Author Topic: [GB] Reborn 60% keyborad (Shipping -check you eamil .) (Read 52321 times)

LightningXI · « **Reply #150 on:** Sun, 30 December 2018, 01:51:05 »

Quote from: evoluchanel on Sun, 30 December 2018, 01:20:49

Oh looks like they are there too. You can see on the bottom left of the top piece :\

Oh, wow, good eye. That's a real bummer. I hope things can be remediated for you.

glubazoid · « **Reply #151 on:** Sun, 30 December 2018, 02:27:02 »

Quote from: evoluchanel on Sat, 29 December 2018, 19:14:37

The screws for mounting the plate to the top piece left imprints
Show Image

Show Image

Show Image

I have the same issue. Sure, it won’t be seen with caps on, but it’s still an eyesore.

Tsuruya · « **Reply #152 on:** Mon, 31 December 2018, 20:23:20 »

I have the same problem with mine along with a blotch of uneven ano. The screw tap defect is clearly visible to the bottom wall of the inner top case.

Water will something be done for the affected top cases?

glubazoid · « **Reply #153 on:** Wed, 02 January 2019, 02:54:50 »

On a side note, can we get the PCB firmware files?

feralfoo · « **Reply #154 on:** Thu, 03 January 2019, 01:41:18 »

My silver case arrived today, happy to report no defects. Sexy piece of kit

Water lee · « **Reply #155 on:** Thu, 03 January 2019, 07:24:55 »

Hello orders

i am so sorry have been many days not log in here .

This is my first keyboard design ,and the keyboard are not so Perfect

about screws is my fault, due to i have place the screw too near $:-\$

Water lee · « **Reply #156 on:** Thu, 03 January 2019, 08:11:15 »

json and hex .

feralfoo · « **Reply #157 on:** Fri, 04 January 2019, 02:55:40 »

@Water Lee would you mind posting the plate design files? I'd like to get some custom plates cut.

Water lee · « **Reply #158 on:** Fri, 04 January 2019, 07:02:05 »

Quote from: feralfoo on Fri, 04 January 2019, 02:55:40

@Water Lee would you mind posting the plate design files? I'd like to get some custom plates cut.

For sure .
you eamil address pls pm me

matrixzj · « **Reply #159 on:** Mon, 14 January 2019, 09:02:59 »

Thanks for your kindly support

Water lee · « **Reply #160 on:** Mon, 14 January 2019, 23:36:38 »

Laplanoel
this id express cant contact you .please check you phone

Water lee · « **Reply #161 on:** Mon, 14 January 2019, 23:38:30 »

Quote from: matrixzj on Mon, 14 January 2019, 09:02:59

when can i get my replacement ?

already ask people in china ship it out

BerserkZz · « **Reply #162 on:** Wed, 30 January 2019, 16:01:52 »

How do you guys flash and map the pcb? I know it's late cuz I used a bface pcb for this one but I want to reuse the mk60 pcb on another build.

1Weeb · « **Reply #163 on:** Thu, 07 March 2019, 22:25:45 »

MAO looks great, screw thread showing on the inner top piece seem to be the only issue but they work fine and can't even see them once built.

Etherealsound · « **Reply #164 on:** Fri, 08 March 2019, 16:45:29 »

Quote from: 1Weeb on Thu, 07 March 2019, 22:25:45

MAO looks great, screw thread showing on the inner top piece seem to be the only issue but they work fine and can't even see them once built.

(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)
(Attachment Link)

Dam that's clean. I wish I had gotten WKL aha

Tyson · « **Reply #165 on:** Fri, 26 April 2019, 08:41:56 »

I managed to buy one off of mechmarket and it's getting delivered today. Does anyone know if other 60% PCBs will work with this board? I'd love to get a Zeal60 for this thing!

1Weeb · « **Reply #166 on:** Fri, 26 April 2019, 14:42:37 »

Quote from: tyson522 on Fri, 26 April 2019, 08:41:56

I managed to buy one off of mechmarket and it's getting delivered today. Does anyone know if other 60% PCBs will work with this board? I'd love to get a Zeal60 for this thing!

Should work with most standard 60% but only with mini usb since the wider part of a USB C is a bit too wide to fit all the way inside the hole,

rooney · « **Reply #167 on:** Sun, 05 May 2019, 17:45:38 »

Quote from: 1Weeb on Fri, 26 April 2019, 14:42:37

Quote from: tyson522 on Fri, 26 April 2019, 08:41:56
I managed to buy one off of mechmarket and it's getting delivered today. Does anyone know if other 60% PCBs will work with this board? I'd love to get a Zeal60 for this thing!

Should work with most standard 60% but only with mini usb since the wider part of a USB C is a bit too wide to fit all the way inside the hole,

I know someone who used a zeal60 pcb in the Reborn60 so you should be good.

I was wondering if I am able to use a DZ60RGB with a brass plate in this Reborn60 as well.

Any insight would be awesome, thank you!

Etherealsound · « **Reply #168 on:** Mon, 06 May 2019, 03:23:19 »

Quote from: rooney on Sun, 05 May 2019, 17:45:38

Quote from: 1Weeb on Fri, 26 April 2019, 14:42:37
Quote from: tyson522 on Fri, 26 April 2019, 08:41:56
I managed to buy one off of mechmarket and it's getting delivered today. Does anyone know if other 60% PCBs will work with this board? I'd love to get a Zeal60 for this thing!

Should work with most standard 60% but only with mini usb since the wider part of a USB C is a bit too wide to fit all the way inside the hole,

I know someone who used a zeal60 pcb in the Reborn60 so you should be good.

I was wondering if I am able to use a DZ60RGB with a brass plate in this Reborn60 as well.

Any insight would be awesome, thank you!

It depends on which rev of the Zeal60 PCB. The newest one uses USB C which isn't compatible with this case, I think.

rooney · « **Reply #169 on:** Mon, 06 May 2019, 03:37:19 »

Quote from: Etherealsound on Mon, 06 May 2019, 03:23:19

Quote from: rooney on Sun, 05 May 2019, 17:45:38
Quote from: 1Weeb on Fri, 26 April 2019, 14:42:37
Quote from: tyson522 on Fri, 26 April 2019, 08:41:56
I managed to buy one off of mechmarket and it's getting delivered today. Does anyone know if other 60% PCBs will work with this board? I'd love to get a Zeal60 for this thing!

Should work with most standard 60% but only with mini usb since the wider part of a USB C is a bit too wide to fit all the way inside the hole,

I know someone who used a zeal60 pcb in the Reborn60 so you should be good.

I was wondering if I am able to use a DZ60RGB with a brass plate in this Reborn60 as well.

Any insight would be awesome, thank you!

It depends on which rev of the Zeal60 PCB. The newest one uses USB C which isn't compatible with this case, I think.

What do you think of the dz60rgb pcb with the brass plate, would that fit?

Choobies · « **Reply #170 on:** Mon, 06 May 2019, 19:05:41 »

Quote from: Etherealsound on Mon, 06 May 2019, 03:23:19

Quote from: rooney on Sun, 05 May 2019, 17:45:38
Quote from: 1Weeb on Fri, 26 April 2019, 14:42:37
Quote from: tyson522 on Fri, 26 April 2019, 08:41:56
I managed to buy one off of mechmarket and it's getting delivered today. Does anyone know if other 60% PCBs will work with this board? I'd love to get a Zeal60 for this thing!

Should work with most standard 60% but only with mini usb since the wider part of a USB C is a bit too wide to fit all the way inside the hole,

I know someone who used a zeal60 pcb in the Reborn60 so you should be good.

I was wondering if I am able to use a DZ60RGB with a brass plate in this Reborn60 as well.

Any insight would be awesome, thank you!

It depends on which rev of the Zeal60 PCB. The newest one uses USB C which isn't compatible with this case, I think.

I use the kbd6x pcb in my Reborn, which uses USB-C. I had to dremel the housing of the USB-C cable to make it fit through the port of the case, but it works!

Tsuruya · « **Reply #171 on:** Wed, 15 May 2019, 12:32:38 »

Was anyone able to get the plate files before Waterlee completely dipped from this platform? I'd like the data to have plates cut but Waterlee hasn't responded on pm or mail. If anyone managed to get it from the runner would you mind sharing it? Thanks!

Etherealsound · « **Reply #172 on:** Fri, 02 August 2019, 02:06:03 »

Quote from: Tsuruya on Wed, 15 May 2019, 12:32:38

Was anyone able to get the plate files before Waterlee completely dipped from this platform? I'd like the data to have plates cut but Waterlee hasn't responded on pm or mail. If anyone managed to get it from the runner would you mind sharing it? Thanks!

Same, I'd love it if I could get the plate files.

Choobies · « **Reply #173 on:** Fri, 02 August 2019, 08:36:50 »

That's curious, Waterlee was responding to my intermittent PMs not too long ago. Anyway, here's the plate file that he shared with me. He was open about giving it out so it should be okay for me to post it here.

https://www.dropbox.com/s/o9puxfhkxy4r0le/Reborn%2060.DXF?dl=0

News:

Author Topic: [GB] Reborn 60% keyborad (Shipping -check you eamil .) (Read 52321 times)