Author Topic: [WTS] Dolch Pac Keyboard w/ Leeku PCB, 3D Printed Roadkit [WTB] FC660m Cases (Read 68742 times)

quochung1989 · « **Reply #50 on:** Wed, 08 February 2017, 20:25:39 »

YGPM. Please check!

MandrewDavis · « **Reply #51 on:** Thu, 09 February 2017, 15:20:20 »

Need ur broken PCBs.

MandrewDavis · « **Reply #52 on:** Mon, 20 February 2017, 19:53:19 »

Bump!

MandrewDavis · « **Reply #53 on:** Thu, 23 February 2017, 13:41:46 »

Bumping the steel plate!

catawalks · « **Reply #54 on:** Sat, 25 February 2017, 07:24:12 »

Quote from: MandrewDavis on Fri, 26 August 2016, 22:57:23

• Homemade AEK plate. This was cut from an AEK and will fit any standard size 60 case. It is not recommended for use with any floating key designs but is not even noticeable with a high profile case. Asking $5??? Can include the original set of stabilizers free of charge. A 60% set of ultrasonic cleaned AEK II caps with a chipped spacebar can be added for an additional $20. First time using jigsaw Pending

It'll take that homemade AEK 60% plate w/stabs if the pending sale falls through.

MandrewDavis · « **Reply #55 on:** Mon, 06 March 2017, 23:52:26 »

Bump for Apple Desktop Bus KB keycaps.

MandrewDavis · « **Reply #56 on:** Wed, 08 March 2017, 10:26:06 »

MandrewDavis · « **Reply #57 on:** Sat, 11 March 2017, 13:04:36 »

Bump!

ninjadoc · « **Reply #58 on:** Sun, 12 March 2017, 10:23:53 »

Quote from: MandrewDavis on Sun, 28 August 2016, 19:42:51

Sold:
•105x R2 67g Zealios $87
•101x White Alps harvested from Monterey 104 $30
•One full set of OG Dolch Keycaps $80
•Orange, Low-profile Z-Case $20
•Chicony 5981 $55
•Vintage Blue Stems $20
•Massdrop Infinity Steel Plate $25

These prices included shipping and fees within the CONUS.

Thank you for leaving the sold prices up.
I wish everyone would - it makes it easier to judge what you can sell similar items for.

MandrewDavis · « **Reply #59 on:** Sat, 01 April 2017, 00:08:32 »

Bump!

Quote from: ninjadoc on Sun, 12 March 2017, 10:23:53

Quote from: MandrewDavis on Sun, 28 August 2016, 19:42:51
Sold:
•105x R2 67g Zealios $87
•101x White Alps harvested from Monterey 104 $30
•One full set of OG Dolch Keycaps $80
•Orange, Low-profile Z-Case $20
•Chicony 5981 $55
•Vintage Blue Stems $20
•Massdrop Infinity Steel Plate $25

These prices included shipping and fees within the CONUS.

Thank you for leaving the sold prices up.
I wish everyone would - it makes it easier to judge what you can sell similar items for.

Some of these items were sold on a bit of the low side, but I figured it could be helpful.

MandrewDavis · « **Reply #60 on:** Sat, 01 April 2017, 22:04:45 »

Bump, Price Dropped!

MandrewDavis · « **Reply #61 on:** Mon, 03 April 2017, 18:01:23 »

Added Vintage Blue Stems for sale, Price Dropped on Alpine Winter

MandrewDavis · « **Reply #62 on:** Tue, 04 April 2017, 18:47:17 »

Bump, price drop, added AEKII caps for sale.

MandrewDavis · « **Reply #63 on:** Wed, 05 April 2017, 21:46:36 »

MandrewDavis · « **Reply #64 on:** Thu, 06 April 2017, 19:58:07 »

Price Drops

MandrewDavis · « **Reply #65 on:** Sat, 08 April 2017, 13:53:45 »

Not dropping the price on Alpine Winter past this

MandrewDavis · « **Reply #66 on:** Sun, 09 April 2017, 18:33:25 »

Daellin · « **Reply #67 on:** Mon, 10 April 2017, 00:04:48 »

Sent a PM.

MandrewDavis · « **Reply #68 on:** Sat, 22 April 2017, 21:55:09 »

Orange Alps for sale!

MandrewDavis · « **Reply #69 on:** Sat, 20 May 2017, 09:05:21 »

GMK Carbon For Sale!

MandrewDavis · « **Reply #70 on:** Sun, 21 May 2017, 15:50:18 »

Price DROP

MandrewDavis · « **Reply #71 on:** Wed, 24 May 2017, 00:10:47 »

Looking for PCB mount vintage blacks.

MandrewDavis · « **Reply #72 on:** Thu, 25 May 2017, 07:17:27 »

MandrewDavis · « **Reply #73 on:** Fri, 26 May 2017, 08:02:10 »

MandrewDavis · « **Reply #74 on:** Thu, 08 June 2017, 15:24:45 »

Leeku 1800 PCB Plz

MandrewDavis · « **Reply #75 on:** Fri, 09 June 2017, 19:27:50 »

Still looking

mech0nly · « **Reply #76 on:** Fri, 09 June 2017, 20:31:55 »

Have you contacted leeku via email? I think he still have some of them.

Sent from my iPhone using Tapatalk

MandrewDavis · « **Reply #77 on:** Fri, 09 June 2017, 20:56:42 »

Quote from: mech0nly on Fri, 09 June 2017, 20:31:55

Have you contacted leeku via email? I think he still have some of them.

I have, and at the time he had no stock. I joined a Leeku 1800 GB in January, but delivery has been continuously postponed, seemingly due to the TX-1800 groupbuy. I expect that contacting Leeku at this point would have a similar completion timeline.

Just posting here in the case someone has an extra on hand, I would have liked to build my Dolch Pac several months ago.

mech0nly · « **Reply #78 on:** Fri, 09 June 2017, 20:58:29 »

Quote from: MandrewDavis on Fri, 09 June 2017, 20:56:42

Quote from: mech0nly on Fri, 09 June 2017, 20:31:55
Have you contacted leeku via email? I think he still have some of them.

I have, and at the time he had no stock. I joined a Leeku 1800 GB in January, but delivery has been continuously postponed, seemingly due to the TX-1800 groupbuy. I expect that contacting Leeku at this point would have a similar completion time.

Just posting here in the case someone has an extra on hand, I would have liked to build my Dolch Pac several months ago.

Ohh i see. Good luck then

MandrewDavis · « **Reply #79 on:** Wed, 14 June 2017, 19:09:12 »

kimbles · « **Reply #80 on:** Wed, 14 June 2017, 19:26:29 »

I purchased an extra Leeku PCB with my TX-CP, think someone in the GB thread said kin is planning on shipping next week. Guess I can check in with you next week to see if there's still interest.

MandrewDavis · « **Reply #81 on:** Fri, 07 July 2017, 08:41:31 »

RK-9000 for sale!

MandrewDavis · « **Reply #82 on:** Sat, 08 July 2017, 17:58:21 »

MandrewDavis · « **Reply #83 on:** Sun, 09 July 2017, 21:13:22 »

Price Drop

MandrewDavis · « **Reply #84 on:** Wed, 12 July 2017, 15:04:45 »

Need TeckKeys Krytox

ReadmeDotTxt · « **Reply #85 on:** Thu, 13 July 2017, 02:05:17 »

pming

MandrewDavis · « **Reply #86 on:** Thu, 13 July 2017, 23:06:57 »

switchnollie · « **Reply #87 on:** Fri, 14 July 2017, 23:56:11 »

You could try this:

http://www.switchtop.com/product/geekhackers-switch-lube

MandrewDavis · « **Reply #88 on:** Sat, 15 July 2017, 00:35:08 »

Quote from: switchnollie on Fri, 14 July 2017, 23:56:11

You could try this:

http://www.switchtop.com/product/geekhackers-switch-lube

Yeah, that would work just as good, I am just being neurotic. Was halfway through building my keyboard before running out of lube. I'm getting irrationally anxious over the keys not being uniform in feel.

I should contact mkawa to see if the krytox distributed through switchTop is the same 206/1506 mix as TechKeys.

Edit: Not the same

MandrewDavis · « **Reply #89 on:** Thu, 20 July 2017, 14:47:15 »

cynviloq · « **Reply #90 on:** Thu, 20 July 2017, 15:39:35 »

Quote from: MandrewDavis on Thu, 20 July 2017, 14:47:15

Bump

If you want 204/1504 - I have kits that you can mix to get the feel you want. Not sure if you're interested but figured I'd drop a note in case since you seem anxious!

MandrewDavis · « **Reply #91 on:** Tue, 25 July 2017, 21:11:07 »

MandrewDavis · « **Reply #92 on:** Thu, 24 August 2017, 21:30:27 »

Added the Zenith and white alps parts for sale.

MandrewDavis · « **Reply #93 on:** Sat, 26 August 2017, 11:02:20 »

MandrewDavis · « **Reply #94 on:** Thu, 31 August 2017, 21:51:28 »

Need Bluefruit EZ key plz

MandrewDavis · « **Reply #95 on:** Sun, 10 September 2017, 18:03:16 »

MandrewDavis · « **Reply #96 on:** Tue, 17 October 2017, 13:47:01 »

MandrewDavis · « **Reply #97 on:** Tue, 28 November 2017, 11:14:49 »

MandrewDavis · « **Reply #98 on:** Thu, 30 November 2017, 15:30:13 »

MandrewDavis · « **Reply #99 on:** Sat, 02 December 2017, 22:01:50 »

News:

Author Topic: [WTS] Dolch Pac Keyboard w/ Leeku PCB, 3D Printed Roadkit [WTB] FC660m Cases (Read 68742 times)