07 »

Wait who is the invoice from/what is it? I got one too but I'm not sure what it is

News:

Author Topic: [GB] TGR-Jane custom TKL keyboard (COMPLETED) (Read 213991 times)