Morning everybody, here is the nomination thread for keyboard of the month for October!
This will still run for it's projected two weeks, even if it is a little late, and please remember that the board must have been posted somewhere on the forum this month!
Last month's winner was 27's Mech27
(http://i.imgur.com/dsrHHXM.jpg)
Don't forget to +1 your favourites! Entries close on or around the 10th of November!
An oldie but goodie. MrBishop sent moistgunando a case after seeing his handmade keypad. A perfect companion for 60%; wonder if there will be a GB since the QazPad v2 is stagnant... :duckthink:
Show Image
(http://i.cubeupload.com/R5zp0n.jpg)
It just needs more cap symmetry. :-X
Source:
https://geekhack.org/index.php?topic=83799.msg2278278#msg2278278
+1
I nominate Marcel's second version of a custom mechanical typematrix with a handmade woodcase.
Show Image
(http://www.lps-it.fr/pub/ThinkMatrix/case-full.jpg)
thread here:
https://geekhack.org/index.php?topic=76167.0
+1
An oldie but goodie. MrBishop sent moistgunando a case after seeing his handmade keypad. A perfect companion for 60%; wonder if there will be a GB since the QazPad v2 is stagnant... :duckthink:
Show Image
(http://i.cubeupload.com/R5zp0n.jpg)
It just needs more cap symmetry. :-X
Source:
https://geekhack.org/index.php?topic=83799.msg2278278#msg2278278
Might be going for a subtle unicorn vomit look?
+1
More
**** it ill post it again because im genuinely proud
X60 Thread (https://geekhack.org/index.php?topic=82729)
(http://i.imgur.com/j0K8KNE.jpg)
(http://i.imgur.com/ySbUkug.jpg)
My Noxary X60 in Dark Gray with a brushed Stainless Steel, top mounted plate. I lubed the Gateron blacks with stock springs, lubed and clipped the gold plated stabs and stuck some DSA Hyperfuse on there to create my daily driver. It took me about 140 days to get to the current state - from learning how to use CAD software, to getting to milled parts, to final lubing and usage.
More
**** it ill post it again because im genuinely proud
X60 Thread (https://geekhack.org/index.php?topic=82729)
Show Image
(http://i.imgur.com/j0K8KNE.jpg)
Show Image
(http://i.imgur.com/ySbUkug.jpg)
My Noxary X60 in Dark Gray with a brushed Stainless Steel, top mounted plate. I lubed the Gateron blacks with stock springs, lubed and clipped the gold plated stabs and stuck some DSA Hyperfuse on there to create my daily driver. It took me about 140 days to get to the current state - from learning how to use CAD software, to getting to milled parts, to final lubing and usage.
Needs a teal enter key but otherwise
+1
More
**** it ill post it again because im genuinely proud
X60 Thread (https://geekhack.org/index.php?topic=82729)
Show Image
(http://i.imgur.com/j0K8KNE.jpg)
Show Image
(http://i.imgur.com/ySbUkug.jpg)
My Noxary X60 in Dark Gray with a brushed Stainless Steel, top mounted plate. I lubed the Gateron blacks with stock springs, lubed and clipped the gold plated stabs and stuck some DSA Hyperfuse on there to create my daily driver. It took me about 140 days to get to the current state - from learning how to use CAD software, to getting to milled parts, to final lubing and usage.
damn... I really wish I could have gotten in on that buy, it's gorgeous. those DSA caps work really well with it too somehow... +1
An oldie but goodie. MrBishop sent moistgunando a case after seeing his handmade keypad. A perfect companion for 60%; wonder if there will be a GB since the QazPad v2 is stagnant... :duckthink:
Show Image
(http://i.cubeupload.com/R5zp0n.jpg)
It just needs more cap symmetry. :-X
Source:
https://geekhack.org/index.php?topic=83799.msg2278278#msg2278278
+1
More
**** it ill post it again because im genuinely proud
X60 Thread (https://geekhack.org/index.php?topic=82729)
Show Image
(http://i.imgur.com/j0K8KNE.jpg)
Show Image
(http://i.imgur.com/ySbUkug.jpg)
My Noxary X60 in Dark Gray with a brushed Stainless Steel, top mounted plate. I lubed the Gateron blacks with stock springs, lubed and clipped the gold plated stabs and stuck some DSA Hyperfuse on there to create my daily driver. It took me about 140 days to get to the current state - from learning how to use CAD software, to getting to milled parts, to final lubing and usage.
aight you won congrats
An oldie but goodie. MrBishop sent moistgunando a case after seeing his handmade keypad. A perfect companion for 60%; wonder if there will be a GB since the QazPad v2 is stagnant... :duckthink:
Show Image
(http://i.cubeupload.com/R5zp0n.jpg)
It just needs more cap symmetry. :-X
Source:
https://geekhack.org/index.php?topic=83799.msg2278278#msg2278278
+1 because I would totally pair one of these with a 60% board
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
plus one for this one. As expected awesome pictures as well. Great job jokrik.
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1
Beautiful board!!!!
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1
I nominate Marcel's second version of a custom mechanical typematrix with a handmade woodcase.
Show Image
(http://www.lps-it.fr/pub/ThinkMatrix/case-full.jpg)
thread here:
https://geekhack.org/index.php?topic=76167.0
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1 for both orange ones
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1
Is the keyset Skidata?
I nominate Marcel's second version of a custom mechanical typematrix with a handmade woodcase.
Show Image
(http://www.lps-it.fr/pub/ThinkMatrix/case-full.jpg)
thread here:
https://geekhack.org/index.php?topic=76167.0
Also +1 for Marcel's custom TypeMatrix.
Coincidentally both are orange, however, orange color keyboards are never my thing.
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1
Has to be at least one VE.A right?
I nominate adamski07's board:
Show Image
(http://i.imgur.com/nqphNwD.jpg)
Show Image
(https://i.imgur.com/PwgPtaB.jpg)
Would this be for November?
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1
Has to be at least one VE.A right?
I nominate adamski07's board:
Show Image
(http://i.imgur.com/nqphNwD.jpg)
Show Image
(https://i.imgur.com/PwgPtaB.jpg)
+1
More
**** it ill post it again because im genuinely proud
X60 Thread (https://geekhack.org/index.php?topic=82729)
Show Image
(http://i.imgur.com/j0K8KNE.jpg)
Show Image
(http://i.imgur.com/ySbUkug.jpg)
My Noxary X60 in Dark Gray with a brushed Stainless Steel, top mounted plate. I lubed the Gateron blacks with stock springs, lubed and clipped the gold plated stabs and stuck some DSA Hyperfuse on there to create my daily driver. It took me about 140 days to get to the current state - from learning how to use CAD software, to getting to milled parts, to final lubing and usage.
+1
More
**** it ill post it again because im genuinely proud
X60 Thread (https://geekhack.org/index.php?topic=82729)
Show Image
(http://i.imgur.com/j0K8KNE.jpg)
Show Image
(http://i.imgur.com/ySbUkug.jpg)
My Noxary X60 in Dark Gray with a brushed Stainless Steel, top mounted plate. I lubed the Gateron blacks with stock springs, lubed and clipped the gold plated stabs and stuck some DSA Hyperfuse on there to create my daily driver. It took me about 140 days to get to the current state - from learning how to use CAD software, to getting to milled parts, to final lubing and usage.
+1 Great look and details packed into a minimalist design.
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1
Here are some more nominees :rolleyes:
E3E's Alps Mira
Show Image
(http://i.imgur.com/PeiQABo.jpg)
+1000
Here are some more nominees :rolleyes:
E3E's Alps Mira
Show Image
(http://i.imgur.com/PeiQABo.jpg)
+1
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
This reminds me of something... :rolleyes:
(http://i.imgur.com/J6dF04qh.jpg) (http://imgur.com/J6dF04q)
Just kidding of course. :p It's a beautiful board and SkiData+ looks great on it.
Slightly jealous so +1 from me.
I'm nominating Jokrik's Blackbird
Show Image
(https://c1.staticflickr.com/6/5826/30295544320_68b9b0d6b5_z.jpg)
Yowzers
https://geekhack.org/index.php?topic=35864.msg2290416#msg2290416
+1