Bought one this morning! Excited for this GB!Thank you very much. I guarantee that this is absolutely a perfect GB experience :)
Looks great! GLWGBTHKS~~
I've been waiting for this. What's the best way to provide you with the customization vectors?
I'm interested, but it's too hard for me to decide which color...Ah, I have the same choice difficulty... :eek:
shoot an email to OP, hopefully you can help me.
cheers!
I’m all in for this with customised plates. So happy this is happening!Aye...the process is really hard to me...
OP = Original Poster - Thus, yourself.I'm interested, but it's too hard for me to decide which color...Ah, I have the same choice difficulty... :eek:
shoot an email to OP, hopefully you can help me.
cheers!
But in my opinion, the grey system can be referred to as the all-match (with most keycap look good).
So,I recommend : gray top / MAO cover / black weight.
PS:I dont know what OP means... :(
OP = Original Poster - Thus, yourself.I'm interested, but it's too hard for me to decide which color...Ah, I have the same choice difficulty... :eek:
shoot an email to OP, hopefully you can help me.
cheers!
But in my opinion, the grey system can be referred to as the all-match (with most keycap look good).
So,I recommend : gray top / MAO cover / black weight.
PS:I dont know what OP means... :(
Check your email btw.
Furthermore, I don't see any Grey color options in zF site?
The one in your example looks more light green-ish or faded teal rather than grey.
Sent from my SM-G930F using Tapatalk
OP = Original Poster - Thus, yourself.I'm interested, but it's too hard for me to decide which color...Ah, I have the same choice difficulty... :eek:
shoot an email to OP, hopefully you can help me.
cheers!
But in my opinion, the grey system can be referred to as the all-match (with most keycap look good).
So,I recommend : gray top / MAO cover / black weight.
PS:I dont know what OP means... :(
Check your email btw.
Furthermore, I don't see any Grey color options in zF site?
The one in your example looks more light green-ish or faded teal rather than grey.
Sent from my SM-G930F using Tapatalk
ok,take those picturesShow Image(https://i.imgur.com/BmT0CEh.jpg)Show Image(https://i.imgur.com/tliCDsx.jpg)Show Image(https://i.imgur.com/EZHXXCD.jpg)Show Image(https://i.imgur.com/I6cZhz6.jpg)
OP = Original Poster - Thus, yourself.I'm interested, but it's too hard for me to decide which color...Ah, I have the same choice difficulty... :eek:
shoot an email to OP, hopefully you can help me.
cheers!
But in my opinion, the grey system can be referred to as the all-match (with most keycap look good).
So,I recommend : gray top / MAO cover / black weight.
PS:I dont know what OP means... :(
Check your email btw.
Furthermore, I don't see any Grey color options in zF site?
The one in your example looks more light green-ish or faded teal rather than grey.
Sent from my SM-G930F using Tapatalk
ok,take those picturesShow Image(https://i.imgur.com/BmT0CEh.jpg)Show Image(https://i.imgur.com/tliCDsx.jpg)Show Image(https://i.imgur.com/EZHXXCD.jpg)Show Image(https://i.imgur.com/I6cZhz6.jpg)
Thanks :thumb:
so that's a Titanium Grey I suppose?
What would be the best color choices for a rose gold and gold combinations? Or something else that might match the rose gold color?
is it possible to NOT have the "GREY COD67" label on the top right of the top plate?Aye,youcan choose a Nameplate Customization alone,A piece of $7.
Looking over my order, I think I picked the wrong color. Is the blue-gray color supposed to be sky blue or light green? It might help to label the pictures with their colors.Er...bule gray? Gray only a color of titanium gray...
Looking over my order, I think I picked the wrong color. Is the blue-gray color supposed to be sky blue or light green? It might help to label the pictures with their colors.Er...bule gray? Gray only a color of titanium gray...
OP = Original Poster - Thus, yourself.I'm interested, but it's too hard for me to decide which color...Ah, I have the same choice difficulty... :eek:
shoot an email to OP, hopefully you can help me.
cheers!
But in my opinion, the grey system can be referred to as the all-match (with most keycap look good).
So,I recommend : gray top / MAO cover / black weight.
PS:I dont know what OP means... :(
Check your email btw.
Furthermore, I don't see any Grey color options in zF site?
The one in your example looks more light green-ish or faded teal rather than grey.
Sent from my SM-G930F using Tapatalk
ok,take those picturesShow Image(https://i.imgur.com/BmT0CEh.jpg)Show Image(https://i.imgur.com/tliCDsx.jpg)Show Image(https://i.imgur.com/EZHXXCD.jpg)Show Image(https://i.imgur.com/I6cZhz6.jpg)
Looking over my order, I think I picked the wrong color. Is the blue-gray color supposed to be sky blue or light green? It might help to label the pictures with their colors.Er...bule gray? Gray only a color of titanium gray...
Sorry, maybe I worded that wrong. Which color would be the one for the top case in this picture?Show Image(https://cdn.shopify.com/s/files/1/1674/0405/products/Untitled-3_40f7bc33-0442-4e56-9e92-360edbe8897b.png?v=1519534757)
Looking over my order, I think I picked the wrong color. Is the blue-gray color supposed to be sky blue or light green? It might help to label the pictures with their colors.Er...bule gray? Gray only a color of titanium gray...
Sorry, maybe I worded that wrong. Which color would be the one for the top case in this picture?Show Image(https://cdn.shopify.com/s/files/1/1674/0405/products/Untitled-3_40f7bc33-0442-4e56-9e92-360edbe8897b.png?v=1519534757)
This color was actually a result of an accident, the anodize factory made a mistake when doing the titanium finish. Which I admit is a beautiful color and thats why i choose this as a sample. :( however this color is hard to duplicate.
the accurate titanium will be like this https://geekhack.org/index.php?topic=94251.msg2567628#msg2567628
and you can take this as an showcase (still the beautiful accident titanium tho) https://geekhack.org/index.php?topic=92191.msg2567178#msg2567178
aye~OP = Original Poster - Thus, yourself.I'm interested, but it's too hard for me to decide which color...Ah, I have the same choice difficulty... :eek:
shoot an email to OP, hopefully you can help me.
cheers!
But in my opinion, the grey system can be referred to as the all-match (with most keycap look good).
So,I recommend : gray top / MAO cover / black weight.
PS:I dont know what OP means... :(
Check your email btw.
Furthermore, I don't see any Grey color options in zF site?
The one in your example looks more light green-ish or faded teal rather than grey.
Sent from my SM-G930F using Tapatalk
ok,take those picturesShow Image(https://i.imgur.com/BmT0CEh.jpg)Show Image(https://i.imgur.com/tliCDsx.jpg)Show Image(https://i.imgur.com/EZHXXCD.jpg)Show Image(https://i.imgur.com/I6cZhz6.jpg)
Is this a titanium grey top and MAO white bottom?
Do you have a picture to show what a silver top looks like?
Would it be possible to remove the nameplate and not have the cut out from the case?
Would it be possible to remove the nameplate and not have the cut out from the case?Er,I'm sorry to be late.And you mean like this?
ExactlyWould it be possible to remove the nameplate and not have the cut out from the case?Er,I'm sorry to be late.And you mean like this?Show Image(https://i.imgur.com/sNaAbo5.jpg)
Ok,we can customize the non - nameplate version for you :)ExactlyWould it be possible to remove the nameplate and not have the cut out from the case?Er,I'm sorry to be late.And you mean like this?Show Image(https://i.imgur.com/sNaAbo5.jpg)
If its for hhkb style boards what about the arrow icons like we see on Rama's Keyset??Show Image(https://i.imgur.com/RYWfyQs.png)
pls no
i like the current legends a LOT
been looking for a set like this for a long time
Pardon my noob question but what exactly is Micro-Arc Options? Is it a way that the material is wielded? Do you have a pictorial example of it?
How is the customization on the front name plate / back weight done? The current pics look like "GRAY COD 67" is hollowed out while this customization:
https://cdn.shopify.com/s/files/1/1674/0405/products/Untitled-3452345_1024x1024.png?v=1519620171
Looks like white lettering on top of a blue weight; is the white lettering metal inserts? Or some kind of paint on top? Are you limited to what kind of design you can put on the weight plate (ie. simple letters only, or are complex shapes possible?)
I kind of wanted to get something like this done:
https://i.imgur.com/6lUIt7l.jpg
https://i.imgur.com/Hl1k9bP.jpg
And was wondering if it would be possible (the Lakers logo looks fairly complex).
I see the customized weight isn't engraved... are the differing colors made by anodized aluminum inserts? Also, how complex can the customization be?
EDIT: also, I remember brass weights in the IC, is that not an option anymore?
I see the customized weight isn't engraved... are the differing colors made by anodized aluminum inserts? Also, how complex can the customization be?
EDIT: also, I remember brass weights in the IC, is that not an option anymore?
looks like it's just laser printed on there, not an anodized insert
I see the customized weight isn't engraved... are the differing colors made by anodized aluminum inserts? Also, how complex can the customization be?
EDIT: also, I remember brass weights in the IC, is that not an option anymore?
looks like it's just laser printed on there, not an anodized insert
welp im an idiot, i didn't even consider that possibility
but that means custom weight prints will not be anodized and will be silver colored?
Here's a mockup (quick 5 mins in ms paint, would do a nicer mockup with a single color down the line) of what I was thinking of doing:
https://i.imgur.com/jEhKNgO.png
If the warriors logo / nba logo are too complex I could just take them out and stretch out the team name wider.
Planning on gold top, blue bottom, gold weight, and blue plate. :thumb:
Question: If we choose the option of customizing nameplate, will the default nameplate still be given to us (i.e. uncustomized one / "Gray Cod67")?
Question: If we choose the option of customizing nameplate, will the default nameplate still be given to us (i.e. uncustomized one / "Gray Cod67")?
That's correct. That is explained on the additional components page. If you get a customized nameplate or weight, you'll still receive the default nameplate / weight in the color you chose on the main page.
Is there any way I could purchase the customization service without paying the extra shipping fee?
Is there any way I could purchase the customization service without paying the extra shipping fee?
Sure, all you have to do is place the customization service and the COD67 itself within ONE order :)
Is there any way I could purchase the customization service without paying the extra shipping fee?
Sure, all you have to do is place the customization service and the COD67 itself within ONE order :)
Ahh I totally forgot about that. What if you've already placed your order for the base kit?
Are the underglow LEDS fully programmable or just the shown colors?
Is there any way I could purchase the customization service without paying the extra shipping fee?
Sure, all you have to do is place the customization service and the COD67 itself within ONE order :)
Ahh I totally forgot about that. What if you've already placed your order for the base kit?
PM me your order and i will refund you, then you can place a new order
So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?I pmed Airpotter with my order number, he said he would make a note of it. I also emailed alex.lin@zfrontier.com to leave a note on my order just to make sure.
So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?
Is there any way I could purchase the customization service without paying the extra shipping fee?
Sure, all you have to do is place the customization service and the COD67 itself within ONE order :)
Ahh I totally forgot about that. What if you've already placed your order for the base kit?
PM me your order and i will refund you, then you can place a new order
Sent you a PM.
So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?
So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?
Are you sure they can make it that way? If so, I want that too. lol
I think it has not been mentioned in this thread but I assume that Stabilizers are not provided/included in this GB? zFrontier website has not mentioned it as well.
So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?
Shoot an email to support@zfrontier.com with your Order No. included and i will help you with that!So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?
Are you sure they can make it that way? If so, I want that too. lol
Sure you can do that! Just send us an email and I will attach a note to your order!
Is there any way I could purchase the customization service without paying the extra shipping fee?
Sure, all you have to do is place the customization service and the COD67 itself within ONE order :)
Ahh I totally forgot about that. What if you've already placed your order for the base kit?
PM me your order and i will refund you, then you can place a new order
Sent you a PM.
replied
I think it has not been mentioned in this thread but I assume that Stabilizers are not provided/included in this GB? zFrontier website has not mentioned it as well.
check out this link from one of the R1 users http://www.zfrontier.com/post/detail/3922
I believe you will need 2 3u stabs and the kit will not have stabs included. You can find them on taobao tho
I think it has not been mentioned in this thread but I assume that Stabilizers are not provided/included in this GB? zFrontier website has not mentioned it as well.
check out this link from one of the R1 users http://www.zfrontier.com/post/detail/3922
I believe you will need 2 3u stabs and the kit will not have stabs included. You can find them on taobao tho
Do I need 3u stabs if I'm not doing split spacebar? No, right?
I think it has not been mentioned in this thread but I assume that Stabilizers are not provided/included in this GB? zFrontier website has not mentioned it as well.
check out this link from one of the R1 users http://www.zfrontier.com/post/detail/3922
I believe you will need 2 3u stabs and the kit will not have stabs included. You can find them on taobao tho
Do I need 3u stabs if I'm not doing split spacebar? No, right?
nope
So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?
Shoot an email to support@zfrontier.com with your Order No. included and i will help you with that!So I placed my order, but I didn't see anywhere on zfrontier's site to make a note of the nameplate customization. I was hoping to get a plain top without the nameplate spot hollowed out like what was mentioned earlier here. Who would I message/email about that?
Are you sure they can make it that way? If so, I want that too. lol
Sure you can do that! Just send us an email and I will attach a note to your order!
I think it has not been mentioned in this thread but I assume that Stabilizers are not provided/included in this GB? zFrontier website has not mentioned it as well.
check out this link from one of the R1 users http://www.zfrontier.com/post/detail/3922
I believe you will need 2 3u stabs and the kit will not have stabs included. You can find them on taobao tho
Ahhhh... It was late at night and I must have messed things up, I quote the wrong person :(
No dont need 3u stabs if you are not splitting your spacebar
Do I need 3u stabs if I'm not doing split spacebar? No, right?
I'm planning on doing a split spacebar build, are there any pics with that layout or of just the PCB? I chose the default plate (2.25 shift) for my order, just hoping that works! Also interested in hearing if stabilizers are included. I haven't really seen many builds go with 3u spacebars so I'm trying to get a parts list together.
Does the 2,25 left shift support an 1,25 shift for iso? there is one image from taobao that shows it supported?
(Attachment Link)
Hello, big fan of the Warriors :thumb:Like your offensive super fire and defensive mobility.. :D
But there are some bad news, that is, the laser radium carvings can only be carved monochromatic :(, refer to this pictureShow Image(https://i.imgur.com/uH6dOxm.jpg)
And the golden blue is a little chromatic aberration with the yellow and blue of the warriors.
Hello, big fan of the Warriors :thumb:Like your offensive super fire and defensive mobility.. :D
But there are some bad news, that is, the laser radium carvings can only be carved monochromatic :(, refer to this pictureShow Image(https://i.imgur.com/uH6dOxm.jpg)
And the golden blue is a little chromatic aberration with the yellow and blue of the warriors.
For sure, how about something like this?
(Attachment Link)
Hello, big fan of the Warriors :thumb:Like your offensive super fire and defensive mobility.. :D
But there are some bad news, that is, the laser radium carvings can only be carved monochromatic :(, refer to this pictureShow Image(https://i.imgur.com/uH6dOxm.jpg)
And the golden blue is a little chromatic aberration with the yellow and blue of the warriors.
For sure, how about something like this?
(Attachment Link)
Aye~!
That's the effect.
Any replies on my email/concern? :(
Any replies on my email/concern? :(
I'm pretty sure you had to tell them that before the GB ended, could be wrong tho. But they've probably already put in the order. If the first time you asked about not having the cutout was march 30 (your post in here) then you were way late as they GB ended on march 18. I don't know why you'd think you can change your order almost 2 weeks after the end of the GB.
I honestly hope you can get exactly what you want buddy, just tryna level expectations tbh, I'm sure they'll get back soon :)Any replies on my email/concern? :(
I'm pretty sure you had to tell them that before the GB ended, could be wrong tho. But they've probably already put in the order. If the first time you asked about not having the cutout was march 30 (your post in here) then you were way late as they GB ended on march 18. I don't know why you'd think you can change your order almost 2 weeks after the end of the GB.
It was just an inquiry anyways. I was just trying my luck if ever it's still possible. :( anyways, I'm good with whatever I receive.
Any replies on my email/concern? :(
I'm pretty sure you had to tell them that before the GB ended, could be wrong tho. But they've probably already put in the order. If the first time you asked about not having the cutout was march 30 (your post in here) then you were way late as they GB ended on march 18. I don't know why you'd think you can change your order almost 2 weeks after the end of the GB.
It was just an inquiry anyways. I was just trying my luck if ever it's still possible. :( anyways, I'm good with whatever I receive.
The COD67 boards are done CNC machining and are ready to be anodized!
The COD67 boards are done CNC machining and are ready to be anodized!
That probably means it's too late at this point.
QuoteThe COD67 boards are done CNC machining and are ready to be anodized!QuoteThat probably means it's too late at this point.
That's awesome they are done machining already, where did you see that email, I haven't gotten one from them recently.
QuoteThe COD67 boards are done CNC machining and are ready to be anodized!QuoteThat probably means it's too late at this point.
That's awesome they are done machining already, where did you see that email, I haven't gotten one from them recently.
Came for people who ordered customization -- I did order it because I wanted no nameplate, but was refunded saying I didn't need to pay for that. Guess my name stuck around for the email list though. See https://imgur.com/a/NYr1d (https://imgur.com/a/NYr1d)
Any replies on my email/concern? :(
I'm pretty sure you had to tell them that before the GB ended, could be wrong tho. But they've probably already put in the order. If the first time you asked about not having the cutout was march 30 (your post in here) then you were way late as they GB ended on march 18. I don't know why you'd think you can change your order almost 2 weeks after the end of the GB.
It was just an inquiry anyways. I was just trying my luck if ever it's still possible. :( anyways, I'm good with whatever I receive.
If you want you could try sending an email along with your order number to alex.lin@zfrontier.com and 871138172@qq.com -- however according to an email that came out recently:QuoteThe COD67 boards are done CNC machining and are ready to be anodized!
That probably means it's too late at this point.
I guess the aim date is moved? :(Where are you seeing that the date changed?
I guess the aim date is moved? :(Where are you seeing that the date changed?
Sent from my VS996 using Tapatalk
Well lets hope not. He was saying how they were doing really well on timeI guess the aim date is moved? :(Where are you seeing that the date changed?
Sent from my VS996 using Tapatalk
It was just a guess since they haven't given us updates since the last one. Well, end of the month is just around the corner. :))
Well lets hope not. He was saying how they were doing really well on timeI guess the aim date is moved? :(Where are you seeing that the date changed?
Sent from my VS996 using Tapatalk
It was just a guess since they haven't given us updates since the last one. Well, end of the month is just around the corner. :))
Sent from my VS996 using Tapatalk
Yup guys! Airpotter is definitely doing this at light speed! We should expect them in late April or early May!
Be sure to send your design to alex.lin@zfrontier.com and 871138172 if you havent already!
Long shot but I found the board too late to join. If anybody has any interest in flipping their spot so to speak, drop me a PM. Not sure on how but lmk. Hope there's nothing wrong in my asking
Sent from my ONEPLUS A3003 using Tapatalk
From Alex and zFrontier:Any idea how long of a delay? Cause they were originally saying late April early May. So is it late may now or are they says months of delay? Cause they should have waited like 3 days for designs and then those late people should have gotten stock
"Airpotter is in the last stage of doing the customizations, some submitted the files very late hence some delay.
Alex"
Got a message from Alex they are doing my customization right now, can't wait!
Shipping will begin in this week
I second this request!Shipping will begin in this week
yayyyy can we have some pictures plssss :thumb: :thumb: :thumb:
I second this request!Shipping will begin in this week
yayyyy can we have some pictures plssss :thumb: :thumb: :thumb:
Sent from my VS996 using Tapatalk
I second this request!Shipping will begin in this week
yayyyy can we have some pictures plssss :thumb: :thumb: :thumb:
Sent from my VS996 using Tapatalk
Me three!!!
Wow mine has arrived already, love the packaging! Everything looks in order, now I just have to wait for my stabs to arrive....
Mine's a titanium bottom and black top btw:Show Image(https://uploads.tapatalk-cdn.com/20180601/ade37ce0fe309d29a65265d9665fc885.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180601/e07553871f34e302cd4dbc01ad5b49fd.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180601/a44c24dea4ae9000969e54a8af4fb130.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180601/a8d80b8f3cae21b83ce5d63ab8ef343f.jpg)
Looks really good! If you're feeling inspired, feel free to make an album of photos... ;)
I should be getting mine today and doing the build today, if so ill get some decent photos posted(no editing because that rig is down) tonight. Would people want a build log or just glamour shots?
Sent from my VS996 using Tapatalk
Mine arrived in the UK. The grey is super dark, almost black. Also comes with a spare diffuserShow Image(https://uploads.tapatalk-cdn.com/20180601/7cce6a89d32c99fb845dcb2c9b251720.jpg)Show Image(https://uploads.tapatalk-cdn.com/20180601/bebdc592f7d6ad8957ea7b03cd956dab.jpg)
Wow, look that. Did you go 2.25 LS?
I think we got the same colors of kit. Black with silver bottom and black weight
Still waiting for my shipping info. Are there still boards that haven't been shipped yet?I think the custom engraving boards are delayed because a few people have not uploaded designs yet.
Still waiting for my shipping info. Are there still boards that haven't been shipped yet?I think the custom engraving boards are delayed because a few people have not uploaded designs yet.
Does anyone know how to use this editor? Im lost and I did split backspace and I cant figure out how to change it from standard[attachimg=1]
Sent from my VS996 using Tapatalk
I finally figured it out. Thank you though for the replyDoes anyone know how to use this editor? Im lost and I did split backspace and I cant figure out how to change it from standard(Attachment Link)
Sent from my VS996 using Tapatalk
Anyone else think the MAO is more of a gray than white? Mine seems pretty darkThat's MAO, marketed as white but really it's light grey.
Anyone else think the MAO is more of a gray than white? Mine seems pretty darkThat's MAO, marketed as white but really it's light grey.
Anyone else think the MAO is more of a gray than white? Mine seems pretty darkThat's MAO, marketed as white but really it's light grey.
Ah ok, I'll keep that in mind going forward. Still looks nice though.
Anyone else think the MAO is more of a gray than white? Mine seems pretty darkThat's MAO, marketed as white but really it's light grey.
Ah ok, I'll keep that in mind going forward. Still looks nice though.
Just a little update regarding the shipping process and after-sales:
Units with Rose Gold components are delayed since those parts are from a different factory and they take extra time.
If you have any issue regarding the unit(s) you received, contact me directly thru email: alex.lin@zfrontier.com, dont for get to attach pictures and your order number.
It's a very light grey, white under certain light
Do you have a pic? Mine is rose gold top MAO bottom, if it looks gray that'll totally ruin it.
It's a very light grey, white under certain light
Do you have a pic? Mine is rose gold top MAO bottom, if it looks gray that'll totally ruin it.Show Image(https://uploads.tapatalk-cdn.com/20180604/597df2104f282af3cdcb5d9b104f858d.jpg)
Just a little update regarding the shipping process and after-sales:Emailed you on the 2nd and 4th of June, #ZFI28174005
Units with Rose Gold components are delayed since those parts are from a different factory and they take extra time.
If you have any issue regarding the unit(s) you received, contact me directly thru email: alex.lin@zfrontier.com, dont for get to attach pictures and your order number.
Any chance we can get proper TMK support?
I would love proper TMK/QMK support for this one.
I would love proper TMK/QMK support for this one.
Agreed, preferably with QMK! I'm finding the online programming software to be buggy and not entirely translated.
In addition to PCBs, any way to snag extra top/bottom/weight colors? Light green turned out to be much further into the yellow spectrum than anticipated.
Hey guys, have a problem. After I put on all the stabilizers and I put the aluminum plate on, the wire won't move since the plate doesn't let the wire move. Please help!!
That looks like you got a silver bottom and not an MAO one hellianne. The MAO pieces are a little darker than white but that just looks like anodized aluminum.
Also interested in hearing if there's any news about replacement parts - rose gold looks gorgeous but I got the wrong PCB! I would also not advertise the MAO as white..it's definitely silver, but I don't mind much.
(Attachment Link)
Hi guys,
those who brought the Gray COD67, are you happy with it?
If there will be a secound GB I would be in
Even though I haven't gotten to properly use mine yet, I honestly like the fit and finish of mine. I tried it with my ZealPC Zilents clipped into the plate with some temporary DSA caps stuck onto it, and it honestly sounds really nice too.
My only complaint is getting the wrong blue weight (anyone wanna trade a sky blue weight for my ocean blue one yet?), but it's really a nice case and board.
We may have had our weights swapped. I ordered an ocean blue weight but received a sky blue one. Unfortunately mine has a custom engraving.
What are the new features and changes you want for the next iteration of Cod67? I am trying to convince Potter to do another round of CodI would love to join a round 2!
What are the new features and changes you want for the next iteration of Cod67? I am trying to convince Potter to do another round of CodI would love to join a round 2!
Personally, I really like the case design as is (based on the pictures) with only a minor gripe against the bottom 2 bumpons covering the screws.
Please do your best to convince Potter :p