Author Topic: [IC] Star Wars faction key set (Read 37995 times)

danielucf · « **on:** Fri, 14 September 2012, 02:19:35 »

f/64 made some nice looking mock ups for a potential Star Wars faction key set:

The top two are mandalorian raiders in colors from Boba Fett, the second row is Jedi and Sith logos, and the 3rd is Empire and Republic logos. We would potentially have them done at QWERKeys in the same style as their Team Liquid cap that was capable of having a lot more detail to it than the Team Liquid double shot from SP. I believe it is laser infilled J series Row 1 (Esc, Function, Numbers).

At the moment I am unsure of pricing for the J series, but the K series of large spherical keys were close to the following per key:
50 keys $3.25 each
100 keys $2.50 each
200 keys $2.20 each
400 keys $2.05 each

If the J series is similar and we get into the 100 key range I imagine it would cost $15 roughly for a full set of 6 keys. J series might also be cheaper. It may also be possible to do each key individually if people don't want it as a set.

The logos may also need to be simplified to be completed by QWERKeys, or getting dyesubs from imsto. I'm obviously open to opinions to see where the interest check takes us.

Where do you come in? Write what you would be interested in buying, and give alternative suggestions. Maybe only one Mandalorian raider key and make it a set of 5? Maybe there are other factions in Star Wars we want keys for and it should be an 8 key set?

Update 10-15-12est - mock up key pr0n:

i3oilermaker · « **Reply #1 on:** Fri, 14 September 2012, 02:47:43 »

Those mockups have a lot of detail for qwer's process. I would think to achieve that level of detail dyesub may be the only option.

tsangan · « **Reply #2 on:** Fri, 14 September 2012, 03:08:17 »

with QWER you're only going to get outline at best some you might not get anywhere even close to it

danielucf · « **Reply #3 on:** Fri, 14 September 2012, 03:34:33 »

I have seen simplified versions of some of these icons and they still look good and are instantly recognizable. I'm not hooked on using QWERKeys, in fact I would want to utilize what ever would give everyone the best looking key set. This is the reason we do an interest check in the first place. Maybe we don't have enough Star Wars interest to do it, have to wait and see.

Acanthophis · « **Reply #4 on:** Fri, 14 September 2012, 04:42:07 »

I am definitely interested, but those are some very fine details.
I doubt this can be done, not even with dyesubs.
I'm happy to be proven wrong, though.

Mugen · « **Reply #5 on:** Fri, 14 September 2012, 07:35:54 »

I am 100% in for anything Starwars related.

voightkampffme · « **Reply #6 on:** Fri, 14 September 2012, 08:57:52 »

Interested!

OrangeJewce · « **Reply #7 on:** Fri, 14 September 2012, 09:18:46 »

+1!

Cheers,

logomancer · « **Reply #8 on:** Fri, 14 September 2012, 09:56:54 »

I'm in.

reaper · « **Reply #9 on:** Fri, 14 September 2012, 10:03:43 »

Not a big fan of Star Wars but these look cool. In for a set.

IvanIvanovich · « **Reply #10 on:** Fri, 14 September 2012, 11:27:29 »

I would pick one of the Mandolorian keys, don't really need two. Jedi and Rebel would definitely need some simplifying for infilled keys. The Jedi starburst thing in the center looks like it would be a problem, and remove the circle and stars from the Rebel one and it would be fine. If go dyesubs, insane detail is possible and everything is fine then, but some of the color combinations are then impossible.
Definitely interested though. You should just make an order form now and if it has enough interest to move into payment stage half that work is already done.

poopmat · « **Reply #11 on:** Fri, 14 September 2012, 11:36:40 »

Mandolorian keys are awesome
im in for @ lest 2

nebo · « **Reply #12 on:** Fri, 14 September 2012, 11:38:04 »

Interested in the Jedi one but would get all six if a set is the only option. If QWERkeys was used I'd prefer the J series just because the K series does stand out a bit, even if it is on an esc key.

danielucf · « **Reply #13 on:** Fri, 14 September 2012, 11:43:45 »

I ordered the full metal alchemist keys which are imsto dyesubs so I'm quite interested in seeing them in person to see the quality. This may be the route we go if we want to maintain all the detail. Unless people really like engraved and infilled. I think a mandalorian key engraved infilled would be cool, but the others probably dyesub. However as a set I think I would potentially want them all to be identical, but a set of 4 keys (Sith, Jedi, Imperial, Republic) and a Mandalorian key, or double set separate could be good also.

telepete · « **Reply #14 on:** Fri, 14 September 2012, 11:48:20 »

The only thing I like more than imsto keys is Star Wars. 100% in.

DaClownie · « **Reply #15 on:** Fri, 14 September 2012, 13:01:12 »

Very interested.

Kronen · « **Reply #16 on:** Fri, 14 September 2012, 14:23:19 »

I'm tentatively interested... would be moreso if SWTOR wasn't such a complete flop.... Oh well.

rayuki · « **Reply #17 on:** Fri, 14 September 2012, 14:35:21 »

1million % in no matter what it looks like as long as it RESEMBLES the actual logo lol

can we do star trek as well

Findecanor · « **Reply #18 on:** Fri, 14 September 2012, 14:53:41 »

If the pricing does not change too much, I will buy at least three sets.

However, I would suggest that you get a red or blue Rebel Bird on white background instead of the New Republic logo. The bird is classic and more recognized.

BTW, member the_buff made better SVG files of the Imperial cog logo, after I had supplied him with a high-res shot of a screen-used helmet that had an original cog decal. These are more accurate to the original shape than in the mockup.

The_Beast · « **Reply #19 on:** Fri, 14 September 2012, 14:59:07 »

Add more keys and make it a whole f-row set.

Anyways in for at least one set.

f/64 · « **Reply #20 on:** Fri, 14 September 2012, 16:38:30 »

I also made this one just for giggles. I don't think there's any way to get it made though.

IvanIvanovich · « **Reply #21 on:** Fri, 14 September 2012, 17:05:12 »

Not unless you can convince imsto to do an all over print like the spongebobs... but that would look slick with starfield down the sides too.

f/64 · « **Reply #22 on:** Fri, 14 September 2012, 17:07:33 »

I just left the bottoms white so there was some definition, otherwise it'd just be a black square.

f/64 · « **Reply #23 on:** Fri, 14 September 2012, 17:41:49 »

If a whole F row is wanted, we could break down the keys in to some characters.

The C3PO doesn't really match the same style as the R2D2, but just consider them place holders as an example for what the rest of the F row could look like.

JonDBurnett · « **Reply #24 on:** Fri, 14 September 2012, 18:29:34 »

anything star wars related? i'm certainly in for a set

i3oilermaker · « **Reply #25 on:** Fri, 14 September 2012, 18:34:17 »

I'm starting to like the direction this is going

IvanIvanovich · « **Reply #26 on:** Fri, 14 September 2012, 18:56:20 »

If it turns into a zillion key set I will be out. I would only use a couple, not really huge into novelty keys. If you are going to have a bunch, please don't force a set let pick and choose.

Inochi · « **Reply #27 on:** Sat, 15 September 2012, 09:15:02 »

You can count me in for 2/3 sets. The fiance saw these and demanded them.

bnp70kr · « **Reply #28 on:** Sat, 15 September 2012, 09:42:08 »

I'm surely in for a set.

rindorbrot · « **Reply #29 on:** Sat, 15 September 2012, 11:22:24 »

I'm interested as long as the empire key is white on black...

silat · « **Reply #30 on:** Sat, 15 September 2012, 12:28:33 »

Interested.......

daerid · « **Reply #31 on:** Sat, 15 September 2012, 15:51:19 »

Having started the last Star Wars related IC thread that got shut down, I'll take whatever comes out of this thread

noog · « **Reply #32 on:** Sat, 15 September 2012, 19:10:26 »

Interested.

dorkvader · « **Reply #33 on:** Sat, 15 September 2012, 22:57:58 »

I'm interested for obvious reasons. For all those that doubted my interest: I find your lack of faith disturbing.

Can we get an optional Dyesub empire and sith logos? I'm cool if the colours are reversed. The jedi and rebel should be left as thin ABS to further characterize their weakness.

TheBackgammon · « **Reply #34 on:** Sun, 16 September 2012, 01:22:21 »

Interested. Possibly 2 sets minimum.

JSaintS · « **Reply #35 on:** Sun, 16 September 2012, 07:49:00 »

In for a set!

now what exactly do you guys want as a final set? so I can get a clear idea of what I'll get =)

as I love SW I'll get a complete set anyway

palindrome · « **Reply #36 on:** Sun, 16 September 2012, 17:14:17 »

Very much interested.

ZioExcalibur · « **Reply #37 on:** Sun, 16 September 2012, 19:45:33 »

Interested

Scirocco · « **Reply #38 on:** Sun, 16 September 2012, 20:51:14 »

Definitely interested.

Lukasevic · « **Reply #39 on:** Sun, 16 September 2012, 20:54:53 »

I like the mandalorian mock ups, very cool color and idea

JSaintS · « **Reply #40 on:** Mon, 17 September 2012, 13:55:13 »

any ideas if we have enough person interested in it? and when will the orders begin?

Halverson · « **Reply #41 on:** Mon, 17 September 2012, 13:56:27 »

Count me interested!

eon · « **Reply #42 on:** Mon, 17 September 2012, 14:24:28 »

Interested too !

danielucf · « **Reply #43 on:** Mon, 17 September 2012, 15:23:52 »

Well I guess we need to decide if we want to make slightly more simple versions of the logos for engraved infilled from QWERKeys, or dyesubs from imsto. Either way I think we may need to simplify a bit. f/64 made the images so if he can also make SVGs that is another step we need complete before we can start getting quotes.

When it comes to the group buy I'm not sure I want to run one with international shipping again so I'll run it if someone else wants to handle the international portion. Or I'll step aside and let someone else run the group buy. At the moment with two college classes 40+ hour work weeks, and planning a wedding I just don't have the time to do US and International.

danielucf · « **Reply #44 on:** Fri, 21 September 2012, 10:31:18 »

I asked sleabo at QWERKeys about the mandalorian keys and he is going to make mock ups of everything. Here is the pricing structure he gave me for a set of six keys:
50+ @ £12.00 each = $19.51
100+ @ £10.20 each = $16.59
200+ @ £9.60 each = $15.61
400+ @ £9 each = $14.63

These are the rough conversions that Google gave me and may change depending on conversion rates.

JSaintS · « **Reply #45 on:** Fri, 21 September 2012, 11:15:55 »

still in, whatever the price is! =)

Elrobo · « **Reply #46 on:** Fri, 21 September 2012, 12:06:02 »

Interested in a set.

cix · « **Reply #47 on:** Fri, 21 September 2012, 14:09:21 »

Color me interested

rao2100 · « **Reply #48 on:** Sat, 22 September 2012, 03:46:07 »

Interested

Thion · « **Reply #49 on:** Sat, 22 September 2012, 07:33:38 »

Looks good, i'm in.

weenis · « **Reply #50 on:** Sat, 22 September 2012, 10:29:49 »

I'm in, but the chances of this actually happening on are approximately 3720 to 1.

dorkvader · « **Reply #51 on:** Sat, 22 September 2012, 18:41:25 »

Quote from: weenis on Sat, 22 September 2012, 10:29:49

I'm in, but the chances of this actually happening on are approximately 3720 to 1.

Never tell me the odds.
---
You'd be surprised, I think. There are lots of fans on this forum who have already expressed interest.

danielucf · « **Reply #52 on:** Mon, 24 September 2012, 01:12:17 »

Soulpyre sent me this:

OrangeJewce · « **Reply #53 on:** Mon, 24 September 2012, 09:13:09 »

Ouch on the price! Still interested to see what the mockups will end up like.

Cheers,

Soulpyre · « **Reply #54 on:** Mon, 24 September 2012, 10:59:31 »

Yea, that's the skull design on Boba Fett's pauldron.

noog · « **Reply #55 on:** Mon, 24 September 2012, 13:53:19 »

Price sounds good to me. Count me in for a set.

cix · « **Reply #56 on:** Thu, 27 September 2012, 03:19:19 »

color me interested again!

NikoGasm · « **Reply #57 on:** Thu, 27 September 2012, 12:14:08 »

Absolutely interested in these, they're amazing. Gotta love Star Wars.

IPT · « **Reply #58 on:** Thu, 27 September 2012, 12:49:25 »

i'd be interested in these too, but just for "purest", the "republic isn't "Correct" per say, that's the New Republic logo.
Original Republic/Rebel logo has no stars

JSaintS · « **Reply #59 on:** Sun, 30 September 2012, 09:00:55 »

don't we have enough person interested to start a GB?
I just can't wait to put those on my keyboard ^^ I want them

Redndwhite · « **Reply #60 on:** Sun, 30 September 2012, 09:59:05 »

Definitely will be wanting to get 2 sets.

Cobertt · « **Reply #61 on:** Sun, 30 September 2012, 11:37:33 »

Im very interested, anything Star Wars related is +1 for me

piraterice · « **Reply #62 on:** Mon, 01 October 2012, 22:03:20 »

double shot would be the best choice to make those caps

tehvitto · « **Reply #63 on:** Wed, 03 October 2012, 15:01:31 »

Price seems kinda steep, but it's Star Wars so I'm in if this thing happens.

dorkvader · « **Reply #64 on:** Wed, 03 October 2012, 22:00:56 »

Quote from: piraterice on Mon, 01 October 2012, 22:03:20

double shot would be the best choice to make those caps

I think they'd go as dyesub PBt's better, but you're right: Some won't work, unless the colours are changed. I'd go for a PBT empire logo, though.

Quote from: tehvitto on Wed, 03 October 2012, 15:01:31

Price seems kinda steep, but it's Star Wars so I'm in if this thing happens.

Both of you: Welcome to GH!

danielucf · « **Reply #65 on:** Wed, 03 October 2012, 23:04:07 »

Still waiting to see what Sleabo made if he got to tinkering around. The alternative which I'm more likely to go with after seeing the full metal alchemist keys would be thick cherry replica pbt dye subs. If we go for that then our colors are more limited and I have to wait and see what imsto has or can get.

jwaz · « **Reply #66 on:** Wed, 03 October 2012, 23:22:27 »

I only recognize two of those...

Capitalistix · « **Reply #67 on:** Sun, 07 October 2012, 01:19:56 »

I would totally be down for the red on green Mandalorian, the red on white republic, black on white empire and if you made the rebel alliance red on white as well I'd be down for it, otherwise, no thanks

Capitalistix · « **Reply #68 on:** Mon, 08 October 2012, 02:36:12 »

You know what, rethinking it, I like them the way they are and would be down to purchase all 6. I think I could get use out of both mandalorians BTW so I hopw we dont all end up nixing one of them, I like both the color schemes quite a bit!

IE: Put me down for a set!

tadbitnerdy · « **Reply #69 on:** Mon, 08 October 2012, 06:59:06 »

Definitely will want a set, regardless of the profile, if I have the money at the time orders are taken.

JSaintS · « **Reply #70 on:** Fri, 12 October 2012, 17:57:17 »

Hey there! I'm bupping this thread to know if we arez finaly going to make it real or not

let me know please!

danielucf · « **Reply #71 on:** Sun, 14 October 2012, 23:50:44 »

Good news and bad news. Got the following mock up from Sleabo but he said the Jedi and Republic logos didn't come out so nice as we expected because of the intricate detail. Also he has not attempted the Mandalorian key yet.

Key pr0n:

Do take note that these are early mock ups and could be improved upon. We could move forward with these keys for the sith/empire keys, and maybe some PBT Dye subs for Jedi and Republic. Mandalorian keys are still up in the air. I think that is our only option if we wan the white on black, and red on black keys.

How does everyone feel about the mock ups and the potential for this set to be different key profiles? I imagine the QWERKeys could be either J or K series.

reaper · « **Reply #72 on:** Sun, 14 October 2012, 23:51:41 »

Looking good!

Cobertt · « **Reply #73 on:** Mon, 15 October 2012, 00:00:49 »

I'm thinking if we did a different image for the rebel symbol it would be better, maybe one without the dots around it, like this http://images.wikia.com/starwars/images/7/71/Redstarbird.svg but maybe with a circle around it. just my 2 cents.

danielucf · « **Reply #74 on:** Mon, 15 October 2012, 00:02:52 »

Quote from: Cobertt on Mon, 15 October 2012, 00:00:49

I'm thinking if we did a different image for the rebel symbol it would be better, maybe one without the dots around it, like this http://images.wikia.com/starwars/images/7/71/Redstarbird.svg but maybe with a circle around it. just my 2 cents.

I would not be opposed but what about those Jedi fans? Will they be happy with just a Republic logo?

TheQsanity · « **Reply #75 on:** Mon, 15 October 2012, 01:47:01 »

Anyone know where to get a TL keycap? How long ago was that GB?

danielucf · « **Reply #76 on:** Mon, 15 October 2012, 02:21:16 »

If you are talking about the QWERKeys TL keycap there was never a group buy. He just had them for sale for awhile then they disappeared off the site and I still have not found out why, but I suspect it was requested by team liquid. I have 3, and I gave one away, they look nicer than the ones from signature plastics.

TheQsanity · « **Reply #77 on:** Mon, 15 October 2012, 02:24:54 »

sounds like it will be kind of hard for me to get one.

JSaintS · « **Reply #78 on:** Mon, 15 October 2012, 06:33:24 »

Quote from: danielucf on Sun, 14 October 2012, 23:50:44

Good news and bad news. Got the following mock up from Sleabo but he said the Jedi and Republic logos didn't come out so nice as we expected because of the intricate detail. Also he has not attempted the Mandalorian key yet.

Key pr0n:
Show Image

Do take note that these are early mock ups and could be improved upon. We could move forward with these keys for the sith/empire keys, and maybe some PBT Dye subs for Jedi and Republic. Mandalorian keys are still up in the air. I think that is our only option if we wan the white on black, and red on black keys.

How does everyone feel about the mock ups and the potential for this set to be different key profiles? I imagine the QWERKeys could be either J or K series.

I love them! I would definitly be in for a set looking like that :)

Cobertt · « **Reply #79 on:** Mon, 15 October 2012, 07:39:17 »

Quote from: danielucf on Mon, 15 October 2012, 00:02:52

Quote from: Cobertt on Mon, 15 October 2012, 00:00:49
I'm thinking if we did a different image for the rebel symbol it would be better, maybe one without the dots around it, like this http://images.wikia.com/starwars/images/7/71/Redstarbird.svg but maybe with a circle around it. just my 2 cents.
I would not be opposed but what about those Jedi fans? Will they be happy with just a Republic logo?

I think that the jedi logo has to small of design elements to be done at such a small scale.

weasle425 · « **Reply #80 on:** Mon, 15 October 2012, 08:51:24 »

Those look awesome! I am very interesting in a set

IPT · « **Reply #81 on:** Mon, 15 October 2012, 10:55:35 »

again just being picky danielucf, but the imperial white/black cap isn't centered correctly.
the point should be in the middle, not the curve
like this:

Other than that, looks great and i'd love to order!

And i'd say if the new republic logo's too detailed, just stick with the normal rebel logo

IvanIvanovich · « **Reply #82 on:** Mon, 15 October 2012, 13:48:29 »

I'd be fine with a 3 cap set, or whatever the case may be. But only still interested if on J series. I couldn't stand those spherical keys.
Maybe try the more basic rebel logo? Seems like it shouldn't be as much of a problem.

danielucf · « **Reply #83 on:** Mon, 15 October 2012, 14:15:17 »

Quote from: lysol on Mon, 15 October 2012, 13:48:29

I'd be fine with a 3 cap set, or whatever the case may be. But only still interested if on J series. I couldn't stand those spherical keys.
Maybe try the more basic rebel logo? Seems like it shouldn't be as much of a problem.

I agree, I don't want the enormous keys either so it would be cherry profile Function/Number row.

rindorbrot · « **Reply #84 on:** Mon, 15 October 2012, 15:00:13 »

Sith and Imperial, everything I need

Now take my money please

esoomenona · « **Reply #85 on:** Mon, 15 October 2012, 15:05:20 »

IvanIvanovich · « **Reply #86 on:** Mon, 15 October 2012, 16:07:41 »

Great, I was worried you might pick those other ones for a minute. I think I really would just prefer the smaller Empire / Sith / Mandalorian 3 key set if thats possible. Who needs those wussy Jedi / Rebel keys anyway?

Findecanor · « **Reply #87 on:** Wed, 24 October 2012, 17:04:11 »

Quote from: projectD on Mon, 15 October 2012, 10:55:35

again just being picky danielucf, but the imperial white/black cap isn't centered correctly.
the point should be in the middle, not the curve

Yes. While the image that I posted had accurate dimensions, it should have been rotated 30°. I'm so sorry about that.

I have attached a corrected SVG. This contains three layers. The layer named "White" is for printing white on a dark background. The layer named "Black" is for printing black on a light background but does not have any black ring around the rest. The layer "Background" is just there to make the white layer visible.

JmactheAttack · « **Reply #88 on:** Mon, 29 October 2012, 17:33:26 »

I would love to buy a set assuming they are doubleshot, I'll pass otherwise.

JSaintS · « **Reply #89 on:** Mon, 05 November 2012, 01:35:16 »

hello everyone!

this IC has been dead for a week now, so I was just wanting to know : is it going to occur or not? as a fan of Star Wars I really want those, so just let me know

thanks

IvanIvanovich · « **Reply #90 on:** Mon, 05 November 2012, 12:24:32 »

Wondering the same. Even if it is just for the 2 that had successful prototype made, still interested in something.

esoomenona · « **Reply #91 on:** Mon, 05 November 2012, 12:27:15 »

danielucf · « **Reply #92 on:** Tue, 06 November 2012, 16:51:34 »

Quote from: eNrageDSainT on Mon, 05 November 2012, 01:35:16

hello everyone!

this IC has been dead for a week now, so I was just wanting to know : is it going to occur or not? as a fan of Star Wars I really want those, so just let me know

thanks

I'm still waiting on sleabo to finish the other prototypes he said he would make, and to potentially fix the logo that was slightly rotated. If it all looks good I can make the group buy thread. If anyone wants to make simplified jedi and republic logos that would help.

Redndwhite · « **Reply #93 on:** Wed, 07 November 2012, 00:44:03 »

Guess this would also require a Disney 'D' as well, eh?

IvanIvanovich · « **Reply #94 on:** Wed, 07 November 2012, 11:54:40 »

razorsharpgears · « **Reply #95 on:** Mon, 03 December 2012, 22:38:19 »

Interested !

vultures · « **Reply #96 on:** Wed, 05 December 2012, 19:55:14 »

Interested...i hope this kicks into production for GB

gimpster · « **Reply #97 on:** Mon, 10 December 2012, 17:13:02 »

Definitely interested.

daerid · « **Reply #98 on:** Sat, 15 December 2012, 00:52:17 »

been trying to get these for a year and a half now

Alboreo · « **Reply #99 on:** Sun, 16 December 2012, 18:30:47 »

Certainly interested.

simkev · « **Reply #100 on:** Wed, 02 January 2013, 09:16:47 »

This is really interesting

)
But, it should contain the emblems of the two main factions of the prequel trilogy of Star Wars films. The logo for the Galactic Republic and CIS.
Aand, the logo you are using for the Rebel Alliance is actually the logo for The New Republic. Ditch the stars and the circle and you will have the correct logo.

r3dx · « **Reply #101 on:** Wed, 02 January 2013, 09:31:05 »

Definitely interested in picking up a set.

FabsSpeed · « **Reply #102 on:** Wed, 09 January 2013, 00:20:37 »

I am in for a set

JmactheAttack · « **Reply #103 on:** Sat, 12 January 2013, 19:01:48 »

I am in for a set if they're doubleshot and/or engraved. I don't find diesub keys to be bold or bright enough and obviously couldn't be on black keys.

stephmasta · « **Reply #104 on:** Wed, 16 January 2013, 13:38:20 »

In for this.

danielucf · « **Reply #105 on:** Thu, 17 January 2013, 12:48:38 »

After the Toxic set is complete I'll try and get back in touch with Dan at QWERKEYs and see if he can get the rest of the test keys made. The sith and empire logos looked pretty good, but I would still like to see an attempt at a jedi, republic, and mandalorian logos. One of the things I'm not too fond of with QWERKEYs is exclusivity. If we use them for these keys for our group buy then eventually the logos will be made again and sold on the QWERKEYs web site. You don't see Signature Plastics selling custom legend keys for profit after group buys.....

For the detailed logos though, dye sublimation may be the only way.

TheQsanity · « **Reply #106 on:** Thu, 17 January 2013, 16:13:21 »

Amen.

sym007 · « **Reply #107 on:** Wed, 15 January 2014, 15:43:19 »

So....what is up with the status of this set?

SpAmRaY · « **Reply #108 on:** Wed, 15 January 2014, 15:44:02 »

Quote from: sym007 on Wed, 15 January 2014, 15:43:19

So....what is up with the status of this set?

Well....yours was the first post in almost a year....so......

genkidama · « **Reply #109 on:** Wed, 15 January 2014, 17:18:17 »

Sad to see that this IC kinda died.
Maybe danielucf can revive this IC as there was a lot of interest last year and I'm also interested and only realized now that this was a one year old thread.

Pacifist · « **Reply #110 on:** Wed, 15 January 2014, 17:23:27 »

somebody get this **** started

RomeoActual · « **Reply #111 on:** Mon, 10 February 2014, 23:41:51 »

Necropost!

Is this still a thing? I'd buy it.

IvanIvanovich · « **Reply #112 on:** Tue, 11 February 2014, 20:23:56 »

I did the main original trio as dyesub. I will probably do them again, they come out nice and were pretty popular.

ImBZppl · « **Reply #113 on:** Tue, 08 April 2014, 15:19:34 »

I would like to purchase a set as well, trying to get my friends into this stuff and this might just peak their interest. A double shot set for their backlit boards would be nice.

Edit: typo

Pacifist · « **Reply #114 on:** Tue, 08 April 2014, 15:21:37 »

stop necroing this thread and making me want it

genkidama · « **Reply #115 on:** Wed, 09 April 2014, 06:27:34 »

Quote from: Pacifist on Tue, 08 April 2014, 15:21:37

stop necroing this thread and making me want it

But I also want them so much. Maybe IvanIvanovich can say something about it as he seemed to have the will to make them :] Maybe a new IC thread should be opened up to see clearly who is interested in this kind of set.

Cheers

Findecanor · « **Reply #116 on:** Wed, 09 April 2014, 07:12:41 »

Quote from: IvanIvanovich on Tue, 11 February 2014, 20:23:56

I did the main original trio as dyesub. I will probably do them again, they come out nice and were pretty popular.

I bought a bunch of those. But what I really want is the Imperial cog in white on black as a modifier.

heedpantsnow · « **Reply #117 on:** Tue, 27 May 2014, 10:17:09 »

Hehe, necro. I like this set. I would love to see it made.

strict · « **Reply #118 on:** Tue, 27 May 2014, 10:34:43 »

My wife would kill me if I bought *more* keys but if this set were produced theres no way I could pass them up. I would most likely order all 6 keys. I'm really digging the Mandalorian and Sith keys

111Blueangel911 · « **Reply #119 on:** Thu, 29 May 2014, 18:38:23 »

Looks great

daerid · « **Reply #120 on:** Sun, 01 June 2014, 12:02:06 »

I must have them

iamtootallforthis · « **Reply #121 on:** Wed, 11 June 2014, 18:04:59 »

I want them

vultures · « **Reply #122 on:** Fri, 13 June 2014, 04:46:08 »

Is this going to kick in?

News:

Author Topic: [IC] Star Wars faction key set (Read 37995 times)