Author Topic: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )  (Read 248139 times)

0 Members and 1 Guest are viewing this topic.

Offline cyyz

  • Posts: 45
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #750 on: Fri, 20 September 2019, 22:49:52 »
Edit-figured it out
« Last Edit: Sat, 21 September 2019, 11:13:11 by cyyz »

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #751 on: Sat, 21 September 2019, 04:34:36 »
So I'm gonna be building up my E6.5 between today & tomorrow, but have a few questions. I want to use the gasket mount, but have heard of some gasket mounted boards not working with GMK screw-in stabilizers. Is that the case with this board or will I be fine using them? I do have a set of Cherry clip in PCB mount stabilizers, but would much prefer to use the screw in ones if possible. Also I am planning on using MK Ultra plate & case foams with this build. Will the plate foam interfere with the gasket at all? I figure that is not as big as an issue as the stabilizers since I can just trim the edges of the foam back to allow room for the gasket if need be, or even just drop the plate foam & go with the sorbothane strut mod. Anyways, any info from anybody who has built theirs already with the gasket mounting would be highly appreciated!

Offline Auxo

  • Formerly CJD_Anthony
  • Posts: 719
  • Location: US
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #752 on: Sat, 21 September 2019, 04:46:13 »
So I'm gonna be building up my E6.5 between today & tomorrow, but have a few questions. I want to use the gasket mount, but have heard of some gasket mounted boards not working with GMK screw-in stabilizers. Is that the case with this board or will I be fine using them? I do have a set of Cherry clip in PCB mount stabilizers, but would much prefer to use the screw in ones if possible. Also I am planning on using MK Ultra plate & case foams with this build. Will the plate foam interfere with the gasket at all? I figure that is not as big as an issue as the stabilizers since I can just trim the edges of the foam back to allow room for the gasket if need be, or even just drop the plate foam & go with the sorbothane strut mod. Anyways, any info from anybody who has built theirs already with the gasket mounting would be highly appreciated!

I used GMK screw in stabs and the gasket works perfectly fine, not sure about how the mk ultra plate and case foam would affect it though.
UNREALFORCE TKL | KMAC Happy | LSJ Ares | LZ CLS h | NIX Sofia | Noxary X60 | OTD 356 Mini | PFU Limited HHKB Pro 2 (Black) | PFU Limited HHKB Pro 2 Type-S | PFU Limited HHKB JP Type-S | SINGA x TGR Unikorn | TGR 60% | Weaston & nachie GSKT-00 |
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice
Collection: Salamander PC, Keycult No1(OG) Salamander TKL, M60A, THE60, Jane V2, LZ MP, LZ GH V2, KC 1/60, OTD 456GT. Kepler, Think 6.5 Brass, Think 6.5 PC, T60, The Raine, F77, E7-V1 SE
Topre Realforce 87U 55g | Corsair K70 w/ MX Browns | Unicomp Ultra Classic
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #753 on: Sat, 21 September 2019, 04:58:04 »
So I'm gonna be building up my E6.5 between today & tomorrow, but have a few questions. I want to use the gasket mount, but have heard of some gasket mounted boards not working with GMK screw-in stabilizers. Is that the case with this board or will I be fine using them? I do have a set of Cherry clip in PCB mount stabilizers, but would much prefer to use the screw in ones if possible. Also I am planning on using MK Ultra plate & case foams with this build. Will the plate foam interfere with the gasket at all? I figure that is not as big as an issue as the stabilizers since I can just trim the edges of the foam back to allow room for the gasket if need be, or even just drop the plate foam & go with the sorbothane strut mod. Anyways, any info from anybody who has built theirs already with the gasket mounting would be highly appreciated!

I used GMK screw in stabs and the gasket works perfectly fine, not sure about how the mk ultra plate and case foam would affect it though.

Awesome news there, thanks for the heads up! Yeah not sure about the foam yet myself, but I got options there. Cut the foam back or just use the sorbothane strut mod so I don't gotta worry about anything being by the edges of the plate.

Offline _ODIN_

  • Posts: 629
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #754 on: Sat, 21 September 2019, 09:53:40 »
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
226764-0226766-1226768-2226770-3226772-4226774-5226776-6
« Last Edit: Sat, 21 September 2019, 09:56:44 by _ODIN_ »

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #755 on: Sat, 21 September 2019, 10:58:40 »
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

So clean, love it man! I didn't know you could get these without the arrow blocker, I went for the WKL case, but I really like it without any blockers too!

Offline _ODIN_

  • Posts: 629
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #756 on: Sat, 21 September 2019, 14:02:30 »
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

So clean, love it man! I didn't know you could get these without the arrow blocker, I went for the WKL case, but I really like it without any blockers too!
Thank you!
I really like the symmetry of the 1.5/1.5/7/1.5/1.5 bottom row.

Gesendet von meinem H8416 mit Tapatalk


Offline bball2

  • Posts: 418
Re: E6.5 - 65% custom keyboard (Start shipping )
« Reply #757 on: Sat, 21 September 2019, 19:50:37 »
To my understanding, if you're using the gasket, you do not secure it to the top piece. The gasket should kinda friction fit the plate and pcb combo into the case.

For the error message you're getting, that means that the .json file you're using is meant for https://kbfirmware.com/ not qmk config.

Thanks, kbfirmware did the trick!

Also I removed the screws attaching the plate to the top half and didn't make a difference, so I'm assuming that's the proper way to install it if you're using the gasket.

PS. For anyone who is having trouble flashing with the qmk toolbox, you have to press and hold the button on the backside of the pcb for three seconds before the keyboard is recognized as an HID device. Then you can flash using the compiled hex file generated from kbdfirmware.

Here's a pic of my completed build:





Polycarb version - red half plate + wathet / dark red badge
T1 tactile switches
EnjoyPBT extended w/ Torll / Icono
« Last Edit: Sat, 21 September 2019, 20:07:45 by bball2 »

Offline JubJubCity

  • Posts: 356
  • Location: Bay Area
Re: E6.5 - 65% custom keyboard (Start shipping )
« Reply #758 on: Sat, 21 September 2019, 19:58:30 »
To my understanding, if you're using the gasket, you do not secure it to the top piece. The gasket should kinda friction fit the plate and pcb combo into the case.

For the error message you're getting, that means that the .json file you're using is meant for https://kbfirmware.com/ not qmk config.

Thanks, kbfirmware did the trick!

PS. For anyone who is having trouble flashing with the qmk toolbox, you have to press and hold the button on the backside of the pcb for three seconds before the keyboard is recognized as an HID device.
Sweet thanks for the info, just paid my invoice looking forward to building this.

Offline cattharsis

  • Posts: 18
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #759 on: Sat, 21 September 2019, 20:23:13 »

Then you can flash using the compiled hex file generated from kbdfirmware.


just FYI, you dont have to use the hexfile from kbdfirmware if you dont want to. Theres support for E6.5 now on config.qmk.fm.

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #760 on: Sat, 21 September 2019, 20:24:04 »
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

So clean, love it man! I didn't know you could get these without the arrow blocker, I went for the WKL case, but I really like it without any blockers too!
Thank you!
I really like the symmetry of the 1.5/1.5/7/1.5/1.5 bottom row.

Gesendet von meinem H8416 mit Tapatalk

I agree, I have the same bottom row setup on my RedscarfII+ ver.c & think it not only looks better than the setup using a 6.25u spacebar, but feels better too!

Offline foo4542

  • Posts: 22
  • Location: Earth
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #761 on: Sun, 22 September 2019, 03:36:18 »
Another sick board!
226833-0
« Last Edit: Sun, 22 September 2019, 03:44:27 by foo4542 »

Offline wowja

  • Posts: 3
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #762 on: Sun, 22 September 2019, 16:09:44 »
Man, so jealous. I want a PC case with PC plate. I missed this GB and the Think6.5!

Offline excluisve

  • * Maker
  • Thread Starter
  • Posts: 982
  • Location: Where? i will be there .
  • Making & Thinking.
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
« Reply #763 on: Wed, 25 September 2019, 08:53:25 »
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends


Offline jacky

  • Posts: 444
  • Location: UK
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
« Reply #764 on: Wed, 25 September 2019, 09:02:16 »
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends

Great job again ! :thumb:

Offline ever9415

  • Posts: 113
  • Location: Republic of Korea
    • EVER STORY
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
« Reply #765 on: Wed, 25 September 2019, 09:09:44 »
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends


I received it safely.
Thank you for sending me well. ^^


« Last Edit: Wed, 25 September 2019, 09:11:34 by ever9415 »

Offline ptiede

  • Posts: 267
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
« Reply #766 on: Wed, 25 September 2019, 14:32:56 »
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends

You did a great job! There were so many boards this round.

Offline bball2

  • Posts: 418
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
« Reply #767 on: Wed, 25 September 2019, 16:23:54 »
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends


A little late, but great communication and great quality product! No complaints from me  :thumb:

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED)
« Reply #768 on: Wed, 25 September 2019, 16:29:21 »
Thanks for everyone ,Gb finished .

sorry for the delay, exclusive will do it better next time ,hope my keyboard become you exclusively one !!

Let us meet next time

Thanks again to all orders and my friends


Thanks again for the smooth GB & extra communication you did with me to make sure you had my address right! The delay is really nothing to apologize about IMO, it was a very small one & was done to ensure the quality of the product. Nothing wrong with that at all! Honestly this was one of the smoothest, worry free GBs I've participated in. Looking forward to your future designs & would not hesitate to buy another board through you! :thumb:

Offline LuiKang

  • Posts: 59
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #769 on: Sat, 28 September 2019, 06:28:04 »
Type test on alu top and pc bottom

Offline koenoe

  • Posts: 122
    • My YouTube channel
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #770 on: Sat, 28 September 2019, 08:15:34 »
Thank you very much for this smooth Group Buy. It's been a good one and I'm very happy with the board. Also I'd like to highlight the unboxing process, which was an amazing experience! I felt like a little kid unboxing a birthday or Christmas present. Thanks again, and can't wait to join your next one :-)




Offline mrpetrov

  • Posts: 641
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #771 on: Sat, 28 September 2019, 08:41:40 »
I have the PC e6.5 with rose gold rear and badge. Would anyone be interested in swapping their alu case for a pc case?

Offline itunesacc

  • Posts: 9
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #772 on: Sat, 28 September 2019, 11:48:19 »
Everyone! If you willing to sell this keyboard, plz PM me!!!

Offline victorpre

  • Posts: 124
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #773 on: Sat, 28 September 2019, 14:08:07 »
Any extras available? :)

Sent from my Pixel 2 XL using Tapatalk


Offline click clack jack

  • Posts: 76
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #774 on: Sat, 28 September 2019, 14:18:17 »
Exclusive is a TOP TIER gb runner!

The box, the ano qual, the orginization, etc etc!


Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #775 on: Sat, 28 September 2019, 14:47:56 »
Exclusive is a TOP TIER gb runner!

The box, the ano qual, the orginization, etc etc!

Show Image



Looks great OP & gives me a little preview on mine! I went with the dark red WKL alum. case to pair with Jamon as well. However I went with e-white accents (nameplate & weight) cause I really like the look of Jamon with both white & black accents with the white spacebar. Other than that I plan on doing the same layout so we're pretty much E6.5 bros!

Offline cldskt

  • Posts: 253
  • Location: Rabbithole
  • Wallet and hobby aren't friends
E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #776 on: Sun, 29 September 2019, 09:48:28 »
« Last Edit: Sun, 29 September 2019, 09:59:46 by cldskt »


"Addiction is buying the things that I don't need with the money I don't have." - me
"Spending $500 on your first custom is justified." - also me

Offline excluisve

  • * Maker
  • Thread Starter
  • Posts: 982
  • Location: Where? i will be there .
  • Making & Thinking.
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #777 on: Mon, 30 September 2019, 08:39:42 »
Sort some pic and video sharing here :


https://imgur.com/a/P9tWgmH

Thanks to those orders :











Have much video so that not all post
« Last Edit: Mon, 30 September 2019, 08:46:41 by excluisve »

Offline excluisve

  • * Maker
  • Thread Starter
  • Posts: 982
  • Location: Where? i will be there .
  • Making & Thinking.
Re: E6.5 - 65% custom keyboard (Last shipping Group )
« Reply #778 on: Mon, 30 September 2019, 08:40:23 »
Built my E-White E6.5 yesterday. I am impressed.

Switches: Burgundy Pandas (Krytox 203; 60g springs)
Keycaps: SA Vilebloom
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Thanks to sharing those great pic !

Offline excluisve

  • * Maker
  • Thread Starter
  • Posts: 982
  • Location: Where? i will be there .
  • Making & Thinking.
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #779 on: Mon, 30 September 2019, 08:40:43 »
Show Image


Full album: https://imgur.com/a/7DwPZcd

Thanks to sharing those great pic !
« Last Edit: Mon, 30 September 2019, 08:44:37 by excluisve »

Offline Mcnos

  • Posts: 1279
    • GMK Fuyu
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #780 on: Mon, 30 September 2019, 09:05:40 »



Offline Fallakin

  • Posts: 22
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #781 on: Tue, 01 October 2019, 08:29:34 »
Invite link is dead, got a new one?

(Used to be in there and mistakenly left the server cleaning up what I'm joined to in Discord)

Offline Vov

  • Posts: 25
  • Location: cali
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #782 on: Tue, 01 October 2019, 12:40:20 »
Invite link is dead, got a new one?

(Used to be in there and mistakenly left the server cleaning up what I'm joined to in Discord)

https://discord.gg/CvwbHd
1.2 og | 2.0 add | Fallacy | Alpha65 | Ojou | Orion v2.5 | Kei | FMJ Poker | GSKT-00 | Unikorn 2.1

Offline Fallakin

  • Posts: 22
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #783 on: Tue, 01 October 2019, 12:44:34 »
Thank you!

Offline BIG_BUCKNUT

  • Posts: 16
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #784 on: Tue, 01 October 2019, 12:52:47 »
If anyone has an extra nameplate they're willing to part with please let me know. Looking for gold or rose gold.

Offline Tekniqs

  • Posts: 184
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #785 on: Fri, 04 October 2019, 21:47:08 »
anyone have an extra name plate? blank or the 'normal' exclusive name.

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #786 on: Sun, 06 October 2019, 14:18:49 »
227717-0

Finally got around to building mine!

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #787 on: Sat, 12 October 2019, 13:49:37 »
Finally got VIA working with mine today thanks to the always awesome LightningXI! Now that I got it going I figured it would be a good ideal to post the links to the latest version of VIA that supports the E6.5 & the .hex file that allows VIA to recognize your E6.5 here for others who couldn't find them like me.

E6.5 VIA.hex - https://cdn.discordapp.com/attachments/555079607250976798/615866051988815872/exclusive_e65_VIA.hex
Latest version of VIA - https://github.com/olivia/via-config/releases/latest

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #788 on: Thu, 17 October 2019, 01:44:14 »
Are the details on how to QMK configure this anywhere? What is the microcontroller for example.
VE.A 67g Zealios | GH60 MX Clears |

Offline neon_tom

  • Posts: 263
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #789 on: Thu, 17 October 2019, 06:36:54 »
Are the details on how to QMK configure this anywhere? What is the microcontroller for example.


https://github.com/qmk/qmk_firmware/tree/master/keyboards/exclusive/e65

Everything you need should be in here.


Sent from my iPhone using Tapatalk

Offline Tyson

  • Posts: 881
  • Location: Texas
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #790 on: Thu, 17 October 2019, 13:14:06 »
I somehow misplaced my screws for the nameplate and the screws for the top mount option, is it possible to buy the screws again?

Offline elmo

  • Posts: 412
  • Location: Hamburg, Germany
  • Hello I like keyboards
    • Elmo's keyboards
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #791 on: Tue, 19 November 2019, 11:39:05 »
symbiosis finally came and I finished my build. It came out absolutely gorgeous ;D


« Last Edit: Tue, 19 November 2019, 11:42:02 by elmo »

Offline PocketAces

  • Posts: 96
  • Location: Miami, FL
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #792 on: Sat, 07 December 2019, 08:16:17 »
Yeah soo that white and rose gold is probably my dream board. Unfortunately I didn’t even know about this hobby when this went into group buy lol.

Any word on another round? Or maybe extras from this round?


Orrrrr if you want to sell me your white/rose gold, DM me!


Sent from my iPhone using Tapatalk

Offline Sic_Alpha

  • Posts: 138
  • Location: Texas
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #793 on: Sat, 07 December 2019, 13:15:35 »
Yeah soo that white and rose gold is probably my dream board. Unfortunately I didn’t even know about this hobby when this went into group buy lol.

Any word on another round? Or maybe extras from this round?


Orrrrr if you want to sell me your white/rose gold, DM me!


Sent from my iPhone using Tapatalk

His GB for E8.5 was just extended and should still be open.  Would be quick about it if you want it though.

https://geekhack.org/index.php?topic=103520.0;topicseen

Offline Egobean

  • Posts: 53
  • Location: Pasadena Texas
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #794 on: Sun, 29 December 2019, 17:31:49 »
me personally im only into the 65% keyboards i wish i got in this one when it happened.

Offline Egobean

  • Posts: 53
  • Location: Pasadena Texas
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #795 on: Sun, 16 February 2020, 17:13:27 »
if anyone is willing to sell their e6.5 keyboard pm me please :)

Offline ElKapitain

  • Posts: 11
  • Location: Canada
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #796 on: Sat, 22 February 2020, 10:39:59 »
I'm also willing to buy one, reach out on reddit if you are interested to sell :) u/C4pitain

Offline excluisve

  • * Maker
  • Thread Starter
  • Posts: 982
  • Location: Where? i will be there .
  • Making & Thinking.
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #797 on: Tue, 17 March 2020, 11:43:57 »

Offline Rob27shred

  • Posts: 1482
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #798 on: Tue, 17 March 2020, 12:03:28 »
http://bit.ly/33rWi8w PCB release

Awesome, thanks for doing a batch of these E! I've been wanting to do a linear build for my E6.5, but really didn't want to desolder my current setup it in it to do so. No more worries now for those of us who didn't order any extra PCBs or plates! Just ordered myself a PCB, PC plate, & fresh gasket. When will PP invoices be going out for these?
« Last Edit: Tue, 24 March 2020, 14:01:24 by Rob27shred »

Offline nephlock

  • Posts: 263
  • Location: Utah
Re: E6.5 - 65% custom keyboard (GROUP BUY FINISHED )
« Reply #799 on: Tue, 17 March 2020, 12:10:33 »
http://bit.ly/33rWi8w PCB release
Do these PCBs also include the the side RGB lights the originals had?