*Cringe Removed
*
Now you get to program it.
I initially did this with TMK using Kairyu's toolkit.
First off you need to build out your layouts using the keyboard layout editor
http://www.keyboard-layout-editor.com/When you are done, you need to copy the raw data, one layer at a time into the super easy TMK Keymap generator here
http://www.enjoyclick.org/tkg/You want to make sure you select the right board, that would be the GH60 RevCHN 2nd party.
You can increase your layer count as you need.
Youve got your layers pasted in.
Set our Fn0 to trigger only momentarily, and have fn#s set up to trigger backlighting options
Set up the default backlighting behaviors.
When you have all the data entered and settings selected, just click to download your .eep file.
You need to get the toolkit to setup and program your board now. you can find it at
https://github.com/kairyu/tkg-toolkitDownload that zip folder and extract it all.
Assuming you are using windows, update the drivers for the board controller by using the zadig.exe file and clicking the buttons.
Once that is done your ready to program.
In the windows folder, run the setup file. select the options "2", "N", "1" and press any key.
Finally you drag the Keymap.eep file from earlier and drop it ONTO the reflash.bat file.
That will run it and say it is waiting for bootloader.
When it says this, press the button on the back.
It should program the board while showing you the process on the screen.
Press any key and you are done! You might need to use a second keyboard to press a key at the end of the reflash, because the 60 satan might be unresponsive at first.
Thanks for reading, and let me know if I missed something!