Author Topic: [GB] LZ : PhysiX [Complete] (Read 192237 times)

Mr_BeastQuake · « **Reply #50 on:** Thu, 24 October 2019, 20:13:45 »

I may have missed the "rubber mount tech" explanation. Is there one?

mrpetrov · « **Reply #51 on:** Thu, 24 October 2019, 20:41:42 »

Quote from: LifeZ on Thu, 24 October 2019, 19:48:50

Quote from: Damage on Thu, 24 October 2019, 13:10:21
What are the plate finishes like? Mirror polished, anodized like the case, or brushed? Any differences in finish between stainless steel and aluminum?

the surface of the weight plate is brushed.

Fantastic! I think a brushed finish is fabulous.

eyedrop · « **Reply #52 on:** Thu, 24 October 2019, 20:49:57 »

What color? Red or gray?

bthezebra · « **Reply #53 on:** Thu, 24 October 2019, 21:00:42 »

Here we go

Damage · « **Reply #54 on:** Thu, 24 October 2019, 21:05:27 »

Quote from: LifeZ on Thu, 24 October 2019, 19:48:50

Quote from: Damage on Thu, 24 October 2019, 13:10:21
What are the plate finishes like? Mirror polished, anodized like the case, or brushed? Any differences in finish between stainless steel and aluminum?

the surface of the weight plate is brushed.

Weight *and* plate?

Sorry, just not clear.

Capsy · « **Reply #55 on:** Thu, 24 October 2019, 21:06:32 »

Quote from: Mr_BeastQuake on Thu, 24 October 2019, 20:13:45

I may have missed the "rubber mount tech" explanation. Is there one?

It's in the OP. http://imgur.com/a/zxG1iSU

ullr · « **Reply #56 on:** Thu, 24 October 2019, 21:26:53 »

Just ballpark figure, what should I expect for shipping to the US with one basic kit and a wrist wrest?

Also this GB will probably sell several hundred units I'm guessing

LifeZ · « **Reply #57 on:** Thu, 24 October 2019, 21:34:32 »

Many orders will close the first order tomorrow???
Large quantities are difficult to control quality

lol

LifeZ · « **Reply #58 on:** Thu, 24 October 2019, 21:35:54 »

Quote from: ullr on Thu, 24 October 2019, 21:26:53

Just ballpark figure, what should I expect for shipping to the US with one basic kit and a wrist wrest?

Also this GB will probably sell several hundred units I'm guessing

EMS Shipping with tracking no~~~

mrpetrov · « **Reply #59 on:** Thu, 24 October 2019, 21:41:24 »

Quote from: LifeZ on Thu, 24 October 2019, 21:34:32

Many orders will close the first order tomorrow???
Large quantities are difficult to control quality

lol

wow! how many orders will force you to close early??

Slash Emperor · « **Reply #60 on:** Thu, 24 October 2019, 21:54:52 »

Put in for black with carbon fiber plate and black wrist rest for the murdered out look, but heavily debating on switching the case to red after taking another look at the red LZ MPs...

Decisions, decisions.

macclack · « **Reply #61 on:** Thu, 24 October 2019, 23:24:04 »

Welp, so much for “no keyboard purchases for the rest of the year.” This is too good to pass up. In for a black with carbon fiber plate. Finally found a home for my Modern Dolch set. Hiney PCB is

macclack · « **Reply #62 on:** Thu, 24 October 2019, 23:30:59 »

Quote from: mrpetrov on Thu, 24 October 2019, 21:41:24

Quote from: LifeZ on Thu, 24 October 2019, 21:34:32
Many orders will close the first order tomorrow???
Large quantities are difficult to control quality

lol

wow! how many orders will force you to close early??

Eek hope I got in on time.
But for real, how could LZ not expect this to have “many orders” Lol

Jubileus · « **Reply #63 on:** Thu, 24 October 2019, 23:35:28 »

I'm in! But I think I sent my order twice. How can I correct it LZ? Thanks

steezkeez · « **Reply #64 on:** Fri, 25 October 2019, 00:37:25 »

Figured this is my only opportunity to get an LZ board so I went in on Red/CF. Hopefully I made the cutoff!

Puddsy · « **Reply #65 on:** Fri, 25 October 2019, 00:38:46 »

Quote from: ullr on Thu, 24 October 2019, 21:26:53

Just ballpark figure, what should I expect for shipping to the US with one basic kit and a wrist wrest?

Also this GB will probably sell several hundred units I'm guessing

LZ typically caps at around 70, since he's pretty serious with QC. Wouldn't be surprised to see it go up to 100, but even that's a stretch.

orangesoh · « **Reply #66 on:** Fri, 25 October 2019, 01:20:18 »

Just ordered. I got in with Red/ CF too.

PotatoTM · « **Reply #67 on:** Fri, 25 October 2019, 01:26:30 »

Ended up getting in on this, it's going to be an expensive end of the year! GLWGB!

dantambok · « **Reply #68 on:** Fri, 25 October 2019, 01:51:16 »

Let’s gooooo

xIHA · « **Reply #69 on:** Fri, 25 October 2019, 04:32:58 »

In for a black and PC so hyped

fabryrock · « **Reply #70 on:** Fri, 25 October 2019, 04:53:32 »

Any pic of the weight at all? Time is running out and since it is not a cheap board i would like to see the whole "package" thanks

Khers · « **Reply #71 on:** Fri, 25 October 2019, 06:03:25 »

Quote from: fabryrock on Fri, 25 October 2019, 04:53:32

Any pic of the weight at all? Time is running out and since it is not a cheap board i would like to see the whole "package" thanks

The weight is internal, brushed stainless and visible in the assembly album, from which I got this:

fabryrock · « **Reply #72 on:** Fri, 25 October 2019, 06:57:47 »

Quote from: Khers on Fri, 25 October 2019, 06:03:25

Quote from: fabryrock on Fri, 25 October 2019, 04:53:32
Any pic of the weight at all? Time is running out and since it is not a cheap board i would like to see the whole "package" thanks

The weight is internal, brushed stainless and visible in the assembly album, from which I got this:

Show Image

Ok i got It now thanks even t'ho i would like to see actual renders of the Weight itself. But im telling myself what Is the point of an internal Wright if It Is not visible cause It Is not right?

kturnbull · « **Reply #73 on:** Fri, 25 October 2019, 06:59:45 »

Quote from: fabryrock on Fri, 25 October 2019, 06:57:47

Ok i got It now thanks even t'ho i would like to see actual renders of the Weight itself. But im telling myself what Is the point of an internal Wright if It Is not visible cause It Is not right?

And here I'm hoping the weight brings this puppy to 'possibly heavier overall than LZ's ergo' ... =)

Mr.Elli0t · « **Reply #74 on:** Fri, 25 October 2019, 07:39:59 »

Are the stabs screw in or snap in?

ARSLOCK · « **Reply #75 on:** Fri, 25 October 2019, 08:12:54 »

Looks like the form is closed now, how many orders?

LifeZ · « **Reply #76 on:** Fri, 25 October 2019, 08:48:35 »

Quote from: Mr.Elli0t on Fri, 25 October 2019, 07:39:59

Are the stabs screw in or snap in?

Cherry original Stabz
Snap in.

keebweeb · « **Reply #77 on:** Fri, 25 October 2019, 08:50:56 »

Good looking board! It's nice to see more high end ergo boards being made.

LifeZ · « **Reply #78 on:** Fri, 25 October 2019, 08:51:44 »

****************************
We close the order with a lot of unexpected quantity.
please understand. If a cancellation quantity occurs after your last payment, we will open additional orders.
Thank you for your participation.

Mr.Elli0t · « **Reply #79 on:** Fri, 25 October 2019, 09:08:52 »

Quote from: LifeZ on Fri, 25 October 2019, 08:48:35

Quote from: Mr.Elli0t on Fri, 25 October 2019, 07:39:59
Are the stabs screw in or snap in?
Cherry original Stabz
Snap in.

Will I be able to put screw in stabs?

Sent from my Pixel 4 XL using Tapatalk

swerderv · « **Reply #80 on:** Fri, 25 October 2019, 09:10:52 »

Hopefully I made it. Didn’t join until a few hours ago.

wholypantalones · « **Reply #81 on:** Fri, 25 October 2019, 09:17:42 »

Quote from: Mr.Elli0t on Fri, 25 October 2019, 09:08:52

Quote from: LifeZ on Fri, 25 October 2019, 08:48:35
Quote from: Mr.Elli0t on Fri, 25 October 2019, 07:39:59
Are the stabs screw in or snap in?
Cherry original Stabz
Snap in.
Will I be able to put screw in stabs?

Sent from my Pixel 4 XL using Tapatalk

They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.

Mr.Elli0t · « **Reply #82 on:** Fri, 25 October 2019, 09:21:36 »

Quote from: wholypantalones on Fri, 25 October 2019, 09:17:42

Quote from: Mr.Elli0t on Fri, 25 October 2019, 09:08:52
Quote from: LifeZ on Fri, 25 October 2019, 08:48:35
Quote from: Mr.Elli0t on Fri, 25 October 2019, 07:39:59
Are the stabs screw in or snap in?
Cherry original Stabz
Snap in.
Will I be able to put screw in stabs?

Sent from my Pixel 4 XL using Tapatalk

They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.

Thanks! I figured as much, but wasn't sure because all I've ever used is screw in, is there any noticable difference between the two other than the way they are held on to the PCB?

Sent from my Pixel 4 XL using Tapatalk

kturnbull · « **Reply #83 on:** Fri, 25 October 2019, 09:22:18 »

Quote from: wholypantalones on Fri, 25 October 2019, 09:17:42

They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.

I wish there were stabs that were both 'screw in' ... and didn't have the possibility of the bars coming loose. A non 'clip in' bar or something.

wholypantalones · « **Reply #84 on:** Fri, 25 October 2019, 09:28:04 »

Quote from: kturnbull on Fri, 25 October 2019, 09:22:18

Quote from: wholypantalones on Fri, 25 October 2019, 09:17:42
They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.

I wish there were stabs that were both 'screw in' ... and didn't have the possibility of the bars coming loose. A non 'clip in' bar or something.

Jam some toothpicks in the clips, they won't move.

kturnbull · « **Reply #85 on:** Fri, 25 October 2019, 09:31:07 »

Quote from: wholypantalones on Fri, 25 October 2019, 09:28:04

Jam some toothpicks in the clips, they won't move.

?? I mean where the bars clip in... Don't think there's enough room for toothpicks in that little plastic space? (not the clips to the PCB)

Steezus · « **Reply #86 on:** Fri, 25 October 2019, 09:37:43 »

Quote from: kturnbull on Fri, 25 October 2019, 09:31:07

Quote from: wholypantalones on Fri, 25 October 2019, 09:28:04
Jam some toothpicks in the clips, they won't move.

?? I mean where the bars clip in... Don't think there's enough room for toothpicks in that little plastic space? (not the clips to the PCB)

Not where the bar clips into the stabilizer. It's a common stab mod where you jam the toothpick in from the bottom side into the part of the stab that clips into the PCB. This prevents the clip from contracting and popping out of the hole in the PCB.

wholypantalones · « **Reply #87 on:** Fri, 25 October 2019, 09:45:44 »

Quote from: kturnbull on Fri, 25 October 2019, 09:31:07

Quote from: wholypantalones on Fri, 25 October 2019, 09:28:04
Jam some toothpicks in the clips, they won't move.

?? I mean where the bars clip in... Don't think there's enough room for toothpicks in that little plastic space? (not the clips to the PCB)

Sorry, I read that incorrectly. I meant where they clip in to the pcb.

If you put the lube under the bar, on the clip housing instead of where the bar clips in, the bar doesn't come unclipped so easily.

See my ****ty insta post about it.

https://www.instagram.com/p/B0rYStwn0Am/?igshid=17s2olip3n9as

kturnbull · « **Reply #88 on:** Fri, 25 October 2019, 09:54:53 »

Quote from: wholypantalones on Fri, 25 October 2019, 09:45:44

Sorry, I read that incorrectly. I meant where they clip in to the pcb.

If you put the lube under the bar, on the clip housing instead of where the bar clips in, the bar doesn't come unclipped so easily.

See my ****ty insta post about it.

https://www.instagram.com/p/B0rYStwn0Am/?igshid=17s2olip3n9as

Ahh... Thankee =) I'll try that.

Wongstongs · « **Reply #89 on:** Fri, 25 October 2019, 10:44:16 »

TFW you were super busy yesterday but the GB was unlimited so it was all cool and you could fill out the form the next day but it really wasn't and now the form is closed

eugenez90 · « **Reply #90 on:** Fri, 25 October 2019, 10:50:40 »

Damm, how many orders did you receive before closing?

Mr.Elli0t · « **Reply #91 on:** Fri, 25 October 2019, 10:51:20 »

Quote from: eugenez90 on Fri, 25 October 2019, 10:50:40

Damm, how many orders did you receive before closing?

Great question! I was wondering the same thing

Sent from my Pixel 4 XL using Tapatalk

Remsky · « **Reply #92 on:** Fri, 25 October 2019, 10:53:46 »

I wonder what the color spread was like between orders.

eyedrop · « **Reply #93 on:** Fri, 25 October 2019, 10:58:27 »

So this is a done deal then?

Sent from my Pixel 3 using Tapatalk

lirtle · « **Reply #94 on:** Fri, 25 October 2019, 15:18:07 »

Are orders going to reopen or did I miss the boat completely?

NoxNoxNox · « **Reply #95 on:** Fri, 25 October 2019, 15:19:14 »

Darn, I had the form open this morning but didn't finish filling it out before work, came home and its closed. Guess I shouldn't have debated on color and just gone with black. Oh well.

whyamihere · « **Reply #96 on:** Fri, 25 October 2019, 15:31:57 »

:O excited for this

Damage · « **Reply #97 on:** Fri, 25 October 2019, 19:41:39 »

Anyone get an invoice yet?

ProlificPanda · « **Reply #98 on:** Fri, 25 October 2019, 19:49:06 »

Ooof, figured I would fill it out today, didn't think it would already be closed.

N0GLUT0N · « **Reply #99 on:** Fri, 25 October 2019, 20:18:45 »

nooo the form is closed

News:

Author Topic: [GB] LZ : PhysiX [Complete] (Read 192237 times)