geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: JSaintS on Mon, 29 June 2020, 02:07:02

Title: KAT Hyperfuse - Shipping
Post by: JSaintS on Mon, 29 June 2020, 02:07:02
(https://i.imgur.com/abAdgWg.png)
(https://i.imgur.com/VauJYhI.jpg)
Trifecta - Kits: Alpha | Icon Modifiers | Purple and Teal Icon Accent kits - render by Prkns


Welcome to the KAT Hyperfuse Origins GB!

Starting with the most important stuff:

GB started will be on from June 29th till July 31st.

Vendors
Here is where you want to go depending on your region:
for Europe, MyKeyboard.eu (https://mykeyboard.eu/catalogue/category/group-buys/kat-hyperfuse_304/) - [LIVE];
for the States, Originative (https://www.originativeco.com/products/kat-hyperfuse) - [LIVE];
for China and the rest of Asia, zFrontier: Asian site (https://en.zfrontier.com/products/kat-hyperfuse) - [LIVE] | Chinese site (https://www.zfrontier.com/mch/lOOR70b8Q6zl) - [LIVE].

Keyreative leadtime is currently 6-7 months.

(https://i.postimg.cc/FHc51MRQ/KAThyperfuse-Status200731fin-Yext.png)
Final numbers - thank you all for your support <3

(https://i.imgur.com/kyKlCwc.jpg)
Xeno - Kits: Alpha | Text Modifiers | Teal accent

Prices

MOQ is 54k units, as per usual for KAT. Let's crush it!

↡ Kits\Vendors MyKeyboard (EU) Originative (NA)zFrontier
Unit Count
Alpha
€35
$35
$31
56.75u
Ancient Alpha
€35
$35
$31
56.75u
Modifiers (text)  
€70
$65
$56
105.25u
Modifiers (icons)  
€70
$65
$56
105.25u
Novelties
€32
$32
$29
53.75u
Purple Accent (text)  
€23
$22
$20
36.25u
Purple Accent (icons)  
€23
$22
$20
36.25u
Teal Accent (text)  
€23
$22
$20
36.25u
Teal Accent (icons)  
€23
$22
$20
36.25u
Numpad
€30
$28
$22
39u
Spacebars (Grey)  
€21
$20
$18
32.25u
Spacebars (Purple)  
€27
$25
$22
40.5u
Spacebars (Teal)  
€27
$25
$22
40.5u
ISO  
€13
$12
$9
15u
North
€36
$36
$31
57.5u
South
€34
$32
$30
55.5u
French
€30
$30
$27
48.5u
Colevrak+  
€28
$25
$25
46.5u
CMD (text)  
€14
$15
$13
22.5u
CMD (icons)  
€14
$15
$13
22.5u
40s (text)  
€45
$45
$40
72.5u
40s (icons)  
€45
$45
$40
72.5u
Ortho (text)  
€28
$28
$23
42u
Ortho (icons)  
€28
$28
$23
42u
Ergo  
€50
$50
$46
86.5u




KAT who dis?

All of you should be more or less familiar now with this profile, but for those that are not, here are a couple of things you can check/read:
※ ↠ English link with some images (https://www.zfrontier.com/post/detail/7624) ↞
※ ↠ Chinese link with some more images (https://www.zfrontier.com/post/detail/7625) ↞

If you don't want to go and read, know this: it's higher than GMK, looks like SA whilst being shorter than SA (so, all the pros without the cons) :D
Schematics comparing it to SA and GMK:

※ Schematics comparing it to SA and GMK: ↠
More
(https://i.imgur.com/hvG3wPg.jpg)

※ Picture comparing it to SA: ↠
More
(https://i.imgur.com/Nxcjg9L.jpg)


(https://i.imgur.com/6eCC6il.jpg)
Kyuu - Kits: Alpha | Text Modifiers | Purple accent | Teal accent

(https://i.imgur.com/i5XkZBW.png)
AKI-S - Kits: Alpha | Icon Modifiers | FR kit | Teal accent

Kits

Alphas:
More
Alphas
(https://i.imgur.com/nKOcGNr.png)(https://i.imgur.com/ituRKgS.png)

ISO
(https://i.imgur.com/3oZHh0D.png)

International
(https://i.imgur.com/sgG7IAZ.png)(https://i.imgur.com/aZfpw6B.png)

French kit
(https://i.imgur.com/2fOKn6B.png)

Colevrak
(https://i.imgur.com/WKgWxq4.png)

Modifiers:
More
Modifiers
(https://i.imgur.com/G7AB8j2.png)(https://i.imgur.com/PsoI03M.png)

Accent
(https://i.imgur.com/Urtg4yo.png)(https://i.imgur.com/w0GO4U0.png)
(https://i.imgur.com/KyCG6Yw.png)(https://i.imgur.com/48VPVNt.png)

CMD
(https://i.imgur.com/hwbCWlZ.png)(https://i.imgur.com/Z4GQq7B.png)

40s
(https://i.imgur.com/srxkZ7Z.png)(https://i.imgur.com/FRJtMA8.png)

Ortho
(https://i.imgur.com/vBMv9Kw.png)(https://i.imgur.com/qesXeBv.png)

Ergo
(https://i.imgur.com/i2TQ2L7.png)

Spacebars
(https://i.imgur.com/Cy4A22i.png)
(https://i.imgur.com/M2ClA4Y.png)(https://i.imgur.com/xFCB5Ht.png)

Numpad:
More
Numpad
(https://i.imgur.com/RGvH0HZ.png)

Novelties:
More
Novelties
(https://i.imgur.com/fhU7LZM.jpg)
explanation for the novelties:
More
(https://i.imgur.com/vhFeTkQ.png)


(https://i.imgur.com/oU44nnX.jpg)
KBD19X - Kits: Alpha | Icon Modifiers | Teal accent | Purple accent | Calculus


(https://i.imgur.com/JGIVYzC.jpg)
Odin by MelonKeys - link to the GB below

Artisans

I love artisans and I hope you will love the collabs we have prepared for this set - These will NOT be exclusive to GB participants, everyone is free to enter :)

۞ MelonKeys (https://www.instagram.com/melonkeys.keycaps/) - first on the list is Melonkeys - this will be the very first sale for their new sculpt - Odin. And what a sale, this will be a GB running from July 1st till July 31st The GB is >>LIVE (https://www.melonkeys.com/product-page/odin-the-storm-breaker)<< ;
۞ Alpha Keycaps (https://www.instagram.com/alphakeycaps/?hl=en);
۞ Lividity (https://www.instagram.com/lividitycaps/) - Puppeteer & Observer
More
(https://i.imgur.com/QYzbvKJ.jpg)
;
۞ GSK (https://www.instagram.com/goldenstar_keycap/) - HFO Velities!
More
(https://i.imgur.com/eELVm45.jpg)
;
۞ SodieCaps (https://www.instagram.com/sodiecaps/);
۞ Latrialum (https://www.instagram.com/latrialum/);
۞ TRMK (https://www.instagram.com/trmkcaps/); and
۞ Bad Habit Caps (https://www.instagram.com/bad.habit.caps/).


(https://i.imgur.com/6rFqx6X.jpg)
KBD19X - Kits: Alpha | Icon Modifiers | Teal accent | Purple accent | Calculus



Thanks

I wanted to thank Bunny and Sherryton for allowing me to work on the set! Big thanks to Konstantin for his help on the legends and the icons - you're the man! Finally, big thank to fatboycarney for helping me and listening to me rambling all the time and Manzel and 2Moons for the awesome renders!

Want to support?

You can copy this in your signature:
Code: [Select]
[url=https://geekhack.org/index.php?topic=105660.0][img]https://i.imgur.com/abAdgWg.png[/img][/url](https://i.imgur.com/abAdgWg.png)




Renders

(https://i.imgur.com/8kqnC9T.jpg)(https://i.imgur.com/D7MTpOg.jpg)

(https://i.imgur.com/i5XkZBW.png)(https://i.imgur.com/jTLTJsj.jpg)

(https://i.imgur.com/xHkY6hA.jpg)(https://i.imgur.com/kyKlCwc.jpg)

(https://i.imgur.com/vMv6O0o.jpg)(https://i.imgur.com/6eCC6il.jpg)

(https://i.imgur.com/6rFqx6X.jpg)(https://i.imgur.com/oU44nnX.jpg)

(https://i.imgur.com/uFvAOb2.jpg)(https://i.imgur.com/9DJu1wp.jpg)

(https://i.imgur.com/VauJYhI.jpg)(https://i.imgur.com/4vKYcK6.jpg)

(https://i.imgur.com/1VQ136k.jpg)











Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Mon, 29 June 2020, 02:12:38
Samples:
(https://i.imgur.com/oA3zGCc.png)
KAT Samples (left) next to SA keys (right)

Day 1 numbers:
(https://i.imgur.com/eWmd5TH.png)

2-weeks numbers:
(https://i.postimg.cc/wBYzxDNW/KAThyperfuse-Status200716.png)

Final numbers:
(https://i.postimg.cc/FHc51MRQ/KAThyperfuse-Status200731fin-Yext.png)
Title: Re: [GB] KAT Hyperfuse
Post by: HoffmanMyster on Tue, 30 June 2020, 14:47:41
Approved! :thumb:
Title: Re: [GB] KAT Hyperfuse
Post by: konstantin on Tue, 30 June 2020, 14:56:46
GLWGB!
Title: Re: [GB] KAT Hyperfuse
Post by: I LOVE TACOS OMG on Tue, 30 June 2020, 16:00:18
Been lurking for a couple years, finally committing.  Just wondering if a deskmat will be complimented to this set possibly?
Title: Re: [GB] KAT Hyperfuse
Post by: dMarvb on Tue, 30 June 2020, 16:18:58
Yes
Title: Re: [GB] KAT Hyperfuse
Post by: Runningtarrens on Tue, 30 June 2020, 16:43:10
Ordered.
that acient alphas are hot!
Title: Re: [GB] KAT Hyperfuse
Post by: fatboycarney on Wed, 01 July 2020, 22:05:24
GLWGB JSaintS great work!!!
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Thu, 02 July 2020, 03:14:55
Hello Everyone!

Numbers for Day 1 are in and I'm super happy to see we're already half way through MOQ!

(https://i.imgur.com/eWmd5TH.png)

The GB for the Melonkeys x Hyperfuse is also live:

>> Join Here (https://www.melonkeys.com/product-page/odin-the-storm-breaker) <<

(https://i.imgur.com/JGIVYzC.jpg)

Thanks a lot for your support <3



(https://i.imgur.com/vPO4x16.png) (https://www.instagram.com/jsaints.mk/)      (https://i.imgur.com/QQoUKS8.png) (https://discord.gg/scmc4R9)
Title: Re: [GB] KAT Hyperfuse
Post by: nathanchere on Thu, 02 July 2020, 05:41:59
I wasn't going to do it but you sold me on those alien alphas.
I still ordered from zfrontier though, feels a lot less risky than giving any money to originative again.
Title: Re: [GB] KAT Hyperfuse
Post by: konstantin on Thu, 02 July 2020, 06:46:43
Great progress!
Title: Re: [GB] KAT Hyperfuse
Post by: glowcloud on Thu, 02 July 2020, 20:06:59
Having this be KAT and have so many different sets is amazing but also dangerous, I ordered so much. Can't wait for next year!
Title: Re: [GB] KAT Hyperfuse
Post by: duck pauper on Sat, 04 July 2020, 19:25:45
GB fulfillment date is beyond PayPal’s 120 claim/dispute window. What true protections does the buyer have from production errors that plagued other KAT sets other than the word of venders that they’ll provide replacements? Can we get reissued invoices prior to the 120 day mark?
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Sun, 05 July 2020, 15:59:11
GB fulfillment date is beyond PayPal’s 120 claim/dispute window. What true protections does the buyer have from production errors that plagued other KAT sets other than the word of venders that they’ll provide replacements? Can we get reissued invoices prior to the 120 day mark?

Unfortunately I do not think vendors would do this as they would need to refund each invoice and reissue it. This would mean risking the buyer not to pay again and most importantly, this would incur additional fees since PP do not refund PP fees when a refund is made by a vendor.
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Sun, 05 July 2020, 16:04:53
I hope everybody had an amazing weekend! I will have a new graph soon for you but I'm still waiting for the latest numbers after the weekend (we are sitting at a little over 70% MOQ as of right now).

In the meantime, I am happy to show you guys the result of the TRMK x Hyperfuse collab:

(https://i.imgur.com/uM7NSSI.jpg)


۞ When: Friday, July 10th, 9.00 PM ICT
۞ Quantity: 10 pcs
۞ Price: $50 + shipping

Last but not least, the GB for the Melonkeys x Hyperfuse is also live:

>> Join Here (https://www.melonkeys.com/product-page/odin-the-storm-breaker) <<

(https://i.imgur.com/JGIVYzC.jpg)

Thanks a lot for your support <3



(https://i.imgur.com/vPO4x16.png) (https://www.instagram.com/jsaints.mk/)      (https://i.imgur.com/QQoUKS8.png) (https://discord.gg/scmc4R9)

[/center]
Title: Re: [GB] KAT Hyperfuse
Post by: Diggidy on Sun, 05 July 2020, 19:35:09
What is the Alice-style board with knobs?

Really nice set, GLWGB.
Title: Re: [GB] KAT Hyperfuse
Post by: konstantin on Mon, 06 July 2020, 06:28:08
GB fulfillment date is beyond PayPal’s 120 claim/dispute window. What true protections does the buyer have from production errors that plagued other KAT sets other than the word of venders that they’ll provide replacements?

None. Just like with any other GB.
Title: Re: [GB] KAT Hyperfuse
Post by: stein3 on Mon, 06 July 2020, 18:27:57
It's finally here!

Do you have any info/timelines for the remaining artisan collabs?
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Thu, 09 July 2020, 14:06:13
Hello Everyone!

I hope you all hada wonderful week, hang tight, we're almost Friday night!

quick update for those wondering about the numbers:
(https://i.imgur.com/06qLCv3.png)

Also, for anyone keeping an eye out for the artisans, the TRMK raffle will be live tomorrow - you won't want to miss it :) I'll post the link here and it will of course be posted on my IG and Discord as well as TRMK's IG!

(https://i.imgur.com/wSzfUo7.jpg)

Thanks a lot for your support <3



(https://i.imgur.com/vPO4x16.png) (https://www.instagram.com/jsaints.mk/)      (https://i.imgur.com/QQoUKS8.png) (https://discord.gg/scmc4R9)
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Fri, 10 July 2020, 12:19:27
The TRMK x Hyperfuse raffle is live!

(https://i.imgur.com/pxWc1xq.jpg)

>> Raffle Form << (http://forms.gle/Xyy9khC3d3fA2N2CA)

Don't miss out!
Title: Re: [GB] KAT Hyperfuse - Lividity x Hyperfuse Raffle LIVE
Post by: JSaintS on Tue, 14 July 2020, 08:07:32
Hello everyone!!!

I hope you are all doing well! The Lividity x Hyperfuse raffle is open (for everyone, even if you didn't join the keyset GB!)

(https://i.imgur.com/hK2Z0pJ.jpg)


>> Enter here << (https://forms.gle/XbY1Ag5LbyRuKKGq8)



PS: All the keys for the TRMK x Hyperfuse raffle have been shipped!
Title: Re: [GB] KAT Hyperfuse - MOQ MET - more artisans collabs!
Post by: JSaintS on Thu, 16 July 2020, 14:08:39
Hello Everyone!

Quick update to say that MOQ as been met, and we still have 2 weeks to go till the GB ends! Thank you so much for your support!

I know a lot of you guys were waiting for samples and I finally have something to show you - Here are the KAT Samples next to some SA Hyperfuse keys:
(https://i.imgur.com/oA3zGCc.png)
red arrows indicate SA keys



on another not, I am pretty sure you guys saw these already but here are the next artisan collabs:

BadHabbitCaps x Hyperfuse - Royal Saint (dropping tomorrow, July 17th @9.00 AM PT!)

(https://i.imgur.com/v8ZhvyA.jpg)(https://i.imgur.com/47nWzMG.jpg)
(https://i.imgur.com/wYKXcEf.jpg)(https://i.imgur.com/jBnSaOb.jpg)

Latrialum x Hyperfuse (raffle: TBD)
(https://i.imgur.com/lFnWqe5.jpg)
(https://i.imgur.com/Okv27KB.jpg)(https://i.imgur.com/tbdMLUf.jpg)

Last but not least, Archetype confirmed they will be making some HF goodness :D



(https://i.imgur.com/vPO4x16.png) (https://www.instagram.com/jsaints.mk/)      (https://i.imgur.com/QQoUKS8.png) (https://discord.gg/scmc4R9)
Title: Re: [GB] KAT Hyperfuse
Post by: dvorcol on Thu, 16 July 2020, 21:55:59
The MOQ of 54,000 units has been met,
so it is certain all kits will be made!


(https://i.postimg.cc/wBYzxDNW/KAThyperfuse-Status200716.png)

More
(https://i.postimg.cc/fb7NVkjM/KAThyperfuse-Progress200716.png)
<-- progress
Title: Re: [GB] KAT Hyperfuse
Post by: fatboycarney on Fri, 17 July 2020, 00:51:51
The MOQ of 54,000 units has been met,
so it is certain all kits will be made!


Show Image
(https://i.postimg.cc/wBYzxDNW/KAThyperfuse-Status200716.png)


Show Image
(https://i.postimg.cc/fb7NVkjM/KAThyperfuse-Progress200716.png)


Congrats JSaintS!!! Amazing work!  :thumb:
Title: Re: [GB] KAT Hyperfuse
Post by: konstantin on Fri, 17 July 2020, 01:30:01
Great work, and also colors look spot on!
Title: Re: [GB] KAT Hyperfuse
Post by: TurboGrinder on Sat, 18 July 2020, 09:10:31
Glad to see this hit MOQ! Now we wait. Those samples are on point too.

Also just wanted to throw this out there for anyone that likes artisans: Brewcaps has their Pain sculpt in a Hyperfuse Teal color on their site.
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Sat, 18 July 2020, 09:14:17
Glad to see this hit MOQ! Now we wait. Those samples are on point too.

Also just wanted to throw this out there for anyone that likes artisans: Brewcaps has their Pain sculpt in a Hyperfuse Teal color on their site.

You're the best! Just got one based off your comment, didn't know Brewcaps made one in HF colors hehe
Title: Re: [GB] KAT Hyperfuse
Post by: Ulliam on Sat, 18 July 2020, 14:26:21
Hey man, that render at the top there was done by Prkns, I think you missed him from the credits (:
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Sat, 18 July 2020, 14:43:14
Hey man, that render at the top there was done by Prkns, I think you missed him from the credits (:

Ah, didn’t know that. I got the render through the board designer ^^

I’ll add him to the credits for sure :-)
Title: Re: [GB] KAT Hyperfuse
Post by: nathanchere on Sun, 19 July 2020, 07:19:07
I guess I missed the artisan raffle, where was it posted?
Title: Re: [GB] KAT Hyperfuse
Post by: JSaintS on Sun, 19 July 2020, 08:36:57
I guess I missed the artisan raffle, where was it posted?

Raffles were posted on IG, Geekhack and on Discord :)
Title: Re: [GB] KAT Hyperfuse - MOQ Met!
Post by: nevillesidhu on Sun, 19 July 2020, 14:38:54
So I got in on the Bear keyboard gb, and wondering if the ergo has every key I need. So I can just buy alphas, mods, and ergo and be covered?
Title: Re: [GB] KAT Hyperfuse - MOQ Met!
Post by: maxmeister on Tue, 21 July 2020, 16:33:28
Don't know how I missed it in the IC thread but now I see the chevrons and the wormhole icon. Explanation picture for the novelties was really good idea! Loving the set more and more. Will join the group buy once salary arrives!

Sent from my POCOPHONE F1 using Tapatalk

Title: Re: [GB] KAT Hyperfuse - MOQ Met!
Post by: JSaintS on Thu, 23 July 2020, 13:50:33
Good morning/evening/night everyone!

I hope you and your loved ones are all safe and sound!

I quickly wanted to mention that the GSK x Hyperfuse Raffle will be on Sunday :D Keep an eye out!

(https://i.imgur.com/eELVm45.jpg)

Velities are not the only keys that will be available soon - I saw the Salvador and it is gorgeous! Definitely check the next Alpha sale to get a chance to win that!

Last, but not least, we are now 7 days away from the end of the GB and we are at 124% of the MOQ - don't forget to join the GB if you don't want to pay the /r/mm and live in regret!

Thank you all for your support <3
Title: Re: [GB] KAT Hyperfuse - MOQ Met!
Post by: dvorcol on Thu, 23 July 2020, 16:52:28
(https://i.postimg.cc/QMmVmyvQ/KAThyperfuse-Status200723.png)

More
(https://i.postimg.cc/j5j2FhrG/KAThyperfuse-Progress200723.png)
<-- progress
Title: Re: [GB] KAT Hyperfuse - MOQ Met!
Post by: JSaintS on Sun, 26 July 2020, 10:26:57
The GSK x Hyperfuse raffle is LIVE!


(https://i.imgur.com/eELVm45.jpg)

Raffle form (https://docs.google.com/forms/d/e/1FAIpQLSfWkZ0MqBnsTbPt9tLuhfFtltqWajCWfehAxcmyhr8DK13K4g/viewform)

Good luck everyone!
Title: Re: [GB] KAT Hyperfuse - MOQ Met! - GB end date modification (NA)
Post by: JSaintS on Wed, 29 July 2020, 03:16:43
Hello everyone!

You might have seen it on IG but Originative posted a story to say Hyperfuse's GB ended on Thursday (as opposed to Friday as I originally planned). I checked with them and they confirmed my suspicion, they will be away from internet starting on Friday and it is easier for them to close the GB on Thursday. As such, please don't wait till Friday to get your orders in, that will not work (at least in NA).

GB End dates:

* NA: Thursday July 30th
* EU: Friday July 31st
* AS: Friday July 31st


Reminder: We are now at 152% MOQ - all kits will be produced, don't hesitate to join :D

Have a great day!
Title: Re: [GB] KAT Hyperfuse - MOQ Met - LAST DAY!
Post by: JSaintS on Fri, 31 July 2020, 04:40:13
Hello everyone!

I hope you are all doing well :D

This is the last day for you to join KAT Hyperfuse, make sure you don't miss it and place your orders in today :D

(https://i.imgur.com/6rFqx6X.jpg)
Title: Re: [GB] KAT Hyperfuse - MOQ Met - LAST DAY!
Post by: dvorcol on Sun, 02 August 2020, 18:36:14
Final with extras

(https://i.postimg.cc/FHc51MRQ/KAThyperfuse-Status200731fin-Yext.png)

(https://i.postimg.cc/s2rFWTQG/KAThyperfuse-Progress200731fin-Yext.png)
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: LASERman on Mon, 03 August 2020, 06:23:11
Just realized I missed numpad kit when placed my order   :'( :'( :'(
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: JSaintS on Mon, 03 August 2020, 06:24:39
Just realized I missed numpad kit when placed my order   :'( :'( :'(

I can't say for sure but try and contact the store in which you ordered and ask for them to add that to your order ;)
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: LASERman on Mon, 03 August 2020, 07:14:27
Just realized I missed numpad kit when placed my order   :'( :'( :'(
I can't say for sure but try and contact the store in which you ordered and ask for them to add that to your order ;)
Thanks, thats wht I did - MyKeyboard can't do it since GB closed but they added note and hopefully I'll have chance to buy when orders are fulfilled - nice of them.
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: gecruz on Mon, 09 November 2020, 02:11:24
Does anyone know if Oco will have extras for sale?
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: JSaintS on Mon, 09 November 2020, 02:24:50
Does anyone know if Oco will have extras for sale?

Answer is yes ;)
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: LASERman Projects on Wed, 11 November 2020, 10:11:39
Sorry of this was answered / obvious already but what material this set will be made from? ABS or PBT? Is it double-shot or dye-syb?
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: dmatx1 on Wed, 11 November 2020, 10:15:31
Sorry of this was answered / obvious already but what material this set will be made from? ABS or PBT? Is it double-shot or dye-syb?

It is PBT dyesub like all KAT and KAM sets.
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: Zanhana on Sun, 22 November 2020, 09:29:21
Does anyone know if Oco will have extras for sale?

Answer is yes ;)

do you know when extras are expected to run? also, what is the best way to stay informed of when extras will be made available?
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: JSaintS on Sun, 22 November 2020, 17:18:23
do you know when extras are expected to run? also, what is the best way to stay informed of when extras will be made available?

They'll probably announced that on their IG and via their site, so keep an eye on both :)
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: gex on Sat, 23 January 2021, 10:40:55
GB started will be on from June 29th till July 31st.

Keyreative leadtime is currently 6-7 months.

now that it’s almost 6 months since the gb closed do we know the eta?
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: Eoen on Sat, 23 January 2021, 10:55:51
GB started will be on from June 29th till July 31st.

Keyreative leadtime is currently 6-7 months.

now that it’s almost 6 months since the gb closed do we know the eta?

Keyreative put out a statement a few weeks ago saying that they were completely revamping their production and building new machines to start doing everything in house. Gonna have to be patient for this one likely not going to ship for a while.
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: gex on Sat, 23 January 2021, 11:01:20
Keyreative put out a statement a few weeks ago saying that they were completely revamping their production and building new machines to start doing everything in house. Gonna have to be patient for this one likely not going to ship for a while.

i missed that but thanks for the update! is it related to the milkshake fail?
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: nathanchere on Sun, 14 March 2021, 03:18:38
The lack of any official updates on this given the time frames is a little disturbing
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: JSaintS on Sun, 14 March 2021, 04:51:41
The lack of any official updates on this given the time frames is a little disturbing

Happy Sunday!

Sorry you feel that way, I'm partisan of "no post if I don't have anything to say" but feel free to join discord.

As I said, no real update as of right now, we are still waiting for production to kick off:

Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: nathanchere on Sun, 14 March 2021, 10:59:36
That's still some news at least, thanks :D
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: PittaMan on Thu, 01 April 2021, 09:28:22
There's a discord?
Title: Re: [GB Closed] KAT Hyperfuse - MOQ Met
Post by: JSaintS on Thu, 01 April 2021, 09:31:09
There's a discord?

Yup :) Feel free to join us here: https://discord.gg/9eZQcaW
Title: Re: [In Production] KAT Hyperfuse
Post by: JSaintS on Sun, 15 August 2021, 15:12:51
Hello everyone!

Long time no speak - sorry for the long silence, there has been a couple of small updates on my discord, but nothing major up until now, so here is the situation:

KAT Hyperfuse is in production and everything should be done by the end of the month. Given recent issues (small or not), I know some KAT designers have asked for sample keysets during production to be able to check everything; I was amongst those designers. I received the kits a couple of days ago and have finally been able to spend some time with the keyset - here are a couple of pictures:

(https://i.imgur.com/z6e2xIT.jpg)(https://i.imgur.com/fJWXmUB.jpg)
(https://i.imgur.com/sIFZIg0.jpg)(https://i.imgur.com/A65hSBn.jpg)
(https://i.imgur.com/50hFLSI.jpg)(https://i.imgur.com/KaLc5AJ.jpg)

I am no Ninjapirate or Oziiiobsessions (these two are insane) but I hope you'll like the pictures! I have sent my feedback to zFrontier/Keyreative to make sure everything is A-OK when it ships to everyone, but here are a couple of key points:

Cons:

* the missing spacebars could be explained by their desire to ship "the bare minimum", I did have all spacebar size on hand, from different kits, and what I got, given the smaller containers and what not, might just have been for me to see the different size but not the exact kits that were sold - as said above, I signaled those oddities, but wouldn't be surprised if it was just so I would have "just enough" on hand to try everything.

Pros:

I will keep you guys updated with anything I hear back from zFrontier/Keyreative, and hope Hyperfuse will be in your hands soon :)

Take care!
Title: Re: [In Production] KAT Hyperfuse
Post by: Gondolindrim on Mon, 16 August 2021, 01:38:19
Missed on this due to lack of funds -- will there be extras?
Title: Re: [In Production] KAT Hyperfuse
Post by: JSaintS on Mon, 16 August 2021, 02:38:40
Missed on this due to lack of funds -- will there be extras?

Yup :D all vendors bought extras (as is customary I think ^^), you might have to be quick depending on how/when your local vendor decides to hold the sale, but there will be extras  :D
Title: Re: [In Production] KAT Hyperfuse
Post by: Eoen on Mon, 16 August 2021, 09:08:31
Set came out great! We're in the home stretch!!
Title: Re: [In Production] KAT Hyperfuse
Post by: JSaintS on Tue, 17 August 2021, 07:15:15
Hello everyone!

As promised, I am back with a quick update - as a reminder, these were my mains issues with the production samples I got:

Cons:
  • There were a couple of odd things with the alpha kits: the Latin one was missing the scooped F and J keys and the Ancient had 2 scooped F and J (on top of the barred F and J) - also, none of them had a 6.25u spacebar (I wouldn't be alarmed, the kits were shipped to me in smaller containers than they usually are, and I'm 99% sure this is why there was no spacebar key in the alpha kits, it has nonethless been signaled)*
  • The spacebar kit I received (purple) was missing the 6.25u and 7u spacebar*
  • I noticed a very slight misalignment on some of the keys on the F-row (didn't notice it on the other keys, but I'll keep checking those as well and update my feedback to zFrontier/Keyreative if need be), we're talking about .5mm at the very worst of it, but this was flagged and I asked them to correct the shot on all kits and reproduce the keys if need be.

* the missing spacebars could be explained by their desire to ship "the bare minimum", I did have all spacebar size on hand, from different kits, and what I got, given the smaller containers and what not, might just have been for me to see the different size but not the exact kits that were sold - as said above, I signaled those oddities, but wouldn't be surprised if it was just so I would have "just enough" on hand to try everything.

I got a reply from zFrontier today saying:


I'll be back as soon as I get the icon modifiers, hopefully really soon!

Take care!
Title: Re: [In Production] KAT Hyperfuse
Post by: nathanchere on Tue, 17 August 2021, 10:35:59
Fantastic news. It's nice to finally hear some positive news about a KAT set's production progress for a change.
[edit] to clarify, I'm referring to the complications in various other KAT runs, not being sarcastic about this one :D
Title: Re: [In Production] KAT Hyperfuse
Post by: nathanchere on Tue, 07 September 2021, 06:57:05
Just got a shipping notification from zFrontier... it's finally coming! :D
Title: Re: [In Production] KAT Hyperfuse
Post by: Havattack on Wed, 08 September 2021, 12:58:28
If anyone that got the "teal accent" icon set doesn't need their ISO enter key, i'd love to buy it off you. -thanks
Title: Re: [In Production] KAT Hyperfuse
Post by: Soketto on Fri, 10 September 2021, 06:23:25
Mine arrived today from zfrontier. Love it. :D
On an ErgoDash.
Title: Re: [In Production] KAT Hyperfuse
Post by: LordOwen on Fri, 10 September 2021, 07:26:48
Mine arrived... but it's missing the "C" alpha. Gotta wait for a new one >.<
Title: Re: [In Production] KAT Hyperfuse
Post by: TurboGrinder on Fri, 10 September 2021, 07:40:29
Got a shipping notification on the 7th for this, but it hasn't moved since FedEx got it due to "operational delays."

Mine arrived today from zfrontier. Love it. :D
On an ErgoDash.

Just wondering, did your alpha kit come with scooped homing keys or only the barred keys?
Title: Re: [In Production] KAT Hyperfuse
Post by: Soketto on Fri, 10 September 2021, 07:54:57
Got a shipping notification on the 7th for this, but it hasn't moved since FedEx got it due to "operational delays."

Mine arrived today from zfrontier. Love it. :D
On an ErgoDash.

Just wondering, did your alpha kit come with scooped homing keys or only the barred keys?

It came with both scooped and bar F/J keys
Title: [Shipping to vendors] KAT Hyperfuse
Post by: JSaintS on Fri, 10 September 2021, 08:12:04
Mine arrived today from zfrontier. Love it. :D
On an ErgoDash.

Glad to see the kits arriving! Share pictures guys :D I want to see more hehe

Mine arrived... but it's missing the "C" alpha. Gotta wait for a new one >.<

Wait what?! During the sample phase I did tell them to carefully check the kits and that I wanted to ship them exactly what had been sold in the kits, they confirmed that packages will strictly follow the kit pictures... did you already contact zFrontier about this?


Just wondering, did your alpha kit come with scooped homing keys or only the barred keys?

Could I ask why that question? Did you see that issue somewhere?
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: LordOwen on Fri, 10 September 2021, 08:25:55
Wait what?! During the sample phase I did tell them to carefully check the kits and that I wanted to ship them exactly what had been sold in the kits, they confirmed that packages will strictly follow the kit pictures... did you already contact zFrontier about this?

I emailed them, yeah, but no telling when I'm going to hear back because it's Friday evening here in Tokyo. Everything else I ordered looked fine, just missing that one key :/
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: TurboGrinder on Fri, 10 September 2021, 09:18:13
Got a shipping notification on the 7th for this, but it hasn't moved since FedEx got it due to "operational delays."

Just wondering, did your alpha kit come with scooped homing keys or only the barred keys?

It came with both scooped and bar F/J keys

 :thumb:


Just wondering, did your alpha kit come with scooped homing keys or only the barred keys?

Could I ask why that question? Did you see that issue somewhere?


No, I didn't see it being an issue anywhere. For whatever reason I was thinking that the scoops were replacing the bars, but looking back at the IC thread just a minute ago you had the flats changed to scoops. I'll blame it on having a senior moment even though I don't qualify as a senior yet. Sorry if I made it seem like there could be a potential issue.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: AlanDracula on Fri, 10 September 2021, 21:47:36
just got my set, looks great but i recently started liking 1800 boards and made the mistake of not getting numpad... any idea on extras?
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: TurboGrinder on Mon, 13 September 2021, 15:10:28
Got this a little while ago. Just wanted to verify that there were no kitting changes for the 40s or ortho kits listed in the first post before I email zFrontier about it. There's some missing keys in a few of the kits if the kitting images are correct.

My Ortho Icon kit is missing the r3 control.
More
(https://i.imgur.com/HyDLl4V.jpg)


And my 40s kit is missing the 6.25u spacebar.
More
(https://i.imgur.com/Q90LPvu.jpg)


And I have the same missing bars as the sample kitting bar kits from a few weeks ago - both the teal and purple bars are missing the 6.25u and 7u spacebars.
More
(https://i.imgur.com/4aAw94D.jpg) (https://i.imgur.com/wZrc3pX.jpg)


Other than that everything else is spot on, including getting homing bars and scoops in both alpha kits. Legend and text alignment is pretty decent. There's a key or two here or there that aren't aligned perfectly, but on the whole they're not too bad.

The only other issue I saw was the 40s 1.25u icon function key was scraped up a bit on one corner, as well as the thin edge of the stepped wormhole novelty key.
More
(https://i.imgur.com/k0YtKrr.jpg) (https://i.imgur.com/bP0ld1Y.jpg)


Here's a pic of everything I got for anyone curious about it.
More
(https://i.imgur.com/jSjCSDh.jpg)
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: JSaintS on Mon, 13 September 2021, 16:00:31
Got this a little while ago. Just wanted to verify that there were no kitting changes for the 40s or ortho kits listed in the first post before I email zFrontier about it. There's some missing keys in a few of the kits if the kitting images are correct.

My Ortho Icon kit is missing the r3 control.
More
Show Image
(https://i.imgur.com/HyDLl4V.jpg)

And my 40s kit is missing the 6.25u spacebar.
More
Show Image
(https://i.imgur.com/Q90LPvu.jpg)

And I have the same missing bars as the sample kitting bar kits from a few weeks ago - both the teal and purple bars are missing the 6.25u and 7u spacebars.
More
Show Image
(https://i.imgur.com/4aAw94D.jpg)
Show Image
(https://i.imgur.com/wZrc3pX.jpg)

Other than that everything else is spot on, including getting homing bars and scoops in both alpha kits. Legend and text alignment is pretty decent. There's a key or two here or there that aren't aligned perfectly, but on the whole they're not too bad.

The only other issue I saw was the 40s 1.25u icon function key was scraped up a bit on one corner, as well as the thin edge of the stepped wormhole novelty key.
More
Show Image
(https://i.imgur.com/k0YtKrr.jpg)
Show Image
(https://i.imgur.com/bP0ld1Y.jpg)

Here's a pic of everything I got for anyone curious about it.
More
Show Image
(https://i.imgur.com/jSjCSDh.jpg)

That is not normal... Kits haven't been changed, they were locked when I asked the quote and didn't change since then. On top of that, the accent kits did not have 6u spacebars... The missing spacebars from the kits I got were due to Keyreative packing everything they had on hand at the time to ship as much as they could for me to check the kits - I did mention it in my feedback and they guaranteed that kits would contain everything that was included in the kit images... Those accent kits were supposed to have a 6.25 and a 7u spacebar.

I will send an email to zFrontier as well, please keep me/us updated once you get a reply from them!
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: TurboGrinder on Mon, 13 September 2021, 16:32:23
That is not normal... Kits haven't been changed, they were locked when I asked the quote and didn't change since then. On top of that, the accent kits did not have 6u spacebars... The missing spacebars from the kits I got were due to Keyreative packing everything they had on hand at the time to ship as much as they could for me to check the kits - I did mention it in my feedback and they guaranteed that kits would contain everything that was included in the kit images... Those accent kits were supposed to have a 6.25 and a 7u spacebar.

I will send an email to zFrontier as well, please keep me/us updated once you get a reply from them!

Ok, thanks for the confirmation. Just to add, my accent kits (not the bar kits) - both purple and teal - came with 6.25u and 7u bars and no 6u bars. Those two kits were correct when I checked them against the kitting pics, and I did double check that the included bars were 6.25u and 7u.

Only the purple and teal spacebar kits had the 6u bars in them, but were missing the 6.25u and 7u spacebars that were supposed to be included. Not that it's a huge deal since I got the accent kits that have those bars, but still..

I just got done writing an email to zFrontier. I'll post an update when I hear back.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: TurboGrinder on Tue, 14 September 2021, 08:20:34
Update: I got an email back from zFrontier while I was sleeping last night. I was actually somewhat surprised to get one so soon based on previous dealings with their support, so good on them for that.

Here's what they replied to me:
Quote
Hi there

Thank you for reaching out to us!
We will send you the replacements and keep you updated on this email.
Since Keyreative is moving these days so it will take some time for them to send the kits to us
Thanks for your understanding

Best
Cici

In the email I sent I told them about the missing keys and asked about getting replacements. I also mentioned the two keys that were scraped up as a formality so they were aware of it and could potentially pass along the information to Keyreative. I don't actually know if they'll be sending those along with the missing keys or not, but I'm not too worried about that as the scratches shouldn't be terribly noticeable when mounted on a board.

Might not see these for a bit, but that's good news that they'll get them sent out eventually. It's too bad that they didn't include them in the fist place, especially since they guaranteed that everything would be included as per the kit images.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: JSaintS on Tue, 14 September 2021, 08:40:10
Update: I got an email back from zFrontier while I was sleeping last night. I was actually somewhat surprised to get one so soon based on previous dealings with their support, so good on them for that.

Here's what they replied to me:
Quote
Hi there

Thank you for reaching out to us!
We will send you the replacements and keep you updated on this email.
Since Keyreative is moving these days so it will take some time for them to send the kits to us
Thanks for your understanding

Best
Cici

In the email I sent I told them about the missing keys and asked about getting replacements. I also mentioned the two keys that were scraped up as a formality so they were aware of it and could potentially pass along the information to Keyreative. I don't actually know if they'll be sending those along with the missing keys or not, but I'm not too worried about that as the scratches shouldn't be terribly noticeable when mounted on a board.

Might not see these for a bit, but that's good news that they'll get them sent out eventually. It's too bad that they didn't include them in the fist place, especially since they guaranteed that everything would be included as per the kit images.

Glad to see you got the same reply I did. I emailed them last night about it, as promised and they did say they will send replacements and they will alert keyreative/check the kits that haven't been shipped out yet for missing keys/damaged keys. This should have taken place before shipping but it's at least a good news for the kits that still need to be sent.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: LordOwen on Tue, 14 September 2021, 22:53:48
I haven't gotten any kind of response from zFrontier yet, I might have to give them a bump in the next day or two if I don't hear anything. I get that the lack of a single key might not be as concerning to them, but it's still annoying as hell (and it's making me reconsider trying to get any extra add-ons from them when those go on sale).
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: edwyn on Sat, 18 September 2021, 18:12:53
Got mine. they are nice but both my 7u coloured spacebars get stuck when pressed.  the all the 6.25u space bars seem find as is the 7u grey bar
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: AlanDracula on Sun, 26 September 2021, 17:50:46
I haven't gotten any kind of response from zFrontier yet, I might have to give them a bump in the next day or two if I don't hear anything. I get that the lack of a single key might not be as concerning to them, but it's still annoying as hell (and it's making me reconsider trying to get any extra add-ons from them when those go on sale).

any word on when those extras drop?
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: Eoen on Sun, 26 September 2021, 21:39:40
I haven't gotten any kind of response from zFrontier yet, I might have to give them a bump in the next day or two if I don't hear anything. I get that the lack of a single key might not be as concerning to them, but it's still annoying as hell (and it's making me reconsider trying to get any extra add-ons from them when those go on sale).

any word on when those extras drop?

Most kits haven't even shipped to proxies from the group buy. Probably going to be a little while.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: nasp on Mon, 22 November 2021, 14:10:50
What is the latest on this? When will proxies begin shipping?
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: JSaintS on Mon, 22 November 2021, 14:14:26
What is the latest on this? When will proxies begin shipping?

As of right now, I have unfortunately no update :(

I sent 9 mails to zFrontier since september 14th, about Hyperfuse and other ongoing projects, and have received a grand total of 0 answers. A couple of weeks ago, Originative mentioned the kits had been shipped to them, but I have not been able to confirm that with zFrontier/Keyreative and haven't been able to get an update regarding the EU orders.

I'll post here and on my discord as soon as I hear back and I'll keep pushing until I get an update :)
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: TurboGrinder on Thu, 09 December 2021, 15:56:34
Got a reply late last night about the missing/damaged keys being shipped out. Just shy of 3 months since I emailed them about it. It'll be nice to get these in.

Quote
Hi there

Sorry for having kept you waiting
Here is the tracking number of the replacements for your reference:LY#########CN
https://www.tracktry.com/couriers/eub-eyoubao

Best
Cici
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: LASERman Projects on Fri, 10 December 2021, 03:50:37
In the meantime in Europe...
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: TurboGrinder on Wed, 26 January 2022, 15:43:55
Got my "replacements" today.. just shy of 7 weeks from when they were shipped. The box that showed up was quite small - 3 x 3.5 x 5 inches. I was scratching my head as to how spacebars could fit in a box that small.

Opened it up to find only the r3 Control keycap that was missing from the Ortho kit. Nothing else.

Besides the control key, I was (and still am) missing a 6.25u spacebar from the 40s Icon kit, two 6.25 and two 7u spacebars from both the teal and purple spacebar kits. I guess they deemed those 5 spacebars to not be an issue on their end. Maybe they figured that since I already had 6.25u gray bars in my alpha kits and 6.25u and 7u bars in the Teal/Purple Icon Accent kits that they didn't need to send the others.

I'm done with groupbuys from zFrontier, and anything KAT/KAM from Keyreative, until they can both manage to not be such a train wreck with all of this. Too bad I'm still waiting on 3 KAT and 2 KAM sets from zFrontier. I'm not looking forward to dealing with them if there are missing or damaged caps in those sets. Shame that they weren't offering refunds for KAT/KAM sets like other vendors have been.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: Adelscott on Thu, 27 January 2022, 04:23:57
For the record, my issue was nicely handled by zFrontier, I received this on 27/12/2021, shipped by FedEx (like the initial shipment) :

(https://i.imgur.com/kMNnMLH.png)

And that's the problem that I declared :

Quote
Hello,

I've noticed some mistakes in my order.

    This legend, from the French kit, should be centered according to the kit visuals, not right aligned.

  image.png

    Spacebars Teal kit is missing 6.25U and 7U spacebars.
    Spacebars Purple kit is missing 6.25U and 7U spacebars.
    Spacebars kit is missing 7U spacebar

 Can you send me the corrected ALT GR key and the 5 spacebars that are missing please ?

Thank you
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: nettik on Thu, 27 January 2022, 05:17:07
Is zFrontier the only proxy that has shipped out this keyset? I haven't heard anything at all from Originative, and the last update on their website is from October 2021.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: neon_tom on Thu, 27 January 2022, 07:45:23
Is zFrontier the only proxy that has shipped out this keyset? I haven't heard anything at all from Originative, and the last update on their website is from October 2021.
I was wondering the same. Sitting here watching people get not only their initial shipments but replacements as well and no word from Originative.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: pixelpusher on Tue, 05 April 2022, 16:23:12
Did you guys get your caps from Originative?  I wonder b/c now they have extras for sale.  Any additional photos of these sets?
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: nathanchere on Mon, 11 April 2022, 08:14:28
Is zFrontier the only proxy that has shipped out this keyset? I haven't heard anything at all from Originative, and the last update on their website is from October 2021.

Classic Originative. Wish I could say I was surprised :(
Can the GB runner offer any insight perhaps?
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: JSaintS on Mon, 11 April 2022, 08:19:50
Is zFrontier the only proxy that has shipped out this keyset? I haven't heard anything at all from Originative, and the last update on their website is from October 2021.

Classic Originative. Wish I could say I was surprised :(
Can the GB runner offer any insight perhaps?

I can unfortunately not, although the message you replied to was from January. From what I know (I have seen this posted on my discord), some of you guys mentioned Originative's owners had a baby, but it looked like they started shipping (from what I heard). They also held/are holding their extra sale right now, which makes me believe all/most orders have shipped, but I could be mistaken.

I can say most of EU orders (unless I'm mistaken or some were missed during preparation) have been shipped.
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: LASERman Projects on Mon, 11 April 2022, 08:29:00
...UK orders are on hold iirc.
Whaaat?
If you refer solely to the banner message on mykeyboard.eu it doesn't affect pre-Brexit orders since I have received GMK set in UK few weeks ago with post-Brexit corrected import procedure.

Edit: just checked my order status and it's changed to "Being processed", hope soon...
Title: Re: [Shipping to vendors] KAT Hyperfuse
Post by: JSaintS on Mon, 11 April 2022, 08:36:05
...UK orders are on hold iirc.
Whaaat?
If you refer solely to the banner message on mykeyboard.eu it doesn't affect pre-Brexit orders since I have received GMK set in UK few weeks ago with post-Brexit corrected import procedure.

Ah yeah that's what I was referring to, my bad, will delete that from my previous post right away, I don't want to spread missinformation, sorry!
Title: Re: KAT Hyperfuse - Shipping
Post by: Randalljai on Wed, 04 January 2023, 22:55:29
Any chance of R2 or extras?
Title: Re: KAT Hyperfuse - Shipping
Post by: dmatx1 on Thu, 05 January 2023, 02:50:46
Any chance of R2 or extras?

MyKeyboard (https://mykeyboard.eu/search/?q=kat+hyperfuse&selected_facets=num_in_stock_exact%3A%5B1+TO+%2A%5D) has most of the kits in stock.
Title: Re: KAT Hyperfuse - Shipping
Post by: kaidaizhao on Sat, 07 January 2023, 01:02:21
Shot in the dark, if anyone has the KAT Hyperfuse Purple Accent Text and Teal Accent text for sale/laying around, please let me know! Would love to put them on my set I got recently!