[IC] NVY X O.F Scythe 75% Aluminium Case

[NotVy]

[ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ]



Fully Anodized one arrived.

it's Matt Black.

Very Matt, so it gonna be changed.

Price is 340$ Fixed, Top, Bottom, Aluminium Plate, not including PCB


*****Specification*****

Aluminium 6061 Fully Anodized

Layout : 75%

PCB : B.MINI(Support Bootmapper Client)

Plate : Aluminium, STS(option)

Price : 340$ not including PCB ( PCB is available in http://winkeyless.kr )

Quantity : Limited up to 30

[megaforce]

Hello and welcome!!   

Could you list the details of the case? Slope angles, colors being offered, supported layouts, plate material, and more?

[NotVy]

Hello and welcome!!   

Could you list the details of the case? Slope angles, colors being offered, supported layouts, plate material, and more?

Thanks for your greetings.

I listed up for your asking.

[Unforgivable]

(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)
Hi, Nice to meet ya'll.

I'm planning to product new Aluminium Housing, Especially motivated Korean Traditional Architects - Han-ok -

I need your support and opinions.

Here are some Renderings..

Full - Aluminium , MCT Machined..

Support 75% Layout, Plate(SUS, Anodized Aluminium) fits B.MINI PCB.

I can offer Hard Anodized colors, and soft color (Matt Black, Glossy Black, Gold, Red, Blue, Silver)

Slope Angle may be 8, but it can be changed.

Some samples will be arrived soon.

I wonder if i can mass-drop or group buying.

Thank you.

Wow. Very interested, it looks great and the slope is comfortable too. Just to make sure, this will be a top mounted plate, right?

Any chance you'd be able to have a brass weight on the inside or bottom of the case?

Would it be possible to also make coated brass plates?

[NotVy]

(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)
Hi, Nice to meet ya'll.

I'm planning to product new Aluminium Housing, Especially motivated Korean Traditional Architects - Han-ok -

I need your support and opinions.

Here are some Renderings..

Full - Aluminium , MCT Machined..

Support 75% Layout, Plate(SUS, Anodized Aluminium) fits B.MINI PCB.

I can offer Hard Anodized colors, and soft color (Matt Black, Glossy Black, Gold, Red, Blue, Silver)

Slope Angle may be 8, but it can be changed.

Some samples will be arrived soon.

I wonder if i can mass-drop or group buying.

Thank you.

Wow. Very interested, it looks great and the slope is comfortable too. Just to make sure, this will be a top mounted plate, right?

Any chance you'd be able to have a brass weight on the inside or bottom of the case?

Would it be possible to also make coated brass plates?

(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)
Hi, Nice to meet ya'll.

I'm planning to product new Aluminium Housing, Especially motivated Korean Traditional Architects - Han-ok -

I need your support and opinions.

Here are some Renderings..

Full - Aluminium , MCT Machined..

Support 75% Layout, Plate(SUS, Anodized Aluminium) fits B.MINI PCB.

I can offer Hard Anodized colors, and soft color (Matt Black, Glossy Black, Gold, Red, Blue, Silver)

Slope Angle may be 8, but it can be changed.

Some samples will be arrived soon.

I wonder if i can mass-drop or group buying.

Thank you.

Wow. Very interested, it looks great and the slope is comfortable too. Just to make sure, this will be a top mounted plate, right?

Any chance you'd be able to have a brass weight on the inside or bottom of the case?

Would it be possible to also make coated brass plates?

Thank you for your interest.

yeah, top mounted plate, basically.

I'm planning Weight plate on bottom of the case, but unfortunately brass is not my option till now. because of Price.

I will contact factory for your request. thanks.

[dubious]

안녕하세요~~

Welcome to geekhack NotVy!

What do you mean when you say hard and soft colors? Is it two different anodizing processes?

[NotVy]

안녕하세요~~

Welcome to geekhack NotVy!

What do you mean when you say hard and soft colors? Is it two different anodizing processes?

Yeah,
Hard Anodizing is only for Grey.

[kjh2696]

it's look like very similar some keyboard design did u know that?
or did u get permission from him?

[NotVy]

Hi, Thank you for your interest.
From what?

Design Motivation is based on Kyoungbok-goong, especially Min-bi's house and Kyoung-hoi-roo.

I Swear I never copied any other Kbd designs.

Some says its side lines look similar to Duck Octagon series, but.. I don't know what they say.

As I see, it is totally different.

[kjh2696]

four side of upper plate and
 
side of duck octagon
well design looks like preety cool whatever i hope GB start ASAP

[NotVy]

Show Image

four side of upper plate and
 

Show Image

side of duck octagon
well design looks like preety cool whatever i hope GB start ASAP

Yeah, I expect it.
Octagon's top plate's conner angle and mine is quite different.
And side line.. as i replied before, base, motive, Line shape are totally different.

Thank you for your support.

[kconfire]

Looks nice, but it definitely has the look of some of the other well known custom keyboards.
That is not to say you copied someone else's as only you would know how you came up with the design.

Good luck!

[Xx360noscopexX]

OK....

Hi everyone, who is reading this IC post.

As you see this pic
(this is the Unicorn Legend keyboard which is going to run group buy)

https://i.imgur.com/VVwycQF.jpg
 
He was copied this keyboard's bottom plate design to his renders.

WITH NO PERMISSION TO ORIGINAL DESIGNER.

In addition, this is similar to KBD75(china made keyboard), Duck octagon.

I can't understand why he is saying "i got enlightend when i saw a traditional korean buildings!"

That is just like a kid saying a lie.

And he is known for SCAMMER in KBDLAB.CO.KR, Cooln.kr
(former is one of biggest korean keyboard community, and latter is korean hardware community)

"Don't feed the interest."

[NotVy]

Thank you for your support.

Am I scammer in KBDLAB?

And KBD75 looks similiar to AKD? Kkk

You kidding me.

Though Unicon Legend's top plate edge looks similar, You must have heard about 팔각정, 정자, 경헤루 etc.

That's my motive. If you have a time to find Unicon Legend, And try to find 팔각정.

And why are you saying my side line copied Duck Octagon?

I cannot understand

[antin0ri]

These accusations are totally ungrounded. First of all, how unique can keyboards be, given that there have been hundreds of custom designs in the past? Personally, the likeness to Unicorn / Octagon is not to the point where I'd call this a copy.
Also, I've had dealings with Notvy at kbdlab before, even purchased housing from him in the past. My experience with him has been nothing but normal. I would think I'd know if he were a well known scammer on kbdlab as I visit the site quite often.

[Niomosy]

Someone fill me in on South Korean intellectual property law here.  In the US, a keyboard like this would receive zero intellectual property protection as a Useful Article and I suspect it's roughly the same in S. Korea and most other countries, else we'd have seen IBM or similar going after everyone producing similar layout or style keyboards internationally.

Seems like much ado about nothing.

[riotonthebay]

Or maybe instead of discussing Korean IP law, we can just let the IC continue and ask that people please stop posting tenuous comparisons and unfounded accusations. Just a thought.

[evilpacket]

OK....

Hi everyone, who is reading this IC post.

As you see this pic
(this is the Unicorn Legend keyboard which is going to run group buy)

https://i.imgur.com/VVwycQF.jpg
 
He was copied this keyboard's bottom plate design to his renders.

WITH NO PERMISSION TO ORIGINAL DESIGNER.

In addition, this is similar to KBD75(china made keyboard), Duck octagon.

I can't understand why he is saying "i got enlightend when i saw a traditional korean buildings!"

That is just like a kid saying a lie.

And he is known for SCAMMER in KBDLAB.CO.KR, Cooln.kr
(former is one of biggest korean keyboard community, and latter is korean hardware community)

"Don't feed the interest."

Oi kid. I'm from kbdlab, and we're a super tight knit community. Everyone knows everyone around here.
Duck's our moderator, and if he saw this was a problem he would have contacted NotVy ages ago.
Designs can only be so different when it comes to keyboards and I sure as hell don't think some outsider should be saying **** about the hard work put into this design.
Even if it was a copy, you have no right to be saying **** like you are right now, especially because the "Original designers" (who are by the way, all part of our community) have not had any problems with this design.
And if you're gonna call someone a scammer, at least show some evidence, noscope. There isn't room for trolls like you in any community like this.

mod edit: language...

[kevinzavier]

^^^^Bro you are so right. I ****ing hate it when automatically shut these guys down for trying to build of a former design. This mech community is such a small community! Original designers are just like us and what more group buys happening. If anything, they would be ecstatic that someone is using their idea, because that means their idea was a success.

[Cocopah]

[Niomosy]

Or maybe instead of discussing Korean IP law, we can just let the IC continue and ask that people please stop posting tenuous comparisons and unfounded accusations. Just a thought.

If only it were that easy.  This stuff of "permission" and "copy" comes up regularly.  I'm all for letting the IC continue. 

[ectoplasmatic]

LOL.... all the comparisons of design is so subjective. When I look at those different pictures I see so little in common. And as others said -- design builds on what has come before, if it was good. GL with interest check, looking forward to seeing more.

[xondat]

I thought this was quite unique regarding the side profile, so not sure what others are seeing. Also if you're going to make super bold claims with a completely new account then no one is going to give a **** people you're wasting people's time. Carry on with those curves please 

[Cocopah]

Personally I like it. I don't see how its ripped off directly from a specific design. The handles are more of general design, assuming that's what is considered ripped off.

[dgneo]

OK....

Hi everyone, who is reading this IC post.

As you see this pic
(this is the Unicorn Legend keyboard which is going to run group buy)

https://i.imgur.com/VVwycQF.jpg
 
He was copied this keyboard's bottom plate design to his renders.

WITH NO PERMISSION TO ORIGINAL DESIGNER.

In addition, this is similar to KBD75(china made keyboard), Duck octagon.

I can't understand why he is saying "i got enlightend when i saw a traditional korean buildings!"

That is just like a kid saying a lie.

And he is known for SCAMMER in KBDLAB.CO.KR, Cooln.kr
(former is one of biggest korean keyboard community, and latter is korean hardware community)

"Don't feed the interest."

boi ur name is 360noscope, how the **** is anyone supposed to trust what you're saying when you have the preferred name of whiny 13 year olds across the globe?

on topic, I think this board looks great OP, hope this buy goes smoothly for you!

[kawasaki161]

Whoah, someone's had a really bad day. You even missed a few important points:
-the layout is 75% -> clear duck octagon copy
-the keyboard is angled -> obvious copy of all prior duck keyboards
-it will be made out of Aluminium -> duck also does this, oh my god. STRAIGHT UP PLAGIARISM
/sarcasm off

If people want to see similarities they will find some, and there will always be some. But unless you copy a whole keyboard I don't see a reason for this behavior.
Everyone just calm down, everything's gonna be fine.

And @NotVy don't let that one hater drag you down, if you let him do that he wins.

I'm personally not a big fan of the renders, but I'm not going to make a huge fuzz out of it, I'll just wait for the prototype pictures. If I like it, I'll buy one, if I don't like it, I won't. Easy as that.

[squeakypizza]

Whoah, someone's had a really bad day. You even missed a few important points:
-the layout is 75% -> clear duck octagon copy
-the keyboard is angled -> obvious copy of all prior duck keyboards
-it will be made out of Aluminium -> duck also does this, oh my god. STRAIGHT UP PLAGIARISM
/sarcasm off

If people want to see similarities they will find some, and there will always be some. But unless you copy a whole keyboard I don't see a reason for this behavior.
Everyone just calm down, everything's gonna be fine.

And @NotVy don't let that one hater drag you down, if you let him do that he wins.

I'm personally not a big fan of the renders, but I'm not going to make a huge fuzz out of it, I'll just wait for the prototype pictures. If I like it, I'll buy one, if I don't like it, I won't. Easy as that.

I second that.  Well put

[Niomosy]

You might as well be angry at someone picking the same car, color,  interior, and options as you. 

[Unforgivable]

When will this go into the group buy phase? I need it!

[roostrc0gburn]

[renzpwns]

Definitely interested. I need more 75% Kustoms in my life.

[Meowmeowmeowpow]

I'm interested to see the prototype. if it looks good I would go in on one.

I'm curious if you're looking into any lighting. I don't need it but i wouldn't mind seeing a mockup to see how it would look with the case.

[ihalatch]

http://kbdlab.co.kr/index.php?document_srl=4408599&mid=board_Lsno50

Awesome design bro! Love it.

[NotVy]

Plate Sample Updated.
And Bottom will be modified a littile so that reduce price.

Maybe price will be fixed at under 350USD.

Case sample will arrive soon.

[NotVy]

Sample Arrived.

[kawasaki161]

Looks interesting, if a little rough (but that could be the picture itself). This already looks better than in the renders, can't wait to see more pictures.

[RevoTeam]

This board is looking great and clearly not a copy. Keep up the good work,sir.

[NotVy]

Looks interesting, if a little rough (but that could be the picture itself). This already looks better than in the renders, can't wait to see more pictures.

Yeah, not anodized yet.

But it will be done soon!

[NotVy]

This board is looking great and clearly not a copy. Keep up the good work,sir.

Thnaks, I love your works too.

[NotVy]

Anodized one uploaded

[Petch]

People need to stop making 75% customs or I'm going to have to sell a kidney

[LEEHYOBIN]

이뻐영!! 저도 무광성애자라 화학연마 안해봤는데 이게 너무 호불호가 갈려요 손자국도 남고 스웨이드처럼 ㅋㅋ ㅋㅋ
 그냥 약간이라도 화학연마 해달라고 하세용 ><
화튕!

[NotVy]

이뻐영!! 저도 무광성애자라 화학연마 안해봤는데 이게 너무 호불호가 갈려요 손자국도 남고 스웨이드처럼 ㅋㅋ ㅋㅋ
 그냥 약간이라도 화학연마 해달라고 하세용 ><
화튕!

조언 감사합니다

공제가 실제로 진행될지도 모르고..

공장 사장님이 원하시는 방향으로 이끌어보는거라,,

실제로는 진행될지는 모르겠네요 ^^;

[dubious]

Nice to see the prototype, that thing looks heavy! I also like the matte black look, non-polished.

Good luck with sales! 

[_65535_]

키보드 조립시 무게가 어느정도 되나요?

[NotVy]

키보드 조립시 무게가 어느정도 되나요?

오늘 귀가 후 재보고 알려드리겠습니다.

미조립상태에서도 상당히 묵직합니다