Author Topic: [IC] Fox Lab PCBs reproduction (Read 18402 times)

senter · « **on:** Thu, 02 May 2019, 14:13:12 »

This is an IC for reproducing all the previous Fox Lab PCBs including Orange 80, Time TKL, Orange 75, Leaf 80, and Leaf 60.

A round of PCBs can be manufactured whenever the MOQ for a certain PCB is met.

Please fill up this form if you need a replacement PCB for your Fox Lab boards.
Filling up this form does not guarantee you will receive the invoice in a short time.

LightningXI · « **Reply #1 on:** Thu, 02 May 2019, 14:20:38 »

Is there any pricing information on these?

senter · « **Reply #2 on:** Thu, 02 May 2019, 14:27:18 »

Quote from: LightningXI on Thu, 02 May 2019, 14:20:38

Is there any pricing information on these?

I haven't got a formal quote yet but I plan to keep it about the same as the original price if not lower. This reproduction is not for profit.

LightningXI · « **Reply #3 on:** Thu, 02 May 2019, 14:30:36 »

Quote from: senter on Thu, 02 May 2019, 14:27:18

Quote from: LightningXI on Thu, 02 May 2019, 14:20:38
Is there any pricing information on these?

I haven't got a formal quote yet but I plan to keep it about the same as the original price if not lower. This reproduction is not for profit.

Fantastic to hear! I might be in for a Leaf 80 PCB as they are also ALPS-compatible.

The Leaf 60 PCB is only compatible for the same board, right? It won't be cross-compatible with any other similar boards?

Zuology · « **Reply #4 on:** Thu, 02 May 2019, 15:06:30 »

Hello - somewhat unrelated, but was interested in having another plate cut for my Orange 80. Any chance you could share file or consider doing plate retro plate run , also?

Vigrith · « **Reply #5 on:** Thu, 02 May 2019, 17:00:47 »

Very happy to see this, Senter. I'm having a couple Time plates cut for me as we spoke about over email a few months ago, this makes my life quite a bit easier.

Submitted for a Time PCB (may add another when the MOQ has been reached) as well as an extra for my Leaf 60 since I forgot to get one during GB and I probably shouldn't gamble on that.

crd · « **Reply #6 on:** Fri, 03 May 2019, 09:00:57 »

Will these be compatible with QMK?

merlin64 · « **Reply #7 on:** Fri, 03 May 2019, 12:51:48 »

@Senter

I would be happy to help get all these boards into qmk_firmware/QMK Configurator for both the native QMK pcb and boot mapper ones. If you're interested please shoot me a message =).

vtachkov · « **Reply #8 on:** Fri, 03 May 2019, 13:06:23 »

Could you also do the plates as well?

wholypantalones · « **Reply #9 on:** Fri, 03 May 2019, 13:28:17 »

Quote from: vtachkov on Fri, 03 May 2019, 13:06:23

Could you also do the plates as well?

Even making the plate files available would be handy.

Zuology · « **Reply #10 on:** Fri, 03 May 2019, 14:38:14 »

Quote from: wholypantalones on Fri, 03 May 2019, 13:28:17

Quote from: vtachkov on Fri, 03 May 2019, 13:06:23
Could you also do the plates as well?

Even making the plate files available would be handy.

Yeah I'd be happy to foot the cost and take on the process myself if plate files were made available. Just didn't know which option Senter preferred, if at all, they are his work.

lovetree · « **Reply #11 on:** Fri, 03 May 2019, 22:37:33 »

What a great timing! I just needed a PCB for Time TKL because my previous one had broken.
Thanks Senter for doing this!

kk3659 · « **Reply #12 on:** Sat, 04 May 2019, 09:01:29 »

I am very grateful to you for this ic.
It was something I really wanted and I will wait even if it takes a long time!

senter · « **Reply #13 on:** Sat, 04 May 2019, 12:54:12 »

Quote from: LightningXI on Thu, 02 May 2019, 14:30:36

Fantastic to hear! I might be in for a Leaf 80 PCB as they are also ALPS-compatible.

The Leaf 60 PCB is only compatible for the same board, right? It won't be cross-compatible with any other similar boards?

Leaf 60 PCB is not compatible with any known boards.

senter · « **Reply #14 on:** Sat, 04 May 2019, 12:55:21 »

Quote from: Zuology on Thu, 02 May 2019, 15:06:30

Hello - somewhat unrelated, but was interested in having another plate cut for my Orange 80. Any chance you could share file or consider doing plate retro plate run , also?

Pm me your email address then I'll send you the files. The plate files of ALL Fox Lab designs are available for sharing.

senter · « **Reply #15 on:** Sat, 04 May 2019, 12:59:09 »

Quote from: merlin64 on Fri, 03 May 2019, 12:51:48

@Senter

I would be happy to help get all these boards into qmk_firmware/QMK Configurator for both the native QMK pcb and boot mapper ones. If you're interested please shoot me a message =).

Really appreciate it. I'll get in contact with you later.

wholypantalones · « **Reply #16 on:** Sat, 04 May 2019, 20:26:37 »

Quote from: senter on Sat, 04 May 2019, 12:55:21

Quote from: Zuology on Thu, 02 May 2019, 15:06:30
Hello - somewhat unrelated, but was interested in having another plate cut for my Orange 80. Any chance you could share file or consider doing plate retro plate run , also?

Pm me your email address then I'll send you the files. The plate files of ALL Fox Lab designs are available for sharing.

Share them here so everyone doesn't have to email you?

Jinnnxxu · « **Reply #17 on:** Sat, 04 May 2019, 21:51:28 »

GL！

Puddsy · « **Reply #18 on:** Sat, 04 May 2019, 22:04:15 »

don't personally have a need for this since i unfortunately don't have a foxlab board but i would support more people doing stuff like this

Bizpit · « **Reply #19 on:** Thu, 09 May 2019, 09:53:55 »

Looks good. My Orange75 PCB died and I didn't get an extra; hopefully this goes through so I can get two!

ArchDill · « **Reply #20 on:** Thu, 09 May 2019, 09:56:04 »

Would love the option to get plates too!

Zuology · « **Reply #21 on:** Thu, 09 May 2019, 11:35:07 »

Quote from: ArchDill on Thu, 09 May 2019, 09:56:04

Would love the option to get plates too!

I was sent the files for Orange 80 plates if anyone would like them, you can PM me if you don't want to bother Senter

moonmembrane · « **Reply #22 on:** Sat, 11 May 2019, 07:56:48 »

I'd like another pcb or two for my Orange75

InvidiousIgnoramus · « **Reply #23 on:** Mon, 13 May 2019, 16:01:07 »

I actually need a new pcb for my Orange Pad. It just stopped working one day, and I haven't been able to get it to work since.

0sirisTV · « **Reply #24 on:** Mon, 13 May 2019, 17:08:26 »

Bought an Orange 75 second hand and would love to have a backup pcb and possibly switch over to a brass plate if you ever plan on running plates/hardware as well.

resonantarchitect · « **Reply #25 on:** Tue, 28 May 2019, 07:08:40 »

In for 1 Orange75 PCB. WOuld definitely be in for an OrangePad PCB as well if they were offered.

Also after plates for both Orange75 & OrangePad.

Thanks so much for setting this up for the current PCBs! Been having trouble finding Orange75 pcbs in the wild.

ramblinrose · « **Reply #26 on:** Tue, 28 May 2019, 12:44:04 »

Did anyone get the orange 75 plate files already?

notice · « **Reply #27 on:** Wed, 05 June 2019, 04:08:25 »

My orange80 pcb died. I think it is the usb connector that was damaged by one of the custom usb cable you can buy on massdrop.

I am going to try to repair it but I could use a new one just in case I fail.

0sirisTV · « **Reply #28 on:** Fri, 28 June 2019, 12:55:24 »

Any updates on this? Would definitely want 2 Orange 75 pbcs and 2 Leaf 60 pcbs.

Sent from my Pixel 2 XL using Tapatalk

ilikerustoo · « **Reply #29 on:** Sun, 11 August 2019, 10:36:09 »

Would definitely want one or two universal PCBs for the leaf60

SingSong · « **Reply #30 on:** Tue, 13 August 2019, 01:05:44 »

If ever the Fox Lab Orange 75 gets rerun, I'm in. Missing out on getting that in the green color is one of the few keyboard regrets I've ever had.

Bizpit · « **Reply #31 on:** Sat, 05 October 2019, 04:49:56 »

Any news on how close each PCB is to the MOQ for a re-run?

HWHobby · « **Reply #32 on:** Mon, 14 October 2019, 00:55:52 »

Filled out the form for a couple of Orange75 PCBs. My Orange75 had a mishap with the USB port getting broken off, would gladly buy a replacement and a spare!

McFlufferSocks · « **Reply #33 on:** Tue, 17 March 2020, 09:11:36 »

Is this still open ?

Eddie_Caps · « **Reply #34 on:** Fri, 10 April 2020, 21:29:28 »

How close to MOQ is the Orange 75 PCB?

noideawhatsgoing · « **Reply #35 on:** Sat, 11 April 2020, 16:01:53 »

[Deleted]

ddnomad · « **Reply #36 on:** Sun, 12 April 2020, 20:29:19 »

Hey [mention]senter [/mention]

Any chance this is still active? I’d love to have 2 solderable PCBs for my Leaf60.

Gave up on my personal data filling out the form. Do hope it’s not in vain

Would really appreciate any update, whether it’s good or bad news!

ddnomad · « **Reply #37 on:** Mon, 27 April 2020, 20:22:30 »

[mention]senter [/mention]

Would appreciate any answer to the above

PigeonsLikeBread · « **Reply #38 on:** Fri, 05 June 2020, 09:55:38 »

Any updates on this? I am messaging people on Reddit to see if they are interested in joining for an extra PCB.

yicaoyimu · « **Reply #39 on:** Fri, 05 June 2020, 10:16:11 »

My Leaf 60 PCB is dead and I really need this to happen. Filled out the IC.

ddnomad · « **Reply #40 on:** Fri, 05 June 2020, 12:40:40 »

[mention]senter [/mention] seems to be not too keen on answering sadly

Puddsy · « **Reply #41 on:** Fri, 05 June 2020, 13:59:02 »

Quote from: ddnomad on Fri, 05 June 2020, 12:40:40

[mention]senter [/mention] seems to be not too keen on answering sadly

my sir the mention thing you're doing does nothing

ddnomad · « **Reply #42 on:** Fri, 05 June 2020, 14:21:57 »

Quote from: Puddsy on Fri, 05 June 2020, 13:59:02

Quote from: ddnomad on Fri, 05 June 2020, 12:40:40
[mention]senter [/mention] seems to be not too keen on answering sadly

my sir the mention thing you're doing does nothing

Lol, what do I even hope for?

paulgali · « **Reply #43 on:** Sun, 07 June 2020, 04:33:55 »

I do hope for a solder pcb for the leaf. The DXF file is public, but only the ansi one. Is it possible to get the WKL plate files, since I would like to try and print a plate for myself?

spyruf · « **Reply #44 on:** Sun, 07 June 2020, 19:41:29 »

Quote from: merlin64 on Fri, 03 May 2019, 12:51:48

@Senter

I would be happy to help get all these boards into qmk_firmware/QMK Configurator for both the native QMK pcb and boot mapper ones. If you're interested please shoot me a message =).

Any update on this? really hoping to use QMK with the original PCBs.

Arithmetics · « **Reply #45 on:** Sun, 07 June 2020, 20:33:11 »

can we get key 65 on the list also? woudl love to buy a backup

spyruf · « **Reply #46 on:** Mon, 08 June 2020, 00:59:24 »

I ported the Leaf 80 to QMK just FYI if that helps anyone. Right now it isn't pushed/merged yet but I'll post a comment when I do that this week.
Also I only added ANSI support right now, no ISO or tsangan.

ddnomad · « **Reply #47 on:** Wed, 17 June 2020, 16:24:34 »

Bump

okfish · « **Reply #48 on:** Sat, 27 June 2020, 02:02:17 »

Would love to see Key65 added to the list.

kiandelmundo · « **Reply #49 on:** Thu, 02 July 2020, 01:21:01 »

Does senter still respond? last time I saw a response was from someone complaining in the key65 GB page. tried messaging here and on his other pages and got nothing.

News:

Author Topic: [IC] Fox Lab PCBs reproduction (Read 18402 times)