Post by: kin25 on Sat, 15 April 2017, 15:01:43
They are in the anodizing factory now.
## 5 colors.
Black, Titan Grey, Silver, Red and Blue.
* Top, Bottom, Plate, Weight and PCB are finished.
* Bag Prototype : 23 April
* Acrylic Diffuser : 28 April
* Metal Gasket : 8 May
Round 1 is finished.
R1 : #1~#50, shipping day(15~30 May)
Round 2 is alive
Preorder Form : https://goo.gl/forms/5PgVAejIaFvWASwl2 (https://goo.gl/forms/5PgVAejIaFvWASwl2)
R2 : #51~ , shipping day(1~15 July)
Differences of V2
(1) NCS indicators holes
(2) Bottom become 2mm thinner than V1 for diffuser
(3) New smt presoldered PCB
(4) Bottom 3mm weight bar
(5) 8 pieces acrylic diffuser and metal gasket
(6) 4.1kg~4.3kg
The price (+4% paypal fee)
(1) Basic Case : ($280) : Top, Bottom, SS 3T weight, 3T acrylic diffuser
(2) Plate(ANSI, ISO, Univesal) : Brass($55), SS($35), Silver Alu($35)
(3) Weight : Changing Brass(+$44)
(4) PCB : $60
(5) Adding 8 pieces Metal Gasket : SS($20), Gold-Plated SS($20)
(6) Bag : $30
Shipping cost
(1) USA : $80
(2) Europe, Canada : $70
(3) Australia : $65
(4) Asia $50
Two Craftmen's Assembling Service
** All parts and service : $130
(1) Vintage black, brown and white / Lub
(2) 52g, 57g, 64g Spring / Lub
(3) Switch Gap Film
(4) Stabilizers / Lub
(5) 2*3*4 LED / cut
(6) Soldering
(7) Keys Testing
## Round 1 Shipping day : 15 May~ 30 May
## Round 1 Shipping day : 1 July~15 July
# About diffuser and gasket (these parts will be made until May)
you can use diffuser and gasket parts together
acrylic, SS, gold SS
[attachimg=9]
[attachimg=12]
[attachimg=14]
[attachimg=15]
[attachimg=16]
[attachimg=17]
[attachimg=18]
# About bag (sample will be made until May)
EVA(outer), EPE(inner 3cm Foam), Handle
[attachimg=10]
[attachimg=11]
[attachimg=13]
##################### Look Grey Prototype ######################
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
[attachimg=7]
[attachimg=8]
Post by: boo on Thu, 20 April 2017, 21:40:37
Sent from my iPhone using Tapatalk
Post by: Slash Emperor on Thu, 20 April 2017, 22:04:40
Sent from my LG-US996 using Tapatalk
Post by: Photoelectric on Fri, 21 April 2017, 12:29:51
As always, the Caveat Emptor (https://geekhack.org/index.php?topic=36773.0) applies to any group buys / preorders on this site.
Post by: TelFiRE on Fri, 21 April 2017, 12:32:23
Post by: kawasaki161 on Fri, 21 April 2017, 12:37:43
The PCB doesn't support RGB ( for custom per ley color) lighting right?Correct, RGB for the diffuser yes, but the in-switch LEDs only support normal solid color 2 pin LEDs
Post by: TelFiRE on Fri, 21 April 2017, 12:51:29
Great looking board! Would probably be in if I didn't just get converted away from numpads
Post by: kin25 on Fri, 21 April 2017, 13:40:06
All invoices of TX1800v2 R1 and TXCP R2 were sent.
(if you received an invoice, You are in Round 1)
PLZ Fill out Round 2 preorder form.
Post by: Petch on Fri, 21 April 2017, 13:46:26
Post by: romevi on Fri, 21 April 2017, 13:46:52
Post by: zoomwalt on Fri, 21 April 2017, 14:31:39
Post by: Petch on Fri, 21 April 2017, 14:39:34
Can someone give detail regarding what the gaskets are?
The RGB diffuser that's sandwiches between the 2 aluminum pieces is made up of 8 parts, the gaskets can replace any or all of those parts. For example, you could have the metal gaskets in just the corners, or replace all the diffuser with the gaskets if you don't like the lighting
Post by: SICAR187 on Fri, 21 April 2017, 15:00:57
The moderation team has discussed kin25's recent history of selling custom keyboard kits on geekhack, and his recent track record of sales of premade kits appears to have been good. Combined with this preorder thread being for kits that are already partially completed, we decided that kin25 should get a second chance to prove that he has learned from his past experience (when he ran into a lot of trouble with his first group buy) and will use it to be significantly more successful this time around.
As always, the Caveat Emptor (https://geekhack.org/index.php?topic=36773.0) applies to any group buys / preorders on this site.
I don't know the details of the 1st GB, but I purchased a TX-87 from Kin approximately 1 month ago. I spoke with Kin on the TeleGram app, and had my KB in hand less than a week after our first comm. Mr. Kin was PHENOMENAL from the start, he was very friendly throughout the whole experience, he answered all my questions, sent me tons of pictures. The KB arrived in pristine condition (packaging was outstanding), and was very surprised all gifts included with my order. I couldn't be happier with my experience with Mr. Kin.
Post by: romevi on Fri, 21 April 2017, 15:20:22
Can someone give detail regarding what the gaskets are?
The RGB diffuser that's sandwiches between the 2 aluminum pieces is made up of 8 parts, the gaskets can replace any or all of those parts. For example, you could have the metal gaskets in just the corners, or replace all the diffuser with the gaskets if you don't like the lighting
Yeah, from my understanding the v2 needs either the diffuser or gasket; can't be used without either.
Post by: dubious on Fri, 21 April 2017, 17:06:02
Post by: autobot on Fri, 21 April 2017, 17:14:28
Post by: Petch on Fri, 21 April 2017, 17:19:15
Agreed, I've been in contact on telegram as well and he's been very helpfulThe moderation team has discussed kin25's recent history of selling custom keyboard kits on geekhack, and his recent track record of sales of premade kits appears to have been good. Combined with this preorder thread being for kits that are already partially completed, we decided that kin25 should get a second chance to prove that he has learned from his past experience (when he ran into a lot of trouble with his first group buy) and will use it to be significantly more successful this time around.
As always, the Caveat Emptor (https://geekhack.org/index.php?topic=36773.0) applies to any group buys / preorders on this site.
I don't know the details of the 1st GB, but I purchased a TX-87 from Kin approximately 1 month ago. I spoke with Kin on the TeleGram app, and had my KB in hand less than a week after our first comm. Mr. Kin was PHENOMENAL from the start, he was very friendly throughout the whole experience, he answered all my questions, sent me tons of pictures. The KB arrived in pristine condition (packaging was outstanding), and was very surprised all gifts included with my order. I couldn't be happier with my experience with Mr. Kin.
Silly question: Does the board fit inside a Cherry 1800 case?IIRC, no
Post by: kawasaki161 on Fri, 21 April 2017, 17:50:25
Silly question: Does the board fit inside a Cherry 1800 case?
I think it does, but I also think you'd be better off with waiting for a definitive answer from Kin25
Post by: punkpc on Fri, 21 April 2017, 19:59:55
Silly question: Does the board fit inside a Cherry 1800 case?
I think it does, but I also think you'd be better off with waiting for a definitive answer from Kin25
I am also wondering the same question. As I am looking for a PCB for my Dolch G80-1813. Is this PCB like the Leeku and do you have pictures on the PCB?
Post by: kin25 on Fri, 21 April 2017, 20:03:30
Silly question: Does the board fit inside a Cherry 1800 case?
You can use this pcb in cherry housing.
Bottom rgbleds contact with bottom case of cherry housing.
You have to choose one method.
1) desoldering some rgbleds.
2) cutting plastic housing. (Not difficult)
Post by: kin25 on Fri, 21 April 2017, 20:07:17
[attachimg=1]
You can not use rgbleds lighting
Post by: kin25 on Fri, 21 April 2017, 20:12:44
Can someone give detail regarding what the gaskets are?
The RGB diffuser that's sandwiches between the 2 aluminum pieces is made up of 8 parts, the gaskets can replace any or all of those parts. For example, you could have the metal gaskets in just the corners, or replace all the diffuser with the gaskets if you don't like the lighting
Yeah, from my understanding the v2 needs either the diffuser or gasket; can't be used without either.
Correct.
Bottom case thickness becomes 2mm thinner than V1
Post by: Acerk on Fri, 21 April 2017, 20:27:11
- Is the PCB a Leeku MX1800 or something else?
- Is the layout customizable?
- Would it be possible to get a darker colored plate?
- If I want to solder it myself, aside from switches and stabilizers, what else would I need minimum?
- Is it possible to have stepped caps-lock?
I may also be interested in a PCB for a Cherry G80-1800 case.
Post by: kin25 on Fri, 21 April 2017, 20:35:58
- Is the PCB a Leeku MX1800 or something else?
- Is the layout customizable?
- Would it be possible to get a darker colored plate?
- If I want to solder it myself, aside from switches and stabilizers, what else would I need minimum?
Post by: Acerk on Fri, 21 April 2017, 21:02:29
Leeku designed this pcb
My bad. I didn't look close enough at the image. It all sounds great. Thank you!
Leds?
I don't need leds for the switches. Would I need to get leds for the diffuser or is that part of everything?
Post by: kin25 on Fri, 21 April 2017, 21:14:05
Leeku designed this pcb
My bad. I didn't look close enough at the image. It all sounds great. Thank you!Leds?
I don't need leds for the switches. Would I need to get leds for the diffuser or is that part of everything?
No. You don't need.
Post by: mindxthinker on Fri, 21 April 2017, 21:25:04
-MiND-
Post by: kin25 on Fri, 21 April 2017, 22:56:40
TX1800은 사랑입니다.
-MiND-
마인드님 여기까지 출장오셨군요.
이번 v2는 전세계 통틀어서 마인드님이 주문수량 1위 입니다.
Post by: popkorn62 on Sat, 22 April 2017, 00:41:02
Post by: rondg on Sat, 22 April 2017, 00:55:31
This picture is PCB, after desoldering contacted rgbleds.
(Attachment Link)
You can not use rgbleds lighting
Is this the version 1.3? If not, what are the differences?
Post by: maximm on Sat, 22 April 2017, 01:25:13
Post by: kin25 on Sat, 22 April 2017, 01:36:02
Is it possible to buy pre-modded vintage switches, but with no soldering or stabs? How much would that cost? I love to solder my own switches :)
Sorry.. It is not possible to buy switches.
Plz understand my policy.
Post by: kin25 on Sat, 22 April 2017, 01:38:03
This picture is PCB, after desoldering contacted rgbleds.
(Attachment Link)
You can not use rgbleds lighting
Is this the version 1.3? If not, what are the differences?
New pcb is smt presoldered pcb.
I disoldered some rgbleds for cherry original housimg.
Post by: Vloshko on Sat, 22 April 2017, 02:39:43
Post by: ricyuyc on Sat, 22 April 2017, 03:38:59
Post by: iichigoz on Sat, 22 April 2017, 10:15:20
Post by: mindxthinker on Sat, 22 April 2017, 10:19:47
May I know what is changing of brass weight?
It means that you can upgrade SS 3T weight to Brass weight
Post by: kin25 on Sat, 22 April 2017, 10:20:56
May I know what is changing of brass weight?
Basically SS weight is provided.
If you want to change SS to brass weight, you should choose this option.
Post by: iichigoz on Sat, 22 April 2017, 10:23:24
Basically SS weight is provided.
If you want to change SS to brass weight, you should choose this option.
Oh so if I choose the brass plate I need not have this option right? What advantages does a brass plate have over the SS and aluminium? Sorry for all the noob questions. Just started off buying these custom boards. TIA!
Post by: kin25 on Sat, 22 April 2017, 10:26:39
Basically SS weight is provided.
If you want to change SS to brass weight, you should choose this option.
Oh so if I choose the brass plate I need not have this option right? What advantages does a brass plate have over the SS and aluminium? Sorry for all the noob questions. Just started off buying these custom boards. TIA!
Brass weight looks good. It is all.
Brass plate is heavier and softer.
Less stress for fingers is merit.
Post by: iichigoz on Sat, 22 April 2017, 11:25:40
Post by: m1kehonch0 on Sat, 22 April 2017, 16:38:52
Silly question: Does the board fit inside a Cherry 1800 case?If you mean the PCB, yes it does.
Sent from my iPhone using Tapatalk
Post by: m1kehonch0 on Sat, 22 April 2017, 16:42:24
Sent from my iPhone using Tapatalk
Post by: Petch on Sat, 22 April 2017, 16:47:09
Post by: kawasaki161 on Sat, 22 April 2017, 18:16:05
Can the RGB brightness be adjusted?
Yes.
Post by: buzzking00 on Sat, 22 April 2017, 18:23:11
Post by: Acerk on Sat, 22 April 2017, 18:27:51
Post by: Petch on Sat, 22 April 2017, 20:41:45
Thanks, any guides on programming it?Can the RGB brightness be adjusted?
Yes.
Post by: poolside on Sun, 23 April 2017, 03:51:50
Where can I find example pictures of the case colors available?
Have a look here for black, silver and red:
https://geekhack.org/index.php?topic=86076.msg2408197#msg2408197
Post by: kawasaki161 on Sun, 23 April 2017, 04:58:43
https://geekhack.org/index.php?topic=83950Thanks, any guides on programming it?Can the RGB brightness be adjusted?
Yes.
Post by: ns90 on Sun, 23 April 2017, 15:44:48
Post by: alienman82 on Sun, 23 April 2017, 16:13:42
Post by: duynguyenle on Sun, 23 April 2017, 20:27:20
Shipping cost
(1) USA : $80
(2) Europe, Canada : $70
(3) Australia : $65
(4) Asia $50
Cheaper to ship to Canada than USA?? Makes no sense.
Trumptax on Asian products :P
Post by: alienman82 on Sun, 23 April 2017, 20:52:19
Post by: sungwon on Sun, 23 April 2017, 21:04:53
Shipping cost
(1) USA : $80
(2) Europe, Canada : $70
(3) Australia : $65
(4) Asia $50
Cheaper to ship to Canada than USA?? Makes no sense.
http://imgur.com/a/qCSZ6
it doesn't make sense, but it makes sense in South Korea LOL
Post by: alienman82 on Sun, 23 April 2017, 21:14:26
Post by: Slash Emperor on Mon, 24 April 2017, 09:45:59
Post by: Prankk on Mon, 24 April 2017, 15:12:50
Post by: senortighto on Mon, 24 April 2017, 21:37:00
Post by: zoomwalt on Tue, 25 April 2017, 01:15:50
Post by: poolside on Tue, 25 April 2017, 01:18:51
Is it possible to have this assembled with SIP sockets for LEDs?
Can we request SIP sockets for LEDs with the TX-CP R2 assembling service?
Also, which LED colors are available?
Sip sockets are available.
White.
Warm white
Red
Blue
Green
Ice blue
Pink
Post by: zoomwalt on Tue, 25 April 2017, 01:20:29
Is it possible to have this assembled with SIP sockets for LEDs?Can we request SIP sockets for LEDs with the TX-CP R2 assembling service?
Also, which LED colors are available?
Thanks - sorry I missed that.
Sip sockets are available.
White.
Warm white
Red
Blue
Green
Ice blue
Pink
Post by: IAmPyhrra on Tue, 25 April 2017, 20:28:37
If I were to order a set, what would I need to order (just enough/necessary) to build the keyboard itself?
Post by: Petch on Tue, 25 April 2017, 20:47:29
Hello,
If I were to order a set, what would I need to order (just enough/necessary) to build the keyboard itself?
Quote
(1) Basic Case : ($280) : Top, Bottom, SS 3T weight, 3T acrylic diffuser
(2) Plate(ANSI, ISO, Univesal) :Brass($55), SS($35),Silver Alu($35)
(3) Weight :Changing Brass(+$44)
(4) PCB : $60(5) Adding 8 pieces Metal Gasket : SS($20), Gold-Plated SS($20)
(6) Bag : $30
In addition, you will need some switches and keycaps, as well as the shipping cost of the keyboard. If you really wanted you could forgo the PCB and handwire the switches to a teensy, saving $40, but I wouldn't recommend it. You'd also lose the RGB lighting that's presoldered on the PCB
There are currently some group buys going on for some cheap switches, depending on what you want...
For keycaps, you will want a set that supports 1800 layout, which will come at a premium
Post by: IAmPyhrra on Tue, 25 April 2017, 21:07:14
Hello,
If I were to order a set, what would I need to order (just enough/necessary) to build the keyboard itself?Quote(1) Basic Case : ($280) : Top, Bottom, SS 3T weight, 3T acrylic diffuser
(2) Plate(ANSI, ISO, Univesal) :Brass($55), SS($35),Silver Alu($35)
(3) Weight :Changing Brass(+$44)
(4) PCB : $60(5) Adding 8 pieces Metal Gasket : SS($20), Gold-Plated SS($20)
(6) Bag : $30
In addition, you will need some switches and keycaps, as well as the shipping cost of the keyboard. If you really wanted you could forgo the PCB and handwire the switches to a teensy, saving $40, but I wouldn't recommend it. You'd also lose the RGB lighting that's presoldered on the PCB
There are currently some group buys going on for some cheap switches, depending on what you want...
For keycaps, you will want a set that supports 1800 layout, which will come at a premium
Awesome, thanks Petch!
I will submit an order.
Post by: poolside on Wed, 26 April 2017, 02:04:14
Post by: kin25 on Wed, 26 April 2017, 02:57:49
Hi Kin, I messaged you about adding the assembling service to my R1 order. Not sure if the invoice can be updated before today's payment deadline, though.
I will send an invoice again at night.
Post by: poolside on Wed, 26 April 2017, 06:47:37
Hi Kin, I messaged you about adding the assembling service to my R1 order. Not sure if the invoice can be updated before today's payment deadline, though.
I will send an invoice again at night.
Great, thanks. :)
I was about to pay the old invoice in order not to miss the deadline. I will wait for the updated one then.
Post by: Prankk on Wed, 26 April 2017, 09:27:02
Post by: JaccoW on Wed, 26 April 2017, 09:37:51
How about the plate? I know the previous GB did have one for use in Cherry 1800 cases.Silly question: Does the board fit inside a Cherry 1800 case?If you mean the PCB, yes it does.
Post by: duynguyenle on Wed, 26 April 2017, 09:42:01
How about the plate? I know the previous GB did have one for use in Cherry 1800 cases.Silly question: Does the board fit inside a Cherry 1800 case?If you mean the PCB, yes it does.
TX1800 plate is bespoke. But if you really want to convert your Cherry 1800 cases, kin does offer MX 1800 plates for use with OG G80 cases. You will need to PM him and ask for those as extras
Post by: PollandAkuma on Wed, 26 April 2017, 13:42:57
Post by: poolside on Wed, 26 April 2017, 17:15:11
http://kbdlab.co.kr/index.php?document_srl=4335223&mid=board_Lsno50
I can't read what is written alongisde the pictures, however.
Post by: kin25 on Wed, 26 April 2017, 19:27:02
I have just stumbled upon what looks like an acrylic plate bearing Kin's TX-1800 logo over on kbdlab:
http://kbdlab.co.kr/index.php?document_srl=4335223&mid=board_Lsno50
I can't read what is written alongisde the pictures, however.
LZ made it for using on his tx1800v2.
It is not official release.
He gave it to his friend as a gift.
Post by: kin25 on Wed, 26 April 2017, 19:29:09
How about the plate? I know the previous GB did have one for use in Cherry 1800 cases.Silly question: Does the board fit inside a Cherry 1800 case?If you mean the PCB, yes it does.
I ordered to make some 1800layout plate for G80-1800.
Post by: IAmPyhrra on Wed, 26 April 2017, 23:33:37
Sent you a pm to update my order.
Read it when you got the time!
Thanks
Post by: kin25 on Thu, 27 April 2017, 01:06:27
Hey Kin,
Sent you a pm to update my order.
Read it when you got the time!
Thanks
Thanks for letting me know.
I sent an invoice again.
Post by: kin25 on Thu, 27 April 2017, 11:15:41
Post by: Petch on Thu, 27 April 2017, 13:54:07
Diffuser pics updated..Looks good
Is that the Grey anodising with SS gasket? I ordered gold but I quite like the SS now.
Post by: poolside on Thu, 27 April 2017, 18:20:15
I have just stumbled upon what looks like an acrylic plate bearing Kin's TX-1800 logo over on kbdlab:
http://kbdlab.co.kr/index.php?document_srl=4335223&mid=board_Lsno50
I can't read what is written alongisde the pictures, however.
LZ made it for using on his tx1800v2.
It is not official release.
He gave it to his friend as a gift.
Thanks for the explanation. That's a nice plate.
Diffuser pics updated..Looks good
Is that the Grey anodising with SS gasket? I ordered gold but I quite like the SS now.
The gray looks very nice. I think I made the right choice.
If more colors had been available, I would not have been able to pick one. ;D
Post by: kjh2696 on Sat, 29 April 2017, 01:35:04
Post by: poolside on Sat, 29 April 2017, 05:25:48
Hi Kin, I messaged you about adding the assembling service to my R1 order. Not sure if the invoice can be updated before today's payment deadline, though.
I will send an invoice again at night.
I am getting a little bit nervous as I still have not paid for my TX-1800 R1. ;D
Post by: richard912 on Sat, 29 April 2017, 09:23:07
Diffuser pics updated..Looks awesome!! Hope to see this design meta in a TKL version soon
Post by: duynguyenle on Sat, 29 April 2017, 10:51:06
Post by: kin25 on Sat, 29 April 2017, 11:26:51
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
I have to check something and fix it a little.
Post by: Petch on Sat, 29 April 2017, 12:02:11
Post by: Delirious on Sat, 29 April 2017, 12:16:03
Oh that looks exactly how I'd hoped! Sleeves are next to useless.
sleeve ≤ 4lbs weight
hardcase w/ foam ≥ 4lbs weight
Post by: Butter on Sat, 29 April 2017, 15:27:13
Sent from my iPhone using Tapatalk
Post by: eddible on Mon, 01 May 2017, 10:05:56
Is it too late to add a bag?I'll second this, I didn't realise quite the bag was a proper holdall!
Post by: KetchyKech on Mon, 01 May 2017, 10:12:10
Bag sample are made.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
I have to check something and fix it a little.
This is looks awesome. Very pleased that I went in for a bag as well--- Great work!!
Post by: onmybikedrunk on Mon, 01 May 2017, 10:18:41
Bag sample are made.Awesome!
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
I have to check something and fix it a little.
Post by: Petch on Mon, 01 May 2017, 13:18:24
Post by: kin25 on Mon, 01 May 2017, 13:41:37
Don't rush.
You'd better decide after seeing all things.
Post by: mindxthinker on Mon, 01 May 2017, 18:27:17
My only gripe with the bag that the fold is by the handle, rather than on the bottom like you'd expect
KIN is not happy with the handle too and he said it will be fixed.
Post by: Petch on Mon, 01 May 2017, 19:28:04
My only gripe with the bag that the fold is by the handle, rather than on the bottom like you'd expect
KIN is not happy with the handle too and he said it will be fixed.
The handle in general or its location?
Post by: mindxthinker on Mon, 01 May 2017, 19:45:55
My only gripe with the bag that the fold is by the handle, rather than on the bottom like you'd expect
KIN is not happy with the handle too and he said it will be fixed.
The handle in general or its location?
Both :D
Post by: poolside on Tue, 02 May 2017, 18:41:26
Hi Kin, I messaged you about adding the assembling service to my R1 order. Not sure if the invoice can be updated before today's payment deadline, though.
I will send an invoice again at night.
Still no invoice :'(
I messaged you again with my assembling service parts list. I am feeling bad paying late.
Post by: cocobrais on Tue, 02 May 2017, 20:42:50
Post by: popkorn62 on Wed, 03 May 2017, 02:42:51
Hi Kin, I messaged you about adding the assembling service to my R1 order. Not sure if the invoice can be updated before today's payment deadline, though.
I will send an invoice again at night.
Still no invoice :'(
I messaged you again with my assembling service parts list. I am feeling bad paying late.
Kin is having some days off this week :D
Post by: poolside on Wed, 03 May 2017, 08:12:23
Hi Kin, I messaged you about adding the assembling service to my R1 order. Not sure if the invoice can be updated before today's payment deadline, though.
I will send an invoice again at night.
Still no invoice :'(
I messaged you again with my assembling service parts list. I am feeling bad paying late.
Kin is having some days off this week :D
Thanks ;)
Post by: roostrc0gburn on Wed, 03 May 2017, 12:45:50
Post by: Soulpyre on Wed, 03 May 2017, 18:07:38
Post by: poolside on Wed, 03 May 2017, 18:18:23
Are there any images available for the red and blue case anodizing? Wondering how the gold plated gaskets might look with them. Thanks!
There was a thumbmail-sized image of the red case in the TX thread: https://geekhack.org/index.php?topic=86076.msg2408197#msg2408197
Post by: piercejenkins on Sat, 06 May 2017, 07:37:38
I sent you a few questions about my order in telegram app. I also have a general question; will this pcb and plate fit in a Dolch PAC case?
Post by: WNovizar on Sat, 06 May 2017, 19:00:46
Post by: gnmar2723 on Sat, 06 May 2017, 21:17:08
Also, how do I clarify I want a plate that will fit in my g80 case??
Post by: IAmPyhrra on Sun, 07 May 2017, 15:13:46
Was wondering if you can add on the brass weight and brass plate for my order when you're back from break.
Thanks
Post by: duynguyenle on Sun, 07 May 2017, 15:58:59
Hi Kin,
I sent you a few questions about my order in telegram app. I also have a general question; will this pcb and plate fit in a Dolch PAC case?
This has been answered multiple times before. PCB will fit into a G80 case if you desolder the RGB LEDs, TX1800 plate is bespoke, but if you want to retrofit an old G80 case, Kin does make MX1800 plate that is separate from this GB. You will have to ask him directly about those plates, since they're unrelated to this GB
Post by: kin25 on Mon, 08 May 2017, 01:16:57
I had a long trip for a week.
I will anwer your questions tomorrow.
Post by: PriusProblems on Mon, 08 May 2017, 11:48:58
Post by: Encidia on Tue, 09 May 2017, 00:46:45
What layouts are supported?
ANSI, ISO, Universal
Post by: kin25 on Tue, 09 May 2017, 13:16:08
1) outer color changing : grey to black
2) innet material changing : to eva
3) handle
4) inner space for cable
5) name tag (no picture)
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
[attachimg=6]
Post by: kin25 on Tue, 09 May 2017, 13:17:57
(2 keycaps are 1 set of gift)
[attachimg=1]
Post by: Mr_BeastQuake on Tue, 09 May 2017, 13:27:24
Post by: poolside on Tue, 09 May 2017, 13:38:08
The handle seems far better. :thumb:
Post by: futurecrime on Tue, 09 May 2017, 13:57:53
Post by: duynguyenle on Tue, 09 May 2017, 18:15:01
Post by: poolside on Tue, 09 May 2017, 18:53:10
GMK TX Logo keycaps R1 height.
(2 keycaps are 1 set of gift)
(Attachment Link)
The Batman might want some of these!
(https://lh4.googleusercontent.com/-Ko_onSgT2eQ/Uspf7EyzqhI/AAAAAAAAB6c/_AjpqvzRN-0/w600-h375-no/Batman-Marshall-Rogers.jpg)
Post by: q1w2e3r4t5z on Wed, 10 May 2017, 05:27:40
Post by: aznreaper on Wed, 10 May 2017, 23:04:14
Post by: jenggo on Thu, 11 May 2017, 04:00:04
thank you
Post by: q1w2e3r4t5z on Sun, 14 May 2017, 14:24:22
The estimated date for R1 shipping still stands??
Post by: Mr_BeastQuake on Sun, 14 May 2017, 14:34:59
The estimated date for R1 shipping still stands??
From the TX-series post in Artisan Services:
All keyboards I order get delayed this month :(
What is the new expected shipping date for grey TX CP ?
Maybe
10 June
Tx1800v2 R1
Txcp R2
Seems like R1 TX1800 is shooting for June 10 but may be wrong.
Post by: kekstee on Sun, 14 May 2017, 15:55:25
https://geekhack.org/index.php?topic=86076.msg2421587#msg2421587
Post by: q1w2e3r4t5z on Mon, 15 May 2017, 02:19:35
Post by: Mr_Grandis on Mon, 15 May 2017, 03:34:41
Post by: futurecrime on Mon, 15 May 2017, 03:50:52
Is there any way to edit the submitted google forms? I am interested to get the carrying case as it looks amazing!
Your best bet is to contact Kin on Telegram. Check his sig for info.
Post by: kidcongo on Wed, 17 May 2017, 03:00:51
Post by: Mr_BeastQuake on Wed, 17 May 2017, 11:03:50
Post by: yeager on Fri, 19 May 2017, 16:42:29
Post by: bciamny on Fri, 19 May 2017, 16:59:36
So i'm relatively new to the whole keyboard thing, my first mechanical I got a few months ago (pre-assembled) . I would like to participate in this group buy, ive read most of the "read before you post" forums but I am a tad confused on what all i need to purchase on google doc forum. sorry i'm a noob... any help would be greatly appreciated.
option 1 is pretty self explanatory, pick the case color you like. option 2 is the plate type, different types are better suited for different switches, so i've heard. ss is better for linear switches and aluminum for clicky/tactile. unsure about brass. it's also an aesthetic choice too. as for the layout, i guess that depends on your region, ansi is what is generally used in the us, iso used in the uk and elsewhere, universal gives you more switch layout options. option 3 is simply a weight that you can have as part of the keyboard. it makes it feel heavier. you may be able to see the weight on the bottom of the case but i am unsure per the pictures provided. option 4 is pretty simple, just pick how many pcbs you want. you'd want more than one if you wanted to have different switches or are thinking about selling the board in the future and would like to give the new buyer a new pcb for them to put their own switches on. you'd want one at least.
you would need to solder the switches on to the keyboard and purchase switches elsewhere to put on depending on what you like to use. you'll also need to source elsewhere stabilizers for the larger keys depending on the layout you end up going with.
kin has in his signature his telegram contact info. telegram is a communication application. you should reach out to him if you're thinking about getting into this. he's pretty transparent on the whole process and can help you figure out what you ultimately want.
hope that helps :)
Post by: yokken on Fri, 19 May 2017, 17:06:55
Post by: yeager on Fri, 19 May 2017, 22:04:54
So i'm relatively new to the whole keyboard thing, my first mechanical I got a few months ago (pre-assembled) . I would like to participate in this group buy, ive read most of the "read before you post" forums but I am a tad confused on what all i need to purchase on google doc forum. sorry i'm a noob... any help would be greatly appreciated.
option 1 is pretty self explanatory, pick the case color you like. option 2 is the plate type, different types are better suited for different switches, so i've heard. ss is better for linear switches and aluminum for clicky/tactile. unsure about brass. it's also an aesthetic choice too. as for the layout, i guess that depends on your region, ansi is what is generally used in the us, iso used in the uk and elsewhere, universal gives you more switch layout options. option 3 is simply a weight that you can have as part of the keyboard. it makes it feel heavier. you may be able to see the weight on the bottom of the case but i am unsure per the pictures provided. option 4 is pretty simple, just pick how many pcbs you want. you'd want more than one if you wanted to have different switches or are thinking about selling the board in the future and would like to give the new buyer a new pcb for them to put their own switches on. you'd want one at least.
you would need to solder the switches on to the keyboard and purchase switches elsewhere to put on depending on what you like to use. you'll also need to source elsewhere stabilizers for the larger keys depending on the layout you end up going with.
kin has in his signature his telegram contact info. telegram is a communication application. you should reach out to him if you're thinking about getting into this. he's pretty transparent on the whole process and can help you figure out what you ultimately want.
hope that helps :)
Thank you! This did help. Just a lot more options than I'm used too.
also does any one have a pic of the blue?
Post by: ghostjuggernaut on Sat, 20 May 2017, 10:38:47
Post by: merlin64 on Wed, 24 May 2017, 16:09:56
Post by: Mr_BeastQuake on Wed, 24 May 2017, 16:25:19
Post by: yokken on Thu, 25 May 2017, 16:21:51
Been a couple weeks since my Telegram message, just waiting for a reply :'(
You too? Phew, I thought I was the only one. Still waiting on a reply about adding a PCB to my order.
Post by: boo on Thu, 25 May 2017, 17:08:03
Sent from my iPhone using Tapatalk
Post by: Encidia on Thu, 25 May 2017, 17:49:23
People are starting to get their boards in Korea. Seen few posts in kbdlabs
Sent from my iPhone using Tapatalk
Nope. He was given a prototype version as a first customer, to tell Kin that if any problems with TX1800v2.
When drop starts, he have to send that red back to kin :).
We haven't get TX1800v2 yet, that red 1800v2 you've seen in kbdlab galley is an exception.
Post by: boo on Thu, 25 May 2017, 18:07:15
People are starting to get their boards in Korea. Seen few posts in kbdlabs
Sent from my iPhone using Tapatalk
Nope he was given a prototype version as a first customer, to tell Kin that if any problems with TX1800v2.
When drop starts, he have to send that red back to kin :).
We haven't get TX1800v2 yet, that red 1800v2 you've seen in kbdlab galley is an exception.
Are we talking about the same thing?
http://kbdlab.co.kr/index.php?document_srl=4402519&mid=board_Lsno50
Edit: closer look showed that it is the same user. Must be that prototype. Thanks for clarification but awesome to see nonetheless.
Sent from my iPhone using Tapatalk
Post by: futurecrime on Fri, 26 May 2017, 19:43:10
People are starting to get their boards in Korea. Seen few posts in kbdlabs
Sent from my iPhone using Tapatalk
Nope he was given a prototype version as a first customer, to tell Kin that if any problems with TX1800v2.
When drop starts, he have to send that red back to kin :).
We haven't get TX1800v2 yet, that red 1800v2 you've seen in kbdlab galley is an exception.
Are we talking about the same thing?
http://kbdlab.co.kr/index.php?document_srl=4402519&mid=board_Lsno50
Edit: closer look showed that it is the same user. Must be that prototype. Thanks for clarification but awesome to see nonetheless.
Sent from my iPhone using Tapatalk
That red is pretty nasty... maybe the pic colours are oversaturated... also, I have a niggling feeling that the gasket doesn't cover the corners. Starting to worry I won't be too into this (I've ordered a red one).
Post by: Petch on Fri, 26 May 2017, 19:47:20
Post by: futurecrime on Fri, 26 May 2017, 20:19:09
Post by: Petch on Fri, 26 May 2017, 20:43:19
You might still be able to change your colour though and go for something safer
Speaking of changing orders, hopefully Kin will reply on telgraph soon :(
Post by: Encidia on Sat, 27 May 2017, 00:40:22
Yeah you're right, I took a closer look at the OP. Still a little concerned about that red though, I really hope it's not so blood-like in the flesh. Was expecting something a little more bright and fun. :rolleyes:
That red version on the picture isn't do that justice.
I had a chance to meet KIN in person, I saw that red version.
Whatever you imagine, you will see more than that.
and I think it can't be changed after anodizing is finished.
but I think you will be satisfied when you see that red TX1800v2 in real.
Post by: WhateverZYX on Sun, 28 May 2017, 12:20:48
Post by: Petch on Sun, 28 May 2017, 21:16:37
Post by: gnmar2723 on Sun, 28 May 2017, 22:39:44
Post by: Mr_BeastQuake on Sun, 28 May 2017, 23:26:19
Has anyone managed to get in contact with Kin recently?
Messaged on 13th on Telegram... no response :'(
Post by: yokken on Mon, 29 May 2017, 11:01:01
Post by: smittysteve on Mon, 29 May 2017, 16:46:30
Know he's been traveling for work recently. I'm not gripping just yet... Mostly because many of us have multiple TX boards with smooth transactions. Also, I think he's helping LZ ship the CLS GB (? not 100% sure on that). Honestly, I'm getting nervous, but keeping the faith (though I check Telegram daily like a psycho boyfriend to see if he's written me back yet...).
Kin, justify our love... just a little hi, howdy and update, please??
Post by: kin25 on Tue, 30 May 2017, 02:50:08
(1) there were some error in PCB.
PCB holes were small.
(they were not ordinary)
all pcb are fixed and I will receive them in this week.
(2) metal gaskets were made again.
(3) tx bags name tag were late.
Now all bags are made.
[attachimg=1]
[attachimg=2]
[attachimg=3]
[attachimg=4]
[attachimg=5]
Post by: Petch on Tue, 30 May 2017, 03:01:51
I've left a message on Telegraph regarding colour of another board and about additional PCB+brass plate
Post by: Mr_BeastQuake on Tue, 30 May 2017, 03:02:15
Sorry, I was busy for fixing some problem.
(1) there were some error in PCB.
PCB holes were small.
(they were not ordinary)
all pcb are fixed and I will receive them in this week.
(2) metal gaskets were made again.
(3) tx bags name tag were late.
Now all bags are made.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
:thumb: also messaged on Telegram (5/13) for switching extra plate to SS rather than aluminum
Post by: kin25 on Tue, 30 May 2017, 03:03:48
I can start shipping tx1800v2 and txcp r2.
Post by: kin25 on Tue, 30 May 2017, 03:05:45
So, i will send email before shipping to check order.
Post by: ricyuyc on Tue, 30 May 2017, 04:33:33
Sorry, I was busy for fixing some problem.Does TX Bag for TX75 ready to be ordered?
(1) there were some error in PCB.
PCB holes were small.
(they were not ordinary)
all pcb are fixed and I will receive them in this week.
(2) metal gaskets were made again.
(3) tx bags name tag were late.
Now all bags are made.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Post by: Jumie on Tue, 30 May 2017, 07:08:48
Post by: kin25 on Tue, 30 May 2017, 07:31:15
Sorry, I was busy for fixing some problem.Does TX Bag for TX75 ready to be ordered?
(1) there were some error in PCB.
PCB holes were small.
(they were not ordinary)
all pcb are fixed and I will receive them in this week.
(2) metal gaskets were made again.
(3) tx bags name tag were late.
Now all bags are made.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Because shipping cost is expensive.
US and Europe proxies will help me to take orders of tx bags.
Post by: kin25 on Tue, 30 May 2017, 07:38:17
Waiting for invoice
Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.
Post by: Petch on Tue, 30 May 2017, 07:43:09
Kin are you able to chat on Telegraph about the TX75 I've included with my TX1800v2?Waiting for invoice
Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.
Post by: kin25 on Tue, 30 May 2017, 07:48:38
Kin are you able to chat on Telegraph about the TX75 I've included with my TX1800v2?Waiting for invoice
Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.
Sorry..
I will chat a few hours later.
Post by: ricyuyc on Tue, 30 May 2017, 08:08:57
I could afford the shipping as I am in Hong Kong city, just let me know while the TX75 bag is ready.Sorry, I was busy for fixing some problem.Does TX Bag for TX75 ready to be ordered?
(1) there were some error in PCB.
PCB holes were small.
(they were not ordinary)
all pcb are fixed and I will receive them in this week.
(2) metal gaskets were made again.
(3) tx bags name tag were late.
Now all bags are made.
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Because shipping cost is expensive.
US and Europe proxies will help me to take orders of tx bags.
Thank You.
Post by: filphil on Tue, 30 May 2017, 09:05:53
Post by: MAR82 on Tue, 30 May 2017, 09:28:44
Thanks
Post by: Petch on Tue, 30 May 2017, 09:48:38
Will the TX1800v2 R1 boards be going out soon? If I understood correctly you are just waiting for the fixed PCBs to be shipped back to you?
Thanks
June 10
I can start shipping tx1800v2 and txcp r2.
Post by: MAR82 on Tue, 30 May 2017, 09:54:56
Will the TX1800v2 R1 boards be going out soon? If I understood correctly you are just waiting for the fixed PCBs to be shipped back to you?
ThanksJune 10
I can start shipping tx1800v2 and txcp r2.
Thanks for that reply
Post by: alienman82 on Tue, 30 May 2017, 10:29:15
Post by: merlin64 on Tue, 30 May 2017, 10:32:20
Post by: MAR82 on Tue, 30 May 2017, 10:35:04
Post by: alienman82 on Tue, 30 May 2017, 10:43:34
Post by: kconfire on Tue, 30 May 2017, 12:42:13
When is the last date to fill in the form to purchase this beauty?
Thank you!
Post by: kconfire on Tue, 30 May 2017, 13:00:30
TX1800은 사랑입니다.
-MiND-
마인드님 여기까지 출장오셨군요.
이번 v2는 전세계 통틀어서 마인드님이 주문수량 1위 입니다.
대체 몇대를 주문하셨길래요... ㅋㅋㅋ :eek:
Post by: kidcongo on Wed, 31 May 2017, 02:17:54
The pre-order sheet appears to still be up. Is there a final day for us to put preorders in for R2?I'd like to know this too, I think I'll be in if its still on, though as posted earlier in the thread, a picture of the blue case would be nice before making a decision.......Any chance of an update for R2 Kin?
Post by: WNovizar on Wed, 31 May 2017, 02:27:27
Post by: futurecrime on Wed, 31 May 2017, 09:29:33
The pre-order sheet appears to still be up. Is there a final day for us to put preorders in for R2?I'd like to know this too, I think I'll be in if its still on, though as posted earlier in the thread, a picture of the blue case would be nice before making a decision.......Any chance of an update for R2 Kin?
He told me on Telegram I can confirm colour choice after seeing the R1 blue and red cases. :thumb:
Post by: flyboyalif on Thu, 01 June 2017, 08:39:19
Post by: kidcongo on Thu, 01 June 2017, 17:45:47
Well he said TX1800 V2 R2 will ship on July 1st, that's why the preorder form is still up..Somehow managed to miss that post until today!
Good to know, still unsure of colour but have submitted an order form and pretty excited ;DThe pre-order sheet appears to still be up. Is there a final day for us to put preorders in for R2?I'd like to know this too, I think I'll be in if its still on, though as posted earlier in the thread, a picture of the blue case would be nice before making a decision.......Any chance of an update for R2 Kin?
He told me on Telegram I can confirm colour choice after seeing the R1 blue and red cases. :thumb:
Post by: krispy on Fri, 09 June 2017, 10:35:07
Post by: q1w2e3r4t5z on Fri, 09 June 2017, 13:16:00
Too many buyers wanted to change and add parts.
So, i will send email before shipping to check order.
Are tx1800v2 and txcp r2 still shipping tomorrow? I'm getting pretty excited! :)
Since I haven't got an email yet I suppose not?
Post by: kekstee on Sat, 10 June 2017, 08:33:30
Didn't reply in Telegram either for a few days.
Post by: flyboyalif on Sat, 10 June 2017, 18:44:29
I imagine he's really busy preparing stuff or tearing his hair out over some last minute errors :D
Didn't reply in Telegram either for a few days.
yeah feel same ;D
Post by: DreLLin on Mon, 12 June 2017, 05:27:41
Post by: Petch on Mon, 12 June 2017, 05:46:33
Any updates about shipping or did anyone got a shipping notification yet?We should get an email with an order confirmation before shipping starts
Post by: q1w2e3r4t5z on Wed, 14 June 2017, 01:41:17
Post by: mindxthinker on Wed, 14 June 2017, 02:37:27
Hmmm, nothing yet. Delays can happen ,sure, but did anyone hear from kin?
KIN told me that he will be ready to ship out from next Monday (6/19)
But that's for Korea GB not sure about international(GeekHack).
Post by: q1w2e3r4t5z on Wed, 14 June 2017, 04:05:04
Post by: Mr_BeastQuake on Wed, 14 June 2017, 20:35:49
Hmmm, nothing yet. Delays can happen ,sure, but did anyone hear from kin?
KIN told me that he will be ready to ship out from next Monday (6/19)
But that's for Korea GB not sure about international(GeekHack).
Thanks for the info. I feel like Kin should make the 5 minute trek to GH and update on this pre-order doe. I'm achin'
Post by: Uleoja on Thu, 15 June 2017, 11:57:19
Post by: q1w2e3r4t5z on Thu, 15 June 2017, 13:28:48
Just to clarify. TX-1800v2 R1 has not shipped yet. Correct?Correct
Post by: kconfire on Fri, 16 June 2017, 00:26:31
Anybody know if I can still fill in the GB form?
The form appears to be open at the moment..
Post by: Encidia on Fri, 16 June 2017, 05:51:12
If R2 is still available for sign-up I may be interested in signing up for one towards the end of this month.
Anybody know if I can still fill in the GB form?
The form appears to be open at the moment..
콘파이어님 안녕하세요~ㅎㅎ 아직 r2 진행중이신걸로 알고있습니다 ㅎㅎ
Post by: lac29 on Sun, 18 June 2017, 12:45:08
Post by: kidcongo on Sun, 18 June 2017, 13:11:41
Has anyone out there who signed up for round 2 had an invoice/any info?
Post by: DreLLin on Tue, 20 June 2017, 09:15:05
Post by: q1w2e3r4t5z on Tue, 20 June 2017, 12:53:17
Post by: futurecrime on Tue, 20 June 2017, 13:05:07
still no news from kin? I am wondering if round 1 will ship before round 2 when round 2 starts shipping on 7/1.
I still haven't confirmed my colour choice for R2 so can't imagine it's happening that soon!
Post by: Mr_BeastQuake on Tue, 20 June 2017, 15:07:07
http://kbdlab.co.kr/index.php?document_srl=4463859&mid=board_Lsno50
Post by: wodan on Wed, 21 June 2017, 06:39:01
This will be one of the quickest custom GBs ever ...
Post by: avid on Wed, 21 June 2017, 07:29:11
Post by: ricyuyc on Fri, 23 June 2017, 01:43:24
[attach=1]
Post by: flyboyalif on Fri, 23 June 2017, 01:44:16
do you have link into this forum?Show Image(http://kbdlab.co.kr/files/attach/images/340/743/470/004/d883231703d6a41399c167199b9c0c34.jpg)
TX1800v2 in titanium grey, from kbdlab.co.krShow Image(http://kbdlab.co.kr/files/attach/images/340/743/470/004/d883231703d6a41399c167199b9c0c34.jpg)
Sent from my SM-G950F using Tapatalk
Post by: ricyuyc on Fri, 23 June 2017, 01:47:06
Grey: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743)do you have link into this forum?
TX1800v2 in titanium grey, from kbdlab.co.kr
Sent from my SM-G950F using Tapatalk
Black: http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859)
Post by: ihalatch on Fri, 23 June 2017, 01:50:46
Super exciting. Will we get the gold "Cherry" + logo sticker?Grey: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743)do you have link into this forum?
TX1800v2 in titanium grey, from kbdlab.co.kr
Sent from my SM-G950F using Tapatalk
Black: http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859)
http://kbdlab.co.kr/index.php?document_srl=4469944&mid=board_Lsno50
http://kbdlab.co.kr/index.php?document_srl=4464634&mid=board_Lsno50
http://kbdlab.co.kr/index.php?document_srl=4463859&mid=board_Lsno50
http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4471621
Post by: boo on Fri, 23 June 2017, 02:38:05
Most likely notSuper exciting. Will we get the gold "Cherry" + logo sticker?Grey: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743)do you have link into this forum?
TX1800v2 in titanium grey, from kbdlab.co.kr
Sent from my SM-G950F using Tapatalk
Black: http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859)
http://kbdlab.co.kr/index.php?document_srl=4469944&mid=board_Lsno50
http://kbdlab.co.kr/index.php?document_srl=4464634&mid=board_Lsno50
http://kbdlab.co.kr/index.php?document_srl=4463859&mid=board_Lsno50
http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4471621
Sent from my iPhone using Tapatalk
Post by: avid on Fri, 23 June 2017, 08:51:26
Post by: Slash Emperor on Fri, 23 June 2017, 11:14:13
Grey: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743)do you have link into this forum?
TX1800v2 in titanium grey, from kbdlab.co.kr
Sent from my SM-G950F using Tapatalk
Black: http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859)
I am so happy I ordered the titanium gray in R1, but now I want a black, too.
Post by: boo on Fri, 23 June 2017, 16:28:44
Grey looks dope although I ordered black. Perhaps swap? HahaGrey: http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4470743)do you have link into this forum?
TX1800v2 in titanium grey, from kbdlab.co.kr
Sent from my SM-G950F using Tapatalk
Black: http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&page=2&document_srl=4463859)
I am so happy I ordered the titanium gray in R1, but now I want a black, too.
Sent from my iPhone using Tapatalk
Post by: afrokobe on Sun, 25 June 2017, 16:29:16
Post by: ricyuyc on Sun, 25 June 2017, 21:13:21
http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4473648 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4473648)
[attach=1]
Post by: Puddsy on Sun, 25 June 2017, 23:45:59
Post by: ipreferpie on Mon, 26 June 2017, 10:47:55
Post by: alienman82 on Mon, 26 June 2017, 16:35:19
Post by: Mr_BeastQuake on Mon, 26 June 2017, 17:13:17
so no updates from kin? :(
I would assume R1 ships out after Korea's GB finishes. Which is apparently shipping according to kbdlab. Though, it doesn't take much effort to just come here and say that... I don't think anyone here is rioting, but I feel like people haven't known what is going on with the R2 form for awhile now either.
Post by: smittysteve on Mon, 26 June 2017, 17:21:58
So that could be referring to the Korea GB boards or ours, I suppose.
Agree with Mr_BeastQuake- would sure be nice to hear updates from Kin on this buy. I'm not worried that things have gone sideways, but usually he's so awesome at communicating, it's disconcerting and a bit frustrating when he goes silent here and doesn't respond on Telegram. Help us out please, kin?
Sent from my iPhone using Tapatalk
Post by: q1w2e3r4t5z on Tue, 27 June 2017, 07:45:58
Post by: ihalatch on Tue, 27 June 2017, 08:09:06
Koreans already got theirs as it seems: https://www.reddit.com/r/MechanicalKeyboards/comments/6jqqgh/tx1800_v2_titan_gray_gmk_skidata/
Wow, this is one sweet keyboard!
Post by: kitchenace13 on Tue, 27 June 2017, 11:46:56
Post by: q1w2e3r4t5z on Tue, 27 June 2017, 12:50:06
I guess maybe the wrong thread (but I saw Kin posting about both in an earlier message) - any word on the TXCP R2 as well? Not sure if its being done concurrently with the 1800 v2. It seemed like before he was thinking of shipping them at the same time. Thanks!Seems like he just shipped the Korean keyboards, the rest didn't even receive an email verifying the color etc. before actually sending out
Post by: popkorn62 on Tue, 27 June 2017, 17:46:01
I'd advise you to use the same email as the one you order with for easier tracking.
Post by: Puddsy on Tue, 27 June 2017, 17:50:40
Post by: romevi on Tue, 27 June 2017, 17:51:06
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.
I'd advise you to use the same email as the one you order with for easier tracking.
No.
Post by: popkorn62 on Tue, 27 June 2017, 18:03:02
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.
I'd advise you to use the same email as the one you order with for easier tracking.
No.
You know you want it
Post by: kawasaki161 on Tue, 27 June 2017, 18:11:08
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.Uhhhh... pls take a look at this again.
I'd advise you to use the same email as the one you order with for easier tracking.
(http://puu.sh/wvVU0/47dbc289fb.png)
TX1800 v2
First revision of the TX-1800
Post by: popkorn62 on Tue, 27 June 2017, 18:14:20
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.Uhhhh... pls take a look at this again.
I'd advise you to use the same email as the one you order with for easier tracking.Show Image(http://puu.sh/wvVU0/47dbc289fb.png)
TX1800 v2
First revision of the TX-1800
Fixed!
Also, if you guys want to contribute some pics for the slides I'm all for it. I usually keep them at 5 slides but my pics suck.
Post by: Mr_BeastQuake on Tue, 27 June 2017, 18:17:59
Post by: romevi on Tue, 27 June 2017, 18:28:13
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.
I'd advise you to use the same email as the one you order with for easier tracking.
No.
You know you want it
:rolleyes:
Post by: ihalatch on Tue, 27 June 2017, 21:53:45
Post by: ipreferpie on Tue, 27 June 2017, 22:40:09
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.Uhhhh... pls take a look at this again.
I'd advise you to use the same email as the one you order with for easier tracking.Show Image(http://puu.sh/wvVU0/47dbc289fb.png)
TX1800 v2
First revision of the TX-1800
Fixed!
Also, if you guys want to contribute some pics for the slides I'm all for it. I usually keep them at 5 slides but my pics suck.
On the Google forms were were able to pick metal standoffs and metal type for weights along with no PCB option. Can we till do that?
Post by: popkorn62 on Wed, 28 June 2017, 00:04:31
I can't activate my account??? I didn't get the conformation email with the verification for my email?
Not sure what your email is but I just activated a bunch of accounts. If you are still not be able to login please pm me your email :cool:
Post by: popkorn62 on Wed, 28 June 2017, 00:34:24
If we had wanted to say, switch the type of our extra plate, and had messaged Kin prior, is the site a place where we should do that again?
You don't need to do that again.
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.Uhhhh... pls take a look at this again.
I'd advise you to use the same email as the one you order with for easier tracking.Show Image(http://puu.sh/wvVU0/47dbc289fb.png)
TX1800 v2
First revision of the TX-1800
Fixed!
Also, if you guys want to contribute some pics for the slides I'm all for it. I usually keep them at 5 slides but my pics suck.
On the Google forms were were able to pick metal standoffs and metal type for weights along with no PCB option. Can we till do that?
if you meant choosing between brass and stainless steel weight i don't see why not. Not sure what the metal standoffs are.
Post by: boo on Wed, 28 June 2017, 00:46:43
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.
I'd advise you to use the same email as the one you order with for easier tracking.
I registered. Is it suppose to link our order to our account? Email used are the same.
Sent from my iPhone using Tapatalk
Post by: kidcongo on Wed, 28 June 2017, 00:50:47
Post by: ricyuyc on Wed, 28 June 2017, 00:54:39
Hi guys! I want to invite you guys to http://txkeyboards.com/ (http://txkeyboards.com/) to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.Unable to get through the account registering, the End Point protection blocked that due to info. is attempted to transfer without encryption.
I'd advise you to use the same email as the one you order with for easier tracking.
Post by: popkorn62 on Wed, 28 June 2017, 01:25:35
I still have had no invoice for the R2 form I submitted, is this new site the place to chase it? Seems very late if shipping next week (I've tried telegram and no joy)....Kin's Paypal got frozen around 1 month ago so if you registered after then he could not send an invoice. Extras will be available through the website. Mass emails will be sent then.
Hi guys! I want to invite you guys to http://txkeyboards.com/ (http://txkeyboards.com/) to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.Unable to get through the account registering, the End Point protection blocked that due to info. is attempted to transfer without encryption.
I'd advise you to use the same email as the one you order with for easier tracking.
I'll look into this
Hi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.
I'd advise you to use the same email as the one you order with for easier tracking.
I registered. Is it suppose to link our order to our account? Email used are the same.
Sent from my iPhone using Tapatalk
It should be. I just tried registering for 3 different emails without any problems. Activation email can be delayed 10-20 secs but it will/should be sent.
Post by: boo on Wed, 28 June 2017, 01:33:51
I still have had no invoice for the R2 form I submitted, is this new site the place to chase it? Seems very late if shipping next week (I've tried telegram and no joy)....Kin's Paypal got frozen around 1 month ago so if you registered after then he could not send an invoice. Extras will be available through the website. Mass emails will be sent then.Hi guys! I want to invite you guys to http://txkeyboards.com/ (http://txkeyboards.com/) to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.Unable to get through the account registering, the End Point protection blocked that due to info. is attempted to transfer without encryption.
I'd advise you to use the same email as the one you order with for easier tracking.
I'll look into thisHi guys! I want to invite you guys to http://txkeyboards.com/ to register an account. All updates will be on there. You can also send support ticket after registering an account. There are many things I want to improve on the website but I see that shipping time usually when you guys need support the most so I'm launching it now.
I'd advise you to use the same email as the one you order with for easier tracking.
I registered. Is it suppose to link our order to our account? Email used are the same.
Sent from my iPhone using Tapatalk
It should be. I just tried registering for 3 different emails without any problems. Activation email can be delayed 10-20 secs but it will/should be sent.
I should note that I was able to log in just fine, perhaps I need to pm you to link my account and order together. Will do so now :)
Post by: ipreferpie on Wed, 28 June 2017, 01:49:05
Post by: dorf on Wed, 28 June 2017, 02:05:37
Post by: kidcongo on Wed, 28 June 2017, 02:09:02
I still have had no invoice for the R2 form I submitted, is this new site the place to chase it? Seems very late if shipping next week (I've tried telegram and no joy)....Kin's Paypal got frozen around 1 month ago so if you registered after then he could not send an invoice. Extras will be available through the website. Mass emails will be sent then.
Ok, so to clarify, if the form was submitted in the past month the order is not counted at all, no priority on any extras or anything?
Post by: ___q on Wed, 28 June 2017, 09:29:50
Ok, so to clarify, if the form was submitted in the past month the order is not counted at all, no priority on any extras or anything?
That is my understanding from discussions with folks via the website.
Post by: q1w2e3r4t5z on Wed, 28 June 2017, 10:56:21
Is it suppose to link our order to our account? Email used are the same.My order doesn't show up, unfortunately. Same mail address
Post by: smittysteve on Wed, 28 June 2017, 11:00:08
Is it suppose to link our order to our account? Email used are the same.My order doesn't show up, unfortunately. Same mail address
Same here. Same email, no order showing up. I would like to check order and make sure changes and such have been noted. Would make me feel a heck of a lot better to check before shipping.
Post by: kimbles on Wed, 28 June 2017, 11:14:00
Is it suppose to link our order to our account? Email used are the same.My order doesn't show up, unfortunately. Same mail address
Same here. Same email, no order showing up. I would like to check order and make sure changes and such have been noted. Would make me feel a heck of a lot better to check before shipping.
I think as long as you have your email the same as your order the support ticket should be pretty responsive on your orders. I asked about my order late in the afternoon yesterday and got a response a few hours later in regards to it.
Post by: popkorn62 on Wed, 28 June 2017, 11:39:41
Regarding the GB: Stay put. If you paid for your order, you'll be on the list of orders to be sent out. As of now, there's no changes regarding the shipping estimate.
____q is correct as of now. Kin said he wanted to take care of orders that did go through first before getting on to the extra list and decided what to do.
Post by: popkorn62 on Wed, 28 June 2017, 11:43:48
Is it suppose to link our order to our account? Email used are the same.My order doesn't show up, unfortunately. Same mail address
By using the same email, it'd be easier to look at the order list to track you down when you inquire about something. I will very likely not going to import the list to the website.
Post by: q1w2e3r4t5z on Wed, 28 June 2017, 11:50:57
Hmmm, I do have the invoice where the configuration was stated but it'd be nice if the choices are there as wellIs it suppose to link our order to our account? Email used are the same.My order doesn't show up, unfortunately. Same mail address
By using the same email, it'd be easier to look at the order list to track you down when you inquire about something. I will very likely not going to import the list to the website.
Post by: popkorn62 on Wed, 28 June 2017, 11:57:38
Hmmm, I do have the invoice where the configuration was stated but it'd be nice if the choices are there as wellIs it suppose to link our order to our account? Email used are the same.My order doesn't show up, unfortunately. Same mail address
By using the same email, it'd be easier to look at the order list to track you down when you inquire about something. I will very likely not going to import the list to the website.
I'm not sure what you want at this point LOL. Sorry maybe it's my reading comprehension. Do you mean you want to see the choices that you can change your order to? Please send a ticket if you want to change your order. If you've already pm kin your changes then it's likely he already updated it.
Post by: q1w2e3r4t5z on Wed, 28 June 2017, 11:59:44
Good to know, thanks :)Hmmm, I do have the invoice where the configuration was stated but it'd be nice if the choices are there as wellIs it suppose to link our order to our account? Email used are the same.My order doesn't show up, unfortunately. Same mail address
By using the same email, it'd be easier to look at the order list to track you down when you inquire about something. I will very likely not going to import the list to the website.
I'm not sure what you want at this point LOL. Sorry maybe it's my reading comprehension. Do you mean you want to see the choices that you can change your order to? Please send a ticket if you want to change your order. If you've already pm kin your changes then it's likely he already updated it.
Post by: kidcongo on Wed, 28 June 2017, 23:45:03
Ok, so to clarify, if the form was submitted in the past month the order is not counted at all, no priority on any extras or anything?
That is my understanding from discussions with folks via the website.
____q is correct as of now. Kin said he wanted to take care of orders that did go through first before getting on to the extra list and decided what to do.
Thanks for the info. That's pretty disappointing for me, maybe extras will be offered....
Post by: Mr_Grandis on Thu, 29 June 2017, 01:29:05
Ok, so to clarify, if the form was submitted in the past month the order is not counted at all, no priority on any extras or anything?
That is my understanding from discussions with folks via the website.
hummmm that's quite disappointing, guess we can't only wait for more info's then...
Post by: futurecrime on Thu, 29 June 2017, 09:27:08
General answer regarding email issues: Something is wrong with my email on the backend and I'm working on it. In the meantime, I've activated everyone and you should be log in just fine.
Regarding the GB: Stay put. If you paid for your order, you'll be on the list of orders to be sent out. As of now, there's no changes regarding the shipping estimate.
____q is correct as of now. Kin said he wanted to take care of orders that did go through first before getting on to the extra list and decided what to do.
I ordered mine on April 23rd so should be in R2. But I haven't paid for it as I've been waiting for an updated invoice with some changes I made. Kin said it would be fine to wait to see the R1 keyboards before finalising R2 options (basically deciding between red and blue) and not to worry about paying yet as long as it's paid for before it's posted. I've messaged him on Telegram with no response (I understand he's dealing with a lot of logistics, etc at the moment so no worries) but seeing this info has me a little worried. Can you confirm that my order still stands? I have an unpaid invoice in my Paypal from my initial order which I'm happy to pay now, and then settle the difference when the changes are added, if that helps?
Post by: popkorn62 on Thu, 29 June 2017, 11:19:01
General answer regarding email issues: Something is wrong with my email on the backend and I'm working on it. In the meantime, I've activated everyone and you should be log in just fine.
Regarding the GB: Stay put. If you paid for your order, you'll be on the list of orders to be sent out. As of now, there's no changes regarding the shipping estimate.
____q is correct as of now. Kin said he wanted to take care of orders that did go through first before getting on to the extra list and decided what to do.
I ordered mine on April 23rd so should be in R2. But I haven't paid for it as I've been waiting for an updated invoice with some changes I made. Kin said it would be fine to wait to see the R1 keyboards before finalising R2 options (basically deciding between red and blue) and not to worry about paying yet as long as it's paid for before it's posted. I've messaged him on Telegram with no response (I understand he's dealing with a lot of logistics, etc at the moment so no worries) but seeing this info has me a little worried. Can you confirm that my order still stands? I have an unpaid invoice in my Paypal from my initial order which I'm happy to pay now, and then settle the difference when the changes are added, if that helps?
If he said so then you're fine. My reply mainly directed to people who got in the GB AFTER Kin's Paypal account was frozen.
To everyone who submitted the tickets, I'm working with Kin to confirm your changes and will reply to you on there.
Post by: futurecrime on Thu, 29 June 2017, 11:32:24
If he said so then you're fine. My reply mainly directed to people who got in the GB AFTER Kin's Paypal account was frozen.
Cheers! :thumb:
Post by: Petch on Thu, 29 June 2017, 15:14:49
I had 2 different keyboards and I'd changed my order for each one of them a couple of times before hand (via Telegraph) and I'd just like to get a final confirmation
Post by: popkorn62 on Thu, 29 June 2017, 16:36:04
Will I still be receiving an order confirmation before shipment?
I had 2 different keyboards and I'd changed my order for each one of them a couple of times before hand (via Telegraph) and I'd just like to get a final confirmation
If kin has responded to you via any apps then you're fine.
The website is to clump all the people together in their own ticket for better support/tracking. However, since Kin is super busy w test season, the site won't help much at the mean time. It will be better for the next sale.
Post by: boo on Thu, 29 June 2017, 21:05:27
Please ignore ticket #TV17729874
Instead use ticket #MH70317204
Sorry about the confusion. I goofed.
Post by: popkorn62 on Fri, 30 June 2017, 00:40:04
Hi popkorn
Please ignore ticket #TV17729874
Instead use ticket #MH70317204
Sorry about the confusion. I goofed.
No worries. I got it :thumb:
Post by: duynguyenle on Fri, 30 June 2017, 05:47:53
I have texted Kin on telegram a while ago but have not gotten a reply. Is this still possible?
Post by: popkorn62 on Fri, 30 June 2017, 12:24:59
I would like to add an extra plate and pcb to my order, (I believe I ordered early enough to be in Round 1)
I have texted Kin on telegram a while ago but have not gotten a reply. Is this still possible?
Please submit a support ticket.
Post by: megaforce on Fri, 30 June 2017, 12:37:12
Usually Kin would take order on Telegram, but I'm sure our boy is buried in message right now.
Post by: popkorn62 on Fri, 30 June 2017, 16:17:41
For films and springs, should be wait until the GB is over to fill out a ticket?
Usually Kin would take order on Telegram, but I'm sure our boy is buried in message right now.
This. And also it's exam season in Korea.
Post by: barcode on Sat, 01 July 2017, 00:06:31
Post by: popkorn62 on Sat, 01 July 2017, 02:40:45
is it possible to still get in on this gb or will i need to wait for round three?Most likely there'll be extras
Post by: BOK on Sat, 01 July 2017, 16:45:54
Post by: Puddsy on Sat, 01 July 2017, 17:05:53
tx1800V2_SKIDATA(ANSI)
Man, that's nice. I really want to get one of these, but also money.
Post by: alienman82 on Sat, 01 July 2017, 19:19:38
Post by: kidcongo on Sun, 02 July 2017, 01:53:30
tx1800V2_SKIDATA(ANSI)
Very, very nice man, any pictures of the bottom?
Blue with the brass is what I ordered, well thought I'd ordered.. :'(
Post by: renzpwns on Sun, 02 July 2017, 03:20:01
tx1800V2_SKIDATA(ANSI)Wow, here I thought brass plates only worked when paired with black cases. Also, Skidata+ is definitely lookin ace in that blue case.
Post by: smittysteve on Sun, 02 July 2017, 08:30:42
tx1800V2_SKIDATA(ANSI)
Dude- that blue is HOT!!! Great looking board, congrats.
Post by: smittysteve on Sun, 02 July 2017, 08:38:22
Waiting for invoice
Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.
Missed all these responses while traveling- appreciate the updates, Kin... you're the man!!
So looking forward to more of these boards in the wild. I sent a message about shipping- would appreciate you hanging on and not sending mine out until after July 17. Thanks!!
edit: posts from June. I'm an idiot ---> blames the jetlag :confused:
Post by: duynguyenle on Sun, 02 July 2017, 19:57:55
Waiting for invoice
Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.
Missed all these responses while traveling- appreciate the updates, Kin... you're the man!!
So looking forward to more of these boards in the wild. I sent a message about shipping- would appreciate you hanging on and not sending mine out until after July 17. Thanks!!
edit: posts from June. I'm an idiot ---> blames the jetlag :confused:
Actually from May so :confused:
Post by: smittysteve on Sun, 02 July 2017, 20:01:17
Waiting for invoice
Don't worry.
Tx1800v2(r2) shipping day is July 1.
After fixing some problem. I will send an invoice.
In factory, tx1800v2(r2) is being made now.
Missed all these responses while traveling- appreciate the updates, Kin... you're the man!!
So looking forward to more of these boards in the wild. I sent a message about shipping- would appreciate you hanging on and not sending mine out until after July 17. Thanks!!
edit: posts from June. I'm an idiot ---> blames the jetlag :confused:
Actually from May so :confused:
Sorry. My bad. Went a page back. Maybe four. Got excited to see Kin responses. Think Popcorn's latest is the word to roll with.
Post by: popkorn62 on Tue, 04 July 2017, 00:41:13
Post by: duynguyenle on Tue, 04 July 2017, 07:12:33
I know some tickets are still open pls be patient while I'm working on it with kin. He's very very
It seems you are also very very
Too very very to finish the sentence :p
All joking aside, I'm getting hyped up, got switches and stabilisers all ready! Looks like I'm too poor this month to buy extra plates and PCBs, so I haven't submitted any tickets left. Hopefully there are enough extra PCBs down the line
Post by: romevi on Tue, 04 July 2017, 08:11:58
I know some tickets are still open pls be patient while I'm working on it with kin. He's very very
It seems you are also very very
Too very very to finish the sentence
Post by: popkorn62 on Tue, 04 July 2017, 14:08:47
.
Post by: kawasaki161 on Tue, 04 July 2017, 17:32:04
Post by: q1w2e3r4t5z on Thu, 06 July 2017, 05:56:05
Post by: krispy on Thu, 06 July 2017, 08:34:43
Post by: Mr_BeastQuake on Thu, 06 July 2017, 15:00:00
Post by: Puddsy on Thu, 06 July 2017, 15:23:16
Any chance dropping out of my R1 TX1800 spot is a possibility at this point?
Given the speed of kin's communication, you'll have better luck flipping your board when it shows up.
Post by: kimbles on Thu, 06 July 2017, 15:55:29
Any chance dropping out of my R1 TX1800 spot is a possibility at this point?
What color kit did ya get? :-X
Post by: popkorn62 on Thu, 06 July 2017, 16:02:35
Post by: Mr_BeastQuake on Thu, 06 July 2017, 16:35:21
Any chance dropping out of my R1 TX1800 spot is a possibility at this point?
Given the speed of kin's communication, you'll have better luck flipping your board when it shows up.
Aye, but if I didn't ask and I could've done it then I would've been sad.
Post by: avid on Thu, 06 July 2017, 16:39:29
Post by: Mr_BeastQuake on Thu, 06 July 2017, 16:43:00
Specs beastquake?
Not looking to pre-sell something that, quite frankly, I have no idea when it is going to show up. If it comes to me then that's one thing but really just looking to get out. Though, as previously stated that is unlikely.
Post by: avid on Thu, 06 July 2017, 16:45:00
Post by: Mr_BeastQuake on Thu, 06 July 2017, 16:47:02
In most GBs transfering spots is usually possible which i thought u wanted to do (possible through a fee), but is the assumtion here its not possible (since kin seems hard to get hold of)
The communication necessary to cancel one invoice and simultaneously send another, while not a lot, doesn't seem likely right now. As popkorn said, kin is busy, I get that so not really complaining just being real about the situation.
Post by: q1w2e3r4t5z on Fri, 07 July 2017, 04:14:21
Post by: Petch on Fri, 07 July 2017, 04:26:18
I'm gonna be honest: My gut says that it won't show up. I paid the invoice on 4/21 so I will at least wait until 10/20 'cause it's the last day where a complaint via PayPal is possible; if it shows up before I'm more than happy but as said I've a bad feeling given the poor communication and the constant delays. There's a lot of money in play and IIRC Kin has once been forbidden to sell stuff here at GH due to the things listedI'm pretty sure they've started turning up in Korea
Post by: q1w2e3r4t5z on Fri, 07 July 2017, 04:53:50
As said I'll wait, that's not the issue... I was merely expressing my thoughts and no, I do not think we have another Ivan amongst us :)I'm gonna be honest: My gut says that it won't show up. I paid the invoice on 4/21 so I will at least wait until 10/20 'cause it's the last day where a complaint via PayPal is possible; if it shows up before I'm more than happy but as said I've a bad feeling given the poor communication and the constant delays. There's a lot of money in play and IIRC Kin has once been forbidden to sell stuff here at GH due to the things listedI'm pretty sure they've started turning up in Korea
Post by: Mr_BeastQuake on Fri, 07 July 2017, 08:25:42
I'm gonna be honest: My gut says that it won't show up. I paid the invoice on 4/21 so I will at least wait until 10/20 'cause it's the last day where a complaint via PayPal is possible; if it shows up before I'm more than happy but as said I've a bad feeling given the poor communication and the constant delays. There's a lot of money in play and IIRC Kin has once been forbidden to sell stuff here at GH due to the things listed
I'd be confident you'll get it. The boards exist and don't seem to suffer from quality issues as indicated by the KR boards. When you'll get it is probably unknown. I try and remember Kin is probably trying to package 200 or so (200 TXCP boards not included?) boards for shipping at what is apparently a busy time for him. Not an excuse for not dropping off a one lined update every once in awhile but that thought helps alleviate some frustration for me.
Post by: popkorn62 on Fri, 07 July 2017, 10:13:57
Post by: smittysteve on Fri, 07 July 2017, 10:25:04
Newest update: Shipments were delayed by the factory. New shipping date will be announced soon. Apologies for any inconvenience and please submit support tickets if you'd like to change anything to your orders. Shipping should not be more than 4 weeks from now.
Hey Popcorn. Thanks for the update.
Do you think there's a chance we could just see an order spreadsheet? I think we'd all like to check and see what will be coming our way. I'm not bothered by the delay, but do want to make sure the correct items are sent once it's all shipped. Seems a spreadsheet would be easier than everyone opening tickets and dealing with it all one-by-one.
Post by: Petch on Fri, 07 July 2017, 10:34:02
Post by: smittysteve on Fri, 07 July 2017, 10:45:59
Yep, I'd like to double-check my order as well and Kin is inactive on telegraph
Exactly. We were spoiled in previous TX buys because you could just chat with Kin, see pics, etc., then it all showed up at your door. I get he's busy too- MrBeastQuake has the right attitude there and I'm with you on that. However, with him MIA on here and Telegram it would be really nice to see a spreadsheet.
Still total confidence in awesome boards being delivered, just need an uptick in communication here as we near the end so we aren't trying to fix things after the fact and send back/ forth to Korea.
Post by: popkorn62 on Fri, 07 July 2017, 11:06:09
I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.
Post by: smittysteve on Fri, 07 July 2017, 11:11:57
Hi guys,
I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.
Ok, so what do you recommend- anyone wanting to check order should open support ticket?
Post by: popkorn62 on Fri, 07 July 2017, 11:27:54
Hi guys,
I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.
Ok, so what do you recommend- anyone wanting to check order should open support ticket?
For now yeah but if you haven't changed anything it should be in your Paypal's transaction comment no?
Post by: Uleoja on Fri, 07 July 2017, 16:00:17
Hi guys,
I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.
What factory is having the delays?
Post by: popkorn62 on Fri, 07 July 2017, 16:18:16
Hi guys,
I did suggest kin to send me the spreadsheet but he's probably too busy to do that? Like it's on his computer instead of his phone? Lol. I know he's calling the factory tomorrow to work on the new shipping date. Hopefully the next GB will be more organized.
What factory is having the delays?
That's what he told me just relay the message to you guys. I know Koreans got their orders already but their GB concluded ~ 5 weeks before GH started?
I think he made 2 separate orders to the factory for Korea and GH.
Post by: kekstee on Fri, 07 July 2017, 17:55:43
Also, what was the site again for tickets? I messaged him once a month ago, but I don't think it's possible to keep track of such a Telegram backlog :D
Post by: popkorn62 on Fri, 07 July 2017, 22:58:29
I know this is the 1800 thread, but is it known where the CPR2 orders are in all of this? Is he doing one after the other or just going by date?
Also, what was the site again for tickets? I messaged him once a month ago, but I don't think it's possible to keep track of such a Telegram backlog :D
You can submit a support ticket at txkeyboards.com
Post by: Mr_BeastQuake on Fri, 07 July 2017, 23:05:11
I know this is the 1800 thread, but is it known where the CPR2 orders are in all of this? Is he doing one after the other or just going by date?
Also, what was the site again for tickets? I messaged him once a month ago, but I don't think it's possible to keep track of such a Telegram backlog :D
You can submit a support ticket at txkeyboards.com
kin paying you popkorn (rhetorical)? I appreciate you being here to give info. Perhaps kin should have a liaison for the next GB like Elton and Duck? I'm not entirely familiar with that relationship so don't crucify me.
Post by: popkorn62 on Sat, 08 July 2017, 14:44:04
I know this is the 1800 thread, but is it known where the CPR2 orders are in all of this? Is he doing one after the other or just going by date?
Also, what was the site again for tickets? I messaged him once a month ago, but I don't think it's possible to keep track of such a Telegram backlog :D
You can submit a support ticket at txkeyboards.com
kin paying you popkorn (rhetorical)? I appreciate you being here to give info. Perhaps kin should have a liaison for the next GB like Elton and Duck? I'm not entirely familiar with that relationship so don't crucify me.
Nope not getting paid just helping him whenever I got time.
Post by: mbw42 on Sat, 08 July 2017, 20:09:05
Post by: DreLLin on Sun, 09 July 2017, 09:47:49
Post by: megaforce on Sun, 09 July 2017, 10:24:47
I can understand that there are delays and manufacturing problemls or something else. I don’t have problems if we have to wait longer than expected but as busy as Kin is he should alsways have the time to drop here one line of text just to inform us that there are problems and delays. His zero information makes me think that he just took our money. It’s really not acceptable to don’t take a minute for an update. I will still wait a few weeks but if we get no updates from him till August I will definitely try to get my money back.You must be new to GH.
Sent from my Nexus 6P using Tapatalk
Post by: Puddsy on Sun, 09 July 2017, 17:57:34
I can understand that there are delays and manufacturing problemls or something else. I don’t have problems if we have to wait longer than expected but as busy as Kin is he should alsways have the time to drop here one line of text just to inform us that there are problems and delays. His zero information makes me think that he just took our money. It’s really not acceptable to don’t take a minute for an update. I will still wait a few weeks but if we get no updates from him till August I will definitely try to get my money back.You must be new to GH.
Sent from my Nexus 6P using Tapatalk
LOL
True
Post by: yokken on Mon, 10 July 2017, 17:30:23
Post by: ricyuyc on Mon, 10 July 2017, 18:07:27
Just because it's normal not to receive much communication doesn't make it acceptable, guys. There may be nothing you can do about it but don't encourage others to become complacent.Once you host a group buying yourself along with your work for living, you may understand.
Post by: DreLLin on Mon, 10 July 2017, 18:34:24
Post by: Puddsy on Mon, 10 July 2017, 18:38:35
I don’t need frequent communication but it’s 6 weeks since his last post and shipping was announced for end of may. As I said I have absolutely no problem with delays but even with a busy work schedule you should always have the 5 minutes to make a post.
As far as I've heard, these should be shipping once exam season is over in Korea. It's a pretty major thing there, and Kin, as a teacher, is probably swamped right now.
This GB is not delayed, even in the first post he says it should ship in the first 2 weeks of July (Today is July 10th). I'd start worrying if we haven't heard anything by August 15th.
Post by: Mr_BeastQuake on Mon, 10 July 2017, 19:18:55
I don’t need frequent communication but it’s 6 weeks since his last post and shipping was announced for end of may. As I said I have absolutely no problem with delays but even with a busy work schedule you should always have the 5 minutes to make a post.
R1 was estimated at 15-30 May. Most people aren't really talking about how the GB is delayed, rather how there hasn't been a one sentence update from kin since the initial shipping estimate was missed. Let's be real honest, we can be as busy as we have ever been in our lives, in 2017 it is real easy to get on the internet and say: GB delayed due to factory issues, estimated ship date moved out to the end of July.
Thankfully, popkorn is filling in the blanks, which is appreciated. I don't have any doubts kin will ship them when he is able to (gets the boards, has time), but people dating back to the beginning of May and probably a little before never got an answer to questions asked.
I don't have any ill-will towards kin and frankly the last update from popkorn illustrates that the not-shipping is due to factory delays. I also don't think it's really fair to treat people who are asking for some kind of communication like they are being petty though.
Post by: duynguyenle on Mon, 10 July 2017, 19:40:58
I don’t need frequent communication but it’s 6 weeks since his last post and shipping was announced for end of may. As I said I have absolutely no problem with delays but even with a busy work schedule you should always have the 5 minutes to make a post.
R1 was estimated at 15-30 May. Most people aren't really talking about how the GB is delayed, rather how there hasn't been a one sentence update from kin since the initial shipping estimate was missed. Let's be real honest, we can be as busy as we have ever been in our lives, in 2017 it is real easy to get on the internet and say: GB delayed due to factory issues, estimated ship date moved out to the end of July.
Thankfully, popkorn is filling in the blanks, which is appreciated. I don't have any doubts kin will ship them when he is able to (gets the boards, has time), but people dating back to the beginning of May and probably a little before never got an answer to questions asked.
I don't have any ill-will towards kin and frankly the last update from popkorn illustrates that the not-shipping is due to factory delays. I also don't think it's really fair to treat people who are asking for some kind of communication like they are being petty though.
I echo the sentiment. While GH works in sometimes weird and wonderful ways, it's perfectly reasonable to want some updates from time to time, I don't think it's fair to just belittle or dismiss out of hand anyone who voices their desire for more frequent updates. I've been through my fair share of GBs and I know how these things usually goes, but communication is important, even if it's just a sentence or two informing of delays and such. I'm grateful for popkorn for helping out with the basic information relay, but really wish Kin would chime in from time to time. Does that mean I'm new to GH? No, I just want groupbuys in general to gradually migrate towards better, more frequent standards of communication.
Post by: TerryMathews on Mon, 10 July 2017, 19:42:52
I don’t need frequent communication but it’s 6 weeks since his last post and shipping was announced for end of may. As I said I have absolutely no problem with delays but even with a busy work schedule you should always have the 5 minutes to make a post.
This GB is not delayed, even in the first post he says it should ship in the first 2 weeks of July (Today is July 10th). I'd start worrying if we haven't heard anything by August 15th.
I was a R1 order And I've not heard from Kin since April 20; I understand delays happen but failing to communicate in his own thread or over Telegram where he was very active when selling these preorders is not very professional.
We're 6 weeks overdue at this point. By no means is it the worst a GB has been delayed, but some communication would be nice.
Post by: Krytone on Mon, 10 July 2017, 22:00:55
I still think he will deliver though :blank:
Post by: popkorn62 on Tue, 11 July 2017, 14:44:32
I got the news from Kin yesterday but was too busy to post it on here.
He will receive all the boards this weekend. Thus, giving him a week to pack lands us at July 24 for shipping estimate.
Post by: kitchenace13 on Tue, 11 July 2017, 14:50:00
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
Post by: duynguyenle on Tue, 11 July 2017, 17:05:52
Hello guys,
I got the news from Kin yesterday but was too busy to post it on here.
He will receive all the boards this weekend. Thus, giving him a week to pack lands us at July 24 for shipping estimate.
:-X Can't wait, thanks for relaying the information popkorn!
Post by: smittysteve on Tue, 11 July 2017, 20:27:37
Hello guys,
I got the news from Kin yesterday but was too busy to post it on here.
He will receive all the boards this weekend. Thus, giving him a week to pack lands us at July 24 for shipping estimate.
Saweet!! Thanks for the update, Popcorn.
Post by: popkorn62 on Tue, 11 July 2017, 22:22:00
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
Not sure if you are the guy who sent a support ticket but I replied to that. Anyway, he found anodizing errors in the TX-CP batches he received and is currently fixing them himself. There's no ETA at this point but I doubt it's taking much longer. I will post an update in that thread when I hear more from kin.
Post by: q1w2e3r4t5z on Wed, 12 July 2017, 01:38:18
Hello guys,Holy moly, this is amazing news!
I got the news from Kin yesterday but was too busy to post it on here.
He will receive all the boards this weekend. Thus, giving him a week to pack lands us at July 24 for shipping estimate.
Post by: kekstee on Wed, 12 July 2017, 05:03:08
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
Got a tracking number for my TXCP R2 board. So I assume he does both boards as they are ready now.
Post by: zekkin on Wed, 12 July 2017, 09:08:20
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
Got a tracking number for my TXCP R2 board. So I assume he does both boards as they are ready now.
Hell yes! Was the tracking number added on PayPal or did it come through something else?
Post by: kitchenace13 on Wed, 12 July 2017, 09:27:19
Not sure if you are the guy who sent a support ticket but I replied to that.
Wasn't me on the support ticket but thanks for the additional information!
Got a tracking number for my TXCP R2 board. So I assume he does both boards as they are ready now.
Fantastic information kekstee!
Post by: kimbles on Fri, 14 July 2017, 16:16:44
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
I got an email confirming my assembly order, hopefully that means the TX-CP kits will be moving soon!
Post by: duynguyenle on Fri, 14 July 2017, 17:37:04
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
Not sure if you are the guy who sent a support ticket but I replied to that. Anyway, he found anodizing errors in the TX-CP batches he received and is currently fixing them himself. There's no ETA at this point but I doubt it's taking much longer. I will post an update in that thread when I hear more from kin.
Hi Popkorn I'm one of the ones here buying the carrying case for the TX1800, but some months ago Kin also said that he would produce similar cases for TX87, are those done yet? I would like to buy a TX87 carrying case (and add it to my TX1800 order to combine shipping for convenience). Is this possible? Or should I wait until the carrying cases for the TX87 is officially announced?
Post by: popkorn62 on Sun, 16 July 2017, 03:12:56
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
Not sure if you are the guy who sent a support ticket but I replied to that. Anyway, he found anodizing errors in the TX-CP batches he received and is currently fixing them himself. There's no ETA at this point but I doubt it's taking much longer. I will post an update in that thread when I hear more from kin.
Hi Popkorn I'm one of the ones here buying the carrying case for the TX1800, but some months ago Kin also said that he would produce similar cases for TX87, are those done yet? I would like to buy a TX87 carrying case (and add it to my TX1800 order to combine shipping for convenience). Is this possible? Or should I wait until the carrying cases for the TX87 is officially announced?
Just submit a support ticket. He can read it too.
Post by: duynguyenle on Mon, 17 July 2017, 16:51:15
He will receive all the boards this weekend.
Hey probably the wrong thread but I'm guessing this is for the TX1800? Any idea if the TXCP is in the same batch or likely to arrive later? Thanks!
Not sure if you are the guy who sent a support ticket but I replied to that. Anyway, he found anodizing errors in the TX-CP batches he received and is currently fixing them himself. There's no ETA at this point but I doubt it's taking much longer. I will post an update in that thread when I hear more from kin.
Hi Popkorn I'm one of the ones here buying the carrying case for the TX1800, but some months ago Kin also said that he would produce similar cases for TX87, are those done yet? I would like to buy a TX87 carrying case (and add it to my TX1800 order to combine shipping for convenience). Is this possible? Or should I wait until the carrying cases for the TX87 is officially announced?
Just submit a support ticket. He can read it too.
Ticket submitted! Hopefully Kin has some free time to respond! :)
Post by: TerryMathews on Mon, 17 July 2017, 17:12:32
"Tx1800v2 shipping day delayed. I am so sorry. I am trying to send asap."
I sent a message back asking for an estimated ship date, but no reply to so far.
Post by: olaf3 on Tue, 18 July 2017, 03:46:34
Post by: q1w2e3r4t5z on Wed, 19 July 2017, 07:34:30
I got a telegram message from Kin today:That's a lot of days that are not tomorrow :( But I'm sure it'll be worth the wait
"Tx1800v2 shipping day delayed. I am so sorry. I am trying to send asap."
I sent a message back asking for an estimated ship date, but no reply to so far.
Post by: kin25 on Wed, 19 July 2017, 10:53:23
I was so busy to solve the problems of keyboards.
But now.. It is not finished.
I thought talking about problems was not good to users.
But now I think users must know about their keyboards.
(Don't worry about your keyboard quality, I will send it after QC)
This time GB is the hardest works for me.
In May
Factory made 100ea tx1800v2 and 50ea txcp.
I found material problems and scratches.
So factory fixed them for a month.
Factory make 100 more tx1800v2.
Factory said they would make 50 more txcp.
Factory made brass plates and brass weight as well.
I found some errors of color and scratches.
Factory fixed them but they failed.
In June
Factory made 150 more brass weight.
But all of them was useless.
Then I found PCB errors.
It is pcb mount hole size problem.
Pcb factory drilled the holes.
They are fixed.
But pcb parts like diodes and usb connectors were broken.
So I had to disolder them and changed parts.
Face of metal gasket was not good.
So I had to polish up by myself.
Fortunately bags did not make a trouble.
Unfortunately my paypal was locked.
So I can't send invoices and refund.
Popkorn62 is helping now.
I sent almost of txcp.
I sent some tx1800v2 to Korean users.
I receive some tx1800v2 today.
I will send them to korean users and GHers.
But they are not enough quantity.
In factory there are more than 100ea tx1800v2 (not good quality)
I asked factory to make more tx1800v2 and txcp.
I want buyers to receive good one.
So I am checking quality.
I am working hard for making good keyboards.
Sorry and thanks.
Post by: Petch on Wed, 19 July 2017, 11:07:50
Post by: smittysteve on Wed, 19 July 2017, 11:14:16
I am so sorry.
I was so busy to solve the problems of keyboards.
But now.. It is not finished.
I thought talking about problems was not good to users.
But now I think users must know about their keyboards.
(Don't worry about your keyboard quality, I will send it after QC)
This time GB is the hardest works for me.
In May
Factory made 100ea tx1800v2 and 50ea txcp.
I found material problems and scratches.
So factory fixed them for a month.
Factory make 100 more tx1800v2.
Factory said they would make 50 more txcp.
Factory made brass plates and brass weight as well.
I found some errors of color and scratches.
Factory fixed them but they failed.
In June
Factory made 150 more brass weight.
But all of them was useless.
Then I found PCB errors.
It is pcb mount hole size problem.
Pcb factory drilled the holes.
They are fixed.
But pcb parts like diodes and usb connectors were broken.
So I had to disolder them and changed parts.
Face of metal gasket was not good.
So I had to polish up by myself.
Fortunately bags did not make a trouble.
Unfortunately my paypal was locked.
So I can't send invoices and refund.
Popkorn62 is helping now.
I sent almost of txcp.
I sent some tx1800v2 to Korean users.
I receive some tx1800v2 today.
I will send them to korean users and GHers.
But they are not enough quantity.
In factory there are more than 100ea tx1800v2 (not good quality)
I asked factory to make more tx1800v2 and txcp.
I want buyers to receive good one.
So I am checking quality.
I am working hard for making good keyboards.
Sorry and thanks.
Wow, thank you for that update- had no idea it's been that rough. We are all quite good at handling delays, so no worries there. Personally, with buys I am involved in, I am emotionally invested so part of the process is experiencing these bumps with the group buy leader. It is a lot like Kickstarter, you want the project to succeed and get your thing, but please know we are also rooting for you- we want you to succeed too. :) Pretty sure almost all of us would choose great boards > hitting timeline any day.
Thanks for all the work on these keyboards, Kin. We know the beauties that will be delivered will be well worth the wait and we appreciate you holding the quality standard up.
Post by: aznreaper on Wed, 19 July 2017, 11:34:25
Also, what's the easiest way to buy a couple of those bags? I would like one for a tx75 and txcp (tx1800 if I get one I guess as well) if possible. He said something about people proxying them from the states didn't he?
Post by: duynguyenle on Wed, 19 July 2017, 12:14:39
I am so sorry.
I was so busy to solve the problems of keyboards.
But now.. It is not finished.
I thought talking about problems was not good to users.
But now I think users must know about their keyboards.
(Don't worry about your keyboard quality, I will send it after QC)
This time GB is the hardest works for me.
In May
Factory made 100ea tx1800v2 and 50ea txcp.
I found material problems and scratches.
So factory fixed them for a month.
Factory make 100 more tx1800v2.
Factory said they would make 50 more txcp.
Factory made brass plates and brass weight as well.
I found some errors of color and scratches.
Factory fixed them but they failed.
In June
Factory made 150 more brass weight.
But all of them was useless.
Then I found PCB errors.
It is pcb mount hole size problem.
Pcb factory drilled the holes.
They are fixed.
But pcb parts like diodes and usb connectors were broken.
So I had to disolder them and changed parts.
Face of metal gasket was not good.
So I had to polish up by myself.
Fortunately bags did not make a trouble.
Unfortunately my paypal was locked.
So I can't send invoices and refund.
Popkorn62 is helping now.
I sent almost of txcp.
I sent some tx1800v2 to Korean users.
I receive some tx1800v2 today.
I will send them to korean users and GHers.
But they are not enough quantity.
In factory there are more than 100ea tx1800v2 (not good quality)
I asked factory to make more tx1800v2 and txcp.
I want buyers to receive good one.
So I am checking quality.
I am working hard for making good keyboards.
Sorry and thanks.
Thank you Kin for the update! Sorry to hear you are having some difficulties with the factory! Hope you are able to solve the issues. I don't mind waiting a bit more :)
Post by: kitchenace13 on Wed, 19 July 2017, 14:05:37
Post by: maximm on Thu, 20 July 2017, 02:41:30
popkorn said that the bags for TX-87 will be ready in a month, and i will wait for one for mine.
Post by: Krytone on Thu, 20 July 2017, 03:29:06
Good to hear from you Kin, any news is always good news here. Even if it's about delays or factory screwing up, we like to hear about it. Anyone know if kin is still taking orders for tx1800's, I might be interested in the new couple weeks due to pay cycles if they're still available.
Also, what's the easiest way to buy a couple of those bags? I would like one for a tx75 and txcp (tx1800 if I get one I guess as well) if possible. He said something about people proxying them from the states didn't he?
i asked in telegram about tx1800v2 extras but sadly, there are none. :'( :'( :'(
Post by: yokken on Thu, 20 July 2017, 09:48:00
Post by: megaforce on Thu, 20 July 2017, 10:24:41
Post by: alienman82 on Thu, 20 July 2017, 11:42:15
Post by: Puddsy on Thu, 20 July 2017, 16:19:59
Post by: yokken on Thu, 20 July 2017, 18:12:30
Okay, I swapped the plate in and put the feet on... what a gorgeous case. It's hard to capture the smooth flat dark grey. It has a wonderful sheen to it and goes so well with Carbon. I suspect LightCycle and Orange on Dolch will look great as well! I didn't take any photos of the brushed brass but it's a looker.
(http://i.imgur.com/4basqan.jpg)
(http://i.imgur.com/ix00BEs.jpg)
(http://i.imgur.com/XBhL4Up.jpg)
(http://i.imgur.com/xfWnv3f.jpg)
Thanks again Kin, amazing quality.
Post by: bmilcs on Fri, 21 July 2017, 06:33:17
Post by: Uleoja on Fri, 21 July 2017, 08:38:26
I am so sorry.
I was so busy to solve the problems of keyboards.
But now.. It is not finished.
I thought talking about problems was not good to users.
But now I think users must know about their keyboards.
(Don't worry about your keyboard quality, I will send it after QC)
This time GB is the hardest works for me.
In May
Factory made 100ea tx1800v2 and 50ea txcp.
I found material problems and scratches.
So factory fixed them for a month.
Factory make 100 more tx1800v2.
Factory said they would make 50 more txcp.
Factory made brass plates and brass weight as well.
I found some errors of color and scratches.
Factory fixed them but they failed.
In June
Factory made 150 more brass weight.
But all of them was useless.
Then I found PCB errors.
It is pcb mount hole size problem.
Pcb factory drilled the holes.
They are fixed.
But pcb parts like diodes and usb connectors were broken.
So I had to disolder them and changed parts.
Face of metal gasket was not good.
So I had to polish up by myself.
Fortunately bags did not make a trouble.
Unfortunately my paypal was locked.
So I can't send invoices and refund.
Popkorn62 is helping now.
I sent almost of txcp.
I sent some tx1800v2 to Korean users.
I receive some tx1800v2 today.
I will send them to korean users and GHers.
But they are not enough quantity.
In factory there are more than 100ea tx1800v2 (not good quality)
I asked factory to make more tx1800v2 and txcp.
I want buyers to receive good one.
So I am checking quality.
I am working hard for making good keyboards.
Sorry and thanks.
Kin,. Thank you for everything. Please don't stress. If it takes longer for a better product it takes longer. Nothing we can do about that. I've been wanting this board for a very long time and I am very glad you even offered a V2. Good luck!
Post by: ricyuyc on Fri, 21 July 2017, 09:42:54
Post by: TerryMathews on Wed, 26 July 2017, 08:13:23
The first post seems to imply that $280 is the TX1800 case price and that the PCB is sold separately. The website though calls it "extra PCB" implying one comes with the case. Which is correct?
Post by: kin25 on Wed, 26 July 2017, 08:16:42
Can you clarify something for me:
The first post seems to imply that $280 is the TX1800 case price and that the PCB is sold separately. The website though calls it "extra PCB" implying one comes with the case. Which is correct?
Only case $280 (included ss weight and acrylic gasket)
Post by: TerryMathews on Wed, 26 July 2017, 08:48:47
Post by: avid on Wed, 26 July 2017, 12:24:25
Post by: falola on Wed, 26 July 2017, 15:31:21
Post by: avid on Wed, 26 July 2017, 16:17:28
Post by: popkorn62 on Fri, 28 July 2017, 00:28:20
K. I know you're not taking orders on the web site yet but whoever's in charge of it needs to look at how things are worded before it goes live.
Fixed. I was confused a bit but next GB I will work with kin on it first.
Post by: diiiP on Sat, 29 July 2017, 04:49:27
Yes, I am a very happy men :p
Post by: falola on Sat, 29 July 2017, 06:06:40
Show Image(http://i.imgur.com/3aSNOVr.jpg)
Yes, I am a very happy men :p
Damn i'm jealous!!!! I really really hope he has extras or will do a R3 so i can get one. This time I will make sure not to miss it
Post by: poolside on Sat, 29 July 2017, 07:59:51
Show Image(http://i.imgur.com/3aSNOVr.jpg)
Yes, I am a very happy men :p
Nice picture, the Sky Dolch - Dolch board looks very good. :thumb:
Is that a brass plate on the board with the black top? Did you build it yourself?
Post by: diiiP on Sat, 29 July 2017, 08:48:54
Show Image(http://i.imgur.com/3aSNOVr.jpg)
Yes, I am a very happy men :p
Nice picture, the Sky Dolch - Dolch board looks very good. :thumb:
Is that a brass plate on the board with the black top? Did you build it yourself?
Yes, order the black one with brass plate and the grey one with SS Plate.
And some more Photos for anyone interested: http://imgur.com/a/Jl5Yv (http://imgur.com/a/Jl5Yv) :)
Post by: maximm on Sat, 29 July 2017, 10:37:08
Yes, order the black one with brass plate and the grey one with SS Plate.
And some more Photos for anyone interested: http://imgur.com/a/Jl5Yv (http://imgur.com/a/Jl5Yv) :)
That is so gorgeous, truly amazing with ISO on top!
Post by: losthumans on Sat, 29 July 2017, 12:12:35
So nice! What is the key set on the top one?Show Image(http://i.imgur.com/3aSNOVr.jpg)
Yes, I am a very happy men :p
Nice picture, the Sky Dolch - Dolch board looks very good. :thumb:
Is that a brass plate on the board with the black top? Did you build it yourself?
Yes, order the black one with brass plate and the grey one with SS Plate.
And some more Photos for anyone interested: http://imgur.com/a/Jl5Yv (http://imgur.com/a/Jl5Yv) :)
Post by: diiiP on Sat, 29 July 2017, 13:16:26
So nice! What is the key set on the top one?Show Image(http://i.imgur.com/3aSNOVr.jpg)
Yes, I am a very happy men :p
Nice picture, the Sky Dolch - Dolch board looks very good. :thumb:
Is that a brass plate on the board with the black top? Did you build it yourself?
Yes, order the black one with brass plate and the grey one with SS Plate.
And some more Photos for anyone interested: http://imgur.com/a/Jl5Yv (http://imgur.com/a/Jl5Yv) :)
Fist: Dolch alphas & DolchReborn mods
Second: Carbon Alphas & Dolch mods
Post by: yokken on Sat, 29 July 2017, 13:55:50
Post by: poolside on Sat, 29 July 2017, 14:18:47
Show Image(http://i.imgur.com/3aSNOVr.jpg)
Yes, I am a very happy men :p
Nice picture, the Sky Dolch - Dolch board looks very good. :thumb:
Is that a brass plate on the board with the black top? Did you build it yourself?
Yes, order the black one with brass plate and the grey one with SS Plate.
And some more Photos for anyone interested: http://imgur.com/a/Jl5Yv (http://imgur.com/a/Jl5Yv) :)
Thanks for sharing them :thumb:
Post by: Hexterdude on Sat, 29 July 2017, 15:51:45
Post by: losthumans on Sat, 29 July 2017, 20:03:11
Looks great thanks for the info!!!So nice! What is the key set on the top one?Show Image(http://i.imgur.com/3aSNOVr.jpg)
Yes, I am a very happy men :p
Nice picture, the Sky Dolch - Dolch board looks very good. :thumb:
Is that a brass plate on the board with the black top? Did you build it yourself?
Yes, order the black one with brass plate and the grey one with SS Plate.
And some more Photos for anyone interested: http://imgur.com/a/Jl5Yv (http://imgur.com/a/Jl5Yv) :)
Fist: Dolch alphas & DolchReborn mods
Second: Carbon Alphas & Dolch mods
Post by: q1w2e3r4t5z on Sun, 30 July 2017, 14:30:50
Post by: popkorn62 on Mon, 31 July 2017, 10:41:44
I opened a support ticket, can you please check?
Responded and resolved.
Post by: Uleoja on Mon, 31 July 2017, 12:49:57
https://zealpc.net/collections/accessories/products/zealstabilizers (https://zealpc.net/collections/accessories/products/zealstabilizers)
Post by: smittysteve on Mon, 31 July 2017, 13:00:47
After doing some research it looks like the PCB and plate support PCB mounted stabs. is this correct? Does anybody know if the screw-in style stabs will work with this setup? Also, do we have an ETA on shipping to the states for the 1800 yet? Any word from the factories regarding the re-machined cases? Thanks in advanced.
https://zealpc.net/collections/accessories/products/zealstabilizers (https://zealpc.net/collections/accessories/products/zealstabilizers)
Hello,
The TX boards definitely do support PCB-mounted stabs. I'm typing on a TX-CP with Zeal screw-in stabs right now, and they are phenomenal. Costly, but dang nice- would recommend! (Side note, not many high-end customs will force you to plate-mounted stabs. You're safe to stock up on Zeal's or Cherry stabs when you buy because just a guess, but if this is your first big build... there will be others... ;) )
Enjoy the build. Feel free to reach out if you have other questions as you get going.
Post by: falola on Mon, 31 July 2017, 13:51:20
Post by: Puddsy on Mon, 31 July 2017, 15:52:18
Any word when / if there are any extras? I really want to get my hands on one of these!!
there will be extras
not sure when
Post by: Uleoja on Mon, 31 July 2017, 19:08:47
After doing some research it looks like the PCB and plate support PCB mounted stabs. is this correct? Does anybody know if the screw-in style stabs will work with this setup? Also, do we have an ETA on shipping to the states for the 1800 yet? Any word from the factories regarding the re-machined cases? Thanks in advanced.
https://zealpc.net/collections/accessories/products/zealstabilizers (https://zealpc.net/collections/accessories/products/zealstabilizers)
Hello,
The TX boards definitely do support PCB-mounted stabs. I'm typing on a TX-CP with Zeal screw-in stabs right now, and they are phenomenal. Costly, but dang nice- would recommend! (Side note, not many high-end customs will force you to plate-mounted stabs. You're safe to stock up on Zeal's or Cherry stabs when you buy because just a guess, but if this is your first big build... there will be others... ;) )
Enjoy the build. Feel free to reach out if you have other questions as you get going.
Thanks for the reply back! I guess I'm gonna have to order stabs and the zeals I wanted! And I for sure will reach out if I have any queations! Thanks again.
Post by: Petch on Mon, 31 July 2017, 19:27:54
Post by: bmilcs on Tue, 01 August 2017, 18:15:29
Paypal is locked and loaded!@
PS: What is the best way to stay on track of group buys? I'm very busy and can't always find time to check in daily. I really want to get in on a TKL/TX-CP build soon.
Post by: Puddsy on Tue, 01 August 2017, 19:44:46
I am dying for the TX-CP. Please let me know if / when there will be extras!
Paypal is locked and loaded!@
PS: What is the best way to stay on track of group buys? I'm very busy and can't always find time to check in daily. I really want to get in on a TKL/TX-CP build soon.
best way is to check the forum as often as you can
Post by: ricyuyc on Wed, 02 August 2017, 00:29:08
Post by: popkorn62 on Wed, 02 August 2017, 10:29:50
Post by: Petch on Wed, 02 August 2017, 10:39:31
I got word that TX1800 v2 is delayed for 2 months. Kin is working with the factory to make that time length shorter but nothing is guaranteed. We really appreciate your patience. If you would like to be notified for the TXCP b-stock please register on txkeyboards.com. I will send an email to all users at that point. FCFS. Quantity will be very limited.
Is there anyway we can 'refresh' out paypal safety net by getting a refund followed immediately by another invoice? I wouldn't mind, but considering my order totaled nearly $1000 and I'm not even sure if the TX75 I bought exists anymore...
Post by: popkorn62 on Wed, 02 August 2017, 10:43:08
I got word that TX1800 v2 is delayed for 2 months. Kin is working with the factory to make that time length shorter but nothing is guaranteed. We really appreciate your patience. If you would like to be notified for the TXCP b-stock please register on txkeyboards.com. I will send an email to all users at that point. FCFS. Quantity will be very limited.
Is there anyway we can 'refresh' out paypal safety net by getting a refund followed immediately by another invoice? I wouldn't mind, but considering my order totaled nearly $1000 and I'm not even sure if the TX75 I bought exists anymore...
Petch,
I was about to reply to your ticket. Kin only needs to weigh everything to give you the final amount. He didn't charge you enough for shipping. Yes, your TX75 will be included.
Right now, he will be on a short vacation until next Monday.
I can assure you that your order will be delivered. If you would like a refund, I will talk to kin.
Post by: Petch on Wed, 02 August 2017, 10:46:16
I got word that TX1800 v2 is delayed for 2 months. Kin is working with the factory to make that time length shorter but nothing is guaranteed. We really appreciate your patience. If you would like to be notified for the TXCP b-stock please register on txkeyboards.com. I will send an email to all users at that point. FCFS. Quantity will be very limited.
Is there anyway we can 'refresh' out paypal safety net by getting a refund followed immediately by another invoice? I wouldn't mind, but considering my order totaled nearly $1000 and I'm not even sure if the TX75 I bought exists anymore...
Petch,
I was about to reply to your ticket. Kin only needs to weigh everything to give you the final amount. He didn't charge you enough for shipping. Yes, your TX75 will be included.
Right now, he will be on a short vacation until next Monday.
I can assure you that your order will be delivered. If you would like a refund, I will talk to kin.
Okay, that's reassuring. I don't want a refund but in 2 months the paypal window will be almost closed. If it gets to that point and they haven't shipped, I might have to ask for a refund then just because of the large cost
Post by: ricyuyc on Wed, 02 August 2017, 10:48:39
I got word that TX1800 v2 is delayed for 2 months. Kin is working with the factory to make that time length shorter but nothing is guaranteed. We really appreciate your patience. If you would like to be notified for the TXCP b-stock please register on txkeyboards.com. I will send an email to all users at that point. FCFS. Quantity will be very limited.Does the 2 months delay affect all 1800v2 R1 and R2 orders? Or only affect R2?
Post by: MAR82 on Wed, 02 August 2017, 10:58:24
I am willing to pay a bit extra to be sure my money is safe
And like ricyuyc was asking is the delay on R1 and R2?
Post by: kin25 on Wed, 02 August 2017, 11:06:10
1800bag and cpbag is 1.3kg
87bag and 75bag is 1.0kg
Adding extra bag increase shipping cost $13 to US.
Bag($30)+Shipping($13)=$43
Next time I will make the bag lighter.
Post by: popkorn62 on Wed, 02 August 2017, 11:06:31
I got word that TX1800 v2 is delayed for 2 months. Kin is working with the factory to make that time length shorter but nothing is guaranteed. We really appreciate your patience. If you would like to be notified for the TXCP b-stock please register on txkeyboards.com. I will send an email to all users at that point. FCFS. Quantity will be very limited.
Is there anyway we can 'refresh' out paypal safety net by getting a refund followed immediately by another invoice? I wouldn't mind, but considering my order totaled nearly $1000 and I'm not even sure if the TX75 I bought exists anymore...
Petch,
I was about to reply to your ticket. Kin only needs to weigh everything to give you the final amount. He didn't charge you enough for shipping. Yes, your TX75 will be included.
Right now, he will be on a short vacation until next Monday.
I can assure you that your order will be delivered. If you would like a refund, I will talk to kin.
Okay, that's reassuring. I don't want a refund but in 2 months the paypal window will be almost closed. If it gets to that point and they haven't shipped, I might have to ask for a refund then just because of the large cost
I completely understand your concern. I just want you to know that kin has been stressed out a lot by this GB as well. I told him TX1800 is cursed tbh because the first one also ran into many problems. He relied on the factory to do QC but turned out they're not competent enough to do that.
He will NOT run away with your money. That's all I gotta say. I have enough money in my account collected from TXCP buyers to remedy the situation if it's taking a bad turn.
Post by: popkorn62 on Wed, 02 August 2017, 11:07:09
I got word that TX1800 v2 is delayed for 2 months. Kin is working with the factory to make that time length shorter but nothing is guaranteed. We really appreciate your patience. If you would like to be notified for the TXCP b-stock please register on txkeyboards.com. I will send an email to all users at that point. FCFS. Quantity will be very limited.Does the 2 months delay affect all 1800v2 R1 and R2 orders? Or only affect R2?
It will affect both rounds.
Post by: popkorn62 on Wed, 02 August 2017, 11:08:04
Yes I would also like a refund and be reinvoiced just for more PayPal protection. The last time I gave so much money to a GB runner and it took this long was to Ivan and we all know how that ended. For that GB we also had a lot of people telling us we could trust Ivan
I am willing to pay a bit extra to be sure my money is safe
And like ricyuyc was asking is the delay on R1 and R2?
If you're the one who paid with eCheck, Paypal still has NOT done processed your payment. I will refund you immediately after they do.
Post by: MAR82 on Wed, 02 August 2017, 11:19:15
Yes I would also like a refund and be reinvoiced just for more PayPal protection. The last time I gave so much money to a GB runner and it took this long was to Ivan and we all know how that ended. For that GB we also had a lot of people telling us we could trust Ivan
I am willing to pay a bit extra to be sure my money is safe
And like ricyuyc was asking is the delay on R1 and R2?
If you're the one who paid with eCheck, Paypal still has NOT done processed your payment. I will refund you immediately after they do.
Hi Popkorn, no I'm not the person that paid by eCheck. I paid by PayPal on R1.
It's not my intention whatsoever to cause more stress for you or for Kin, it's just that I got burned hard with Ivan and I just want to protect myself this time around.
I know this can cause more fees and work for you guys, so please reinvoice me a bit more for the extra work and any fees that might be charged
Post by: kin25 on Wed, 02 August 2017, 11:32:27
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
Post by: dubious on Wed, 02 August 2017, 12:09:53
Don't worry.
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
you could setup a store on shopify.com or somewhere else. I'd be interested in lots of those items!
Post by: MAR82 on Wed, 02 August 2017, 12:16:39
Don't worry.
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
I have no reason not to trust you.
This whole situation just makes me feel nervous and frustrated, but I'm sure you are not feeling better with all the issues
Don't worry.
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
you could setup a store on shopify.com or somewhere else. I'd be interested in lots of those items!
That comment doesn't help me feel less nervous
Post by: duynguyenle on Wed, 02 August 2017, 12:28:06
Don't worry.
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
Sorry for the issues you're having and hope you can sort things out soon! I'll patiently wait because I sure want to buy some extra PCBs, plates, films and bags. :thumb:
Please keep us updated of your progress. Sometimes it's good to get some updates even if it's bad news :p
Post by: kidcongo on Wed, 02 August 2017, 12:42:35
Don't worry.
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
Any extras there?
Is there a chance those of us who submitted a form but weren't invoiced will get a chance to get in on R2?
These keyboards look amazing!
Post by: Berzerker on Wed, 02 August 2017, 12:43:47
Don't worry.
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
I have no reason not to trust you.
This whole situation just makes me feel nervous and frustrated, but I'm sure you are not feeling better with all the issuesDon't worry.
I can't run away.
Because I have many keyboards parts in my warehouse.
Where can I sell them all?
Keyboard bag 1000ea
PCB 1200ea
Wood palmrest 500ea
Alu housing 400ea
Switch 300sets
Film 1000sets
Keycaps 1000sets
you could setup a store on shopify.com or somewhere else. I'd be interested in lots of those items!
That comment doesn't help me feel less nervous
It's natural for you to feel nervous about stuff like this. From personal experience I can say that Kin has come through every time I've dealt with him, from delays to even sending products before I've paid for them, he is the best group buy organizer this community has, so while I understand why you can be nervous, there will 100% be a light at the end of the tunnel.
Post by: kawasaki161 on Wed, 02 August 2017, 12:46:38
Post by: popkorn62 on Wed, 02 August 2017, 13:02:14
Okay, popkorn, PLEASE update the security features of the site. The fact that it is sending plain text passwords to users in the confirmation mail shows that something is going totally wrong.
Yes. I just haven't got time to update both the SSL encryption and that yet...
Post by: Petch on Wed, 02 August 2017, 15:33:08
Post by: dubious on Wed, 02 August 2017, 15:39:17
Post by: Uleoja on Wed, 02 August 2017, 15:47:12
Post by: popkorn62 on Wed, 02 August 2017, 15:56:47
There should be no way of even having access to plain text passwords - they should be strongly hashed,salted and forgotten about
It's the stupid option that I forgot to turn off. Fixed it now. Obviously no payment methods will be stored. We will handle all transactions through Paypal only.
Post by: BOK on Thu, 10 August 2017, 14:02:43
Post by: mbw42 on Thu, 10 August 2017, 14:16:47
acrylic plate
Nice, how does it feel compared to aluminum/steel/brass?
Post by: kin25 on Thu, 10 August 2017, 14:22:03
acrylic plate
Nice, how does it feel compared to aluminum/steel/brass?
Like non-plate.
Lighter than alu plate.
Only Ansi winkey and winkeyless layout.
BOK designed them in small quantity.
$35
Post by: duynguyenle on Thu, 10 August 2017, 15:01:47
acrylic plate
Nice, how does it feel compared to aluminum/steel/brass?
Like non-plate.
Lighter than alu plate.
Only Ansi winkey and winkeyless layout.
BOK designed them in small quantity.
$35
KIN PLEASE LET ME ADD ONE OF THESE TO MY ORDER!!! HOW DO I GO ABOUT GETTING IT? :eek:
Post by: kconfire on Fri, 11 August 2017, 08:46:21
The keyboard looks so good- can I still put in a pre-order for TX1800v2 or is it too late now?
Anybody with Titanium Gray willing to sell a spot for me with the acrylic plate? :thumb:
Post by: kitchenace13 on Fri, 11 August 2017, 09:24:05
Anybody with Titanium Gray willing to sell a spot for me with the acrylic plate? :thumb:
I'm not sure about the 1800 but I have a TXCP Titanium Gray on order and, due to anodizing issues, a bunch of orders with that specific color are delayed I believe 1-2 months. Just FYI
Post by: kconfire on Fri, 11 August 2017, 09:33:10
Anybody with Titanium Gray willing to sell a spot for me with the acrylic plate? :thumb:
I'm not sure about the 1800 but I have a TXCP Titanium Gray on order and, due to anodizing issues, a bunch of orders with that specific color are delayed I believe 1-2 months. Just FYI
Is it winkey or winkeyless?
I may be interested in TX-CP Titanium Gray.
Are you willing to sell yours once you get it?
Let me know. :)
Post by: kitchenace13 on Fri, 11 August 2017, 09:37:14
Are you willing to sell yours once you get it?
Oh, sorry no I'm not willing to sell it :), I just wanted to let you know that TiGray supplies are back logged at least for the TXCP.
Post by: odd on Fri, 11 August 2017, 13:18:21
Post by: Uleoja on Fri, 11 August 2017, 16:20:53
Please let me know.
Post by: nevaenuf on Sat, 12 August 2017, 10:14:29
Post by: Uleoja on Sat, 12 August 2017, 23:05:58
Post by: popkorn62 on Sun, 13 August 2017, 19:13:58
I submitted a ticket. Ticket Number: DF34020332
Please let me know.
We've replied to your ticket :)
Post by: ricyuyc on Mon, 14 August 2017, 04:11:29
Beautiful v2 built from kbdlab kr
http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4585144 (http://kbdlab.co.kr/index.php?mid=board_Lsno50&document_srl=4585144)
[attachimg=1]
Post by: Uleoja on Mon, 14 August 2017, 13:40:50
I submitted a ticket. Ticket Number: DF34020332
Please let me know.
We've replied to your ticket :)
I am not seeing anything. Should I be looking on the website in a different area or an email?
Post by: gr4v3m4n on Wed, 16 August 2017, 03:02:27
Post by: Uleoja on Fri, 01 September 2017, 11:30:33
Post by: popkorn62 on Fri, 01 September 2017, 14:48:00
Anymore updates for the US gh buyers?
No update so far. We're still looking at October at the moment.
Thank you so much for your patience. Site is currently under maintenance and building a Korean layout for Kin so please shoot me a pm if you want any changes regarding your order.
Post by: Miotch92 on Sat, 09 September 2017, 02:55:25
Sent from my SM-G935T using Tapatalk
Post by: unmuscular_michael on Sat, 16 September 2017, 12:00:40
Post by: maximm on Sat, 16 September 2017, 15:06:48
Post by: iamtootallforthis on Sat, 16 September 2017, 15:38:56
Post by: zoomwalt on Sun, 17 September 2017, 14:44:53
I need one
yeah if it goes up for another round, I'm down to get another. I really want one in red.
Post by: duynguyenle on Sun, 17 September 2017, 17:02:44
Kin told me on the 6th september they finished CNC and were off to ano.
Good news!
Post by: Uleoja on Mon, 18 September 2017, 21:18:18
Kin told me on the 6th september they finished CNC and were off to ano.
Sweet! I'm getting pumped again.
Post by: Prankk on Wed, 20 September 2017, 13:15:42
Post by: kimbles on Wed, 20 September 2017, 14:44:58
So I jumped in one of these and am super excited, but I have a question. Will this come pre-programmed with a default layout or no?
Yeah, the Leeku PCB I have came with the default 1800 layout from cherry boards.
Post by: Pragmatizm on Thu, 21 September 2017, 10:52:31
Post by: ihalatch on Mon, 25 September 2017, 21:13:02
Post by: Puddsy on Mon, 25 September 2017, 21:20:25
Any update? I'm still waiting for my TX1800V2 - Round 1???
They're in ano, I think.
Post by: maximm on Tue, 26 September 2017, 00:36:23
Any update? I'm still waiting for my TX1800V2 - Round 1???
Kin told me they are still in ano.
Post by: popkorn62 on Tue, 26 September 2017, 10:55:02
Post by: laughatpain on Tue, 26 September 2017, 11:50:52
Keyboards are expected to be sent out in mid-Oct. The wait is nearly over guys. Cheers!
Does Kin still have extra bags we can add to our order? If so, what sizes?
Post by: popkorn62 on Tue, 26 September 2017, 14:42:56
Keyboards are expected to be sent out in mid-Oct. The wait is nearly over guys. Cheers!
Does Kin still have extra bags we can add to our order? If so, what sizes?
Yes, you can add bags to your order but heads up shipping will be more.
Post by: nevaenuf on Tue, 26 September 2017, 16:43:02
Keyboards are expected to be sent out in mid-Oct. The wait is nearly over guys. Cheers!
Does Kin still have extra bags we can add to our order? If so, what sizes?
Yes, you can add bags to your order but heads up shipping will be more.
What's the best way to do that?
Post by: ErectedLine on Tue, 26 September 2017, 20:11:12
Post by: Puddsy on Tue, 26 September 2017, 22:48:44
Keyboards are expected to be sent out in mid-Oct. The wait is nearly over guys. Cheers!
Does Kin still have extra bags we can add to our order? If so, what sizes?
Yes, you can add bags to your order but heads up shipping will be more.
What's the best way to do that?
message kin on telegram
Post by: popkorn62 on Wed, 27 September 2017, 01:44:56
Keyboards are expected to be sent out in mid-Oct. The wait is nearly over guys. Cheers!
Does Kin still have extra bags we can add to our order? If so, what sizes?
Yes, you can add bags to your order but heads up shipping will be more.
What's the best way to do that?
You guys can message kin thru kakao or tele.
Post by: goodeyesniper85 on Wed, 27 September 2017, 10:41:01
I'm looking to possibly sell my spot. Is that something I handle through you Popkorn or do I just need to find someone?possibly interested depending on specs of what was ordered and what not
Post by: alienman82 on Wed, 27 September 2017, 11:55:31
Post by: ErectedLine on Wed, 27 September 2017, 12:09:39
I'm looking to possibly sell my spot. Is that something I handle through you Popkorn or do I just need to find someone?possibly interested depending on specs of what was ordered and what not
It's a black Case with Brass weight and plate. Metal Gaskets and a Carrying Case
Post by: roostrc0gburn on Wed, 27 September 2017, 17:14:54
I'm looking to possibly sell my spot. Is that something I handle through you Popkorn or do I just need to find someone?possibly interested depending on specs of what was ordered and what not
It's a black Case with Brass weight and plate. Metal Gaskets and a Carrying Case
still looking for a spot
Post by: sythie on Sun, 01 October 2017, 21:51:27
Post by: mr scooty on Tue, 03 October 2017, 15:26:33
Post by: Jae-3soteric on Tue, 03 October 2017, 18:30:03
Sent from my iPhone using Tapatalk
Post by: popkorn62 on Fri, 06 October 2017, 11:59:02
Still no update because it’s full moon festival in Korea and I believe kin is on vacation. However, per my last post, he was looking at mid-Oct to late-Oct for fulfillment to begin.
Also, txkeyboards.com is up and running. Please go there to submit tickets since I barely check reddit or gh now. I’d appreciate any feedbacks/errors.
Post by: seedvd on Tue, 10 October 2017, 09:43:21
Post by: longnt on Tue, 10 October 2017, 10:56:14
Post by: popkorn62 on Tue, 10 October 2017, 14:06:15
I am tired of holding off kin25 over $100 refund that was more than one year ago on tx1800 one round preorder. I tried to contact him thru pm and his email address. Could you please help me with that ?
You meant tx1800 v1? Damn that’s a long time ago. He’s still away on vacation so I’ll ask him when he’s back then I can refund you through my paypal.
Post by: ihalatch on Tue, 10 October 2017, 19:03:42
Post by: avid on Tue, 10 October 2017, 19:33:12
Is it too late to change colour?
Id guess they're anodized already, so best way would be to trade colors with someone else.
Post by: ihalatch on Wed, 11 October 2017, 01:38:13
Keyboards are expected to be sent out in mid-Oct. The wait is nearly over guys. Cheers!
I've got tx1800v2 Preorder R1 red one. When is it going to be shipped? Mine is a red one. I'm looking for a swap with black or titanium grey? Is it too late?
Post by: afrokobe on Wed, 11 October 2017, 10:29:50
Post by: redbanshee on Wed, 11 October 2017, 11:55:31
so can I order a v2 off the site? or should I wait
I dont think it will actually let you add it to a cart.... i cant find the button if its there
Post by: afrokobe on Wed, 11 October 2017, 14:17:26
oh i never got that far lol, I was looking at the optionsso can I order a v2 off the site? or should I wait
I dont think it will actually let you add it to a cart.... i cant find the button if its there
Post by: seedvd on Thu, 12 October 2017, 08:00:55
I am tired of holding off kin25 over $100 refund that was more than one year ago on tx1800 one round preorder. I tried to contact him thru pm and his email address. Could you please help me with that ?
You meant tx1800 v1? Damn that’s a long time ago. He’s still away on vacation so I’ll ask him when he’s back then I can refund you through my paypal.
Yes, v1. I really appreciate your help. Please pm me when you get words from him. Thanks.
Post by: popkorn62 on Fri, 13 October 2017, 09:59:05
I am tired of holding off kin25 over $100 refund that was more than one year ago on tx1800 one round preorder. I tried to contact him thru pm and his email address. Could you please help me with that ?
You meant tx1800 v1? Damn that’s a long time ago. He’s still away on vacation so I’ll ask him when he’s back then I can refund you through my paypal.
Yes, v1. I really appreciate your help. Please pm me when you get words from him. Thanks.
Pm’d
Post by: popkorn62 on Mon, 16 October 2017, 04:09:18
Post by: MAR82 on Mon, 16 October 2017, 04:10:47
Post by: ihalatch on Mon, 16 October 2017, 04:11:21
Post by: Petch on Mon, 16 October 2017, 04:33:00
Kin just told me he is expecting to receive all tx1800 v2 next week.
:-*
What should I do about the extra $30 shipping I think I owe?
Post by: roostrc0gburn on Wed, 18 October 2017, 11:36:33
Post by: popkorn62 on Wed, 18 October 2017, 19:45:01
Kin just told me he is expecting to receive all tx1800 v2 next week.
:-*
What should I do about the extra $30 shipping I think I owe?
Will collect from you soon
======••••======
http://txkeyboards.com/
Post by: popkorn62 on Wed, 18 October 2017, 19:45:41
will we be able to buy extra parts from the website? i would like to pick up another plate & pcb. maybe some other gaskets also
I’m not sure tbh. We’ll see!
======••••======
http://txkeyboards.com/
Post by: popkorn62 on Fri, 20 October 2017, 19:37:40
Kin is inspecting them right now.
======••••======
http://txkeyboards.com/
Post by: Ar556 on Fri, 20 October 2017, 19:43:17
Wish I was around for this group buy. Those look amazing.
Post by: popkorn62 on Fri, 20 October 2017, 19:44:13
Hype! :thumb:
Wish I was around for this group buy. Those look amazing.
There will be extras after gb is fulfilled ;). Register on the website below to receive updates.
======••••======
http://txkeyboards.com/
Post by: popkorn62 on Fri, 20 October 2017, 19:46:29
(https://uploads.tapatalk-cdn.com/20171021/2adb3c0475d6030c5427b8b675c6a5b0.jpg)
======••••======
http://txkeyboards.com/
Post by: OmegaSupreme on Fri, 20 October 2017, 20:29:28
Hype! :thumb:
Wish I was around for this group buy. Those look amazing.
There will be extras after gb is fulfilled ;). Register on the website below to receive updates.
======••••======
http://txkeyboards.com/
Will the extras be “ B stock” or regular ones?
Post by: pixelpusher on Fri, 20 October 2017, 22:12:44
Hype! :thumb:
Wish I was around for this group buy. Those look amazing.
There will be extras after gb is fulfilled ;). Register on the website below to receive updates.
======••••======
http://txkeyboards.com/
Will the extras be “ B stock” or regular ones?
I tried to register on the website, but I'm not sure it worked. It just took me back to the home page when I submitted it.
Post by: popkorn62 on Fri, 20 October 2017, 22:20:19
Hype! :thumb:
Wish I was around for this group buy. Those look amazing.
There will be extras after gb is fulfilled ;). Register on the website below to receive updates.
======••••======
http://txkeyboards.com/
Will the extras be “ B stock” or regular ones?
I tried to register on the website, but I'm not sure it worked. It just took me back to the home page when I submitted it.
Please click log in on the top and fill out the form. The bottom is for newsletter only.
Extras will be both regular and b-stock i believe
======••••======
http://txkeyboards.com/
Post by: pixelpusher on Sat, 21 October 2017, 00:23:39
Post by: smittysteve on Sat, 21 October 2017, 00:30:24
Post by: popkorn62 on Sat, 21 October 2017, 02:07:45
Okay I created an account and activated it with the email link. Is that all I need to do?
Yes, you’re all set. Last time there were extras I also sent out a mass email!
(https://uploads.tapatalk-cdn.com/20171021/34ea137e758aaf5328c8f2dda13d2aaa.jpg)(https://uploads.tapatalk-cdn.com/20171021/1a72021d2ba5e09902f8bef0aa727a4a.jpg)
======••••======
http://txkeyboards.com/
Post by: Puddsy on Sat, 21 October 2017, 02:16:59
Okay I created an account and activated it with the email link. Is that all I need to do?
Yes, you’re all set. Last time there were extras I also sent out a mass email!Show Image(https://uploads.tapatalk-cdn.com/20171021/34ea137e758aaf5328c8f2dda13d2aaa.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171021/1a72021d2ba5e09902f8bef0aa727a4a.jpg)
======••••======
http://txkeyboards.com/
holy ****
Post by: poolside on Sat, 21 October 2017, 03:21:06
Okay I created an account and activated it with the email link. Is that all I need to do?
Yes, you’re all set. Last time there were extras I also sent out a mass email!Show Image(https://uploads.tapatalk-cdn.com/20171021/34ea137e758aaf5328c8f2dda13d2aaa.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171021/1a72021d2ba5e09902f8bef0aa727a4a.jpg)
======••••======
http://txkeyboards.com/
What are these cyan boards on the second picture? These look like LZ-Iron bottoms.
Post by: OmegaSupreme on Sat, 21 October 2017, 05:05:26
Okay I created an account and activated it with the email link. Is that all I need to do?
Yes, you’re all set. Last time there were extras I also sent out a mass email!Show Image(https://uploads.tapatalk-cdn.com/20171021/34ea137e758aaf5328c8f2dda13d2aaa.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171021/1a72021d2ba5e09902f8bef0aa727a4a.jpg)
======••••======
http://txkeyboards.com/
What are these cyan boards on the second picture? These look like LZ-Iron bottoms.
You can see part of the top, which looks like the lz-iron as well.
Curious to know what it is.
Post by: Puddsy on Sat, 21 October 2017, 13:14:57
pretty sure kin had a few extras when i last spoke to him
he had LZ ergo as well
could also just be that he had a few 1800s anodized in blue
Post by: maximm on Sat, 21 October 2017, 13:31:27
Post by: OmegaSupreme on Sat, 21 October 2017, 13:32:26
very possible that they're LZ IRON, actually
pretty sure kin had a few extras when i last spoke to him
he had LZ ergo as well
could also just be that he had a few 1800s anodized in blue
Neat.
Did he say the LZ Ergos were for sale?
Post by: Puddsy on Sat, 21 October 2017, 13:33:03
very possible that they're LZ IRON, actually
pretty sure kin had a few extras when i last spoke to him
he had LZ ergo as well
could also just be that he had a few 1800s anodized in blue
Neat.
Did he say the LZ Ergos were for sale?
idk message him on telegram
Post by: OmegaSupreme on Sat, 21 October 2017, 13:34:11
very possible that they're LZ IRON, actually
pretty sure kin had a few extras when i last spoke to him
he had LZ ergo as well
could also just be that he had a few 1800s anodized in blue
Neat.
Did he say the LZ Ergos were for sale?
idk message him on telegram
Try to message him about something else on there but he seems to be busy at the moment. Will keep trying.
Thanks!
Post by: Puddsy on Sat, 21 October 2017, 13:43:27
very possible that they're LZ IRON, actually
pretty sure kin had a few extras when i last spoke to him
he had LZ ergo as well
could also just be that he had a few 1800s anodized in blue
Neat.
Did he say the LZ Ergos were for sale?
idk message him on telegram
Try to message him about something else on there but he seems to be busy at the moment. Will keep trying.
Thanks!
don't forget about the time difference to Korea
Post by: OmegaSupreme on Sat, 21 October 2017, 13:45:09
very possible that they're LZ IRON, actually
pretty sure kin had a few extras when i last spoke to him
he had LZ ergo as well
could also just be that he had a few 1800s anodized in blue
Neat.
Did he say the LZ Ergos were for sale?
idk message him on telegram
Try to message him about something else on there but he seems to be busy at the moment. Will keep trying.
Thanks!
don't forget about the time difference to Korea
Haha yup. I messaged like 5 days ago.
No biggy. I’m not in a rush. Seems like he has his hands full at the moment, judging by the pics.
Post by: popkorn62 on Sat, 21 October 2017, 23:37:23
Also, here’s a peak of the upcoming project(https://uploads.tapatalk-cdn.com/20171022/e7f033838b8fa98e4cc5bfe415f3c123.jpg)(https://uploads.tapatalk-cdn.com/20171022/63d15ac9bdafb65b55c5a36f1f19094f.jpg)(https://uploads.tapatalk-cdn.com/20171022/872638e3e0fe9c2b8e8d9e9a86878618.jpg)(https://uploads.tapatalk-cdn.com/20171022/d7aa7b40bee128e285de6471cb27708f.jpg)
======••••======
http://txkeyboards.com/
Post by: OmegaSupreme on Sat, 21 October 2017, 23:39:35
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Also, here’s a peak of the upcoming projectShow Image(https://uploads.tapatalk-cdn.com/20171022/e7f033838b8fa98e4cc5bfe415f3c123.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/63d15ac9bdafb65b55c5a36f1f19094f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/872638e3e0fe9c2b8e8d9e9a86878618.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/d7aa7b40bee128e285de6471cb27708f.jpg)
======••••======
http://txkeyboards.com/
Ohh what is that??
Post by: Puddsy on Sat, 21 October 2017, 23:48:41
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Also, here’s a peak of the upcoming projectShow Image(https://uploads.tapatalk-cdn.com/20171022/e7f033838b8fa98e4cc5bfe415f3c123.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/63d15ac9bdafb65b55c5a36f1f19094f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/872638e3e0fe9c2b8e8d9e9a86878618.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/d7aa7b40bee128e285de6471cb27708f.jpg)
======••••======
http://txkeyboards.com/
Ohh what is that??
TX60
Any word on whether or not it'll come in HHKB flavor?
Post by: pixelpusher on Sun, 22 October 2017, 00:24:21
Post by: popkorn62 on Sun, 22 October 2017, 00:28:15
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Also, here’s a peak of the upcoming projectShow Image(https://uploads.tapatalk-cdn.com/20171022/e7f033838b8fa98e4cc5bfe415f3c123.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/63d15ac9bdafb65b55c5a36f1f19094f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/872638e3e0fe9c2b8e8d9e9a86878618.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/d7aa7b40bee128e285de6471cb27708f.jpg)
======••••======
http://txkeyboards.com/
Ohh what is that??
TX60
Any word on whether or not it'll come in HHKB flavor?
Yes there will be an HHKB layout as well.
The one below is TX65.
Kin wants to complete the series w as many layouts as possible LOL. I think he’s working on an ergo as well.
(https://uploads.tapatalk-cdn.com/20171022/3b5b3d020ec01170630a858cf448f57d.jpg)
(https://uploads.tapatalk-cdn.com/20171022/cfc608d728cbede3f81144bb08769bb6.jpg)
(https://uploads.tapatalk-cdn.com/20171022/8603585149ede2c321043bbe6c3c733b.jpg)
(https://uploads.tapatalk-cdn.com/20171022/2ccd035760a9a8cc069ba40cb02710a2.jpg)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: Puddsy on Sun, 22 October 2017, 00:34:40
this is good news
Post by: megaforce on Sun, 22 October 2017, 00:38:52
Post by: boo on Sun, 22 October 2017, 00:51:18
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Popkorn,
Possible to buy LZ Ergo Black top only please?
Post by: lasermild on Sun, 22 October 2017, 00:55:38
i have txcp and definitely getting one of those.
Post by: get_weird on Sun, 22 October 2017, 01:19:21
Post by: avid on Sun, 22 October 2017, 06:11:35
Post by: stoic-lemon on Sun, 22 October 2017, 06:32:14
Post by: Jedi on Sun, 22 October 2017, 10:50:46
Post by: wholypantalones on Sun, 22 October 2017, 12:19:25
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Also, here’s a peak of the upcoming projectShow Image(https://uploads.tapatalk-cdn.com/20171022/e7f033838b8fa98e4cc5bfe415f3c123.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/63d15ac9bdafb65b55c5a36f1f19094f.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/872638e3e0fe9c2b8e8d9e9a86878618.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171022/d7aa7b40bee128e285de6471cb27708f.jpg)
======••••======
http://txkeyboards.com/
Yeah, gonna need some of those even though I don't care for small keyboards.
Post by: Trente on Sun, 22 October 2017, 17:14:49
Post by: Puddsy on Sun, 22 October 2017, 18:21:48
I think I had heard somewhere about a TX84 SE coming up, wondering if that's true? Or it is basically the left over of TX84?
to my knowledge there are no TKL leftovers
Post by: popkorn62 on Sun, 22 October 2017, 20:32:39
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Popkorn,
Possible to buy LZ Ergo Black top only please?
Hi boo,
Sorry he only sells in sets (both top and bottom).
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Sun, 22 October 2017, 22:50:03
(https://uploads.tapatalk-cdn.com/20171023/5e6f661567210793a4bc3d72a5dd728e.jpg)(https://uploads.tapatalk-cdn.com/20171023/c4140ab3b6812fbf19035b659828c766.jpg)======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: mr scooty on Sun, 22 October 2017, 22:59:28
Post by: alienman82 on Sun, 22 October 2017, 23:38:53
Post by: boo on Mon, 23 October 2017, 01:30:00
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Popkorn,
Possible to buy LZ Ergo Black top only please?
Hi boo,
Sorry he only sells in sets (both top and bottom).
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Do you know how much for set?
Post by: popkorn62 on Mon, 23 October 2017, 15:28:17
You guys are correct. Those are lz iron man and ergo but he doesn’t have pcb or plate to sell em. They only have top and bottom housing.
Popkorn,
Possible to buy LZ Ergo Black top only please?
Hi boo,
Sorry he only sells in sets (both top and bottom).
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Do you know how much for set?
Pm’d
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Mon, 23 October 2017, 20:12:15
It’s getting very very close already! However, we’re bumping into a small hiccup. All the acrylic gaskets are defective...kin is reordering and expecting to receive new ones in 2 weeks. Thus, shipping will start in 2 weeks.
Every order will have both 8-piece ones and 1-piece one.
Really appreciate your patience!
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: ricyuyc on Mon, 23 October 2017, 22:24:48
Will those orders in Metal Gasket be shipping out earlier?
Hi guys,
It’s getting very very close already! However, we’re bumping into a small hiccup. All the acrylic gaskets are defective...kin is reordering and expecting to receive new ones in 2 weeks. Thus, shipping will start in 2 weeks.
Every order will have both 8-piece ones and 1-piece one.
Really appreciate your patience!
======••••======
http://txkeyboards.com/ (http://txkeyboards.com/)
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: Uleoja on Tue, 24 October 2017, 01:10:57
Post by: Puddsy on Tue, 24 October 2017, 01:15:29
What size spacebar does the tx1800 use?
6.25x or 7x, depending on your layout of choice
Post by: DreLLin on Tue, 24 October 2017, 02:25:31
Hi guys,
It’s getting very very close already! However, we’re bumping into a small hiccup. All the acrylic gaskets are defective...kin is reordering and expecting to receive new ones in 2 weeks. Thus, shipping will start in 2 weeks.
Every order will have both 8-piece ones and 1-piece one.
Really appreciate your patience!
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
That’s a nice move with one piece gaskets. The 8 piece one on my board is the only thing I dislike.
Post by: shadowrealmwarez on Tue, 24 October 2017, 07:44:12
Post by: Jae-3soteric on Tue, 24 October 2017, 07:50:18
Sent from my iPhone using Tapatalk
Post by: popkorn62 on Tue, 24 October 2017, 11:59:44
Will those orders in Metal Gasket be shipping out earlier?Hi guys,
It’s getting very very close already! However, we’re bumping into a small hiccup. All the acrylic gaskets are defective...kin is reordering and expecting to receive new ones in 2 weeks. Thus, shipping will start in 2 weeks.
Every order will have both 8-piece ones and 1-piece one.
Really appreciate your patience!
======••••======
http://txkeyboards.com/ (http://txkeyboards.com/)
Please click LOG IN on register. Bottom page is for newsletter only.
Unfortunately, no. He has not received those either...
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: boo on Sat, 28 October 2017, 17:05:13
on ticket # XJ44744642, I meant acrylic plate instead of polycarb. My bad!
Post by: popkorn62 on Sat, 28 October 2017, 21:46:07
I think it is reasonable that, since we are only 1-2 weeks away from dispatch, no changes to order can be made.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Sun, 29 October 2017, 01:37:35
MOD NOTE: Please refrain from posting For Sale items outside of classifieds.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: poolside on Sun, 29 October 2017, 05:20:02
Hi guys, figure I’ll post here first before getting on r/mm tomorrow
Anyone interested in this:
Red top
Pc bottom (One-off)
Brass plate
Brass weight
Vintage black 54g
Bag
Included shipping
$600 (sorry posted $650 earlier)
https://imgur.com/a/1ZWoE
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
PM'd
Post by: finalarcadia on Sun, 29 October 2017, 09:24:46
Post by: popkorn62 on Sun, 29 October 2017, 20:45:33
So when are TX60 & 65 going for sale? Any chance for a blocker on 65 like Noxary 268?
No news regarding that at this point.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: gr4v3m4n on Sun, 29 October 2017, 20:59:12
Post by: Puddsy on Sun, 29 October 2017, 21:06:58
soooo...that 200 something dolar price on txkeyboard website that includes pcb, plate and weight or just the case?
top and bottom case, i think
Post by: popkorn62 on Sun, 29 October 2017, 22:00:24
soooo...that 200 something dolar price on txkeyboard website that includes pcb, plate and weight or just the case?
Yes and no,
I knew it might cause confusion so I put “Base Price includes housing, weight and acrylic gasket”. No PCB and plate included yet.
TX-CP prices will be updated later when there are stocks :)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Wed, 01 November 2017, 18:01:50
Since the day that we will sell extras thru the website is coming close, anyone has any suggestions on how to receive the payment? Paypal is still freezing kin’s account for both tx1800 and txcp GBs LOL. I already accepted some payments for him in the summer so I’m not comfortable doing that since IRS may be watching. Seems like a bad choice especially when I do not make money from this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: ihalatch on Wed, 01 November 2017, 18:29:41
Post by: popkorn62 on Wed, 01 November 2017, 18:41:06
I haven't received mine yet and you're talking about extras?
Whoa dude...
Extras are b-stocks and only available after the GB is done.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: packman86 on Wed, 01 November 2017, 21:23:00
Hi guys,
Since the day that we will sell extras thru the website is coming close, anyone has any suggestions on how to receive the payment? Paypal is still freezing kin’s account for both tx1800 and txcp GBs LOL. I already accepted some payments for him in the summer so I’m not comfortable doing that since IRS may be watching. Seems like a bad choice especially when I do not make money from this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Is there any other service that offers protection like PP does? I feel like that would be requirement for buying expensive stuff online.
Post by: Puddsy on Wed, 01 November 2017, 21:37:57
Hi guys,
Since the day that we will sell extras thru the website is coming close, anyone has any suggestions on how to receive the payment? Paypal is still freezing kin’s account for both tx1800 and txcp GBs LOL. I already accepted some payments for him in the summer so I’m not comfortable doing that since IRS may be watching. Seems like a bad choice especially when I do not make money from this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Is there any other service that offers protection like PP does? I feel like that would be requirement for buying expensive stuff online.
Korean GBs are typically done with bank transfer, interestingly enough.
Paypal is the best we've got.
Post by: redbanshee on Thu, 02 November 2017, 00:13:52
Hi guys,
Since the day that we will sell extras thru the website is coming close, anyone has any suggestions on how to receive the payment? Paypal is still freezing kin’s account for both tx1800 and txcp GBs LOL. I already accepted some payments for him in the summer so I’m not comfortable doing that since IRS may be watching. Seems like a bad choice especially when I do not make money from this.
https://www.stripe.com
https://www.trycelery.com
https://squareup.com/
Bitcoin
Post by: Puddsy on Thu, 02 November 2017, 01:46:15
https://www.stripe.com
(https://i.imgur.com/f5v5dSn.png)
I don't see South Korea, China, or Vietnam on this list. Stripe is out for most Asian GBs.
Source (https://stripe.com/global)
Quote
https://www.trycelery.com
(https://i.imgur.com/QmIqVN4.png)
The "limited set of countries" is the same as Stripe's. Check the link below.
Source (http://help.trycelery.com/knowledgebase/articles/534265-does-celery-work-globally-or-accept-international)
Quote
https://squareup.com/
(https://i.imgur.com/iDayS7r.png)
This list is even smaller.
Source (https://squareup.com/help/us/en/article/4956-international-availability)
Quote
Bitcoin
Admittedly, I don't know much about bitcoin. Would this be any different than a bank transfer? Does bitcoin have chargebacks? Does bitcoin have seller/buyer protections?
How would you get people to convert to bitcoin/other cryptos from regular currency? How would this help people with limited technical skills, or who don't have the time to learn how to use bitcoin?
Post by: gr4v3m4n on Thu, 02 November 2017, 02:35:05
Hi guys,
Since the day that we will sell extras thru the website is coming close, anyone has any suggestions on how to receive the payment? Paypal is still freezing kin’s account for both tx1800 and txcp GBs LOL. I already accepted some payments for him in the summer so I’m not comfortable doing that since IRS may be watching. Seems like a bad choice especially when I do not make money from this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Is there any other service that offers protection like PP does? I feel like that would be requirement for buying expensive stuff online.
Korean GBs are typically done with bank transfer, interestingly enough.
Paypal is the best we've got.
in my country domestic gb also done by bank transfer as for international gb i also think that paypal is the best option..
Post by: redbanshee on Thu, 02 November 2017, 14:51:59
reads username
/facepalm
didnt know you were running this buy puds, they were just suggestions, thanks for systematically picking apart all my suggestions that i obviously didn't vet enough.
QuoteBitcoin
Admittedly, I don't know much about bitcoin. Would this be any different than a bank transfer? YES Does bitcoin have chargebacks? NO Does bitcoin have seller/buyer protections? NO
How would you get people to convert to bitcoin/other cryptos from regular currency? Coinbase/Gemini, any bitcoin exchange How would this help people with limited technical skills, or who don't have the time to learn how to use bitcoin? It wont
Post by: megaforce on Fri, 03 November 2017, 01:45:33
Bro all he did was breakdown your suggestions. Relax fam.
Post by: longnt on Fri, 03 November 2017, 07:08:07
Hi guys,
Since the day that we will sell extras thru the website is coming close, anyone has any suggestions on how to receive the payment? Paypal is still freezing kin’s account for both tx1800 and txcp GBs LOL. I already accepted some payments for him in the summer so I’m not comfortable doing that since IRS may be watching. Seems like a bad choice especially when I do not make money from this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
How about Payoneer?
https://www.payoneer.com/
Post by: redbanshee on Fri, 03 November 2017, 09:03:41
LUL
Bro all he did was breakdown your suggestions. Relax fam.
Im plenty relaxed, the dude just has to much time on his hands or something. 99% of his posts are him being condescending in some way or another. I mean, why spend 30 minuets going to each site and literally taking screenshots, and making a big elaborate post on why all the suggestions suck when he could just say "None of those sites are available in South Korea."
Post by: popkorn62 on Fri, 03 November 2017, 13:33:20
Since kin will probably not going to run a GB again anytime soon, we will only sell boards that in stock.
It can work like this:
Buyer pays invoice => Probably through a payment processor other than Paypal => Payment confirmation => Receive goods
If dispute:
Send invoice through contact form => Should have answers within 48 hours => If resolved: refund or have a different shipping date; if not you can always charge back through banks since you have the receipt?
Sorry this is like word salad but I’m at work and can’t draw a pic LOL
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: TerryMathews on Fri, 03 November 2017, 13:53:48
I think my concern stems from the buyer protection.
Since kin will probably not going to run a GB again anytime soon, we will only sell boards that in stock.
It can work like this:
Buyer pays invoice => Probably through a payment processor other than Paypal => Payment confirmation => Receive goods
If dispute:
Send invoice through contact form => Should have answers within 48 hours => If resolved: refund or have a different shipping date; if not you can always charge back through banks since you have the receipt?
Sorry this is like word salad but I’m at work and can’t draw a pic LOL
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
You can't charge back like that in the US unless the payment is drawn from a credit card.
Post by: popkorn62 on Fri, 03 November 2017, 14:10:58
I think my concern stems from the buyer protection.
Since kin will probably not going to run a GB again anytime soon, we will only sell boards that in stock.
It can work like this:
Buyer pays invoice => Probably through a payment processor other than Paypal => Payment confirmation => Receive goods
If dispute:
Send invoice through contact form => Should have answers within 48 hours => If resolved: refund or have a different shipping date; if not you can always charge back through banks since you have the receipt?
Sorry this is like word salad but I’m at work and can’t draw a pic LOL
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
You can't charge back like that in the US unless the payment is drawn from a credit card.
Oh...
Hmm...
Then I’d advise everyone to pay using a credit card?
I feel like we hit a wall every time I think about this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: shadowrealmwarez on Fri, 03 November 2017, 14:13:10
I think my concern stems from the buyer protection.
Since kin will probably not going to run a GB again anytime soon, we will only sell boards that in stock.
It can work like this:
Buyer pays invoice => Probably through a payment processor other than Paypal => Payment confirmation => Receive goods
If dispute:
Send invoice through contact form => Should have answers within 48 hours => If resolved: refund or have a different shipping date; if not you can always charge back through banks since you have the receipt?
Sorry this is like word salad but I’m at work and can’t draw a pic LOL
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
You can't charge back like that in the US unless the payment is drawn from a credit card.
Oh...
Hmm...
Then I’d advise everyone to pay using a credit card?
I feel like we hit a wall every time I think about this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Maybe this is a stupid question from someone who's never participated in a group buy, but is it often that someone disputes and/or requests a refund? I figured if its for B-Stock, I buy one, I wait, it comes in, ? , profit?
Am I wrong for assuming that?
Post by: popkorn62 on Fri, 03 November 2017, 14:33:27
I think my concern stems from the buyer protection.
Since kin will probably not going to run a GB again anytime soon, we will only sell boards that in stock.
It can work like this:
Buyer pays invoice => Probably through a payment processor other than Paypal => Payment confirmation => Receive goods
If dispute:
Send invoice through contact form => Should have answers within 48 hours => If resolved: refund or have a different shipping date; if not you can always charge back through banks since you have the receipt?
Sorry this is like word salad but I’m at work and can’t draw a pic LOL
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
You can't charge back like that in the US unless the payment is drawn from a credit card.
Oh...
Hmm...
Then I’d advise everyone to pay using a credit card?
I feel like we hit a wall every time I think about this.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Maybe this is a stupid question from someone who's never participated in a group buy, but is it often that someone disputes and/or requests a refund? I figured if its for B-Stock, I buy one, I wait, it comes in, ? , profit?
Am I wrong for assuming that?
GB usually has huge delays (like this one right now). People may want a refund if it takes longer than 6 months to conclude and may also want a new invoice to refresh that 6 months protection by Paypal. The thing is, once you paid, all those money go to production. Kin has to take his own money to refund those. It’s just bad overall. That’s why i asked him to let me communicate to calm you guys and to reassure he’s not going anywhere with your money.
I didn’t get my first tx1800 until 7 months later (and I bought the spot from someone else who already waited 6 months) and it was fine. It was a production thing. Kin obviously wants to conclude GB in time but factory kept sending defective products. He’s just trying his best and hoping everyone will understand.
If it’s just simply selling something in stock, I doubt that there’ll be many disputes. He’s quite quick in dispatching process.
However, again, I know people will want protection regardless of what they’re buying. If it’s simple, I’d just tell people to pay in bitcoin ;).
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: ihalatch on Fri, 03 November 2017, 18:38:23
Post by: popkorn62 on Fri, 03 November 2017, 19:23:10
I'm still waiting for my keyboard. I was supposed to be in the first round? When are they going to be shipped? I'm tier of hearing next two weeks.
Hi there,
We are all in the same situation. Metal gasket is the last piece needed before dispatch. We all want it as soon as possible but I cannot speak for the factory...they are working on them as we speak.
The best I can offer you at this point is a refund.
ETA is before the end of this year so we don’t have to change the date again :(.
Really appreciate the patience.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: boo on Mon, 13 November 2017, 23:25:00
I'm still waiting for my keyboard. I was supposed to be in the first round? When are they going to be shipped? I'm tier of hearing next two weeks.
Hi there,
We are all in the same situation. Metal gasket is the last piece needed before dispatch. We all want it as soon as possible but I cannot speak for the factory...they are working on them as we speak.
The best I can offer you at this point is a refund.
ETA is before the end of this year so we don’t have to change the date again :(.
Really appreciate the patience.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Hey Popkorn, possible for before holiday shipping? I imagine it’s going to be busy
Post by: popkorn62 on Fri, 17 November 2017, 13:02:44
Kin will receive the metal gaskets and acrylic diffuser this week. Hopefully to send it out next week. Apologies to US buyers since you guys will probably not get it before Thanksgiving :(.
@boo: he’ll start shipping next week.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: boo on Fri, 17 November 2017, 14:08:41
Hi guys,
Kin will receive the metal gaskets and acrylic diffuser this week. Hopefully to send it out next week. Apologies to US buyers since you guys will probably not get it before Thanksgiving :(.
@boo: he’ll start shipping next week.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Thanks! Really looking forward to it. Hopefully it’s here before Christmas :)
Sent from my iPhone using Tapatalk
Post by: Jedi on Fri, 17 November 2017, 14:39:40
Post by: krispy on Fri, 17 November 2017, 16:41:21
Different board but by any chance do you know if there's an update on the fixed gray r2 tx-cp's and when they'll go out? The last time I asked Kin he said early-mid November.
Post by: popkorn62 on Sat, 18 November 2017, 00:18:51
Hi Popkorn,
Different board but by any chance do you know if there's an update on the fixed gray r2 tx-cp's and when they'll go out? The last time I asked Kin he said early-mid November.
Will be around a week or two later because factory will send it next week
.======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Sun, 19 November 2017, 22:58:00
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Sun, 19 November 2017, 22:58:13
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: Puddsy on Sun, 19 November 2017, 23:10:58
Quick peepShow Image(https://uploads.tapatalk-cdn.com/20171120/56ac37eb84343a280fc8526fe2b4f387.jpg)
many
Post by: packman86 on Mon, 20 November 2017, 00:23:16
Quick peepShow Image(https://uploads.tapatalk-cdn.com/20171120/56ac37eb84343a280fc8526fe2b4f387.jpg)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Nice! I see a lot of grays. Any silvers there?
Post by: kitchenace13 on Mon, 20 November 2017, 09:56:26
Nice! I see a lot of grays. Any silvers there?
Titanium Gray I know had to go back in for re-anodization, not sure about silver. Hopefully the TiGray TXCP I ordered is in that stack (hard to tell what keyboard that is)
Post by: Uleoja on Mon, 20 November 2017, 15:06:57
Quick peepShow Image(https://uploads.tapatalk-cdn.com/20171120/56ac37eb84343a280fc8526fe2b4f387.jpg)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Nice! I see a lot of grays. Any silvers there?
Hello Silver brother!
Post by: Puddsy on Mon, 20 November 2017, 15:44:57
Nice! I see a lot of grays. Any silvers there?
Titanium Gray I know had to go back in for re-anodization, not sure about silver. Hopefully the TiGray TXCP I ordered is in that stack (hard to tell what keyboard that is)
those are CPs
Post by: popkorn62 on Tue, 21 November 2017, 00:44:34
Anyway, bad news regarding the metal gasket. Outside is polished and beautiful. Inside is disgusting.
Kin will email you guys a form soon that has these options:
1/ Get a refund of $20
2/ Get all the parts below instead:
Film $5
Stabs $7
234 led (pink, warm white, ice blue) $5
234 led (red, green, blue, white) $3
3) Pay $20 more for the gasket
(https://uploads.tapatalk-cdn.com/20171121/566755df68233f00e38d0fc508bed2be.jpg)(https://uploads.tapatalk-cdn.com/20171121/e658a5ffa0f2ad7834d9f84d29a722c3.jpg)
Here comes the (hopefully will come true) good news: Kin will deal with Paypal after delivering all TXCP and TX1800. Thus, we will likely to use Paypal to sell on txkeyboards. Cheers!
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: Puddsy on Tue, 21 November 2017, 01:01:23
Woot??! I swear I posted something...
Anyway, bad news regarding the metal gasket. Outside is polished and beautiful. Inside is disgusting.
Kin will email you guys a form soon that has these options:
1/ Get a refund of $20
2/ Get all the parts below instead:
Film $5
Stabs $7
234 led (pink, warm white, ice blue) $5
234 led (red, green, blue, white) $3
3) Pay $20 more for the gasketShow Image(https://uploads.tapatalk-cdn.com/20171121/566755df68233f00e38d0fc508bed2be.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171121/e658a5ffa0f2ad7834d9f84d29a722c3.jpg)
Here comes the (hopefully will come true) good news: Kin will deal with Paypal after delivering all TXCP and TX1800. Thus, we will likely to use Paypal to sell on txkeyboards. Cheers!
bad luck
hopefully this all resolves soon
Post by: kitchenace13 on Tue, 21 November 2017, 02:11:33
Post by: Puddsy on Tue, 21 November 2017, 02:43:38
What are the gaskets for again? Sorry first TX keyboard
they are a replacement for the acrylic diffuser, since some people don't like it
Post by: nevaenuf on Tue, 21 November 2017, 06:28:36
Woot??! I swear I posted something...
Anyway, bad news regarding the metal gasket. Outside is polished and beautiful. Inside is disgusting.
Kin will email you guys a form soon that has these options:
1/ Get a refund of $20
2/ Get all the parts below instead:
Film $5
Stabs $7
234 led (pink, warm white, ice blue) $5
234 led (red, green, blue, white) $3
3) Pay $20 more for the gasketShow Image(https://uploads.tapatalk-cdn.com/20171121/566755df68233f00e38d0fc508bed2be.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171121/e658a5ffa0f2ad7834d9f84d29a722c3.jpg)
Here comes the (hopefully will come true) good news: Kin will deal with Paypal after delivering all TXCP and TX1800. Thus, we will likely to use Paypal to sell on txkeyboards. Cheers!
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
For option 3, why pay $20 more for the gasket? Did we not already pay for it? And what kind of new timeline would we expect if we did?
Post by: packman86 on Tue, 21 November 2017, 08:27:54
Here comes the (hopefully will come true) good news: Kin will deal with Paypal after delivering all TXCP and TX1800. Thus, we will likely to use Paypal to sell on txkeyboards. Cheers!
This is great news. I think a lot of people would be hesitant to buy if paypal was not an option.
Looking forward to seeing these on the website.
Post by: boo on Tue, 21 November 2017, 10:19:43
Woot??! I swear I posted something...
Anyway, bad news regarding the metal gasket. Outside is polished and beautiful. Inside is disgusting.
Kin will email you guys a form soon that has these options:
1/ Get a refund of $20
2/ Get all the parts below instead:
Film $5
Stabs $7
234 led (pink, warm white, ice blue) $5
234 led (red, green, blue, white) $3
3) Pay $20 more for the gasketShow Image(https://uploads.tapatalk-cdn.com/20171121/566755df68233f00e38d0fc508bed2be.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171121/e658a5ffa0f2ad7834d9f84d29a722c3.jpg)
Here comes the (hopefully will come true) good news: Kin will deal with Paypal after delivering all TXCP and TX1800. Thus, we will likely to use Paypal to sell on txkeyboards. Cheers!
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
If we opt for option 1 or 2, will the boards ship faster?
Post by: roostrc0gburn on Tue, 21 November 2017, 11:46:26
Post by: Puddsy on Tue, 21 November 2017, 12:09:07
Woot??! I swear I posted something...
Anyway, bad news regarding the metal gasket. Outside is polished and beautiful. Inside is disgusting.
Kin will email you guys a form soon that has these options:
1/ Get a refund of $20
2/ Get all the parts below instead:
Film $5
Stabs $7
234 led (pink, warm white, ice blue) $5
234 led (red, green, blue, white) $3
3) Pay $20 more for the gasketShow Image(https://uploads.tapatalk-cdn.com/20171121/566755df68233f00e38d0fc508bed2be.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171121/e658a5ffa0f2ad7834d9f84d29a722c3.jpg)
Here comes the (hopefully will come true) good news: Kin will deal with Paypal after delivering all TXCP and TX1800. Thus, we will likely to use Paypal to sell on txkeyboards. Cheers!
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
For option 3, why pay $20 more for the gasket? Did we not already pay for it? And what kind of new timeline would we expect if we did?
i think that's just the normal price
Post by: Uleoja on Tue, 21 November 2017, 12:18:22
Woot??! I swear I posted something...
Anyway, bad news regarding the metal gasket. Outside is polished and beautiful. Inside is disgusting.
Kin will email you guys a form soon that has these options:
1/ Get a refund of $20
2/ Get all the parts below instead:
Film $5
Stabs $7
234 led (pink, warm white, ice blue) $5
234 led (red, green, blue, white) $3
3) Pay $20 more for the gasketShow Image(https://uploads.tapatalk-cdn.com/20171121/566755df68233f00e38d0fc508bed2be.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171121/e658a5ffa0f2ad7834d9f84d29a722c3.jpg)
Here comes the (hopefully will come true) good news: Kin will deal with Paypal after delivering all TXCP and TX1800. Thus, we will likely to use Paypal to sell on txkeyboards. Cheers!
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Looking at my invoice I bought both a SS and Brass gasket @ $20. Are both the SS and Brass messed up? If I want the Brass still and am willing to wait do I have to give another $20 for a fixed one ontop of what I already payed out for everything (Close to $800)? I really want the brass gasket as I will probably not be using much of the LED functions on the board. Thanks again for all the updates!
Post by: popkorn62 on Tue, 21 November 2017, 19:58:18
[1] person who has not bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
[2] person who has bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) $20 refunding
[3] person who has bought 8piece metal gasket and want to buy 1piece metal gasket
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) 1piece metal gasket
* he has to pay $20 more
[4] person who has bought 2 8piece metal gaskets
1) 8piece acrylic
2) 1piece acrylic
Refunding $40 OR pay $40 more to get all 4 items.
The reason he charges more because after the first and second factory failed to deliver, he already paid upfront more money to get it produce at somewhere else. Each time the factory failed, he lost 50% of what he spent on 200 sets of metal gaskets. $40/set right now is to recoup a part of that cost...he still loses more than $4K after changing the price. It is out of his control and he understands you guys may not like to be charged more so he is offering different options for you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: Uleoja on Tue, 21 November 2017, 21:01:40
Here are scenarios and what you guys will receive:
[1] person who has not bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
[2] person who has bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) $20 refunding
[3] person who has bought 8piece metal gasket and want to buy 1piece metal gasket
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) 1piece metal gasket
* he has to pay $20 more
[4] person who has bought 2 8piece metal gaskets
1) 8piece acrylic
2) 1piece acrylic
Refunding $40 OR pay $40 more to get all 4 items.
The reason he charges more because after the first and second factory failed to deliver, he already paid upfront more money to get it produce at somewhere else. Each time the factory failed, he lost 50% of what he spent on 200 sets of metal gaskets. $40/set right now is to recoup a part of that cost...he still loses more than $4K after changing the price. It is out of his control and he understands you guys may not like to be charged more so he is offering different options for you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
I got no problem sending more money at this point. What is the status of the SS gaskets? I bought a SS and Brass. Will I just need to send another 20 for the brass?
Post by: ihalatch on Tue, 21 November 2017, 21:13:42
Post by: popkorn62 on Tue, 21 November 2017, 21:18:54
Here are scenarios and what you guys will receive:
[1] person who has not bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
[2] person who has bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) $20 refunding
[3] person who has bought 8piece metal gasket and want to buy 1piece metal gasket
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) 1piece metal gasket
* he has to pay $20 more
[4] person who has bought 2 8piece metal gaskets
1) 8piece acrylic
2) 1piece acrylic
Refunding $40 OR pay $40 more to get all 4 items.
The reason he charges more because after the first and second factory failed to deliver, he already paid upfront more money to get it produce at somewhere else. Each time the factory failed, he lost 50% of what he spent on 200 sets of metal gaskets. $40/set right now is to recoup a part of that cost...he still loses more than $4K after changing the price. It is out of his control and he understands you guys may not like to be charged more so he is offering different options for you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
I got no problem sending more money at this point. What is the status of the SS gaskets? I bought a SS and Brass. Will I just need to send another 20 for the brass?
You’ve already paid $40 so if you only want the brass, you’re all set.(https://uploads.tapatalk-cdn.com/20171122/589851e4577e3ca6e9fa4fa51998afb9.jpg)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: Uleoja on Tue, 21 November 2017, 21:25:05
Here are scenarios and what you guys will receive:
[1] person who has not bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
[2] person who has bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) $20 refunding
[3] person who has bought 8piece metal gasket and want to buy 1piece metal gasket
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) 1piece metal gasket
* he has to pay $20 more
[4] person who has bought 2 8piece metal gaskets
1) 8piece acrylic
2) 1piece acrylic
Refunding $40 OR pay $40 more to get all 4 items.
The reason he charges more because after the first and second factory failed to deliver, he already paid upfront more money to get it produce at somewhere else. Each time the factory failed, he lost 50% of what he spent on 200 sets of metal gaskets. $40/set right now is to recoup a part of that cost...he still loses more than $4K after changing the price. It is out of his control and he understands you guys may not like to be charged more so he is offering different options for you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
I got no problem sending more money at this point. What is the status of the SS gaskets? I bought a SS and Brass. Will I just need to send another 20 for the brass?
You’ve already paid $40 so if you only want the brass, you’re all set.Show Image(https://uploads.tapatalk-cdn.com/20171122/589851e4577e3ca6e9fa4fa51998afb9.jpg)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
The other thing that I am confused about is that are the gaskets in question for the 1800 or CP? I feel like the thread has a mix of both boards being updated and I am not sure at this point what is what (the last picture you posted had all been CP's stacked). Are the gaskets for the 1800 or the CP bad? Also looking at my original invoice I am not seeing the difference between a 8 piece and 1 piece. All it is saying is "SS Gasket : $20 Golden Gasket : $20" I do not remember seeing an option for different gaskets besides what they had been made out of. When it comes down to it I would like a 1 piece and 8 piece Brass gasket.
Please also confirm about the SS gaskets that I payed for. I also think that Kin should be getting his money back. If the factory cannot produce a good product why should he have to pay for it? What factory produced the gaskets for the Korean boards that have already been shipped for the past month or two?
Post by: Puddsy on Tue, 21 November 2017, 22:00:54
Post by: popkorn62 on Tue, 21 November 2017, 22:23:14
Here are scenarios and what you guys will receive:
[1] person who has not bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
[2] person who has bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) $20 refunding
[3] person who has bought 8piece metal gasket and want to buy 1piece metal gasket
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) 1piece metal gasket
* he has to pay $20 more
[4] person who has bought 2 8piece metal gaskets
1) 8piece acrylic
2) 1piece acrylic
Refunding $40 OR pay $40 more to get all 4 items.
The reason he charges more because after the first and second factory failed to deliver, he already paid upfront more money to get it produce at somewhere else. Each time the factory failed, he lost 50% of what he spent on 200 sets of metal gaskets. $40/set right now is to recoup a part of that cost...he still loses more than $4K after changing the price. It is out of his control and he understands you guys may not like to be charged more so he is offering different options for you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
I got no problem sending more money at this point. What is the status of the SS gaskets? I bought a SS and Brass. Will I just need to send another 20 for the brass?
You’ve already paid $40 so if you only want the brass, you’re all set.Show Image(https://uploads.tapatalk-cdn.com/20171122/589851e4577e3ca6e9fa4fa51998afb9.jpg)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
The other thing that I am confused about is that are the gaskets in question for the 1800 or CP? I feel like the thread has a mix of both boards being updated and I am not sure at this point what is what (the last picture you posted had all been CP's stacked). Are the gaskets for the 1800 or the CP bad? Also looking at my original invoice I am not seeing the difference between a 8 piece and 1 piece. All it is saying is "SS Gasket : $20 Golden Gasket : $20" I do not remember seeing an option for different gaskets besides what they had been made out of. When it comes down to it I would like a 1 piece and 8 piece Brass gasket.
Please also confirm about the SS gaskets that I payed for. I also think that Kin should be getting his money back. If the factory cannot produce a good product why should he have to pay for it? What factory produced the gaskets for the Korean boards that have already been shipped for the past month or two?
puddsy is correct. Txcp doesn’t have gasket and your order is TX1800.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: nevaenuf on Tue, 21 November 2017, 22:27:44
Here are scenarios and what you guys will receive:
[1] person who has not bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
[2] person who has bought 8piece metal gasket.
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) $20 refunding
[3] person who has bought 8piece metal gasket and want to buy 1piece metal gasket
1) 8piece acrylic gasket
2) 1piece acrylic gasket
3) 8piece metal gasket
4) 1piece metal gasket
* he has to pay $20 more
[4] person who has bought 2 8piece metal gaskets
1) 8piece acrylic
2) 1piece acrylic
Refunding $40 OR pay $40 more to get all 4 items.
The reason he charges more because after the first and second factory failed to deliver, he already paid upfront more money to get it produce at somewhere else. Each time the factory failed, he lost 50% of what he spent on 200 sets of metal gaskets. $40/set right now is to recoup a part of that cost...he still loses more than $4K after changing the price. It is out of his control and he understands you guys may not like to be charged more so he is offering different options for you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
If I pay $20 more for the additional 1 piece metal gasket, will it be brass?
If I pay $20 more for the additional 1 piece metal gasket, will doing so postpone my shipment? If so, by how long?
Post by: smittysteve on Wed, 22 November 2017, 02:28:35
Had the chance to talk with Kin today and he shared some additional pics and info on the gasket.
The problem is with the junctions of the 8 pieces- Kin is not happy with them. If you know him/ enjoy his boards, you know the dude is an awesome perfectionist. I see why he’s unhappy- check out pics below, it’s not great where they join- often you can see a seam.
If you’re ok with that, boards can probably ship pretty quickly- and he said he’d include the current gaskets for free (ie: option 1- $20 refund if you’ve paid for the metal gasket).
If you want the single gasket, it’s +$20 from what you’ve already paid- they are costing him $40 to make.
I hope that helps clarify things. I don’t think the current 8-piece gaskets look awful, but they aren’t perfect. For the cost of this baby, I’m going for the single gasket option. I forgot to ask how much time that will add... probably a couple of weeks?
(https://uploads.tapatalk-cdn.com/20171122/4174c3ad011cad8fc9d0f8e6c6453cad.jpg)(https://uploads.tapatalk-cdn.com/20171122/9e4a3bb06bf7dabd6901aab50bb67275.jpg)(https://uploads.tapatalk-cdn.com/20171122/3e37a13bcb87947f1933f28eaf77b3e3.jpg)(https://uploads.tapatalk-cdn.com/20171122/12c1ea7380ac8f3679b0572fe80dbe9e.jpg)(https://uploads.tapatalk-cdn.com/20171122/ed93cf5ca7ba98a7582740011a117541.jpg)
Post by: Puddsy on Wed, 22 November 2017, 02:30:24
Hello All-
Had the chance to talk with Kin today and he shared some additional pics and info on the gasket.
The problem is with the junctions of the 8 pieces- Kin is not happy with them. If you know him/ enjoy his boards, you know the dude is an awesome perfectionist. I see why he’s unhappy- check out pics below, it’s not great where they join- often you can see a seam.
If you’re ok with that, boards can probably ship pretty quickly- and he said he’d include the current gaskets for free (ie: option 1- $20 refund if you’ve paid for the metal gasket).
If you want the single gasket, it’s +$20 from what you’ve already paid- they are costing him $40 to make.
I hope that helps clarify things. I don’t think the current 8-piece gaskets look awful, but they aren’t perfect. For the cost of this baby, I’m going for the single gasket option. I forgot to ask how much time that will add... probably a couple of weeks?Show Image(https://uploads.tapatalk-cdn.com/20171122/4174c3ad011cad8fc9d0f8e6c6453cad.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/9e4a3bb06bf7dabd6901aab50bb67275.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/3e37a13bcb87947f1933f28eaf77b3e3.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/12c1ea7380ac8f3679b0572fe80dbe9e.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/ed93cf5ca7ba98a7582740011a117541.jpg)
tbh i like the 8 piece, but maybe i need to see more pics of it
then again, i'm in MIRA, so split diffusers isn't something i'm against
thanks for the clarification
Post by: smittysteve on Wed, 22 November 2017, 02:35:20
Hello All-
Had the chance to talk with Kin today and he shared some additional pics and info on the gasket.
The problem is with the junctions of the 8 pieces- Kin is not happy with them. If you know him/ enjoy his boards, you know the dude is an awesome perfectionist. I see why he’s unhappy- check out pics below, it’s not great where they join- often you can see a seam.
If you’re ok with that, boards can probably ship pretty quickly- and he said he’d include the current gaskets for free (ie: option 1- $20 refund if you’ve paid for the metal gasket).
If you want the single gasket, it’s +$20 from what you’ve already paid- they are costing him $40 to make.
I hope that helps clarify things. I don’t think the current 8-piece gaskets look awful, but they aren’t perfect. For the cost of this baby, I’m going for the single gasket option. I forgot to ask how much time that will add... probably a couple of weeks?Show Image(https://uploads.tapatalk-cdn.com/20171122/4174c3ad011cad8fc9d0f8e6c6453cad.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/9e4a3bb06bf7dabd6901aab50bb67275.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/3e37a13bcb87947f1933f28eaf77b3e3.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/12c1ea7380ac8f3679b0572fe80dbe9e.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/ed93cf5ca7ba98a7582740011a117541.jpg)
tbh i like the 8 piece, but maybe i need to see more pics of it
then again, i'm in MIRA, so split diffusers isn't something i'm against
thanks for the clarification
No worries. :)
I don’t think it’s terrible either. Depending on the fit for the 8 pieces drawn (probably a bit variable), many might never notice any seams... some highly ocd among us would see nothing but that. Everyone can choose accordingly.
And I appreciate Kin’s perfection- you know this has worried him and he wants to remedy or offer options. Much better than it just showing up and having folks irritated- so kudos to him for that.
Post by: DreLLin on Wed, 22 November 2017, 08:37:46
Hello All-
Had the chance to talk with Kin today and he shared some additional pics and info on the gasket.
The problem is with the junctions of the 8 pieces- Kin is not happy with them. If you know him/ enjoy his boards, you know the dude is an awesome perfectionist. I see why he’s unhappy- check out pics below, it’s not great where they join- often you can see a seam.
If you’re ok with that, boards can probably ship pretty quickly- and he said he’d include the current gaskets for free (ie: option 1- $20 refund if you’ve paid for the metal gasket).
If you want the single gasket, it’s +$20 from what you’ve already paid- they are costing him $40 to make.
I hope that helps clarify things. I don’t think the current 8-piece gaskets look awful, but they aren’t perfect. For the cost of this baby, I’m going for the single gasket option. I forgot to ask how much time that will add... probably a couple of weeks?Show Image(https://uploads.tapatalk-cdn.com/20171122/4174c3ad011cad8fc9d0f8e6c6453cad.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/9e4a3bb06bf7dabd6901aab50bb67275.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/3e37a13bcb87947f1933f28eaf77b3e3.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/12c1ea7380ac8f3679b0572fe80dbe9e.jpg)Show Image(https://uploads.tapatalk-cdn.com/20171122/ed93cf5ca7ba98a7582740011a117541.jpg)
tbh i like the 8 piece, but maybe i need to see more pics of it
then again, i'm in MIRA, so split diffusers isn't something i'm against
thanks for the clarification
Since you can't build it without a gasket, it's the only complaint I have about my fabulous TX-1800 and I can't wait to get that 1 piece gold and acrylic gasket for it.
[attachimg=1]
[attachimg=2]
Post by: TerryMathews on Wed, 22 November 2017, 09:44:47
Post by: roostrc0gburn on Wed, 22 November 2017, 11:36:45
Post by: duynguyenle on Wed, 22 November 2017, 13:19:50
Am curious about the one piece acrylic ones too, how does one go about adding an extra one piece acrylic spacer to existing order (and additonally does this mean extra waiting for them to be made)?
Please let me know, thanks!
Post by: popkorn62 on Wed, 22 November 2017, 17:08:28
So my original order has 8 piece metal spacer, I am still a bit fuzzy about the options. If I read the posts correctly, does this mean I can either choose to keep the 8 piece spacer and have the board shipped right away or pay $20 extra and wait until the new ones are made? Do you have any estimates on how long this might take popkorn? I was hoping to get this before Christmas because I have a few days off work for holiday and have some free time for building boards.
Am curious about the one piece acrylic ones too, how does one go about adding an extra one piece acrylic spacer to existing order (and additonally does this mean extra waiting for them to be made)?
Please let me know, thanks!
Hi there,
The option means if you ordered a set of 8-piece metal gasket you can:
1/ Get a $20 refund and still keep that set, kin will also include the 1-piece and 8-piece acrylic as courtesy.
2/ Spend $20 more to get the 1-piece metal gasket. Acrylic ones are still included as courtesy.
Your options will not affect your shipping time. He already has all the parts and is preparing the form.
The price difference only comes from 1-piece metal gasket.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: duynguyenle on Wed, 22 November 2017, 17:52:12
So my original order has 8 piece metal spacer, I am still a bit fuzzy about the options. If I read the posts correctly, does this mean I can either choose to keep the 8 piece spacer and have the board shipped right away or pay $20 extra and wait until the new ones are made? Do you have any estimates on how long this might take popkorn? I was hoping to get this before Christmas because I have a few days off work for holiday and have some free time for building boards.
Am curious about the one piece acrylic ones too, how does one go about adding an extra one piece acrylic spacer to existing order (and additonally does this mean extra waiting for them to be made)?
Please let me know, thanks!
Hi there,
The option means if you ordered a set of 8-piece metal gasket you can:
1/ Get a $20 refund and still keep that set, kin will also include the 1-piece and 8-piece acrylic as courtesy.
2/ Spend $20 more to get the 1-piece metal gasket. Acrylic ones are still included as courtesy.
Your options will not affect your shipping time. He already has all the parts and is preparing the form.
The price difference only comes from 1-piece metal gasket.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Right you are, that makes sense. I will pay the extra twenty for a one piece spacer. Where do I send monies? Also I have talked to Kin in the past about buying his Leeku MX3000 plate and have it shipped together with my TX1800, should I contact him privately on Telegram about it or is there another prefered way of contact (raising a ticket via the website?)
Also I would like to add a TKL sized carrying case for my TX84 that I already have, how should I go about that also?
Thanks!
Post by: kin25 on Wed, 22 November 2017, 19:16:32
I needed time to solve some problems.
All problems were solved.
I will send email with google form to preorderers.
You can choose what you want..
You can write in the form what you add something like film, leds, stabs, bag etc.
Before Christmas you can receive tx1800v2
After finishing google form, popkorn will send an invoice to you.
Thank you.
Post by: unmuscular_michael on Wed, 22 November 2017, 19:21:58
Sorry for late shipping.
I needed time to solve some problems.
All problems were solved.
I will send email with google form to preorderers.
You can choose what you want..
You can write in the form what you add something like film, leds, stabs, bag etc.
Before Christmas you can receive tx1800v2
After finishing google form, popkorn will send an invoice to you.
Thank you.
Thanks Kin. Sorry to hear how many problems you've had in getting this made. By all accounts it looks like it was worth the wait!
Post by: ye_cole on Wed, 22 November 2017, 19:47:18
Post by: Puddsy on Wed, 22 November 2017, 20:10:43
can we still preorder? appears the link is down.
They were closed a few weeks ago, but there will be extras for sale
Post by: ye_cole on Wed, 22 November 2017, 20:11:21
Sent from my SAMSUNG-SM-G930A using Tapatalk
Post by: popkorn62 on Wed, 22 November 2017, 22:30:04
Ah, crap. Have they said an ETA for extras yet?
Sent from my SAMSUNG-SM-G930A using Tapatalk
Extras will be available after the fulfillment of GB so after Christmas.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: wholypantalones on Sat, 25 November 2017, 07:31:50
Post by: nevaenuf on Sat, 25 November 2017, 12:21:47
Post by: Puddsy on Sun, 26 November 2017, 01:25:53
Where's the form??
After GB is done, unless you're asking about the gasket one.
PM popkorn
Post by: kin25 on Sun, 26 November 2017, 09:18:02
https://goo.gl/forms/ulXABMJv0cjwNTVs2 (https://goo.gl/forms/ulXABMJv0cjwNTVs2)
I sent email to persons on a subscription list as well.
Post by: Petch on Sun, 26 November 2017, 09:28:40
Here. tx1800v2 metal gasket.If I order a single gasket for an extra $20, do I still get the original 8 piece?
https://goo.gl/forms/ulXABMJv0cjwNTVs2 (https://goo.gl/forms/ulXABMJv0cjwNTVs2)
I sent email to persons on a subscription list as well.
Post by: boo on Sun, 26 November 2017, 09:32:51
Here. tx1800v2 metal gasket.
https://goo.gl/forms/ulXABMJv0cjwNTVs2 (https://goo.gl/forms/ulXABMJv0cjwNTVs2)
I sent email to persons on a subscription list as well.
Filled out. Thank you
Post by: Uleoja on Sun, 26 November 2017, 17:22:13
Here. tx1800v2 metal gasket.
https://goo.gl/forms/ulXABMJv0cjwNTVs2 (https://goo.gl/forms/ulXABMJv0cjwNTVs2)
I sent email to persons on a subscription list as well.
Filled out! I ordered both silver and gold so will need both.
Post by: unmuscular_michael on Mon, 27 November 2017, 13:59:12
Post by: Petch on Tue, 28 November 2017, 14:43:54
So do we get 8 piece or single piece acrylic now?
Edit: I checked the box about getting a copy of the form (it was in korean) but didn't get anything. Could you check if my form submitted please, popkorn?
Post by: KetchyKech on Thu, 30 November 2017, 10:30:36
Post by: zoomwalt on Thu, 30 November 2017, 11:33:19
Post by: duynguyenle on Thu, 30 November 2017, 14:32:35
Post by: popkorn62 on Fri, 01 December 2017, 22:36:19
Filled out form, but I don't think I have received invoice yet. Popkorn or Kin, could you please have a look for me? I can fill it out again if for some reason it didn't come through. Thanks!
Got your entry. He and I will go through them and invoice you guys soon.
Thank you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: boo on Mon, 04 December 2017, 08:56:33
Filled out form, but I don't think I have received invoice yet. Popkorn or Kin, could you please have a look for me? I can fill it out again if for some reason it didn't come through. Thanks!
Got your entry. He and I will go through them and invoice you guys soon.
Thank you.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Hi Kin/Popkorn.
Are we still expecting before christmas delivery? Would be awesome to build this keyboard over the holidays. Thank you!
Post by: popkorn62 on Mon, 04 December 2017, 17:13:00
Kin will update the list with the total for these extra invoices because there are people who ordered more parts as well. I will then send out invoices hopefully tonight or tomorrow (just as soon as he’s done).
Since EMS will take the most 5 business days, before Christmas is still very much the scenario.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: Petch on Mon, 04 December 2017, 18:30:21
Quick update:
Kin will update the list with the total for these extra invoices because there are people who ordered more parts as well. I will then send out invoices hopefully tonight or tomorrow (just as soon as he’s done).
Since EMS will take the most 5 business days, before Christmas is still very much the scenario.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Thanks popkorn
Would you be able to double-check my order before it's shipped please? As there are multiple boards with weights, cases, etc. A lot of the order was originally communicated via Telegraph over a number of months. I can provide paypal transaction date/numbers if you need them
Post by: odd on Tue, 05 December 2017, 05:00:01
My keymap works fine
I cannot connect to JigOn to reconfigure
I cannot disable the RGB backlighting
I have used multiple computers and cables without luck
Nothing has changed
This is driving me nuts, the fact it used to work and now does not and I cannot see anything wrong with the PCB. I have pics of my PCB if you want me to post them just let me know, thanks in advance all.
Post by: wholypantalones on Tue, 05 December 2017, 12:01:47
Post by: popkorn62 on Tue, 05 December 2017, 18:32:33
Apologize for the brief delay. Kin is super busy w classes.
I will go ahead and issue refunds to those who chose that option and invoice people who only ordered more metal gaskets (not films/switches/etc)
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Wed, 06 December 2017, 14:15:57
Will definitely try to get the invoices out today for people who ordered more metal gaskets.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Thu, 07 December 2017, 01:37:53
Thank you guys. Looks like we're wrapping up yeahhhhh
Post by: kin25 on Thu, 07 December 2017, 21:14:04
Finally 1 piece metal gaskets arrived.
Fortunately, Quality is good.
[attachimg=1]
[attachimg=2]
[attachimg=3]
I will start packing and shipping asap.
Post by: TerryMathews on Thu, 07 December 2017, 23:12:57
Post by: Uleoja on Thu, 07 December 2017, 23:20:23
Finally 1 piece metal gaskets arrived.
Fortunately, Quality is good.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I will start packing and shipping asap.
I am so excited! Thank you so much! And just to rehash. If I gave $40 extra I should be getting both colors right?
Post by: unmuscular_michael on Thu, 07 December 2017, 23:32:39
Post by: zoomwalt on Fri, 08 December 2017, 00:56:10
Those gaskets look amazing! I am so glad I ordered one!
I know! I half regret not getting one. That brass will look sick with the red case.
Post by: kin25 on Fri, 08 December 2017, 02:23:56
Those gaskets look amazing! I am so glad I ordered one!
I know! I half regret not getting one. That brass will look sick with the red case.
Sorry.. one piece metal gaskets were made of SS.
And they were plated by dry gold and silver plating.
Post by: Petch on Fri, 08 December 2017, 03:41:09
Post by: duynguyenle on Fri, 08 December 2017, 10:23:20
Finally 1 piece metal gaskets arrived.
Fortunately, Quality is good.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I will start packing and shipping asap.
I am so excited! Thank you so much! And just to rehash. If I gave $40 extra I should be getting both colors right?
$40 is for ONE colour, if you initially paid $20 in the original order, you will pay $20 more for ONE spacer. If you want both, it will be $60
Post by: duynguyenle on Fri, 08 December 2017, 10:25:22
Hopefully I can get these before the busy Christmas period. I know the postal system here is very congested and shipping is usually late this time of year.
Thanks Kin for your efforts with this GB and also Popkorn for helping.
Post by: popkorn62 on Fri, 08 December 2017, 11:12:05
Finally 1 piece metal gaskets arrived.
Fortunately, Quality is good.
(Attachment Link)
(Attachment Link)
(Attachment Link)
I will start packing and shipping asap.
I am so excited! Thank you so much! And just to rehash. If I gave $40 extra I should be getting both colors right?
Duynguyenle’s answer is correct.
======••••======
http://txkeyboards.com/
Please click LOG IN on register. Bottom page is for newsletter only.
Post by: popkorn62 on Fri, 08 December 2017, 19:01:12
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: duynguyenle on Fri, 08 December 2017, 20:17:45
We have 2 pending invoices but kin will start packing this weekend regardless.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Hopefully mine? 👀🙏 🤞
Post by: popkorn62 on Fri, 08 December 2017, 22:19:55
We have 2 pending invoices but kin will start packing this weekend regardless.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Hopefully mine?🤞
No
and only 1 left now.======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: boo on Sat, 09 December 2017, 18:05:06
We have 2 pending invoices but kin will start packing this weekend regardless.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Hopefully mine?
No
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Popkorn, If we arent expecting any invoices or changes, will those orders go out first?
Post by: duynguyenle on Sun, 10 December 2017, 05:45:00
Post by: popkorn62 on Sun, 10 December 2017, 05:49:42
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: bmilcs on Sun, 10 December 2017, 13:50:18
Post by: duynguyenle on Sun, 10 December 2017, 14:36:51
IS IT TOO LATE TO HOP ON IT
YES JUST WAIT TILL ALL GB ORDERS HAS FINISHED, IF THERE ARE ANY EXTRAS YOU WILL FIND OUT THEN
Post by: ye_cole on Sun, 10 December 2017, 15:06:00
Post by: Petch on Sun, 10 December 2017, 15:22:13
How much will extras be when compared to the GB price?I bought an extra TX75 and it was $308 vs original $280 (and that could have been down to exchange difference honestly). Kin doesn't seem to do that sort of thing and isn't very keen on creating aftermarkets as far as I can tell - he wants to just sell readily available stuff instead of running GBs/preorders
Post by: duynguyenle on Thu, 14 December 2017, 16:34:38
Would you be able to put up a spreadsheet with tracking information so we can have an easy place to find the status of our orders and tracking information? This makes it much easier to see if there are any updates!
Thanks!
Post by: boo on Sat, 16 December 2017, 03:39:55
All invoices were paid. Kin is currently packing. Shipments will go out next week. Cheers!
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Popkorn, are we still expecting before xmas delivery?
Post by: roostrc0gburn on Sat, 16 December 2017, 11:49:20
Post by: duynguyenle on Mon, 18 December 2017, 16:08:34
Post by: popkorn62 on Mon, 18 December 2017, 23:39:58
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: boo on Tue, 19 December 2017, 14:55:01
I am so sorry you guys. I’ve been busy w some personal business and didn’t come to GH until today. I just spoke to kin and he has been busy w other commitments as well. This is not something we want and I apologize for the inconvenience. I hope to see kin ship out the orders next week.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Thanks Popkorn for the update!
Sent from my iPhone using Tapatalk
Post by: duynguyenle on Tue, 19 December 2017, 17:21:58
I am so sorry you guys. I’ve been busy w some personal business and didn’t come to GH until today. I just spoke to kin and he has been busy w other commitments as well. This is not something we want and I apologize for the inconvenience. I hope to see kin ship out the orders next week.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Thanks for the update, I look forward to hearing good news in the near future :)
Post by: kin25 on Sun, 24 December 2017, 09:15:02
I am so sorry for late shipping.
I will send them all next week.
[attachimg=1]
Post by: smittysteve on Sun, 24 December 2017, 09:26:48
Is that the dark grey? Stunning.
Post by: poolside on Sun, 24 December 2017, 16:55:41
What is this roll for?
[attach=1]
Post by: duynguyenle on Sun, 24 December 2017, 17:25:19
Please do spend time with your family too! Don't spend the whole time packing ;)
Post by: kin25 on Sun, 24 December 2017, 20:03:22
Great news :)
What is this roll for?
(Attachment Link)
It is masking tape for 8 pieces gasket.
You can use it to stick the gasket on top case.
Post by: kin25 on Sun, 24 December 2017, 20:05:13
The board and case look awesome Kin and we’re all excited to see these babies. But please, enjoy the holidays with your family and friends too. Keyboards can wait. Have a very Merry Christmas!!
Is that the dark grey? Stunning.
Merry christmas.
It is black tx1800v2.
Post by: kin25 on Sun, 24 December 2017, 20:07:04
Masking tape is used like this pic.
Post by: poolside on Tue, 26 December 2017, 03:51:21
(Attachment Link)
Masking tape is used like this pic.
Convenient!
Post by: Uleoja on Wed, 27 December 2017, 17:34:09
Post by: roostrc0gburn on Wed, 27 December 2017, 18:08:15
Post by: TerryMathews on Wed, 27 December 2017, 18:17:01
Post by: duynguyenle on Wed, 27 December 2017, 18:28:04
Post by: boo on Wed, 27 December 2017, 20:40:56
Post by: Petch on Wed, 27 December 2017, 21:04:10
Post by: kin25 on Wed, 27 December 2017, 21:19:51
Sorry..
Everyday a few package shipping.
Post by: boo on Sat, 30 December 2017, 13:23:59
Will build and upload pictures.
Perfect condition. Worth the wait.
Post by: duynguyenle on Sat, 30 December 2017, 13:28:34
Cannot wait :D
Post by: Petch on Sat, 30 December 2017, 14:46:19
Post by: TheZissou on Sat, 30 December 2017, 19:20:12
Post by: Puddsy on Sat, 30 December 2017, 20:34:44
Received mine today was well. Super excited!
im assuming you mean shipping notification and not board?
startled me
Post by: Jae-3soteric on Sun, 31 December 2017, 06:36:55
Post by: kin25 on Sun, 31 December 2017, 07:12:53
Post by: duynguyenle on Sun, 31 December 2017, 11:47:02
Happy New Year~~~
Happy New Year Kin!! ;D
Post by: Puddsy on Sun, 31 December 2017, 11:55:29
Happy New Year~~~
:)
Post by: KetchyKech on Sun, 31 December 2017, 17:01:12
Post by: Petch on Sun, 31 December 2017, 17:22:54
received my grey kit and it is stunning!! happy new year! :pPics please!
And happy new year everyone
Post by: smittysteve on Sun, 31 December 2017, 17:30:26
Saw photos of my 1800 and Stan together... one heavy-ass box shipping Tuesday. Yahoooooo!!
Happy New Year to Kin and all!
Post by: ricyuyc on Sun, 31 December 2017, 19:22:38
Happy New Year~~~Happy New Year Kin, Happy New Year everybody.
Post by: popkorn62 on Mon, 01 January 2018, 21:21:52
Again Happy New Year everyone
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: unmuscular_michael on Mon, 01 January 2018, 21:51:59
Edit: just got shipping info from kin that I must have missed. Thanks!
Post by: duynguyenle on Tue, 02 January 2018, 05:26:36
Post by: ricyuyc on Tue, 02 January 2018, 06:27:24
(https://farm5.staticflickr.com/4692/39418055472_6c74fdf0d6_h.jpg)
(https://farm5.staticflickr.com/4596/39418050752_fd09d2c1dd_h.jpg)
(https://farm5.staticflickr.com/4588/39418054982_6f82cb5c19_h.jpg)
(https://farm5.staticflickr.com/4589/27671436629_3f1e06f3e9_h.jpg)
(https://farm5.staticflickr.com/4595/39418055082_b71cb2aca7_h.jpg)
(https://farm5.staticflickr.com/4679/39418052842_bda724e4b2_h.jpg)
(https://farm5.staticflickr.com/4738/27671435969_07947a52e0_h.jpg)
(https://farm5.staticflickr.com/4589/39418050532_63b1273993_h.jpg)
(https://farm5.staticflickr.com/4600/39418052362_206daf57b3_h.jpg)
(https://farm5.staticflickr.com/4739/27671435259_e5db9857c6_h.jpg)
(https://farm5.staticflickr.com/4725/27671434509_e5fc4a83d3_h.jpg)
The quality of CNC and Anodizing are both extremely high.
I just realized that I forgot to add the protection case into my order.
Post by: Petch on Tue, 02 January 2018, 06:58:10
Post by: ricyuyc on Tue, 02 January 2018, 07:10:28
That black is so nice... hopefully titan grey is just as nice so I have no regrets :DMind is Ti grey
Post by: Petch on Tue, 02 January 2018, 07:11:25
Really? Gonna blame ****ty work monitors for that one hahaThat black is so nice... hopefully titan grey is just as nice so I have no regrets :DMind is Ti grey
Post by: boo on Tue, 02 January 2018, 10:24:40
Post by: DillonHightower on Thu, 04 January 2018, 17:04:15
Post by: Puddsy on Thu, 04 January 2018, 17:13:50
Is there still a plan to have a few extra to sell after the fact? I though I remember reading that there was going to be a few left over after the fact ?
i think he's already selling them on telegram, send him a message
Post by: DillonHightower on Thu, 04 January 2018, 17:17:47
Is there still a plan to have a few extra to sell after the fact? I though I remember reading that there was going to be a few left over after the fact ?
i think he's already selling them on telegram, send him a message
Done and done,
Thanks dude! You always seem to have the answer to sooth the soul a little.
Post by: Uleoja on Thu, 04 January 2018, 17:26:05
Post by: duynguyenle on Fri, 05 January 2018, 11:26:59
The carrying bags are amazing though!
Post by: shadowrealmwarez on Fri, 05 January 2018, 12:28:08
Post by: Uleoja on Fri, 05 January 2018, 13:19:27
Post by: megaforce on Fri, 05 January 2018, 14:01:22
Quick question for those who have built the PCB. Did you have to use LED spacers for the LED's supplied? Or do you push them all the way down and solder?
It's not required, but nice to have so you don't have to guessinamte how much of the legs you need to snip.
Post by: popkorn62 on Fri, 05 January 2018, 15:35:29
Address will be required at checkout so it’s always better to create an account and save your address there. Shipping price will be automatically calculated depending on your zipcode.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: shadowrealmwarez on Fri, 05 January 2018, 15:36:52
I am currently testing the website for orders. Expect to see it’s ready to sell tx1800 v2 extras (all B-stocks) this Sunday.
Address will be required at checkout so it’s always better to create an account and save your address there. Shipping price will be automatically calculated depending on your zipcode.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Excitement! Any idea on cost or available colors/options?
Post by: popkorn62 on Fri, 05 January 2018, 16:34:26
I am currently testing the website for orders. Expect to see it’s ready to sell tx1800 v2 extras (all B-stocks) this Sunday.
Address will be required at checkout so it’s always better to create an account and save your address there. Shipping price will be automatically calculated depending on your zipcode.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Excitement! Any idea on cost or available colors/options?
Ill know once kin wakes up :)
Post by: popkorn62 on Sun, 07 January 2018, 14:49:39
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: Prankk on Sun, 07 January 2018, 18:34:12
Post by: wholypantalones on Sun, 07 January 2018, 18:36:54
Keyboard is all built and working wonderfully. Does anyone have the default keymapping that I can load into jigon and modify from there? I don't want to change a whole lot, just add some led control stuff. Thanks!
Doesn't JiGon contain a folder with the default keymap when you download it? Pretty sure my version did.
Post by: Prankk on Sun, 07 January 2018, 18:39:04
Keyboard is all built and working wonderfully. Does anyone have the default keymapping that I can load into jigon and modify from there? I don't want to change a whole lot, just add some led control stuff. Thanks!
Doesn't JiGon contain a folder with the default keymap when you download it? Pretty sure my version did.
I guess I first should have asked the question if what i was looking at in jigon when i first open it is the default layout for this board. I can't tell.
Post by: wholypantalones on Sun, 07 January 2018, 18:44:13
Keyboard is all built and working wonderfully. Does anyone have the default keymapping that I can load into jigon and modify from there? I don't want to change a whole lot, just add some led control stuff. Thanks!
Doesn't JiGon contain a folder with the default keymap when you download it? Pretty sure my version did.
I guess I first should have asked the question if what i was looking at in jigon when i first open it is the default layout for this board. I can't tell.
It should be, the PCB should already have the default keymap installed. You have to connect to the PCB in the software and modify it from there.
I would suggest updating firmware first and make sure the JiGon and firmware version match or you are going to have problems.
Post by: kin25 on Sun, 07 January 2018, 19:57:55
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58)
Jigon http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9)
New Firmware have a few 'cheat keys'
"bforceled" - LED on (not possible to save)
"dforceled" - LED off (not possible to save)
"showmergb" -RGB on (possible to save)
"turnoffrgb" - RGB off (possible to save)
"nomentionm" - not show mention when macro record (not possible to save)
"onmentionm" - show mention when macro record (not possible to save)
you can use cheat keys.
after typing push [enter] key.
very easy and good idea!
Post by: wholypantalones on Sun, 07 January 2018, 20:00:11
L3 firmware Dec 9 2017
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58)
Jigon http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9)
New Firmware have a few 'cheat keys'
"bforceled" - LED on (not possible to save)
"dforceled" - LED off (not possible to save)
"showmergb" -RGB on (possible to save)
"turnoffrgb" - RGB off (possible to save)
"nomentionm" - not show mention when macro record (not possible to save)
"onmentionm" - show mention when macro record (not possible to save)
you can use cheat keys.
after typing push [enter] key.
very easy and good idea!
Nice, thanks kin!
Post by: Puddsy on Mon, 08 January 2018, 10:13:03
L3 firmware Dec 9 2017
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58)
Jigon http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9)
New Firmware have a few 'cheat keys'
"bforceled" - LED on (not possible to save)
"dforceled" - LED off (not possible to save)
"showmergb" -RGB on (possible to save)
"turnoffrgb" - RGB off (possible to save)
"nomentionm" - not show mention when macro record (not possible to save)
"onmentionm" - show mention when macro record (not possible to save)
you can use cheat keys.
after typing push [enter] key.
very easy and good idea!
Thanks, those were features I was looking for
Post by: duynguyenle on Mon, 08 January 2018, 15:46:13
L3 firmware Dec 9 2017
http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4903487&sid=ca86c3f47f41b9b0650a95630f958e58)
Jigon http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9 (http://kbdlab.co.kr/?module=file&act=procFileDownload&file_srl=4320093&sid=a2dfd681007fec4c849850a5530a4df9)
New Firmware have a few 'cheat keys'
"bforceled" - LED on (not possible to save)
"dforceled" - LED off (not possible to save)
"showmergb" -RGB on (possible to save)
"turnoffrgb" - RGB off (possible to save)
"nomentionm" - not show mention when macro record (not possible to save)
"onmentionm" - show mention when macro record (not possible to save)
you can use cheat keys.
after typing push [enter] key.
very easy and good idea!
Does this mean that there's a subroutine in the firmware always listening out for keystrokes?
Not saying I don't understand the feature and the justification for it being there, but this seems like something that could be exploited... Hopefully this hobby is small enough that it's not worth someone's time and effort to go after this attack surface. Persistent keylogger hidden in a custom keyboard sounds pretty scary
I've got a copy of the last Jigon firmware (April 2017), I'll stick with that one for now, it works well enough for me and I haven't encountered any bugs yet!
Post by: OracleKev on Mon, 08 January 2018, 19:33:24
Does this mean that there's a subroutine in the firmware always listening out for keystrokes?I wouldn't worry too much. ;)
Not saying I don't understand the feature and the justification for it being there, but this seems like something that could be exploited... Hopefully this hobby is small enough that it's not worth someone's time and effort to go after this attack surface. Persistent keylogger hidden in a custom keyboard sounds pretty scary
I've got a copy of the last Jigon firmware (April 2017), I'll stick with that one for now, it works well enough for me and I haven't encountered any bugs yet!
Keyboard firmwares by design have to keep the states of each key since it works by 'scanning' changes in those states.
Many full featured firmwares support user recordable macros and leader key macros, and for those features, the firmware needs to keep track of the last x keystrokes. This means JigOn isn't that different from others.
Even if you do have a malicious firmware installed, it needs to hand off the information it recorded somewhere specific (preferably undetected) which is virtually impossible to do within the confines of the USB HID standard.
This isn't a weak link in the chain. There are many other juicier targets.
Post by: duynguyenle on Mon, 08 January 2018, 19:48:45
Does this mean that there's a subroutine in the firmware always listening out for keystrokes?I wouldn't worry too much. ;)
Not saying I don't understand the feature and the justification for it being there, but this seems like something that could be exploited... Hopefully this hobby is small enough that it's not worth someone's time and effort to go after this attack surface. Persistent keylogger hidden in a custom keyboard sounds pretty scary
I've got a copy of the last Jigon firmware (April 2017), I'll stick with that one for now, it works well enough for me and I haven't encountered any bugs yet!
Keyboard firmwares by design have to keep the states of each key since it works by 'scanning' changes in those states.
Many full featured firmwares support user recordable macros and leader key macros, and for those features, the firmware needs to keep track of the last x keystrokes. This means JigOn isn't that different from others.
Even if you do have a malicious firmware installed, it needs to hand off the information it recorded somewhere specific (preferably undetected) which is virtually impossible to do within the confines of the USB HID standard.
This isn't a weak link in the chain. There are many other juicier targets.
Fair point, I suppose I forgot to take the tinfoil hat off!
Post by: zoomwalt on Mon, 08 January 2018, 21:20:57
(https://imgur.com/rbCeY9U.jpeg)
(https://imgur.com/etyF9ig.jpeg)
(https://imgur.com/bPDUm8m.jpeg)
(https://imgur.com/slLON0o.jpeg)
I went with the assembled option. How do I change the RGB underglow?
Post by: kin25 on Mon, 08 January 2018, 21:37:33
Got mine!Show Image(https://imgur.com/rbCeY9U)Show Image(https://imgur.com/etyF9ig)Show Image(https://imgur.com/bPDUm8m)Show Image(https://imgur.com/slLON0o)
I went with the assembled option. How do I change the RGB underglow?
Use jigon.
Post by: Petch on Tue, 09 January 2018, 03:31:25
Got mine!Show Image(https://imgur.com/rbCeY9U)Show Image(https://imgur.com/etyF9ig)Show Image(https://imgur.com/bPDUm8m)Show Image(https://imgur.com/slLON0o)
I went with the assembled option. How do I change the RGB underglow?
You need to link the actual file in those links for the img tag to work, so https://i.imgur.com/etyF9ig.jpg instead of https://imgur.com/etyF9ig
Post by: zoomwalt on Tue, 09 January 2018, 09:35:52
Got mine!Show Image(https://imgur.com/rbCeY9U)Show Image(https://imgur.com/etyF9ig)Show Image(https://imgur.com/bPDUm8m)Show Image(https://imgur.com/slLON0o)
I went with the assembled option. How do I change the RGB underglow?
You need to link the actual file in those links for the img tag to work, so https://i.imgur.com/etyF9ig.jpg instead of https://imgur.com/etyF9ig
Woops. thanks for letting me know. I was wondering why it wasn't showing up.
Kin - I love this board. Assembly option was definitely the way to go!
Post by: kin25 on Tue, 09 January 2018, 09:38:53
Got mine!Show Image(https://imgur.com/rbCeY9U)Show Image(https://imgur.com/etyF9ig)Show Image(https://imgur.com/bPDUm8m)Show Image(https://imgur.com/slLON0o)
I went with the assembled option. How do I change the RGB underglow?
You need to link the actual file in those links for the img tag to work, so https://i.imgur.com/etyF9ig.jpg instead of https://imgur.com/etyF9ig
Woops. thanks for letting me know. I was wondering why it wasn't showing up.
Kin - I love this board. Assembly option was definitely the way to go!
thank you.
I am happy to hear that.
Post by: shadowrealmwarez on Tue, 09 January 2018, 13:03:30
Post by: popkorn62 on Tue, 09 January 2018, 13:31:39
I got to check out too late, I had a black TX-CP in my cart and it was gone, alas. Any way to get on a waiting list for a v2?
Hi there,
There is no waiting list. As long as you register an account (top right of the page) or put your email on the subscriber list (bottom of the page), you will be notified. We will stock 50 TX1800 v2 extras so it will not be gone in 5 minutes like this time lol.
There maybe more TX-CPs coming. Chance is slim though...
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: shadowrealmwarez on Tue, 09 January 2018, 13:34:02
I got to check out too late, I had a black TX-CP in my cart and it was gone, alas. Any way to get on a waiting list for a v2?
Hi there,
There is no waiting list. As long as you register an account (top right of the page) or put your email on the subscriber list (bottom of the page), you will be notified. We will stock 50 TX1800 v2 extras so it will not be gone in 5 minutes like this time lol.
There maybe more TX-CPs coming. Chance is slim though...
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
That's awesome! Thanks so much, any idea on cost so I can prepare my wallet, shipping would be US.
Post by: gutsack on Tue, 09 January 2018, 13:40:34
There is no waiting list. As long as you register an account (top right of the page) or put your email on the subscriber list (bottom of the page), you will be notified. We will stock 50 TX1800 v2 extras so it will not be gone in 5 minutes like this time lol.
I'm confused by the order form for v2 on the website, it doesn't list color at all as an option, but doesn't specify which color you'd be ordering. Can you clarify?
Post by: gutsack on Tue, 09 January 2018, 13:42:25
Post by: Eggplant on Tue, 09 January 2018, 13:43:27
I got to check out too late, I had a black TX-CP in my cart and it was gone, alas. Any way to get on a waiting list for a v2?
Hi there,
There is no waiting list. As long as you register an account (top right of the page) or put your email on the subscriber list (bottom of the page), you will be notified. We will stock 50 TX1800 v2 extras so it will not be gone in 5 minutes like this time lol.
There maybe more TX-CPs coming. Chance is slim though...
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Dang, I saw them the TX-CPs come up on my phone, and by the time I got to my computer, they were all gone :(
Post by: popkorn62 on Tue, 09 January 2018, 13:47:42
Oh, sorry, I was confused... you're only selling TX-CP extras, not TX1800v2? Are extras for that going to be sold?
Yeah, as I said above. TX1800 v2 extras will be sold soon. We will notify everyone on our mailing list. It’s always better to register an account and save your address on there to speed up checkout process.
MORE THAN 50 TX1800 v2 will be available.
We will also put up bags, PCBs for all TX series boards, switch films, etc. so look out!
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: megaforce on Tue, 09 January 2018, 14:45:15
Are we sill slated for the 15th for those dank new ones?
Post by: Krytone on Tue, 09 January 2018, 19:54:36
Post by: popkorn62 on Tue, 09 January 2018, 20:04:21
Post by: gr4v3m4n on Tue, 09 January 2018, 20:40:51
man, i hope it wont be soon enough. my wallet still flat for atleast 2 more months :)I got to check out too late, I had a black TX-CP in my cart and it was gone, alas. Any way to get on a waiting list for a v2?
Hi there,
There is no waiting list. As long as you register an account (top right of the page) or put your email on the subscriber list (bottom of the page), you will be notified. We will stock 50 TX1800 v2 extras so it will not be gone in 5 minutes like this time lol.
There maybe more TX-CPs coming. Chance is slim though...
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Sent from my iPhone using Tapatalk
Post by: DillonHightower on Tue, 09 January 2018, 20:42:28
subscribed! need to get atleast 2 1800v2 :-[
Dam baller. Leave some for the rest of us. 😩
Post by: Krytone on Tue, 09 January 2018, 21:01:37
lol, only one for me and the other is for my sister :psubscribed! need to get atleast 2 1800v2 :-[
Dam baller. Leave some for the rest of us. 😩
Post by: popkorn62 on Tue, 09 January 2018, 21:36:59
man, i hope it wont be soon enough. my wallet still flat for atleast 2 more months :)I got to check out too late, I had a black TX-CP in my cart and it was gone, alas. Any way to get on a waiting list for a v2?
Hi there,
There is no waiting list. As long as you register an account (top right of the page) or put your email on the subscriber list (bottom of the page), you will be notified. We will stock 50 TX1800 v2 extras so it will not be gone in 5 minutes like this time lol.
There maybe more TX-CPs coming. Chance is slim though...
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Sent from my iPhone using Tapatalk
very shortly. kin is already packing up txcp orders as we speak.
p/s: i forgot to include brass weight option, anyone who ordered and wanted to order that now please look out for an email from kin. thank you!
Post by: popkorn62 on Tue, 09 January 2018, 21:37:47
i love kin.
Are we sill slated for the 15th for those dank new ones?
new ones? did your order get delayed? sorry i'm confused lol
Post by: megaforce on Tue, 09 January 2018, 21:49:19
i love kin.
Are we sill slated for the 15th for those dank new ones?
new ones? did your order get delayed? sorry i'm confused lol
Talking about the 60/65/84se! :D
Post by: popkorn62 on Tue, 09 January 2018, 22:19:32
i love kin.
Are we sill slated for the 15th for those dank new ones?
new ones? did your order get delayed? sorry i'm confused lol
Talking about the 60/65/84se! :D
that makes sense ;D
i think it will be the end of jan. selling tx1800 v2 extras first i believe.
Post by: kin25 on Tue, 09 January 2018, 22:52:48
in Feb I will ship them.
I am sorry for making you wait.
Post by: poolside on Wed, 10 January 2018, 01:45:08
Are there going to be blue TX-1800 V2 extras?
Post by: heckenjoni on Wed, 10 January 2018, 03:29:39
Post by: kin25 on Wed, 10 January 2018, 05:41:15
is there any date for the extra tx1800 v2 (looking for a silver or blue one), i am very busy at work right now so i cant check my e-mail everyday just an estimated timeline ? (like next week or the week after idk) very hyped for the tx1800 ! :)
I sorry.
I was sick in bed.
I am packing txcp extras to buyers who bought it yesterday.
after shipping txcp extras, I will take pictures and post them in txkeyboards.com
thank you.
Post by: DillonHightower on Wed, 10 January 2018, 06:19:43
is there any date for the extra tx1800 v2 (looking for a silver or blue one), i am very busy at work right now so i cant check my e-mail everyday just an estimated timeline ? (like next week or the week after idk) very hyped for the tx1800 ! :)
I sorry.
I was sick in bed.
I am packing txcp extras to buyers who bought it yesterday.
after shipping txcp extras, I will take pictures and post them in txkeyboards.com
thank you.
Feel better dude. No rush For great things.
Post by: popkorn62 on Wed, 10 January 2018, 11:54:58
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: duynguyenle on Wed, 10 January 2018, 12:16:54
Hi guys and gals, I’m looking for good pics of assembled TX1800 v2 in various colors. Please pm me for pics. HQ pics plzzzz thank you guyz
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Was planning to build mine this weekend!
Post by: popkorn62 on Wed, 10 January 2018, 12:59:50
Hi guys and gals, I’m looking for good pics of assembled TX1800 v2 in various colors. Please pm me for pics. HQ pics plzzzz thank you guyz
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Was planning to build mine this weekend!
Yep! Feel free to send me 4 of your best pics!
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Post by: boo on Wed, 10 January 2018, 16:54:32
big regret not getting one :(
Post by: roostrc0gburn on Wed, 10 January 2018, 17:52:04
(https://i.imgur.com/BSof8Az.jpg)
(https://i.imgur.com/ywoGeT1.jpg)
(https://i.imgur.com/sl4gbqc.jpg)
(https://i.imgur.com/nRsnbeM.jpg)
the gasket and the plate are two separate parts, for those who don't know how these are assembled
Post by: poolside on Wed, 10 January 2018, 18:12:00
Post by: ihalatch on Wed, 10 January 2018, 18:13:14
Post by: ihalatch on Wed, 10 January 2018, 18:13:56
Post by: kin25 on Wed, 10 January 2018, 18:27:27
Kin are you planning TX1800v3?
I have no plan for tx1800v3.
V1 and v2 were hard to make..
All parts made troubles more than once.
It was not ordinary.
I hope this v2 is the last tx1800 for me.
Post by: gr4v3m4n on Wed, 10 January 2018, 18:53:02
ahh sheit, i hope i got one of the extra...this is my dream board.Kin are you planning TX1800v3?
I have no plan for tx1800v3.
V1 and v2 were hard to make..
All parts made troubles more than once.
It was not ordinary.
I hope this v2 is the last tx1800 for me.
Sent from my iPhone using Tapatalk
Post by: zoomwalt on Wed, 10 January 2018, 19:29:05
ahh sheit, i hope i got one of the extra...this is my dream board.Kin are you planning TX1800v3?
I have no plan for tx1800v3.
V1 and v2 were hard to make..
All parts made troubles more than once.
It was not ordinary.
I hope this v2 is the last tx1800 for me.
Sent from my iPhone using Tapatalk
The extras aren't for sale yet, are they?
Post by: ihalatch on Wed, 10 January 2018, 19:33:11
Oh, no I hoped I can get one later. That's why I'd swapped my TX1800v2 spot for a TX-CP one. This is very unfortunate. TX1800 should be a seminal part of evryones collection.Kin are you planning TX1800v3?
I have no plan for tx1800v3.
V1 and v2 were hard to make..
All parts made troubles more than once.
It was not ordinary.
I hope this v2 is the last tx1800 for me.
Post by: LifeZ on Wed, 10 January 2018, 19:43:20
Take care your body
I make LZ 1800 V3 ;D
Post by: ihalatch on Wed, 10 January 2018, 20:08:31
Okay kin~!!
Take care your body
I make LZ 1800 V3 ;D
This, on the other hand, is a great news. LZ that'd be awesome.
Post by: wholypantalones on Wed, 10 January 2018, 20:30:38
Were there blue TX-CP extras available?
Silver, black and Titan gray b-stock was all that was listed.
Post by: OmegaSupreme on Wed, 10 January 2018, 21:10:23
Okay kin~!!
Take care your body
I make LZ 1800 V3 ;D
This, on the other hand, is a great news. LZ that'd be awesome.
I would be down for a LZ 1800 as well! :)
Post by: kin25 on Wed, 10 January 2018, 22:52:46
Okay kin~!!
Take care your body
I make LZ 1800 V3 ;D
good idea!!
Post by: boo on Wed, 10 January 2018, 23:50:56
Post by: DillonHightower on Thu, 11 January 2018, 00:32:03
Anyone is California ordering something from Kin soon? I would like to know if I can proxy some small items with your order :) thank you!
I’ll be getting an b stock 1800 and I’m in Colorado
Post by: boo on Thu, 11 January 2018, 00:33:45
Anyone is California ordering something from Kin soon? I would like to know if I can proxy some small items with your order :) thank you!
I’ll be getting an b stock 1800 and I’m in Colorado
I’ll pm you
Post by: zekkin on Thu, 11 January 2018, 07:15:14
is there any date for the extra tx1800 v2 (looking for a silver or blue one), i am very busy at work right now so i cant check my e-mail everyday just an estimated timeline ? (like next week or the week after idk) very hyped for the tx1800 ! :)
I sorry.
I was sick in bed.
I am packing txcp extras to buyers who bought it yesterday.
after shipping txcp extras, I will take pictures and post them in txkeyboards.com
thank you.
Take care of yourself kin!
Healthy kin == healthy keyboards ;D
Post by: kin25 on Thu, 11 January 2018, 08:29:21
is there any date for the extra tx1800 v2 (looking for a silver or blue one), i am very busy at work right now so i cant check my e-mail everyday just an estimated timeline ? (like next week or the week after idk) very hyped for the tx1800 ! :)
I sorry.
I was sick in bed.
I am packing txcp extras to buyers who bought it yesterday.
after shipping txcp extras, I will take pictures and post them in txkeyboards.com
thank you.
Take care of yourself kin!
Healthy kin == healthy keyboards ;D
Thank you. :)
Post by: Uleoja on Thu, 11 January 2018, 14:00:46
i bought my kit second hand, but received all the extras from kin last week. just wanted to share a couple potatoes with the gold gasket. this is shaping up just like i dreamed :cool:Show Image(https://i.imgur.com/BSof8Az.jpg)Show Image(https://i.imgur.com/ywoGeT1.jpg)Show Image(https://i.imgur.com/sl4gbqc.jpg)Show Image(https://i.imgur.com/nRsnbeM.jpg)
the gasket and the plate are two separate parts, for those who don't know how these are assembled
Hey we got the same board! Same colors and everything!
Post by: poolside on Thu, 11 January 2018, 16:02:56
Okay kin~!!
Take care your body
I make LZ 1800 V3 ;D
Great news!
May I suggest to design the NCS indicators area with rectangular metal inserts, similarly to the NCS stickers (?) from the LK-1800fe? Those look so nice.
[attach=1]
:cool:
Were there blue TX-CP extras available?
Silver, black and Titan gray b-stock was all that was listed.
Thanks, my wallet is safe for now.
Post by: ihalatch on Thu, 11 January 2018, 17:34:05
Okay kin~!!
Take care your body
I make LZ 1800 V3 ;D
Great news!
May I suggest to design the NCS indicators area with rectangular metal inserts, similarly to the NCS stickers (?) from the LK-1800fe? Those look so nice.
(Attachment Link)
:cool:Were there blue TX-CP extras available?
Silver, black and Titan gray b-stock was all that was listed.
Thanks, my wallet is safe for now.
+1
Post by: popkorn62 on Fri, 12 January 2018, 16:02:01
Please stop sending me pm’s asking when extras are going to be available. I don’t want to be mean and I understand you guys cannot wait to purchase it but again, as I said, there will be plenty of extras, A-stocks and B-stocks w/ various colors.
Register an account and wait to be notified. I don’t know when. Kin doesn’t know when. Because once he got it ready, I will have to have the site ready as well and that takes time.
At least price is updated so you will know how much that costs.
Shipping is around: $30-$40 to Asia, $80-$90 to America/Canada, $60-$70 to Europe. Shipping is automatically calculated by weight so it is quite precise.
Thank you guys and happy long weekend!!
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: kin25 on Fri, 12 January 2018, 18:43:50
Except blue color.
Plz wait for a few days.
I will post them gradually in txkeyboards.com
Post by: gr4v3m4n on Fri, 12 January 2018, 19:42:48
is there an option for this kind of difuser, im kind of confuse about the option for metal gasket.(https://uploads.tapatalk-cdn.com/20180113/22fa6e809254d2f8418110c2a32abcf8.jpg)
Sent from my iPhone using Tapatalk
Post by: avid on Fri, 12 January 2018, 22:14:50
Metal gasket = extra add-on option.
Post by: kin25 on Fri, 12 January 2018, 23:37:43
is there an option for this kind of difuser, im kind of confuse about the option for metal gasket.Show Image(https://uploads.tapatalk-cdn.com/20180113/22fa6e809254d2f8418110c2a32abcf8.jpg)
Sent from my iPhone using Tapatalk
Basically
8 pieces acrylic diffuser and 1piece acrylic diffuser are included.
additonal $40
8 pieces and 1 piece metal gaskets.
Post by: poolside on Sat, 13 January 2018, 01:56:17
There are enough tx1800v2 extras.
Except blue color.
Plz wait for a few days.
I will post them gradually in txkeyboards.com
Oh no, no blues. Thanks.
Post by: popkorn62 on Wed, 17 January 2018, 03:25:35
Get your wallet ready ( ͡ ° ͜ʖ ͡ ° )
Colors available: Titan Grey, Black, Red, Silver and Olive.
ALL B-STOCKS!!! YES I KNOW I MISSPOKE FROM LAST TIME IM SORRY I FORGOT PLS DONT HATE ME.
There will be extra PCBs (87, 75, 1800) for US + international buyers.
You guys can go check on the colors now :)
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: gr4v3m4n on Wed, 17 January 2018, 06:48:26
TX1800 v2 extras will be on sale ETA in 2 days.so no a-stock? only that 6 board available?
Get your wallet ready ( ͡ ° ͜ʖ ͡ ° )
Colors available: Titan Grey, Black, Red, Silver and Olive.
ALL B-STOCKS!!! YES I KNOW I MISSPOKE FROM LAST TIME IM SORRY I FORGOT PLS DONT HATE ME.
There will be extra PCBs (87, 75, 1800) for US + international buyers.
You guys can go check on the colors now :)
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Sent from my iPhone using Tapatalk
Post by: kin25 on Wed, 17 January 2018, 06:59:56
There are A.stock as well.
Post by: ctrlX on Wed, 17 January 2018, 12:40:30
TX1800 v2 extras will be on sale ETA in 2 days.
Get your wallet ready ( ͡ ° ͜ʖ ͡ ° )
Colors available: Titan Grey, Black, Red, Silver and Olive.
ALL B-STOCKS!!! YES I KNOW I MISSPOKE FROM LAST TIME IM SORRY I FORGOT PLS DONT HATE ME.
There will be extra PCBs (87, 75, 1800) for US + international buyers.
You guys can go check on the colors now :)
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Nice, finally! Need to pickup a extra TX-87 PCB as mine went fubar on day one.
Post by: Paopawdecarabao on Wed, 17 January 2018, 13:38:29
Post by: Petch on Wed, 17 January 2018, 13:43:00
What does B-Stock mean? Some qc issues or minor defects?Pretty much, usually minor scratches and anodizing flaws
Post by: Paopawdecarabao on Wed, 17 January 2018, 13:56:08
Need opinions and/or suggestions. I really want the olive green as I love green to pair with GMK Terminal but I also want to switch to GMK Laser time to time. Would Olive green match well with the laser or other key caps?
If I am getting a color which would be the safest choice? Per your experience Thank you
*PS Still new to this mech hobby
Post by: popkorn62 on Wed, 17 January 2018, 14:02:15
For the guy above me, I think black is the safest bet for you if you want both of those keycaps on it.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: A.L. on Wed, 17 January 2018, 15:45:31
Post by: Krytone on Wed, 17 January 2018, 20:38:58
Post by: popkorn62 on Thu, 18 January 2018, 02:12:48
is there a way to identify what youre selecting in the site if A or B stock? Also does A stock have some defects aswell? Thanks!
It’ll clearly state which one is B-stock and which one is A-stock. Also, when you choose the variant, it’ll take you to the page with more pics of that product.
P/S: Currently figuring out the domestic US shipping plugin for PCBs. Your wallet will be safe for another 2 days LOL
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: Krytone on Thu, 18 January 2018, 02:14:54
Thanks man :)is there a way to identify what youre selecting in the site if A or B stock? Also does A stock have some defects aswell? Thanks!
It’ll clearly state which one is B-stock and which one is A-stock. Also, when you choose the variant, it’ll take you to the page with more pics of that product.
P/S: Currently figuring out the domestic US shipping plugin for PCBs. Your wallet will be safe for another 2 days LOL
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: A.L. on Thu, 18 January 2018, 07:23:30
Post by: gr4v3m4n on Thu, 18 January 2018, 07:56:52
Hi, i am very interested in a grey or blue one (more into blue) and if possible a stock, someone here talked about "new blue ones", i messaged kin25 on telegram and he told me there is no a-stock Grey or blue, can someone explain this to me ? sorry i am new and maybe i overlooked something .. just Need to know if there will be tx1800 sold in blue or if i have to get another Color, rly want one of this boards !a stock means its new without any defects, b stock means new with defects ussually some blemish or scratch
Sent from my iPhone using Tapatalk
Post by: heckenjoni on Thu, 18 January 2018, 08:23:36
Post by: zoomwalt on Thu, 18 January 2018, 11:13:00
Hi, i am very interested in a grey or blue one (more into blue) and if possible a stock, someone here talked about "new blue ones", i messaged kin25 on telegram and he told me there is no a-stock Grey or blue, can someone explain this to me ? sorry i am new and maybe i overlooked something .. just Need to know if there will be tx1800 sold in blue or if i have to get another Color, rly want one of this boards ! :)
:( was hoping to snag a second grey
Post by: A.L. on Thu, 18 January 2018, 14:36:43
Hi, i am very interested in a grey or blue one (more into blue) and if possible a stock, someone here talked about "new blue ones", i messaged kin25 on telegram and he told me there is no a-stock Grey or blue, can someone explain this to me ? sorry i am new and maybe i overlooked something .. just Need to know if there will be tx1800 sold in blue or if i have to get another Color, rly want one of this boards !a stock means its new without any defects, b stock means new with defects ussually some blemish or scratch
Sent from my iPhone using Tapatalk
yeah not sure why you thaught i dont know what a-stock and b-stock is, i would just love to know how many blue tx1800 will be made, would love to get a blue one but if there are only 2 made or something like that i would ofc try to get another Color, would be super nice if kin25 or Popkorn62 can tell us, so i know if i have to try to get one the day they are on txkeyboard.com or if a few blue ones will follow, anyways very nice board ! :)
Post by: ctrlX on Thu, 18 January 2018, 14:52:42
Or will there be for international orders also coming up later?
Post by: MegalaDump on Thu, 18 January 2018, 14:58:41
Post by: gr4v3m4n on Thu, 18 January 2018, 15:52:10
well im sorry...i mean you ask and kin already talk about a-stock and b-stock and you should of known that these board are very limited.i messaged kin25 on telegram and he told me there is no a-stock Grey or blue, can someone explain this to me ?
yeah not sure why you thaught i dont know what a-stock and b-stock is, i would just love to know how many blue tx1800 will be made, would love to get a blue one but if there are only 2 made or something like that i would ofc try to get another Color, would be super nice if kin25 or Popkorn62 can tell us, so i know if i have to try to get one the day they are on txkeyboard.com or if a few blue ones will follow, anyways very nice board ! :)
Sent from my iPhone using Tapatalk
Post by: A.L. on Thu, 18 January 2018, 16:39:35
well im sorry...i mean you ask and kin already talk about a-stock and b-stock and you should of known that these board are very limited.i messaged kin25 on telegram and he told me there is no a-stock Grey or blue, can someone explain this to me ?
yeah not sure why you thaught i dont know what a-stock and b-stock is, i would just love to know how many blue tx1800 will be made, would love to get a blue one but if there are only 2 made or something like that i would ofc try to get another Color, would be super nice if kin25 or Popkorn62 can tell us, so i know if i have to try to get one the day they are on txkeyboard.com or if a few blue ones will follow, anyways very nice board ! :)
Sent from my iPhone using Tapatalk
well that is the reason why i ask, i guess blue is not so pupular like black for example so if popkorn62 or kin25 can tell me there are quiet a few blue ones that will be made i will not buy one of the others that will go on txkeyboards.com soon so someone that rly wants a black or whatever gets maybe that color, yeah sadly These boards are limited :/ (if not i guess i will try to get whatever color i can get and powder coat it blue)
Post by: heckenjoni on Thu, 18 January 2018, 17:12:30
well im sorry...i mean you ask and kin already talk about a-stock and b-stock and you should of known that these board are very limited.i messaged kin25 on telegram and he told me there is no a-stock Grey or blue, can someone explain this to me ?
yeah not sure why you thaught i dont know what a-stock and b-stock is, i would just love to know how many blue tx1800 will be made, would love to get a blue one but if there are only 2 made or something like that i would ofc try to get another Color, would be super nice if kin25 or Popkorn62 can tell us, so i know if i have to try to get one the day they are on txkeyboard.com or if a few blue ones will follow, anyways very nice board ! :)
Sent from my iPhone using Tapatalk
well that is the reason why i ask, i guess blue is not so pupular like black for example so if popkorn62 or kin25 can tell me there are quiet a few blue ones that will be made i will not buy one of the others that will go on txkeyboards.com soon so someone that rly wants a black or whatever gets maybe that color, yeah sadly These boards are limited :/ (if not i guess i will try to get whatever color i can get and powder coat it blue)
would also like to know if i have to try to snag whatever color i can get, or if there are a few extra blue ones that will be sold
Post by: roostrc0gburn on Thu, 18 January 2018, 17:33:31
Post by: zoomwalt on Thu, 18 January 2018, 17:34:19
y'all need to learn how to put a quote in your post
yes. this. tho i suppose i can't talk too much smack since I didn't know how to correctly post pictures
Post by: popkorn62 on Fri, 19 January 2018, 03:58:54
10 tkl
4 cp
5 1800
This is convenient if you just want to buy pcb for now. If you want tx1800 extras too then may as well wait.
If I run out and you don’t mind the shipping fee from Kin, then you can order in the International article.
Thank you for your patience, guys.
P/S: please do not combine US and international orders in your cart. I will cancel those right away.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: zoomwalt on Fri, 19 January 2018, 04:02:09
US Customers can now order PCBs I have in stock.
10 tkl
4 cp
5 1800
If I run out and you don’t mind the shipping fee from Kin, then you can order in the International article.
Thank you for your patience, guys.
P/S: please do not combine US and international orders in your cart. I will cancel those right away.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
pm'd
Post by: maxf on Fri, 19 January 2018, 11:55:42
Post by: popkorn62 on Fri, 19 January 2018, 12:52:04
1800 is the high Life. Trying to convince myself I don't need 2 hahaShow Image(https://uploads.tapatalk-cdn.com/20180119/daa7c933df448d39b4aa9bdfdec5bcbd.jpg)
Ah~ love this! I still think something GMK would be more appealing tho xD
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: maxf on Fri, 19 January 2018, 12:56:32
I'm actually going to be putting gmk 9009 on that soon1800 is the high Life. Trying to convince myself I don't need 2 hahaShow Image(https://uploads.tapatalk-cdn.com/20180119/daa7c933df448d39b4aa9bdfdec5bcbd.jpg)
Ah~ love this! I still think something GMK would be more appealing tho xD
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: popkorn62 on Fri, 19 January 2018, 13:26:24
I'm actually going to be putting gmk 9009 on that soon1800 is the high Life. Trying to convince myself I don't need 2 hahaShow Image(https://uploads.tapatalk-cdn.com/20180119/daa7c933df448d39b4aa9bdfdec5bcbd.jpg)
Ah~ love this! I still think something GMK would be more appealing tho xD
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
I think that’s the best choice! 9009 can go w anything!
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: heckenjoni on Sat, 20 January 2018, 10:37:22
Post by: unmuscular_michael on Sat, 20 January 2018, 14:34:40
is it possible to buy just 1 tx1800 plate + pcb ? and 1 metal gasket (silver) ?
I second this question. I'd like to pick up a one piece silver gasket, PCB, and WKL Acrylic plate only.
Post by: kin25 on Sun, 21 January 2018, 05:29:49
is it possible to buy just 1 tx1800 plate + pcb ? and 1 metal gasket (silver) ?
I second this question. I'd like to pick up a one piece silver gasket, PCB, and WKL Acrylic plate only.
is it possible to buy just 1 tx1800 plate + pcb ? and 1 metal gasket (silver) ?
Shipping will be expensive from Korea to US.
so one of you can receive two persons' parcel and send other parts to the other buyer.
Post by: unmuscular_michael on Sun, 21 January 2018, 14:37:56
Post by: MAR82 on Sun, 21 January 2018, 16:17:59
Most of t works fine, but the numpad side is giving me two key press (that key and the key below it) for some keys. I checked all my diodes and even had someone else check everything too.
I tried asking Leeku, but he never got back to me.
Thanks for any input you guys might have
Post by: pixelpusher on Sun, 21 January 2018, 19:44:47
I haven't started putting together my TX-1800 yet (still waiting for my stabs and a few other parts). But I wanted to ask you guys for some advise on another Leeku 1800 PCB I have.
Most of t works fine, but the numpad side is giving me two key press (that key and the key below it) for some keys. I checked all my diodes and even had someone else check everything too.
I tried asking Leeku, but he never got back to me.
Thanks for any input you guys might have
How are you holding it when you test? I wouldn’t normally chime in but i just had this behavior on a pcb and was really bummed. All of the left keys on the board would register their key plus the one above.
Turns out, I was touching a diode in the pcb with my non-testing hand. Felt dumb, but was happy nothing was actually wrong.
Post by: wholypantalones on Mon, 22 January 2018, 06:58:32
Post by: MAR82 on Mon, 22 January 2018, 07:03:22
I haven't started putting together my TX-1800 yet (still waiting for my stabs and a few other parts). But I wanted to ask you guys for some advise on another Leeku 1800 PCB I have.
Most of t works fine, but the numpad side is giving me two key press (that key and the key below it) for some keys. I checked all my diodes and even had someone else check everything too.
I tried asking Leeku, but he never got back to me.
Thanks for any input you guys might have
How are you holding it when you test? I wouldn’t normally chime in but i just had this behavior on a pcb and was really bummed. All of the left keys on the board would register their key plus the one above.
Turns out, I was touching a diode in the pcb with my non-testing hand. Felt dumb, but was happy nothing was actually wrong.
Thanks for the idea, but I had flat on my desk mat that is none conductive.
From what I can tell it a hardware issue on that side of the PCB, or something messed up with the firmware (I don't really think it's the firmware since even after trying to reprogram it I was still having the same issue)
Post by: 2Cas on Mon, 22 January 2018, 09:26:17
Post by: DreLLin on Mon, 22 January 2018, 11:22:05
Since we're troubleshooting pcbs; anyone have an idea as to why on a leeku pcb the switches or leds won't register but the rgb leds on the bottom light up and just spin in a circle? I'm assuming it's bricked. I was emailing kin about it but he just stopped replying.
yes, its "bricked". You'll need to use an ISP, connect it manually to the 6-pin header thats on the PCB, and flash the firmware that way.
Had a similar problem with mine and got it fixed with an ISP programmer.
[attach=1]
Sadly now the USB port looks to be broken and I have to plug the cable in a specific angle to get it working. Need to resolder the USB port but am too lazy for it at the moment.
Post by: duynguyenle on Mon, 22 January 2018, 11:35:04
Since we're troubleshooting pcbs; anyone have an idea as to why on a leeku pcb the switches or leds won't register but the rgb leds on the bottom light up and just spin in a circle? I'm assuming it's bricked. I was emailing kin about it but he just stopped replying.
yes, its "bricked". You'll need to use an ISP, connect it manually to the 6-pin header thats on the PCB, and flash the firmware that way.
Had a similar problem with mine and got it fixed with an ISP programmer.
(Attachment Link)
Sadly now the USB port looks to be broken and I have to plug the cable in a specific angle to get it working. Need to resolder the USB port but am too lazy for it at the moment.
I had the exact issue while trying to upgrade my PCB to the latest version (v171209), ended up also having to go buy an USB ASP and manually reflash the bootloader. Luckily Leeku provides the bootloader on the Jigon download site.
I have now rolled my Leeku PCB back to version 170419 and it seems to be working.
Post by: megaforce on Mon, 22 January 2018, 12:30:28
Since we're troubleshooting pcbs; anyone have an idea as to why on a leeku pcb the switches or leds won't register but the rgb leds on the bottom light up and just spin in a circle? I'm assuming it's bricked. I was emailing kin about it but he just stopped replying.
yes, its "bricked". You'll need to use an ISP, connect it manually to the 6-pin header thats on the PCB, and flash the firmware that way.
Had a similar problem with mine and got it fixed with an ISP programmer.
(Attachment Link)
Sadly now the USB port looks to be broken and I have to plug the cable in a specific angle to get it working. Need to resolder the USB port but am too lazy for it at the moment.
I had the exact issue while trying to upgrade my PCB to the latest version (v171209), ended up also having to go buy an USB ASP and manually reflash the bootloader. Luckily Leeku provides the bootloader on the Jigon download site.
I have now rolled my Leeku PCB back to version 170419 and it seems to be working.
Atmel Flip should be sufficient right? No need for Atmel Studio?
Post by: duynguyenle on Mon, 22 January 2018, 16:55:38
Since we're troubleshooting pcbs; anyone have an idea as to why on a leeku pcb the switches or leds won't register but the rgb leds on the bottom light up and just spin in a circle? I'm assuming it's bricked. I was emailing kin about it but he just stopped replying.
yes, its "bricked". You'll need to use an ISP, connect it manually to the 6-pin header thats on the PCB, and flash the firmware that way.
Had a similar problem with mine and got it fixed with an ISP programmer.
(Attachment Link)
Sadly now the USB port looks to be broken and I have to plug the cable in a specific angle to get it working. Need to resolder the USB port but am too lazy for it at the moment.
I had the exact issue while trying to upgrade my PCB to the latest version (v171209), ended up also having to go buy an USB ASP and manually reflash the bootloader. Luckily Leeku provides the bootloader on the Jigon download site.
I have now rolled my Leeku PCB back to version 170419 and it seems to be working.
Atmel Flip should be sufficient right? No need for Atmel Studio?
Eh... I used AVRDUDE to flash the bootloader. I'm not sure if Atmel Flip works because the MCU (Atmega32A) does not have native USB functionality. USB functionality is handed off to an Attiny85. As far as I know, Atmel Flip is only used to communicate with AVR chips that are actually USB-capable.
If you want to reprogram your borked Leeku PCB, you will need an ISP programmer. There are many many of them on the market. I just happened to pick the USBASP because there's quite a few online retailers who stock it and readily available for next day shipping in the UK. If you're in a pinch, I believe you can rewire an an arduino to do the job as well.
Post by: megaforce on Mon, 22 January 2018, 17:10:27
Since we're troubleshooting pcbs; anyone have an idea as to why on a leeku pcb the switches or leds won't register but the rgb leds on the bottom light up and just spin in a circle? I'm assuming it's bricked. I was emailing kin about it but he just stopped replying.
yes, its "bricked". You'll need to use an ISP, connect it manually to the 6-pin header thats on the PCB, and flash the firmware that way.
Had a similar problem with mine and got it fixed with an ISP programmer.
(Attachment Link)
Sadly now the USB port looks to be broken and I have to plug the cable in a specific angle to get it working. Need to resolder the USB port but am too lazy for it at the moment.
I had the exact issue while trying to upgrade my PCB to the latest version (v171209), ended up also having to go buy an USB ASP and manually reflash the bootloader. Luckily Leeku provides the bootloader on the Jigon download site.
I have now rolled my Leeku PCB back to version 170419 and it seems to be working.
Atmel Flip should be sufficient right? No need for Atmel Studio?
Eh... I used AVRDUDE to flash the bootloader. I'm not sure if Atmel Flip works because the MCU (Atmega32A) does not have native USB functionality. USB functionality is handed off to an Attiny85. As far as I know, Atmel Flip is only used to communicate with AVR chips that are actually USB-capable.
If you want to reprogram your borked Leeku PCB, you will need an ISP programmer. There are many many of them on the market. I just happened to pick the USBASP because there's quite a few online retailers who stock it and readily available for next day shipping in the UK. If you're in a pinch, I believe you can rewire an an arduino to do the job as well.
Thanks! Have one on the way.
As for AVRDUDE, did you use the "a32" MCU call? I don't see one specific to Atmega32A (only Atmega32)? http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Descriptions
Post by: wholypantalones on Mon, 22 January 2018, 18:05:27
Since we're troubleshooting pcbs; anyone have an idea as to why on a leeku pcb the switches or leds won't register but the rgb leds on the bottom light up and just spin in a circle? I'm assuming it's bricked. I was emailing kin about it but he just stopped replying.
yes, its "bricked". You'll need to use an ISP, connect it manually to the 6-pin header thats on the PCB, and flash the firmware that way.
Had a similar problem with mine and got it fixed with an ISP programmer.
(Attachment Link)
Sadly now the USB port looks to be broken and I have to plug the cable in a specific angle to get it working. Need to resolder the USB port but am too lazy for it at the moment.
Great, thanks to both of you for the replies!
Post by: duynguyenle on Mon, 22 January 2018, 18:13:12
Thanks! Have one on the way.
As for AVRDUDE, did you use the "a32" MCU call? I don't see one specific to Atmega32A (only Atmega32)? http://www.nongnu.org/avrdude/user-manual/avrdude_4.html#Option-Descriptions
It's 'm32' for Atmel Atmega32A and u32 for Atmega32U iirc
Use the pins on the PCB, they are all correctly annotated. Worth noting that if you've got a plate and switches already soldered on, the pins are the opposite way on a 6-pin ISP header, so you will have to do a bit of wiring gymnastics (or use individual leads like what the Drellin dude did). I was lazy, so I jury rigged up a somewhat dodgy looking contraption but it worked out just fine
(https://i.imgur.com/VGLgCM0.jpg)
If you have access to the topside of the PCB, the 6-pin ISP header just drops straight in
Post by: megaforce on Mon, 22 January 2018, 18:42:22
Hopefully some jumper breadboard wires will fit!
Post by: popkorn62 on Tue, 23 January 2018, 12:53:35
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: ihalatch on Tue, 23 January 2018, 19:47:16
Post by: popkorn62 on Wed, 24 January 2018, 00:08:16
I can't save my address and hence can't proceed to checkout??? It's impossible to order anything from this website. Very frustrating experience!
I have replied to all of your tickets and still could not find out what is wrong. I have tested with multiple accounts as well. Please keep our conversation off this thread.
P/S: I apologize for the buggy website. I definitely am not one of the decent coders lol. I tried to make it work in all scenarios but the complication came from different shipping + payment methods for different countries/products. Anyway, if anyone else has any problems with the website, please let me know thru PM or tickets. Thank you.
Post by: popkorn62 on Wed, 24 January 2018, 17:00:07
Post by: roostrc0gburn on Wed, 24 January 2018, 18:06:09
Using some pics on this thread for the store's banners. Please let me know if you want me to take your pics down :(.
just credit my picture if you're going to use it
Post by: heckenjoni on Fri, 26 January 2018, 11:51:52
Post by: ihalatch on Fri, 26 January 2018, 19:06:11
what bottom row options do i have on the tx1800v2 ?
1.5 | 1.5 | 7 |1.5 | 1.5 |
1.25 | 1.25 | 1.25 | 6.25 | 1.5 | 1.5 |
Post by: duynguyenle on Sat, 27 January 2018, 06:50:41
Also you can substitute a 6.25u spacebar for split spacebar of 2.25, 2.75 and 1.25u arrangements
Post by: KetchyKech on Sat, 27 January 2018, 14:41:44
You can now order just plates + pcbs from kin.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
i need a tx75% pcb, where can i has dis! :thumb:
Post by: Uleoja on Sat, 27 January 2018, 18:40:37
Anybody have instructions on how to change the RGB effects?
Post by: Puddsy on Sat, 27 January 2018, 18:43:08
I just got mine built. Very fun build!
Anybody have instructions on how to change the RGB effects?
https://geekhack.org/index.php?topic=83950.0
Post by: popkorn62 on Sun, 28 January 2018, 14:02:20
You can now order just plates + pcbs from kin.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
i need a tx75% pcb, where can i has dis! :thumb:
Hi there,
Please contact Leeku. As far as I know, Kin doesn’t have it :).
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: DillonHightower on Sun, 28 January 2018, 22:59:18
Those of you who have built this. Do you break off tabs at top and bottom of PCB??
I am getting ready to put plate on and switches and need this info asap
Post by: Puddsy on Sun, 28 January 2018, 23:01:18
Question!
Those of you who have built this. Do you break off tabs at top and bottom of PCB??
I am getting ready to put plate on and switches and need this info asap
yeah you gotta break those bits off
send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking of
Post by: DillonHightower on Sun, 28 January 2018, 23:09:56
Question!
Those of you who have built this. Do you break off tabs at top and bottom of PCB??
I am getting ready to put plate on and switches and need this info asap
yeah you gotta break those bits off
send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking of
pmed
Post by: DillonHightower on Sun, 28 January 2018, 23:14:53
Question!
Those of you who have built this. Do you break off tabs at top and bottom of PCB??
I am getting ready to put plate on and switches and need this info asap
yeah you gotta break those bits off
Post by: Puddsy on Sun, 28 January 2018, 23:20:03
Question!
Those of you who have built this. Do you break off tabs at top and bottom of PCB??
I am getting ready to put plate on and switches and need this info asap
yeah you gotta break those bits off
send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking ofShow Image(https://i.imgur.com/lhP7Ad7.jpg)
ya break em off
Post by: DillonHightower on Sun, 28 January 2018, 23:21:59
Question!
Those of you who have built this. Do you break off tabs at top and bottom of PCB??
I am getting ready to put plate on and switches and need this info asap
yeah you gotta break those bits off
send a pic so i can confirm but i think the 1800 pcbs come with the things i'm thinking ofShow Image(https://i.imgur.com/lhP7Ad7.jpg)
ya break em off
any advice to do this the safest way? I have never had to do such things.
Post by: DillonHightower on Sun, 28 January 2018, 23:28:12
Post by: Uleoja on Mon, 29 January 2018, 10:37:53
I just got mine built. Very fun build!
Anybody have instructions on how to change the RGB effects?
https://geekhack.org/index.php?topic=83950.0
Perfect! I got the firmware updated and that that seemed to fix the problem. Thank you very much!
Post by: Puddsy on Mon, 29 January 2018, 11:44:55
I just got mine built. Very fun build!
Anybody have instructions on how to change the RGB effects?
https://geekhack.org/index.php?topic=83950.0
Perfect! I got the firmware updated and that that seemed to fix the problem. Thank you very much!
:thumbsup:
Post by: popkorn62 on Tue, 30 January 2018, 16:48:59
As of this point, I just need to wait for Kin to count the TX1800 v2 extras he has then we can start the sale.
Post by: PleaseBeMyFriend on Wed, 31 January 2018, 01:23:30
Post by: popkorn62 on Wed, 31 January 2018, 01:41:53
Regarding the extras, are those to ship out asap once we order?
Yes.
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: PleaseBeMyFriend on Wed, 31 January 2018, 01:43:27
Post by: popkorn62 on Wed, 31 January 2018, 02:05:08
Sorry if this was in the thread somewhere, what's the pricing going to look like?
Hi, please visit the website on my signature.
Shipping will be around 30-40 to Asia, $50-$60 to EU, $70-80 to America
Post by: stoic-lemon on Wed, 31 January 2018, 04:59:33
Post by: duynguyenle on Wed, 31 January 2018, 07:08:50
Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?
I have been having no ends of trouble with my PCB. Seems to be corrupting itself every so often which usually requires reflashing the bootloader using an ISP programmer. Getting sick of dealing with these problems. I really want the QMK replacement PCB to arrive so I can rebuild my board. Currently my TX1800v2 is sitting in the corner unused because the PCB borks itself every couple of day and I am getting tired of having to open up the case repeatedly to reflash
Post by: wholypantalones on Wed, 31 January 2018, 07:42:22
Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?
I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.
Post by: duynguyenle on Wed, 31 January 2018, 08:07:45
Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?
I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.
Except that's not the latest version of the firmware
The latest is v171209. Jigon mapping software is still at v170419
Also worth it to note that I have both MX and Alps version of the Leeku A.87 PCBs and have no trouble running v170419. Whatever problem I've been having appears to originate from v171209
Post by: stoic-lemon on Wed, 31 January 2018, 08:08:16
I have been having no ends of trouble with my PCB. Seems to be corrupting itself every so often which usually requires reflashing the bootloader using an ISP programmer. Getting sick of dealing with these problems. I really want the QMK replacement PCB to arrive so I can rebuild my board. Currently my TX1800v2 is sitting in the corner unused because the PCB borks itself every couple of day and I am getting tired of having to open up the case repeatedly to reflashWhat PCB are you getting as a replacement?
I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.The L3 firmware now shows 171209. Are you using that one with 170419?
Post by: duynguyenle on Wed, 31 January 2018, 08:12:08
I have been having no ends of trouble with my PCB. Seems to be corrupting itself every so often which usually requires reflashing the bootloader using an ISP programmer. Getting sick of dealing with these problems. I really want the QMK replacement PCB to arrive so I can rebuild my board. Currently my TX1800v2 is sitting in the corner unused because the PCB borks itself every couple of day and I am getting tired of having to open up the case repeatedly to reflashWhat PCB are you getting as a replacement?
I've got a Hineybush 1800 prototype coming in the mail, and plan to buy a couple QMK PCBs from TKC when that gets released
Post by: stoic-lemon on Wed, 31 January 2018, 08:13:49
Post by: duynguyenle on Wed, 31 January 2018, 08:18:57
Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.
TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB
Post by: DillonHightower on Wed, 31 January 2018, 09:15:02
Post by: roostrc0gburn on Wed, 31 January 2018, 10:26:28
My rgb leds on the bottom just stopped working all together after 2 days of use. # 1 and 2 work 3-20 do not. Not sure what the issue is. I’ve tried to reflash and differnt USB ports with no luck. Wondering if something died or if it is a firmware issue
o ****. another leeku pcb bites the dust...
Post by: wholypantalones on Wed, 31 January 2018, 11:36:52
Are people having problems updating their boards now that the firmware and Jigon versions are different. I'd always thought they had to match, and in fact had errors when I tried to flash a firmware and jigon that didn't have matching numbers?
I have four boards (2x 87, 2x CP) all using the latest version 170419 of firmware and Jigon. No issues except I bricked an extra 87 pcb playing with the rgb lights. Just have to re-flash it.
Except that's not the latest version of the firmware
The latest is v171209. Jigon mapping software is still at v170419
Also worth it to note that I have both MX and Alps version of the Leeku A.87 PCBs and have no trouble running v170419. Whatever problem I've been having appears to originate from v171209
My bad, I should read more before replying. Carry on.
Post by: Uleoja on Wed, 31 January 2018, 15:50:42
Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.
TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB
Do all those PCB's fit in the TX1800v2?
Post by: Puddsy on Wed, 31 January 2018, 16:07:19
Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.
TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB
Do all those PCB's fit in the TX1800v2?
i think so, since both are meant to fit an original 1800 case
Post by: Petch on Wed, 31 January 2018, 18:20:06
Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.
TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB
Indicator LEDs are not going to match up I don't think, looking at that QMK one
Do all those PCB's fit in the TX1800v2?
i think so, since both are meant to fit an original 1800 case
Post by: duynguyenle on Wed, 31 January 2018, 18:53:49
Ah right. I have my prototype, but I want to put that in a traditional 1800 case and maybe get a fancy one with LEDs fitted for the TX1800.
TKC1800. Supposedly they will have bare PCBs to sell alongside the case GB
Indicator LEDs are not going to match up I don't think, looking at that QMK one
Do all those PCB's fit in the TX1800v2?
i think so, since both are meant to fit an original 1800 case
Of course indicator LEDs are gonna match up, the TX1800 case has the holes in the same position as an OG 1800 case. In fact, the Leeku 1800 PCB works in both the TX1800 case an an OG case.
Source: Have had an Leeku PCB built inside OG G80-1800 case for years
Post by: Petch on Thu, 01 February 2018, 04:48:23
Post by: TerryMathews on Thu, 01 February 2018, 04:53:26
My bad, was thinking of Dolch 1800
The TKC PCB can be used there as well, you just have to retain and wire up the Dolch indicator PCB.
Post by: Jhors2 on Sun, 04 February 2018, 10:52:43
Post by: Puddsy on Sun, 04 February 2018, 14:30:19
Are extra bags going to be listed on the site by chance? Any ETA on when if so?
doubtful, kin seems to like to bundle them with boards and then sell extras that way
Post by: senortighto on Mon, 05 February 2018, 09:13:46
My rgb leds on the bottom just stopped working all together after 2 days of use. # 1 and 2 work 3-20 do not. Not sure what the issue is. I’ve tried to reflash and differnt USB ports with no luck. Wondering if something died or if it is a firmware issue
o ****. another leeku pcb bites the dust...
I also have a number of LEDs that don't work on mine, the only ones that do sorta work/light up are the one next to the ESC key, the one next to the Caps Lock key, and the ones by F5 and F8. Of those four, only the one next to Caps Lock will operate normally with how it is set in the JigOn app. The rest sorta flash in and out in a more or less random fashion. I was personally less impressed by the quality of the PCB, but the case is 100% awesome and if you have the means, I highly suggest you pick one up.
I'll probably get a different 1800 PCB in the future if the LED situation bugs me enough, but for now, from a functional perspective on typing alone, it works great and I have been very happy with it.
Post by: Puddsy on Mon, 05 February 2018, 20:00:38
My rgb leds on the bottom just stopped working all together after 2 days of use. # 1 and 2 work 3-20 do not. Not sure what the issue is. I’ve tried to reflash and differnt USB ports with no luck. Wondering if something died or if it is a firmware issue
o ****. another leeku pcb bites the dust...
I also have a number of LEDs that don't work on mine, the only ones that do sorta work/light up are the one next to the ESC key, the one next to the Caps Lock key, and the ones by F5 and F8. Of those four, only the one next to Caps Lock will operate normally with how it is set in the JigOn app. The rest sorta flash in and out in a more or less random fashion. I was personally less impressed by the quality of the PCB, but the case is 100% awesome and if you have the means, I highly suggest you pick one up.
I'll probably get a different 1800 PCB in the future if the LED situation bugs me enough, but for now, from a functional perspective on typing alone, it works great and I have been very happy with it.
are you using the right version of the firmware? that sounds like it might be firmware issue rather than a CB one
Post by: popkorn62 on Tue, 06 February 2018, 13:59:40
I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.
Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.
Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.
Post by: shadowrealmwarez on Tue, 06 February 2018, 14:01:14
In case you missed it, you can now order plate/pcb/metal gaskets (very very limited) for TX1800 v2 directly from kin on the website.
I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.
Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.
Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.
Will any more TX 1800v2's be posted for sale by chance?
Post by: popkorn62 on Tue, 06 February 2018, 14:06:57
In case you missed it, you can now order plate/pcb/metal gaskets (very very limited) for TX1800 v2 directly from kin on the website.
I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.
Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.
Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.
Will any more TX 1800v2's be posted for sale by chance?
To be honest, when will that happen is entirely up to Kin. He seems to be busy w other stuff *cough*tx60/65*cough* recently and LNY is coming up as well. However, 100% there will be an extra sale. He will not just leave them there collecting dust forever.
Post by: shadowrealmwarez on Tue, 06 February 2018, 14:09:13
In case you missed it, you can now order plate/pcb/metal gaskets (very very limited) for TX1800 v2 directly from kin on the website.
I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.
Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.
Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.
Will any more TX 1800v2's be posted for sale by chance?
To be honest, when will that happen is entirely up to Kin. He seems to be busy w other stuff *cough*tx60/65*cough* recently and LNY is coming up as well. However, 100% there will be an extra sale. He will not just leave them there collecting dust forever.
I look forward to seeing an email or GH post :) thanks for all your hardware you and Kin do.
Post by: popkorn62 on Tue, 06 February 2018, 14:12:44
In case you missed it, you can now order plate/pcb/metal gaskets (very very limited) for TX1800 v2 directly from kin on the website.
I have also posted a new shipping option Air Parcel for small/light items. It is cheaper but much slower. It took around 6 business days to go from Korea to Vietnam last time I checked.
Regarding bags, kin said he would try to send me a bunch to stock up for customers and he will sell them separately as well but please beware that the shipping cost is pretty ridiculous.
Last but not least, Lunar New Year is coming up so expect delays in both handling time and shipping time for international orders. For US orders, I will still ship within 1-3 business days.
Will any more TX 1800v2's be posted for sale by chance?
To be honest, when will that happen is entirely up to Kin. He seems to be busy w other stuff *cough*tx60/65*cough* recently and LNY is coming up as well. However, 100% there will be an extra sale. He will not just leave them there collecting dust forever.
I look forward to seeing an email or GH post :) thanks for all your hardware you and Kin do.
You are very welcome. However, it really is just Kin :). Also, don't worry there will be an email coming out to alert buyers :).
Post by: popkorn62 on Thu, 08 February 2018, 14:35:53
Since a buyer unfortunately made a purchase of the 1800 plate on our website expecting it to fit into the G80 case, I want to make it clear that the TX1800 plate WILL NOT FIT into the G80 case. However, we DO SELL the plates that fit. It is exactly the same price as the TX1800 plate, you just need to specify it in the comment box at check out when you order the 1800 plate of your choice.
Post by: wodan on Fri, 09 February 2018, 06:33:10
Post by: popkorn62 on Sat, 10 February 2018, 03:36:39
Me building a TX1800v2 for your viewing pleasure!
I wish I could type on nixies once. On a brass plate of TX1800 v2 no less :’(
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: DillonHightower on Thu, 15 February 2018, 21:01:05
(https://i.imgur.com/jAOjbI1.jpg)
(https://i.imgur.com/1KnyKHP.jpg)
(https://i.imgur.com/Q4Gs0A8.jpg?1)
Post by: popkorn62 on Fri, 16 February 2018, 12:25:10
Finished up with mine , Could not be happier (other than rgb led having issues on bottom of board)Show Image(https://i.imgur.com/jAOjbI1.jpg)Show Image(https://i.imgur.com/1KnyKHP.jpg)Show Image(https://i.imgur.com/Q4Gs0A8.jpg?1)
I love it! Also is that JTK Toxic or the original one??
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
Post by: iamtootallforthis on Fri, 16 February 2018, 12:39:26
Finished up with mine , Could not be happier (other than rgb led having issues on bottom of board)Show Image(https://i.imgur.com/jAOjbI1.jpg)Show Image(https://i.imgur.com/1KnyKHP.jpg)Show Image(https://i.imgur.com/Q4Gs0A8.jpg?1)
I love it! Also is that JTK Toxic or the original one??
======••••======
http://txkeyboards.com/
Please click LOG IN to register. Bottom page is for newsletter only.
Please do not PM me about your order. Submit a ticket with your invoice number. Thank you.
JTK
Post by: unmuscular_michael on Wed, 21 February 2018, 21:48:59
1. What are the dimensions of the screws that connect the two halves? I want to order some black oxide ones and my screw/nut measurement tool doesn't have sizes this small. Looking for M3/M4 with TPI and the length if possible.
2. Has anyone figured out a way to trigger shortcuts like Win+E, Win+R without having a Win key, aside from recording macros? I went with a WKL layout for the appearance, but I discovered that these shortcuts don't seem to work like I'd expect. I have Fn+Ctrl as the Windows key, but pressing Fn+Ctrl+E does not equate to Win+E, it just opens the start menu as if the E was never pressed. This isn't too big a deal since I mapped macros (Fn+E, for instance) for the shortcuts I use. Would like to see if anyone has solved this though.
Post by: pixelpusher on Thu, 22 February 2018, 07:41:00
Ok, so a few questions if anyone has answers.
1. What are the dimensions of the screws that connect the two halves? I want to order some black oxide ones and my screw/nut measurement tool doesn't have sizes this small. Looking for M3/M4 with TPI and the length if possible.
2. Has anyone figured out a way to trigger shortcuts like Win+E, Win+R without having a Win key, aside from recording macros? I went with a WKL layout for the appearance, but I discovered that these shortcuts don't seem to work like I'd expect. I have Fn+Ctrl as the Windows key, but pressing Fn+Ctrl+E does not equate to Win+E, it just opens the start menu as if the E was never pressed. This isn't too big a deal since I mapped macros (Fn+E, for instance) for the shortcuts I use. Would like to see if anyone has solved this though.
I use right alt as a Windows key on my wkl boards. Can’t do one handed win+E but I needed it for win+arrow for window management. Couldn’t give that one up
Post by: duynguyenle on Thu, 22 February 2018, 09:59:55
Ok, so a few questions if anyone has answers.
1. What are the dimensions of the screws that connect the two halves? I want to order some black oxide ones and my screw/nut measurement tool doesn't have sizes this small. Looking for M3/M4 with TPI and the length if possible.
2. Has anyone figured out a way to trigger shortcuts like Win+E, Win+R without having a Win key, aside from recording macros? I went with a WKL layout for the appearance, but I discovered that these shortcuts don't seem to work like I'd expect. I have Fn+Ctrl as the Windows key, but pressing Fn+Ctrl+E does not equate to Win+E, it just opens the start menu as if the E was never pressed. This isn't too big a deal since I mapped macros (Fn+E, for instance) for the shortcuts I use. Would like to see if anyone has solved this though.
I routinely use WKL layouts and usually have Winkey mapped to capslock
Post by: Puddsy on Thu, 22 February 2018, 11:13:21
Ok, so a few questions if anyone has answers.
1. What are the dimensions of the screws that connect the two halves? I want to order some black oxide ones and my screw/nut measurement tool doesn't have sizes this small. Looking for M3/M4 with TPI and the length if possible.
my bet is M3
Quote
2. Has anyone figured out a way to trigger shortcuts like Win+E, Win+R without having a Win key, aside from recording macros? I went with a WKL layout for the appearance, but I discovered that these shortcuts don't seem to work like I'd expect. I have Fn+Ctrl as the Windows key, but pressing Fn+Ctrl+E does not equate to Win+E, it just opens the start menu as if the E was never pressed. This isn't too big a deal since I mapped macros (Fn+E, for instance) for the shortcuts I use. Would like to see if anyone has solved this though.
just map winkey somewhere else (i map mine to right alt or pause)
Post by: unmuscular_michael on Thu, 22 February 2018, 11:16:21
I use right alt as a Windows key on my wkl boards. Can’t do one handed win+E but I needed it for win+arrow for window management. Couldn’t give that one up
I was using this for a while but I didn't like it there either. I actually do use the right alt key. Right now I have Fn on CapsLock and have put Macros on those keys to retain the functionality.
I routinely use WKL layouts and usually have Winkey mapped to capslock
I was going to do this, but I fat-finger that key a LOT while gaming. I have Fn there now.
Post by: unmuscular_michael on Thu, 22 February 2018, 11:19:37
just map winkey somewhere else (i map mine to right alt or pause)
I have a solution that works now, but would prefer to not have to use macros for it. I'd like to get it working the right way without using another key like that.
Post by: Puddsy on Thu, 22 February 2018, 15:16:11
just map winkey somewhere else (i map mine to right alt or pause)
I have a solution that works now, but would prefer to not have to use macros for it. I'd like to get it working the right way without using another key like that.
you can do it in the keymapping software, jigon, it's pretty easy, i can make you a video if you'd like
Post by: unmuscular_michael on Thu, 22 February 2018, 17:50:22
you can do it in the keymapping software, jigon, it's pretty easy, i can make you a video if you'd like
I have used Jigon, but using Fn+Ctrl as LGui and then pressing E or R or any other combo doesn't work the right way for me. I'd be interested to see how you got it working.
Post by: Puddsy on Thu, 22 February 2018, 22:02:55
you can do it in the keymapping software, jigon, it's pretty easy, i can make you a video if you'd like
I have used Jigon, but using Fn+Ctrl as LGui and then pressing E or R or any other combo doesn't work the right way for me. I'd be interested to see how you got it working.
it's kinda weird, you have to do it backwards
so for win+l, you have to hit L, then FN, then winkey
that's how i got it working for bootmapper, i might fiddle with jigon later to see if it's the same
Post by: packman86 on Thu, 22 February 2018, 23:03:58
Post by: unmuscular_michael on Fri, 23 February 2018, 11:06:33
it's kinda weird, you have to do it backwards
so for win+l, you have to hit L, then FN, then winkey
that's how i got it working for bootmapper, i might fiddle with jigon later to see if it's the same
Didn't work for me with Jigon. I actually can't recall what exactly I did with Bootmapper client on one of my previous builds, but I don't think I had this issue with it. Thanks for the tip, in any case.
Post by: Puddsy on Fri, 23 February 2018, 13:25:43
it's kinda weird, you have to do it backwards
so for win+l, you have to hit L, then FN, then winkey
that's how i got it working for bootmapper, i might fiddle with jigon later to see if it's the same
Didn't work for me with Jigon. I actually can't recall what exactly I did with Bootmapper client on one of my previous builds, but I don't think I had this issue with it. Thanks for the tip, in any case.
i think i have some spare time to **** around with it this weekend, i'll let you know
Post by: unmuscular_michael on Fri, 23 February 2018, 14:04:14
i think i have some spare time to **** around with it this weekend, i'll let you know
It's no big deal, but if you did find a way I'd be interested. FYI, you were right about them being M3 screws and I found some replacements. Thanks for your help.
Post by: Puddsy on Fri, 23 February 2018, 14:44:56
i think i have some spare time to **** around with it this weekend, i'll let you know
It's no big deal, but if you did find a way I'd be interested. FYI, you were right about them being M3 screws and I found some replacements. Thanks for your help.
no worries
Post by: Uleoja on Sun, 25 February 2018, 14:05:37
If you could be so kind would you be able to supply us with a parts list for the all the different screws used the in the TX1800? I am looking for length, width and thread type. I would like to order some (gold) as replacements/spare.
Thanks!
Post by: unmuscular_michael on Mon, 26 February 2018, 23:50:09
Kin,
If you could be so kind would you be able to supply us with a parts list for the all the different screws used the in the TX1800? I am looking for length, width and thread type. I would like to order some (gold) as replacements/spare.
Thanks!
I just did the same, so I can help a bit. The 10 screws that hold the bottom on are M3 x 0.5mm thread, 10mm long. The 6 screws that hold the plate on are M3 x 0.5mm, 6mm long. I ordered McMaster-Carr part numbers 91294A130 and 91294A126 (Both Black Oxide alloy steel). McMaster also lists a "Fine Thread" version, but you don't want those.
I don't know what the ones that hold the plate on are, unfortunately. Judging by your request I'd think you're not worried about the aesthetics of internal screws though.
Post by: Uleoja on Tue, 27 February 2018, 07:47:49
Kin,
If you could be so kind would you be able to supply us with a parts list for the all the different screws used the in the TX1800? I am looking for length, width and thread type. I would like to order some (gold) as replacements/spare.
Thanks!
I just did the same, so I can help a bit. The 10 screws that hold the bottom on are M3 x 0.5mm thread, 10mm long. The 6 screws that hold the plate on are M3 x 0.5mm, 6mm long. I ordered McMaster-Carr part numbers 91294A130 and 91294A126 (Both Black Oxide alloy steel). McMaster also lists a "Fine Thread" version, but you don't want those.
I don't know what the ones that hold the plate on are, unfortunately. Judging by your request I'd think you're not worried about the aesthetics of internal screws though.
Thank you sir! If I find the plate screws I'll pm you. Did you get the screws yet? How's the quality from McMaster? Are they magnetic? Thank you very much again.
Post by: unmuscular_michael on Tue, 27 February 2018, 11:30:42
Thank you sir! If I find the plate screws I'll pm you. Did you get the screws yet? How's the quality from McMaster? Are they magnetic? Thank you very much again.
I got them yesterday actually. I haven't had an issue with McMaster at all, but these are small-ish screws and I have heavy hands, so I got the black oxide for the higher tensile strength, though I don't suspect it'd be an issue really. These ones are magnetic, but it depends on material of course.
Post by: DillonHightower on Sat, 03 March 2018, 14:24:00
Post by: TerryMathews on Sat, 03 March 2018, 14:26:02
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Ws2812B
Post by: DillonHightower on Sat, 03 March 2018, 14:40:18
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Ws2812B
So it’s pretty much a basic 5050 huh?
Post by: smittysteve on Sat, 03 March 2018, 14:42:57
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Ws2812B
So it’s pretty much a basic 5050 huh?
I ordered these.
http://www.tinyosshop.com/index.php?route=product/product&product_id=915
Post by: DillonHightower on Sat, 03 March 2018, 15:17:30
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Ws2812B
So it’s pretty much a basic 5050 huh?
I ordered these.
http://www.tinyosshop.com/index.php?route=product/product&product_id=915
Did you have issues with some going out ? And did putting new ones on work out ? I’m wondering if resistors are having issues as well
Post by: smittysteve on Sat, 03 March 2018, 15:23:09
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Ws2812B
So it’s pretty much a basic 5050 huh?
I ordered these.
http://www.tinyosshop.com/index.php?route=product/product&product_id=915
Did you have issues with some going out ? And did putting new ones on work out ? I’m wondering if resistors are having issues as well
Very much yes- many LED issues on Duck PCBs. Haven’t had trouble with Leeku PCBs in my TX boards... but those lights are pretty fragile. Unlikely a resistor, I’d say... they are usually robust, but of course anything is possible.
What’s happened in yours? In my Duck boards, one would fail and then all downstream from that were out. Feel free to PM me as well if you’d like. :)
Post by: DillonHightower on Sat, 03 March 2018, 15:43:41
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Ws2812B
So it’s pretty much a basic 5050 huh?
I ordered these.
http://www.tinyosshop.com/index.php?route=product/product&product_id=915
Did you have issues with some going out ? And did putting new ones on work out ? I’m wondering if resistors are having issues as well
Very much yes- many LED issues on Duck PCBs. Haven’t had trouble with Leeku PCBs in my TX boards... but those lights are pretty fragile. Unlikely a resistor, I’d say... they are usually robust, but of course anything is possible.
What’s happened in yours? In my Duck boards, one would fail and then all downstream from that were out. Feel free to PM me as well if you’d like. :)
you are awesome man, pm
Post by: DillonHightower on Sat, 03 March 2018, 16:59:45
Anyone have any idea what rgb smd are being used on this PCB? I am going to try and replace a few before I give in and just get a new PCB. But nit sure which ones I should be looking at.
Ws2812B
So it’s pretty much a basic 5050 huh?
I ordered these.
http://www.tinyosshop.com/index.php?route=product/product&product_id=915
Did you have issues with some going out ? And did putting new ones on work out ? I’m wondering if resistors are having issues as well
Very much yes- many LED issues on Duck PCBs. Haven’t had trouble with Leeku PCBs in my TX boards... but those lights are pretty fragile. Unlikely a resistor, I’d say... they are usually robust, but of course anything is possible.
What’s happened in yours? In my Duck boards, one would fail and then all downstream from that were out. Feel free to PM me as well if you’d like. :)
I messaged you . What is throwing me off about the ones you linked , is that they have 3 solder points, where the ones on my pcb only have 2 solder points on each side . Is that going to make a difference ?
Post by: DillonHightower on Sat, 03 March 2018, 17:01:33
https://www.adafruit.com/product/1655
Post by: unmuscular_michael on Sun, 04 March 2018, 10:30:10
They look like thees
https://www.adafruit.com/product/1655
Those are correct. I had one out on my board and replaced it with this. The datasheet refers to it as an SK6812.
Post by: TerryMathews on Sun, 04 March 2018, 18:07:13
2) The 5050 nee WS2812B has 4 solder points. 2 would be a single-color dumb LED and 3 would be a bi-color dumb LED. You need 4 minimum, for either a dumb or smart RGB LED.
3) These have so many issues because they are damaged by the temps that boards are commonly wave soldered at. I've never had one die that was on a strip, or one that I hand soldered from new.
I'm not trying to point fingers, and I'm not going to name names, but there are a few people here who are infamous for RGB LED issues. In my humble opinion, they bake their boards too hot.
Post by: dead_pixel_design on Sun, 04 March 2018, 19:13:19
they bake their boards too hot.
Do you just mean too much heat when soldering switches? Would that cause LED issues/other issues?
I have never had any issues with a board (knock on wood), and for the most part think I practice pretty decent soldering technique, but I am always concerned that I am going to put too much heat into a PCB while I am soldering and damage something.
Post by: TerryMathews on Sun, 04 March 2018, 19:36:38
they bake their boards too hot.
Do you just mean too much heat when soldering switches? Would that cause LED issues/other issues?
I have never had any issues with a board (knock on wood), and for the most part think I practice pretty decent soldering technique, but I am always concerned that I am going to put too much heat into a PCB while I am soldering and damage something.
No, wave soldering is what they do in an assembly house when they do the whole board at once, especially SMD components. They place the components with solder paste then bake the board to melt the solder and form the joint.
WS2812Bs need a lower temp than most other components. You're unlikely to damage them hand soldering if you're using a good temp controlled iron.
Post by: dead_pixel_design on Sun, 04 March 2018, 19:40:12
No, wave soldering is what they do in an assembly house when they do the whole board at once, especially SMD components. They place the components with solder paste then bake the board to melt the solder and form the joint.
WS2812Bs need a lower temp than most other components. You're unlikely to damage them hand soldering if you're using a good temp controlled iron.
Ah, that makes sense, thanks!
Post by: Miotch92 on Sun, 04 March 2018, 23:06:55
Sent from my SM-G935T using Tapatalk
Post by: Artist on Mon, 05 March 2018, 23:56:45
Any idea when the extra b stocks go up on the site? Really looking to get one.
Sent from my SM-G935T using Tapatalk
I'm having the same question. I'd really like to get a hand on one :) !!
Post by: unmuscular_michael on Tue, 06 March 2018, 01:30:32
I'm not trying to point fingers, and I'm not going to name names, but there are a few people here who are infamous for RGB LED issues. In my humble opinion, they bake their boards too hot.
So I don't know if the LED on my board was bad before I put it in the case TBH. I wasn't running the acrylic gasket until recently and realized that I had one LED in the corner that wasn't shining blue - could have been a bad one before they even received it at assembly, and could have been bad after the assembly, or it could have shorted in my case. They're cheap enough that I don't really mind one being bad, and one good thing is that I now have 9 more spares.
Post by: DillonHightower on Tue, 06 March 2018, 04:34:14
I'm not trying to point fingers, and I'm not going to name names, but there are a few people here who are infamous for RGB LED issues. In my humble opinion, they bake their boards too hot.
So I don't know if the LED on my board was bad before I put it in the case TBH. I wasn't running the acrylic gasket until recently and realized that I had one LED in the corner that wasn't shining blue - could have been a bad one before they even received it at assembly, and could have been bad after the assembly, or it could have shorted in my case. They're cheap enough that I don't really mind one being bad, and one good thing is that I now have 9 more spares.
Acrylic diffuser is actually thinner than the metal and switches can Easley bottom out if pressed hard enough causing a shortage and LED to burn out. I recommend clipping all extra legs to flush
Post by: packman86 on Tue, 06 March 2018, 13:07:13
Any idea when the extra b stocks go up on the site? Really looking to get one.
Sent from my SM-G935T using Tapatalk
I'm having the same question. I'd really like to get a hand on one :) !!
Send Kin a Telegram message. He is usually very quick to respond.
Post by: unmuscular_michael on Wed, 07 March 2018, 17:10:49
Acrylic diffuser is actually thinner than the metal and switches can Easley bottom out if pressed hard enough causing a shortage and LED to burn out. I recommend clipping all extra legs to flush
I have a dynamat clone in the bottom of mine covered in Kapton, but there was a small portion that was not covered. I don't think it'd be possible to short the downward-facing 5050 LED in this case though.
Post by: Uleoja on Fri, 09 March 2018, 16:15:12
GMK 9009
Lubed Zeal Screw Stabs
Zealio 78g
Post by: popkorn62 on Wed, 14 March 2018, 14:30:24
A few shots from my Silver 1800 r2 build. Does anybody know how many silvers had been produced in r2? Any questions please let me know.
GMK 9009
Lubed Zeal Screw Stabs
Zealio 78g
I don't know how many got produced but I only saw the total of 4 orders for silver on both rounds + only 1 extra B-stock ;D
People mostly ordered Black/Titan Grey.
Post by: roostrc0gburn on Wed, 14 March 2018, 14:40:47
here's mine. the finish is a pristine, satin-like finish. built it with kailh box switches; black linear alphas, burnt orange tactile mods, and navy clicky lock and esc keys
Post by: popkorn62 on Wed, 14 March 2018, 14:52:42
Show Image(https://i.imgur.com/ymWbXDS.jpg)
here's mine. the finish is a pristine, satin-like finish. built it with kailh box switches; black linear alphas, burnt orange tactile mods, and navy clicky lock and esc keys
I love it! SA seems to add too much "weight" on the board and makes it look too fat. I think GMK is just perfect for TX1800 :thumb:
I wish I ordered a Silver too
Post by: naasfu on Sun, 01 April 2018, 00:36:42
it's an awesome looking board for sure. my first 1800 layout. :)
thanks kin and popkorn!
(https://i.imgur.com/jCZAFcH.jpg)
Post by: iamtootallforthis on Sun, 01 April 2018, 00:50:43
i already crossposted this several times, but i should really post a pic here too. this just arrived in the mail this week.
it's an awesome looking board for sure. my first 1800 layout. :)
thanks kin and popkorn!Show Image(https://i.imgur.com/jCZAFcH.jpg)
Spumoni works perfectly with that setup man! I want a TX1800 so bad
Post by: clik_clak on Sun, 01 April 2018, 00:52:03
Maybe I won't keep my fingers crossed for seeing any TX-CP's or 1800's anytime soon.
Post by: Puddsy on Sun, 01 April 2018, 01:27:31
So R2 1800's are just starting to ship out? Am I correct that it took almost a year?
Maybe I won't keep my fingers crossed for seeing any TX-CP's or 1800's anytime soon.
they shipped a while ago
Post by: duynguyenle on Sun, 01 April 2018, 06:07:53
So R2 1800's are just starting to ship out? Am I correct that it took almost a year?
Maybe I won't keep my fingers crossed for seeing any TX-CP's or 1800's anytime soon.
I got mine months ago
Post by: Jae-3soteric on Sun, 01 April 2018, 08:55:04
So R2 1800's are just starting to ship out? Am I correct that it took almost a year?
Maybe I won't keep my fingers crossed for seeing any TX-CP's or 1800's anytime soon.
I got mine in December
Sent from my iPhone using Tapatalk
Post by: packman86 on Sun, 01 April 2018, 11:27:37
So R2 1800's are just starting to ship out? Am I correct that it took almost a year?
Maybe I won't keep my fingers crossed for seeing any TX-CP's or 1800's anytime soon.
I got my TX-CP in late November.
Post by: OmegaSupreme on Sun, 01 April 2018, 13:24:09
So R2 1800's are just starting to ship out? Am I correct that it took almost a year?
Maybe I won't keep my fingers crossed for seeing any TX-CP's or 1800's anytime soon.
I believe the antique colour Tx1800's will be available next month. Possibly the powder coated white as well.
Post by: gandroider on Wed, 18 April 2018, 01:50:05
Thank you should there be anyone mind to help me for this.
Post by: jihadu on Wed, 18 April 2018, 04:50:56
Post by: OmegaSupreme on Wed, 18 April 2018, 07:32:41
Since arrived few months ago, I found that my PCB for TX1800v2 is kind of error. Is there any way to contact kin to buy the PCB only? I've already contacted him through Telegram but the last time he logged in is 3 April.
Thank you should there be anyone mind to help me for this.
I would go on txkeyboards.com and create a support ticket.
They should be able to help you out.
Sent from my iPhone using Tapatalk
Post by: wholypantalones on Wed, 18 April 2018, 13:00:31
Since arrived few months ago, I found that my PCB for TX1800v2 is kind of error. Is there any way to contact kin to buy the PCB only? I've already contacted him through Telegram but the last time he logged in is 3 April.
Thank you should there be anyone mind to help me for this.
If you go to the first page and first post in this thread his profile has an email or personal message link. Go to txkeyboards.com and fill out a support ticket or find popkorn62.
Post by: gandroider on Wed, 18 April 2018, 17:47:44
If I am not mistaken, the TX-1800 is fully compatible the OG 1800 PCB, so perhaps other aftermarket 1800 PCB's will be as well. I would suggest asking someone who actually has another 1800 PCB and a TX1800 to see whether they are compatible. Just a thought, if kin is unable to provide you with a replacement PCB
I would go on txkeyboards.com and create a support ticket.
They should be able to help you out.
Sent from my iPhone using Tapatalk
If you go to the first page and first post in this thread his profile has an email or personal message link. Go to txkeyboards.com and fill out a support ticket or find popkorn62.
Dear All,
Thank you for your assistance. I've report a ticket to the txkeyboards.com and the admin is arranging for a replacement but will discuss it first with kin25.
I will also pm popkorn62 for assistance.
Post by: wholypantalones on Wed, 18 April 2018, 18:36:07
If I am not mistaken, the TX-1800 is fully compatible the OG 1800 PCB, so perhaps other aftermarket 1800 PCB's will be as well. I would suggest asking someone who actually has another 1800 PCB and a TX1800 to see whether they are compatible. Just a thought, if kin is unable to provide you with a replacement PCB
I would go on txkeyboards.com and create a support ticket.
They should be able to help you out.
Sent from my iPhone using Tapatalk
If you go to the first page and first post in this thread his profile has an email or personal message link. Go to txkeyboards.com and fill out a support ticket or find popkorn62.
Dear All,
Thank you for your assistance. I've report a ticket to the txkeyboards.com and the admin is arranging for a replacement but will discuss it first with kin25.
I will also pm popkorn62 for assistance.
popkorn62 runs txkeyboards I believe.
Post by: Uleoja on Fri, 20 April 2018, 11:57:42
Will you ever offer just tops or bottoms to the cases? Like if I wanted to get a 2nd silver top or a different color?
Post by: popkorn62 on Fri, 20 April 2018, 17:15:06
If I am not mistaken, the TX-1800 is fully compatible the OG 1800 PCB, so perhaps other aftermarket 1800 PCB's will be as well. I would suggest asking someone who actually has another 1800 PCB and a TX1800 to see whether they are compatible. Just a thought, if kin is unable to provide you with a replacement PCB
I would go on txkeyboards.com and create a support ticket.
They should be able to help you out.
Sent from my iPhone using Tapatalk
If you go to the first page and first post in this thread his profile has an email or personal message link. Go to txkeyboards.com and fill out a support ticket or find popkorn62.
Dear All,
Thank you for your assistance. I've report a ticket to the txkeyboards.com and the admin is arranging for a replacement but will discuss it first with kin25.
I will also pm popkorn62 for assistance.
popkorn62 runs txkeyboards I believe.
both kin25 and I do. He's usually the one who answers technical questions. I am more on the operational side.
Kin/popkorn62,I highly doubt it. :(
Will you ever offer just tops or bottoms to the cases? Like if I wanted to get a 2nd silver top or a different color?
Post by: kin25 on Thu, 19 July 2018, 08:23:31
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Post by: Petch on Thu, 19 July 2018, 08:30:42
Tx white keyboardsKin can you reply to me on Telegraph please, or let me know the best place to contact you
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Post by: clik_clak on Thu, 19 July 2018, 08:34:37
Tx white keyboards
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Kin,
On your blog, you are showing BOK style cases for the TXCP. Is this run for the BOK style case, or is it for the actual TXCP style?
I already own a BOK so I'm only interested if its going to be the TXCP style.
Post by: KetchyKech on Thu, 19 July 2018, 08:36:40
Tx white keyboards
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
wow this is great! wish my tx1800 was white :P
kin, is it possible to just be invoiced for a LZ-Iron PCB?
Post by: shadowrealmwarez on Thu, 19 July 2018, 08:37:37
Tx white keyboards
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Any photo's of the white TX1800v2?
Post by: Hexterdude on Thu, 19 July 2018, 14:39:48
Post by: clik_clak on Thu, 19 July 2018, 14:44:17
is it possible to get a pic of all the white keyboards so we can see how they will look?
http://blog.naver.com/storyphoto/viewer.jsp?src=https%3A%2F%2Fblogfiles.pstatic.net%2FMjAxODA3MTFfNjUg%2FMDAxNTMxMzE5MTE1Mjcz.VPb8qAkVm570q0xnLiE1_lZH3t10OlJ2vx5ye7t_fPcg.GwnHHA9Z8d1CJHwudHP8wOL13e7T40zA_HSufr_8HO4g.JPEG.225ozzy%2F20180711_215753.jpg
That pic shows the white versions, but if you look closely, the 1800 and CP both are not the normal TX style. The CP looks like a BOK and the 1800 doesn't look like any TX variant done in the past...
I really hope Kin does clarify if these are indeed V2's/CP's or if these are something new.
Post by: smittysteve on Thu, 19 July 2018, 14:50:20
is it possible to get a pic of all the white keyboards so we can see how they will look?
http://blog.naver.com/storyphoto/viewer.jsp?src=https%3A%2F%2Fblogfiles.pstatic.net%2FMjAxODA3MTFfNjUg%2FMDAxNTMxMzE5MTE1Mjcz.VPb8qAkVm570q0xnLiE1_lZH3t10OlJ2vx5ye7t_fPcg.GwnHHA9Z8d1CJHwudHP8wOL13e7T40zA_HSufr_8HO4g.JPEG.225ozzy%2F20180711_215753.jpg
That pic shows the white versions, but if you look closely, the 1800 and CP both are not the normal TX style. The CP looks like a BOK and the 1800 doesn't look like any TX variant done in the past...
I really hope Kin does clarify if these are indeed V2's/CP's or if these are something new.
Very keen eye- been studying them since you shared this (thank you!) and I’m very interested in the answer as well! I like the CP shown because it’s different than the past versions and the straight line is of course classy. But the lip is also what makes these babies so unique and pretty. I am very torn. Also interesting the appearance on the form of TX87se, though not shown on the image. First SE batch was only 84s I’m pretty sure.
Beautiful boards though, Kin. Stoked to get one of them!!
Post by: DillonHightower on Thu, 19 July 2018, 21:46:20
Post by: Jubileus on Thu, 19 July 2018, 23:04:54
Post by: OracleKev on Fri, 20 July 2018, 00:20:24
Can we get a pic explaining what each option is in the form? I can guess about 75% of which is which . But am in question about a couple of those in the pic shown .
Just throw in the questions here? I'm sure folks here can explain whatever option there.
Post by: Venediction on Fri, 20 July 2018, 00:21:03
Post by: wholypantalones on Fri, 20 July 2018, 05:05:03
So Round 2 is live.. Does that mean I can join in and get my hands on a TX1800v2?
If you open the form, you'll answer your own question.
Post by: neon_tom on Sat, 21 July 2018, 08:44:27
is it possible to get a pic of all the white keyboards so we can see how they will look?
http://blog.naver.com/storyphoto/viewer.jsp?src=https%3A%2F%2Fblogfiles.pstatic.net%2FMjAxODA3MTFfNjUg%2FMDAxNTMxMzE5MTE1Mjcz.VPb8qAkVm570q0xnLiE1_lZH3t10OlJ2vx5ye7t_fPcg.GwnHHA9Z8d1CJHwudHP8wOL13e7T40zA_HSufr_8HO4g.JPEG.225ozzy%2F20180711_215753.jpg
That pic shows the white versions, but if you look closely, the 1800 and CP both are not the normal TX style. The CP looks like a BOK and the 1800 doesn't look like any TX variant done in the past...
I really hope Kin does clarify if these are indeed V2's/CP's or if these are something new.
Sent from my iPhone using Tapatalk
Post by: Hongook on Mon, 23 July 2018, 01:22:06
Post by: OracleKev on Mon, 23 July 2018, 01:41:29
Interested in more information about the white finish. Only example I could find around was someone selling a TX-1800 v2 on mechmarket with MAO white finish. Is this run of white the same?
They can't be the same since these new white models haven't sold yet. Kin hasn't described details, but he did say these finishes are paint based. MAO is an anodization process.
Post by: BOK on Mon, 23 July 2018, 01:59:08
Hard to tell from the pic but I assume the finish is powder coat? Or is it something else? Anyone know if they have a matte or glossy finish?is it possible to get a pic of all the white keyboards so we can see how they will look?
http://blog.naver.com/storyphoto/viewer.jsp?src=https%3A%2F%2Fblogfiles.pstatic.net%2FMjAxODA3MTFfNjUg%2FMDAxNTMxMzE5MTE1Mjcz.VPb8qAkVm570q0xnLiE1_lZH3t10OlJ2vx5ye7t_fPcg.GwnHHA9Z8d1CJHwudHP8wOL13e7T40zA_HSufr_8HO4g.JPEG.225ozzy%2F20180711_215753.jpg
That pic shows the white versions, but if you look closely, the 1800 and CP both are not the normal TX style. The CP looks like a BOK and the 1800 doesn't look like any TX variant done in the past...
I really hope Kin does clarify if these are indeed V2's/CP's or if these are something new.
Sent from my iPhone using Tapatalk
The cp shown in the picture is a sample of bok.cp test version.
Tx- cp and ,1800 v2 will be preformed to white with no changes to existing designs.
Post by: shadowrealmwarez on Tue, 24 July 2018, 09:14:53
Post by: clik_clak on Tue, 24 July 2018, 09:19:48
Has anyone gotten an invoice yet, or additional info? Trying my luck at getting a TX1800v2 ....
There's no luck involved, and the form doesn't close until the 28th. Expect an invoice in the coming week after that. Kin is pretty well known for taking his time with everything.
Kin also said he doesn't like exclusivity and if he gets more orders than expected, he'll get more stock.
Post by: shadowrealmwarez on Tue, 24 July 2018, 09:20:51
Has anyone gotten an invoice yet, or additional info? Trying my luck at getting a TX1800v2 ....
There's no luck involved, and the form doesn't close until the 28th. Expect an invoice in the coming week after that. Kin is pretty well known for taking his time with everything.
Kin also said he doesn't like exclusivity and if he gets more orders than expected, he'll get more stock.
Well that is fantastic news then.
Post by: shadowrealmwarez on Wed, 01 August 2018, 10:50:19
Post by: Krytone on Wed, 01 August 2018, 20:06:54
Anyone seen an invoice yet?i thought he said in a month after the form closed.
Post by: alisonica on Thu, 02 August 2018, 05:57:50
Tx white keyboardsPlaced my order!
https://goo.gl/forms/2hkRnjUw7ztLuHbn1
Will there be an order check? :p
Post by: PoochZag on Thu, 02 August 2018, 07:36:02
Post by: alisonica on Fri, 03 August 2018, 08:02:20
Post by: shadowrealmwarez on Fri, 03 August 2018, 08:03:52
Got and paid my invoice, FYI I ordered a ton of bags and 1800V2 White. I don't understand what that Golden Gasket meant in the invoice tbh. :p
Did your invoice specify a bag? I thought I ordered a bag but I don't see it on the invoice. And the form is closed so I cant check what options there were.
Post by: alisonica on Fri, 03 August 2018, 10:37:37
Got and paid my invoice, FYI I ordered a ton of bags and 1800V2 White. I don't understand what that Golden Gasket meant in the invoice tbh. :p
Did your invoice specify a bag? I thought I ordered a bag but I don't see it on the invoice. And the form is closed so I cant check what options there were.
On the main TX-1800 chunk it doesn't specify a bag,, but i bought numerous bags for 60% and 80% and those showed up on the invoice. :p
Best to check it with Kin though.
Post by: poolside on Fri, 03 August 2018, 17:09:13
Got and paid my invoice, FYI I ordered a ton of bags and 1800V2 White. I don't understand what that Golden Gasket meant in the invoice tbh. :p
The golden gasket option should be the upgrade from the regular acrylic diffuser to the "gold-plated" spacer.
Post by: alisonica on Fri, 03 August 2018, 18:13:31
Got and paid my invoice, FYI I ordered a ton of bags and 1800V2 White. I don't understand what that Golden Gasket meant in the invoice tbh. :p
The golden gasket option should be the upgrade from the regular acrylic diffuser to the "gold-plated" spacer.
Haha nice, at first I thought it was a real gasket like the one on OTD356 Mini. ;D
Post by: shadowrealmwarez on Sat, 11 August 2018, 12:20:55
Post by: Krytone on Mon, 13 August 2018, 00:26:18
Post by: shadowrealmwarez on Wed, 05 September 2018, 12:54:55
Post by: Krytone on Wed, 12 September 2018, 20:29:11
Post by: kin25 on Wed, 12 September 2018, 20:30:36
So, factory is working again now.
In September, it will be finished and shipped.
Post by: shadowrealmwarez on Wed, 12 September 2018, 20:33:02
There was a color problem.
So, factory is working again now.
In September, it will be finished and shipped.
Thanks for the update Kin, any photos of the boards with the white color?
Post by: Krytone on Wed, 12 September 2018, 21:35:09
There was a color problem.Appreciate the updates :thumb:
So, factory is working again now.
In September, it will be finished and shipped.
Post by: Krytone on Mon, 24 September 2018, 21:13:59
There was a color problem.hi Kin, just would like to get updates if this is still feasible since its almost end of September. Thanks.
So, factory is working again now.
In September, it will be finished and shipped.
Post by: kin25 on Tue, 25 September 2018, 05:00:34
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
[attachimg=1]
[attachimg=2]
Post by: shadowrealmwarez on Tue, 25 September 2018, 12:27:53
Sorry,
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
(Attachment Link)
(Attachment Link)
That white looks fantastic! Kin I did send you a message at one point about if my invoice came with a TX bag or not.
Post by: Wongstongs on Tue, 25 September 2018, 16:35:16
Sorry,
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
(Attachment Link)
(Attachment Link)
Post by: Krytone on Wed, 26 September 2018, 02:23:26
Sorry,:-*
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
(Attachment Link)
(Attachment Link)
Has it been confirmed what kind or coating is done with the white boards? Is it powder coat?
Post by: kin25 on Wed, 26 September 2018, 04:57:02
Sorry,:-*
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
(Attachment Link)
(Attachment Link)
Has it been confirmed what kind or coating is done with the white boards? Is it powder coat?
Spray coating and heat treatment.
Post by: Krytone on Wed, 26 September 2018, 20:17:54
Thanks man! Appreciate all the fast reply :-*Sorry,:-*
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
(Attachment Link)
(Attachment Link)
Has it been confirmed what kind or coating is done with the white boards? Is it powder coat?
Spray coating and heat treatment.
Post by: shadowrealmwarez on Tue, 02 October 2018, 15:50:06
Post by: wholypantalones on Tue, 02 October 2018, 16:02:34
Sorry,:-*
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
(Attachment Link)
(Attachment Link)
Has it been confirmed what kind or coating is done with the white boards? Is it powder coat?
Spray coating and heat treatment.
So, powder coat then?
Post by: Krytone on Wed, 03 October 2018, 20:28:29
Thats also how i understood his statement.Sorry,:-*
A few were finished and assembled
Here are some pics.
The last of white painting will be finished till tonight.
I will pack and send them next week.
(Attachment Link)
(Attachment Link)
Has it been confirmed what kind or coating is done with the white boards? Is it powder coat?
Spray coating and heat treatment.
So, powder coat then?
So now we're in the first week of October, anyone receive theirs by chance :D
From the other TX thread, its states he will start shipping October 4. So hopefully that is still true.
Post by: Miotch92 on Fri, 05 October 2018, 12:38:00
Post by: Krytone on Sun, 07 October 2018, 22:49:22
Post by: shadowrealmwarez on Mon, 08 October 2018, 15:56:02
Post by: djaeyun on Tue, 09 October 2018, 15:11:10
Post by: thinkriver on Tue, 09 October 2018, 15:57:59
Post by: funkybeat7 on Tue, 09 October 2018, 16:00:07
Sent from my iPhone using Tapatalk
Post by: dyka.tran on Wed, 10 October 2018, 23:48:06
Is the case plastic or CNC aluminium ? Thanks.
Of course it's aluminum, Kin doesn't make plastic case.
Post by: thinkriver on Thu, 11 October 2018, 03:54:30
Post by: OracleKev on Mon, 15 October 2018, 11:14:59
Post by: shadowrealmwarez on Mon, 15 October 2018, 11:16:06
White finish is simply amazing!
Did you get a shipping notification? I am kind of expecting it to just show up at my door.
Post by: OracleKev on Mon, 15 October 2018, 11:20:23
White finish is simply amazing!
Did you get a shipping notification? I am kind of expecting it to just show up at my door.
I got it through Korean GB. Don’t if worldwide orders shipped or not...
Sent from my iPhone using Tapatalk
Post by: shadowrealmwarez on Thu, 25 October 2018, 10:45:36
Post by: Krytone on Fri, 26 October 2018, 23:39:44
Post by: shadowrealmwarez on Mon, 29 October 2018, 15:13:28
Post by: Italian_Spidrman on Sat, 03 November 2018, 12:06:36
Post by: gain on Mon, 05 November 2018, 05:11:12
Thankfully, it was wrongly delivered to a business who are now on a first name basis with me as this is not the first time someones looked at 3105 and gone "nah today you're 3004".
Oh well, it's here. It looks brilliant in person (White TX1800v2).
Post by: ConfuseBill on Mon, 05 November 2018, 05:59:36
US here. Mine just arrived.
Hi, just wanna ask silly question. How does the white paint feel? Does it feel like it's going to chip if accidentally hit by a ruler or pen?
cause im thinking to get a white one.
Post by: Krytone on Tue, 06 November 2018, 22:42:56
Post by: KeyCap75 on Thu, 08 November 2018, 04:51:11
It’s massive! :eek: But so beautiful!
Thanks Kin! :thumb:
Now begins the long wait for the Zilents V2 and the GMK TA 90 keycaps… :(
Post by: laughatpain on Tue, 13 November 2018, 15:56:59
Had switches prepped but tested the pcb before soldering and found two rows would trigger at once (O and L or 4 and R for example) but not on the bottom row. Firmware issue or hardware issue? I did notice some copper showing on a trace but its hard to debug without the schematic.
Has anyone else had this problem? I also submitted a ticket on Kin's website just in case.
Reposting from the other TX thread for help.
Post by: shadowrealmwarez on Tue, 13 November 2018, 15:58:26
My white TX1800 V2 arrived randomly on the 5th and its till waiting to be built!
Had switches prepped but tested the pcb before soldering and found two rows would trigger at once (O and L or 4 and R for example) but not on the bottom row. Firmware issue or hardware issue? I did notice some copper showing on a trace but its hard to debug without the schematic.
Has anyone else had this problem? I also submitted a ticket on Kin's website just in case.
Reposting from the other TX thread for help.
This reminds me I really should test it when I get home this weekend.
Post by: kin25 on Sun, 27 January 2019, 23:28:26
extra preorder form
Post by: neon_tom on Fri, 19 April 2019, 22:04:59
Post by: jihadu on Tue, 23 April 2019, 20:04:59
Is there any chance for another round of 1800s any time soon? Preferably in standard colours since last couple rounds were white and antique.I second this. The 1800 looks stunning
Post by: kelasol on Tue, 23 April 2019, 21:21:10
Post by: whykayallday on Mon, 11 January 2021, 22:32:33