[GB]LUSTRO Aluminum + Acrylic Custom 60% Case [Packing]

[Geekmie]

Yeah, if there are enough people on board (looks like ~3 atm?) and bazh is ok with me changing my order a second time, I'd switch to dark turquoise.

Dark turquoise hype! Bazh I would like my blue changed to this dark turquoise as well if possible 

Why not just go for sky blue AND dark turquoise~ Forget about gold. Be a diehard blue fan

[WOMBO]

I have a couple of questions,
1. Does this case only fit winkeyless' PCBs?

this should fit any standard 60% since wkl pcbs are standard fitting.

[Gengarfan]

Yeah, if there are enough people on board (looks like ~3 atm?) and bazh is ok with me changing my order a second time, I'd switch to dark turquoise.

Dark turquoise hype! Bazh I would like my blue changed to this dark turquoise as well if possible 

Why not just go for sky blue AND dark turquoise~ Forget about gold. Be a diehard blue fan

I'm only getting gold if the smokey acrylic gets made... if I could I would just buy every option lol

[UsualSuspectXXX]

Yeah, if there are enough people on board (looks like ~3 atm?) and bazh is ok with me changing my order a second time, I'd switch to dark turquoise.

Dark turquoise hype! Bazh I would like my blue changed to this dark turquoise as well if possible 

Why not just go for sky blue AND dark turquoise~ Forget about gold. Be a diehard blue fan

I'm only getting gold if the smokey acrylic gets made... if I could I would just buy every option lol

I agree about the gold and smoke. That was really the combination that I wanted the most. I'll be in for a sky blue and something else, just don't know what yet.

[Erysichthon]

I have a couple of questions,
1. Does this case only fit winkeyless' PCBs?

this should fit any standard 60% since wkl pcbs are standard fitting.

Awesome, thank you!

[Sifo]

****ty pic but what would match this plate



cuz that's what i'm putting in it. I'm torn between the cyan and deep sky blue right now, leaning towards the cyan a little.

[Gengarfan]

****ty pic but what would match this plate

Show Image

cuz that's what i'm putting in it. I'm torn between the cyan and deep sky blue right now, leaning towards the cyan a little.

We are trying to get the cyan people to unify enough to get "dark turquoise" and it would be really helpful if you chose that if you went the cyan route but no pressure there. Both the dark turquoise and sky blue would look really nice with that plate probably. I don't know if you could go wrong with either.

[Sifo]

I don't prefer dark turquoise so if that makes it and cyan doesnt then I'll just go with the deep sky blue, no problems here

[bazh]

Here's the post on Weaven thread, what do you think?

well the color appears to me look very much like a darker shade of cyan, no tone different, perharps we can compromise on that with 'Cyan' people ? A medium shade between the 2 is kind of work for me.

Dark cyan works for me I guess. You can group us together, but the final color can be still open for discussion later. We have other teal people on the list. Wonder how their thoughts on this are~

If you're ok with that then the color is secured MoQ

[murkey]

Here's the post on Weaven thread, what do you think?

well the color appears to me look very much like a darker shade of cyan, no tone different, perharps we can compromise on that with 'Cyan' people ? A medium shade between the 2 is kind of work for me.

Dark cyan works for me I guess. You can group us together, but the final color can be still open for discussion later. We have other teal people on the list. Wonder how their thoughts on this are~

If you're ok with that then the color is secured MoQ

Dark light-greenish-blue ftw!!! Seriously though, I can't wait for this. I think I'm going to call it "Happiness and Cyan"

[Ngt]

Do you know approximately how much will the case weigh?


Concerning the plate, as you separate ISO and ANSI, does your ANSI plate allow for 1u RShift? I use ANSI but I need that 1 extra key that ISO layout has there.


Do you have a picture for the difference between sandblasted and waterclear? Is sandblasted = frost?


EDIT: No need to answer the last question, I got the answer from the thread. I didn't read it thoroughly enough. But a smoked finished instead of a waterclear acrylic polished finish sounded better as others proposed.

[Geekmie]

****ty pic but what would match this plate

Show Image

cuz that's what i'm putting in it. I'm torn between the cyan and deep sky blue right now, leaning towards the cyan a little.

It's a beautiful plate~ Sky blue will just match it gorgeously :D

[Sifo]

I actually just switched to purple, I'll use the sky blue plate in a different build. But I have a long time project I need to complete!

[Ngt]

Is an HHKB style plate is possible (I forgot to ask earlier as I misread the OP)? I mean a top plate with a bottom row without the CTRL key holes. Which would give some like that 1-1.5-7-1.5-1 with a 7u space bar.

[bazh]

Hi guys, I'm just back online after a long flight yesterday, havent got time yet so just so you now I'll reply all the mesages and post tonight, no worry if you have any


Sent from my iPhone using Tapatalk

[muon]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

[Sifo]

Yeah has there been a picture of an assembled one with underglow active? That's what I'd like to see

[Ngt]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

According to the OP, there are 3 slots left.

Yeah has there been a picture of an assembled one with underglow active? That's what I'd like to see

 


That's definitely something I'd like to see as well.




I'm waiting for an HHKB plate style confirmation before I jump on it. Hope I'll get the answer before the 30th.

[Geekmie]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

According to the OP, there are 3 slots left.

Well, that might not be updated. There are a lot more than 30 orders in the spreadsheet already. Don't know if there is an upper limit though.

[Ngt]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

According to the OP, there are 3 slots left.

Well, that might not be updated. There are a lot more than 30 orders in the spreadsheet already. Don't know if there is an upper limit though.

The OP states that there are a 30 orders cap. If we have already gone through it and it wouldn't be extended then ...    Perhaps there will be a 2nd round with HHKB style plate.

[pear_voz]

Wew, the rumor said that the GB will be no limit in number of order, just make sure that you join it be4 the deadline :3

[Ngt]

Wew, the rumor said that the GB will be no limit in number of order, just make sure that you join it be4 the deadline :3

Alright so I'd better ask him directly about my questions then. Do you know if the sandblasted will be a smoked acrylic or the rubbed version? I read earlier that bazh was looking into it but didn't remember reading an update about it.

[UsualSuspectXXX]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

According to the OP, there are 3 slots left.

Well, that might not be updated. There are a lot more than 30 orders in the spreadsheet already. Don't know if there is an upper limit though.

The OP states that there are a 30 orders cap. If we have already gone through it and it wouldn't be extended then ...    Perhaps there will be a 2nd round with HHKB style plate.

The way I read it is that the deadline is May 30 and if there were not 30 orders by then, it would be extended until there was.

Order deadline is 2 weeks, or when 30 orders is up  Currently just keep in mind that deadline will be May 30th.

[Ngt]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

According to the OP, there are 3 slots left.

Well, that might not be updated. There are a lot more than 30 orders in the spreadsheet already. Don't know if there is an upper limit though.

The OP states that there are a 30 orders cap. If we have already gone through it and it wouldn't be extended then ...    Perhaps there will be a 2nd round with HHKB style plate.

The way I read it is that the deadline is May 30 and if there were not 30 orders by then, it would be extended until there was.

Order deadline is 2 weeks, or when 30 orders is up  Currently just keep in mind that deadline will be May 30th.

Oh ok, didn't get it that way at all. If that's the case, they were all good! Thanks for clarifying.

[UsualSuspectXXX]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

According to the OP, there are 3 slots left.

Well, that might not be updated. There are a lot more than 30 orders in the spreadsheet already. Don't know if there is an upper limit though.

The OP states that there are a 30 orders cap. If we have already gone through it and it wouldn't be extended then ...    Perhaps there will be a 2nd round with HHKB style plate.

The way I read it is that the deadline is May 30 and if there were not 30 orders by then, it would be extended until there was.

Order deadline is 2 weeks, or when 30 orders is up  Currently just keep in mind that deadline will be May 30th.

Oh ok, didn't get it that way at all. If that's the case, they were all good! Thanks for clarifying.

That's how I took it anyway. I guess we should wait for @bazh to confirm.

[Ngt]

Hey, welcome back! How many slots are left in the GB?

Also, do you happen to have any more pictures of an assembled Lustro? 

According to the OP, there are 3 slots left.

Well, that might not be updated. There are a lot more than 30 orders in the spreadsheet already. Don't know if there is an upper limit though.

The OP states that there are a 30 orders cap. If we have already gone through it and it wouldn't be extended then ...    Perhaps there will be a 2nd round with HHKB style plate.

The way I read it is that the deadline is May 30 and if there were not 30 orders by then, it would be extended until there was.

Order deadline is 2 weeks, or when 30 orders is up  Currently just keep in mind that deadline will be May 30th.

Oh ok, didn't get it that way at all. If that's the case, they were all good! Thanks for clarifying.

That's how I took it anyway. I guess we should wait for @bazh to confirm.

Of course, but after reading it again your point makes sense.

[bazh]

At first I expected a much slower order so 30 is my estimation for quick run, but it turned out we passed that in just one day so we're not doing order cap anymore

[tomboy]

What are the outer dimensions of the case/stands?
(I'm interested to see if I can put this over a 15" mbp's keyboard without touching the keys.)

[bazh]

I put it on a 13" one and it did just fine

Update on colors:

[Photekq]

Looking at the full kit that you offer, I guess you will be ordering b.faces from wkl.kr? Can we order b.faces from you without the assembly service and have them shipped along with our cases?

[Gengarfan]

I put it on a 13" one and it did just fine

Update on colors:

Show Image

Just a heads up, I think a few people including myself voted for dark turquoise from that one color sample posted awhile back :)

[bazh]

I put it on a 13" one and it did just fine

Update on colors:

Show Image

Just a heads up, I think a few people including myself voted for dark turquoise from that one color sample posted awhile back :)

**** I forgot, your order is now 1 golden and 1 sky blue so which one you want to change? :(

[bazh]

Looking at the full kit that you offer, I guess you will be ordering b.faces from wkl.kr? Can we order b.faces from you without the assembly service and have them shipped along with our cases?

Totally, I can include some PCB as well when we order from wkl.


Quick phone potato pics:




More quality photos tomorrows

[Gengarfan]

I put it on a 13" one and it did just fine

Update on colors:

Show Image

Just a heads up, I think a few people including myself voted for dark turquoise from that one color sample posted awhile back :)

**** I forgot, your order is now 1 golden and 1 sky blue so which one you want to change? :(

I think Just the dark turquoise with the frosted sandblasted case will be enough. We can cross off the other two. Thanks for changing my order so many times haha

[bazh]

I put it on a 13" one and it did just fine

Update on colors:

Show Image

Just a heads up, I think a few people including myself voted for dark turquoise from that one color sample posted awhile back :)

**** I forgot, your order is now 1 golden and 1 sky blue so which one you want to change? :(

I think Just the dark turquoise with the frosted sandblasted case will be enough. We can cross off the other two. Thanks for changing my order so many times haha

also just a reminder, dark turquoise will now be list as cyan as I explained earlier :thumb:

[Ngt]

Looking at the full kit that you offer, I guess you will be ordering b.faces from wkl.kr? Can we order b.faces from you without the assembly service and have them shipped along with our cases?

Totally, I can include some PCB as well when we order from wkl.


Quick phone potato pics:

Show Image

More quality photos tomorrows :thumb:

**** that's really nice!


Do you know if that's possible to have an HHKB style plate (without the CTRL key holes)?


EDIT: Plus does your ANSI plate allow for split RShift? As in an ISO plate.


EDIT2: And do you know the weigh of the case + standoffs?


Sorry for all the extra questions.

[UsualSuspectXXX]

Looking at the full kit that you offer, I guess you will be ordering b.faces from wkl.kr? Can we order b.faces from you without the assembly service and have them shipped along with our cases?

Totally, I can include some PCB as well when we order from wkl.


Quick phone potato pics:

Show Image

More quality photos tomorrows :thumb:

Lookin really good. Is that the clear or the frosted acrylic?

[Ngt]

Looking at the full kit that you offer, I guess you will be ordering b.faces from wkl.kr? Can we order b.faces from you without the assembly service and have them shipped along with our cases?

Totally, I can include some PCB as well when we order from wkl.


Quick phone potato pics:

Show Image

More quality photos tomorrows :thumb:

Lookin really good. Is that the clear or the frosted acrylic?

I'd say frosted IMO.

[UsualSuspectXXX]

Looking at the full kit that you offer, I guess you will be ordering b.faces from wkl.kr? Can we order b.faces from you without the assembly service and have them shipped along with our cases?

Totally, I can include some PCB as well when we order from wkl.

Quick phone potato pics:

Show Image

More quality photos tomorrows :thumb:

Lookin really good. Is that the clear or the frosted acrylic?

I'd say frosted IMO.

It's kind of hard to tell since it's so fuzzy.

[Geekmie]

Doesn't matter. It looks just AWESOME~

[Ngt]

Doesn't matter. It looks just AWESOME~

Yep you got it!

[foggyflute]

The most requested stuff...

Still prototype version, final one will be more polished.
The thick bottom really help.



Now, non-blinker photos:

[theoriginal123123]

What's the weight of the case? Being used to the Pok3r's aluminium case, I'm a little worried as to just how stable it actually would be on the desk...

[Ngt]

The most requested stuff...

Still prototype version, final one will be more polished.
The thick bottom really help.

Show Image

Now, non-blinker photos:

Show Image

Show Image

Show Image

Show Image

Just wow! Love it. Must have it! <3


Thanks for the pictures btw!

[nickysan92]

The most requested stuff...

Still prototype version, final one will be more polished.
The thick bottom really help.

Show Image

Now, non-blinker photos:

Show Image

Show Image

Show Image

Show Image

Welp, that looks sick.

Is that the smokey acrylic or the normal acrylic?

[fancymans]

Hi Bazh, just joined in for the GB. I'm still pretty new to all this, so I have a few questions.

1. Are the LEDs SMD or 1.8mm switch mounted?
2. Is there an option to have RGB LEDs? If so, SMD or switch mounted?
3. I want winkey, do I need to specify winkey or winkeyless in the order?

Thanks 

[foggyflute]

Hi Bazh, just joined in for the GB. I'm still pretty new to all this, so I have a few questions.

1. Are the LEDs SMD or 1.8mm switch mounted?
2. Is there an option to have RGB LEDs? If so, SMD or switch mounted?
3. I want winkey, do I need to specify winkey or winkeyless in the order?

Thanks 

1. We use 2x3x4 switch mount led like this one.
2. RGB led will require a pcb that supported it, wkl.kr doesn't have any pcb with it. If you know any board that do it currently in stock, we can buy and assem for you with that one.
3. Currently there's only winkey version for Lustro, so no need for any specification.

[Geekmie]

The most requested stuff...

Still prototype version, final one will be more polished.
The thick bottom really help.

Show Image

Now, non-blinker photos:

Show Image

Show Image

Show Image

Show Image

Just one word:
Supercalifragilisticexpialidocius!!!

[nguyenkimtam]

I don't think that have a good anodization and a good quality acrylic case

[Ngt]

I don't think that have a good anodization and a good quality acrylic case

Show Image

I have no expertise in the matter to distinguish if you are just using irony or doing genuine complains. Which one is it?  :D