« previous next »
Pages: « 1 [2] 3 »  All   Go Down

Author Topic: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB complete，waiting to sell extras)  (Read 38485 times)

0 Members and 1 Guest are viewing this topic.

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit
« Reply #50 on: Wed, 07 August 2019, 04:02:02 »
Quote from: vi0till on Wed, 07 August 2019, 03:41:50
It will open for a week?

Quote from: C³—Ears on Wed, 07 August 2019, 03:19:11
GB will start next week.
Not sure yet. Probably a week.
Logged

Offline fuzzybaffy

  • Posts: 553
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #51 on: Wed, 07 August 2019, 04:45:53 »
If it isn't too much trouble, could you give price estimates on the various parts (like poly plate, etc.)? So I can think about the purchase ahead of time before the GB...
« Last Edit: Wed, 07 August 2019, 04:48:43 by fuzzybaffy »
Logged

Offline YellowHalo

  • Posts: 42
  • Location: Singapore
  • See You Starside
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #52 on: Wed, 07 August 2019, 05:49:24 »
How about having the branding engraved exactly like the original instead of a badge?
Logged

Offline iaman

  • Posts: 186
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit
« Reply #53 on: Wed, 07 August 2019, 07:16:41 »
Quote from: Puddsy on Tue, 06 August 2019, 19:32:46
don't overthink it
i doggedly refuse to do anything less than massively overthinking my keymaps
Logged

Offline steezkeez

  • Posts: 259
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #54 on: Wed, 07 August 2019, 07:55:06 »
I have heard that polycarbonate is a hard material to work with which results in a very fragile keyboard, possible alignment issues, etc. (see Polaris GB). Have you encountered any of these issues during your prototyping? Do you have concerns regarding this?
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #55 on: Wed, 07 August 2019, 13:29:32 »
Quote from: fuzzybaffy on Wed, 07 August 2019, 04:45:53
If it isn't too much trouble, could you give price estimates on the various parts (like poly plate, etc.)? So I can think about the purchase ahead of time before the GB...
Poly 20 USD. PCB 50 USD
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #56 on: Wed, 07 August 2019, 13:30:06 »
Quote from: YellowHalo on Wed, 07 August 2019, 05:49:24
How about having the branding engraved exactly like the original instead of a badge?
Original is a Ti badge
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #57 on: Wed, 07 August 2019, 13:46:21 »
Quote from: steezkeez on Wed, 07 August 2019, 07:55:06
I have heard that polycarbonate is a hard material to work with which results in a very fragile keyboard, possible alignment issues, etc. (see Polaris GB). Have you encountered any of these issues during your prototyping? Do you have concerns regarding this?
It's a very hard material to work indeed. It easily bend after CNC. We have working on it since last November. Tried a lot of different Poly carbonate and a lot different ways to CNC them. The Top case and bottom is not  aligned like aluminium case,etc. Fortunately,we have solve most of the problems.The only thing that not perfect is the alignment between top and bottom case.That being said,you could hardly see the problem,only if you touch it very carefully you can feel a little bit of it.And a lot of aluminium cases have this problem as well.This is nearly impossible to solve for a TKL. Rest assure we won't run something that have a lot problems we can't solve. It's too bad for our Brand. We value our brand more than profits.
Logged

Offline the pokemon kid

  • Posts: 199
  • Snorlax z z z
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #58 on: Wed, 07 August 2019, 13:54:10 »
$320 includes Case, Brass plate and PCB?
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #59 on: Wed, 07 August 2019, 14:07:02 »
Quote from: the pokemon kid on Wed, 07 August 2019, 13:54:10
$320 includes Case, Brass plate and PCB?
yup.
Logged

Offline the pokemon kid

  • Posts: 199
  • Snorlax z z z
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #60 on: Wed, 07 August 2019, 14:20:42 »
Quote from: C³—Ears on Wed, 07 August 2019, 14:07:02
Quote from: the pokemon kid on Wed, 07 August 2019, 13:54:10
$320 includes Case, Brass plate and PCB?
yup.

<3 Excellent! My body and wallet are ready!
Logged

Offline foxlive

  • Posts: 342
  • Location: France
  • The quick brown fox jumps over the lazy dog
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #61 on: Wed, 07 August 2019, 15:15:23 »
I’m tempted ahah!
I always wanted a polycarb board, this maybe the right moment !  :cool:
Logged
               

Offline Capsy

  • Posts: 346
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #62 on: Wed, 07 August 2019, 15:20:05 »
Are the pics that you've shared of the prototype? Can't figure it out plus, any pics of the back and the USBC connector area?
Logged

Offline steezkeez

  • Posts: 259
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #63 on: Wed, 07 August 2019, 16:22:18 »
Quote from: C³—Ears on Wed, 07 August 2019, 13:46:21
Quote from: steezkeez on Wed, 07 August 2019, 07:55:06
I have heard that polycarbonate is a hard material to work with which results in a very fragile keyboard, possible alignment issues, etc. (see Polaris GB). Have you encountered any of these issues during your prototyping? Do you have concerns regarding this?
It's a very hard material to work indeed. It easily bend after CNC. We have working on it since last November. Tried a lot of different Poly carbonate and a lot different ways to CNC them. The Top case and bottom is not  aligned like aluminium case,etc. Fortunately,we have solve most of the problems.The only thing that not perfect is the alignment between top and bottom case.That being said,you could hardly see the problem,only if you touch it very carefully you can feel a little bit of it.And a lot of aluminium cases have this problem as well.This is nearly impossible to solve for a TKL. Rest assure we won't run something that have a lot problems we can't solve. It's too bad for our Brand. We value our brand more than profits.

Thank you for the thorough response. It’s unfortunate PC is so troublesome to work with (at no fault of your own, it’s just the nature of the material). I will definitely be in for a board though, your efforts are much appreciated!
Logged

Offline temp0321

  • Posts: 37
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #64 on: Wed, 07 August 2019, 16:33:00 »
Will you show us what the final badge will be before going in for gb phase? Also, would you have an option for pc plate instead of brass?
Logged

Offline im_hide

  • Posts: 38
  • Location: St Louis, MO
  • dont think
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #65 on: Wed, 07 August 2019, 17:28:05 »
Will we have shipping estimates before the group buy starts? Also, can the gb time be extended by a week if possible? I'm unsure if I could pay the invoice in time depending on when the GB starts and ends. (Aug 19th is the earliest I could pay)
« Last Edit: Wed, 07 August 2019, 19:51:10 by im_hide »
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #66 on: Wed, 07 August 2019, 21:26:12 »
Quote from: Capsy on Wed, 07 August 2019, 15:20:05
Are the pics that you've shared of the prototype? Can't figure it out plus, any pics of the back and the USBC connector area?
Yup, that's prototype samples.Sorry i didnt connector pics. It's plain.
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #67 on: Wed, 07 August 2019, 21:31:44 »
Quote from: temp0321 on Wed, 07 August 2019, 16:33:00
Will you show us what the final badge will be before going in for gb phase? Also, would you have an option for pc plate instead of brass?
Of course we will show it when GB phase. If the demand is high,i can give a PC plate in the kit with no price change. And sell half PC plate is anyone is interested.
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #68 on: Wed, 07 August 2019, 21:34:06 »
Quote from: im_hide on Wed, 07 August 2019, 17:28:05
Will we have shipping estimates before the group buy starts? Also, can the gb time be extended by a week if possible? I'm unsure if I could pay the invoice in time depending on when the GB starts and ends. (Aug 19th is the earliest I could pay)
My experience tells me the shipping cost would from 25-40 depend on where you are. We ship it from China and US/Korea have the cheapest shipping Fee. You can discuss payment time when GB is live with me. PM me when GB started,Thank you
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #69 on: Wed, 07 August 2019, 21:36:56 »
Quote

Thank you for the thorough response. It’s unfortunate PC is so troublesome to work with (at no fault of your own, it’s just the nature of the material). I will definitely be in for a board though, your efforts are much appreciated!

Thanks,bro. It really means a lot. We will def make some kick-ass PC boards! :thumb: :thumb: :thumb:
Logged

Offline nicx

  • Posts: 83
  • Location: USA
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #70 on: Wed, 07 August 2019, 21:40:56 »
Quote from: steezkeez on Wed, 07 August 2019, 07:55:06
I have heard that polycarbonate is a hard material to work with which results in a very fragile keyboard, possible alignment issues, etc. (see Polaris GB). Have you encountered any of these issues during your prototyping? Do you have concerns regarding this?

Haven't heard this before? Any truth to it? Don;t know too much about PC boards and don't have the most spacious situation rn to keep it safe lol.
Logged

Offline temp0321

  • Posts: 37
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #71 on: Wed, 07 August 2019, 21:42:35 »
Quote from: C³—Ears on Wed, 07 August 2019, 21:31:44
Quote from: temp0321 on Wed, 07 August 2019, 16:33:00
Will you show us what the final badge will be before going in for gb phase? Also, would you have an option for pc plate instead of brass?
Of course we will show it when GB phase. If the demand is high,i can give a PC plate in the kit with no price change. And sell half PC plate is anyone is interested.

Wow that would be so sweet. Sooooo in for this then XD
Logged

Offline jwilthethrill

  • Posts: 15
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #72 on: Wed, 07 August 2019, 21:57:57 »
Quote from: temp0321 on Wed, 07 August 2019, 21:42:35
Quote from: C³—Ears on Wed, 07 August 2019, 21:31:44
Quote from: temp0321 on Wed, 07 August 2019, 16:33:00
Will you show us what the final badge will be before going in for gb phase? Also, would you have an option for pc plate instead of brass?
Of course we will show it when GB phase. If the demand is high,i can give a PC plate in the kit with no price change. And sell half PC plate is anyone is interested.

Wow that would be so sweet. Sooooo in for this then XD

That would be an amazing option, either choose brass or PC plate with kit.  :thumb:
Logged

Offline steezkeez

  • Posts: 259
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #73 on: Wed, 07 August 2019, 23:01:16 »
Quote from: nicx on Wed, 07 August 2019, 21:40:56
Quote from: steezkeez on Wed, 07 August 2019, 07:55:06
I have heard that polycarbonate is a hard material to work with which results in a very fragile keyboard, possible alignment issues, etc. (see Polaris GB). Have you encountered any of these issues during your prototyping? Do you have concerns regarding this?

Haven't heard this before? Any truth to it? Don;t know too much about PC boards and don't have the most spacious situation rn to keep it safe lol.

I think this article sums it up pretty well: https://brianlee.blog/2018/12/14/review-yuktsis-tgr-910re-polycarbonate/
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #74 on: Thu, 08 August 2019, 00:24:19 »
Quote

I think this article sums it up pretty well: https://brianlee.blog/2018/12/14/review-yuktsis-tgr-910re-polycarbonate/

Good article. Poly carbonate do have its own limit. Especially shape change after CNC. It's a Hugh pain in the ass. Luckily we have found the right materiel provider and right way to machine them.

Look the bright side. The look of it is just so good that we can refuse it.  ;D ;D ;D


Logged

Offline nevaenuf

  • Posts: 72
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #75 on: Thu, 08 August 2019, 07:28:15 »
No love for an accompanying numpad?  I'd love to see that!
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #76 on: Thu, 08 August 2019, 11:01:28 »
Quote from: nevaenuf on Thu, 08 August 2019, 07:28:15
No love for an accompanying numpad?  I'd love to see that!
LOL, i thought people love that
Logged

Offline iaman

  • Posts: 186
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #77 on: Thu, 08 August 2019, 11:14:06 »
Quote from: C³—Ears on Thu, 08 August 2019, 11:01:28
Quote from: nevaenuf on Thu, 08 August 2019, 07:28:15
No love for an accompanying numpad?  I'd love to see that!
LOL, i thought people love that
I'd love a matching numpad but at this point I'm so used to never seeing it happen that I never ask 😭
Logged

Offline bthezebra

  • Posts: 464
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #78 on: Thu, 08 August 2019, 12:04:16 »
Quote from: iaman on Thu, 08 August 2019, 11:14:06
Quote from: C³—Ears on Thu, 08 August 2019, 11:01:28
Quote from: nevaenuf on Thu, 08 August 2019, 07:28:15
No love for an accompanying numpad?  I'd love to see that!
LOL, i thought people love that
I'd love a matching numpad but at this point I'm so used to never seeing it happen that I never ask
I support the notion of a number pad! Haven't seen a poly one yet
Logged

Offline iaman

  • Posts: 186
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #79 on: Thu, 08 August 2019, 12:12:26 »
Quote from: bthezebra on Thu, 08 August 2019, 12:04:16
Quote from: iaman on Thu, 08 August 2019, 11:14:06
Quote from: C³—Ears on Thu, 08 August 2019, 11:01:28
Quote from: nevaenuf on Thu, 08 August 2019, 07:28:15
No love for an accompanying numpad?  I'd love to see that!
LOL, i thought people love that
I'd love a matching numpad but at this point I'm so used to never seeing it happen that I never ask
I support the notion of a number pad! Haven't seen a poly one yet
Only poly one I can think of to-date is the one KBDFans launched alongside the revision of their TKL, which is sold-out.
Logged

Offline meIIow

  • Posts: 11
  • Location: SF Bay Area
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #80 on: Thu, 08 August 2019, 13:06:43 »
Looks awesome, might have to get this and polaris this month :O good thing paycheck comes tomorrow!
Logged

Offline bthezebra

  • Posts: 464
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #81 on: Thu, 08 August 2019, 15:28:24 »
Quote from: iaman on Thu, 08 August 2019, 12:12:26
Quote from: bthezebra on Thu, 08 August 2019, 12:04:16
Quote from: iaman on Thu, 08 August 2019, 11:14:06
Quote from: C³—Ears on Thu, 08 August 2019, 11:01:28
Quote from: nevaenuf on Thu, 08 August 2019, 07:28:15
No love for an accompanying numpad?  I'd love to see that!
LOL, i thought people love that
I'd love a matching numpad but at this point I'm so used to never seeing it happen that I never ask
I support the notion of a number pad! Haven't seen a poly one yet
Only poly one I can think of to-date is the one KBDFans launched alongside the revision of their TKL, which is sold-out.
Well that justifies that there is a market for that type of product
Logged

Offline click clack jack

  • Posts: 76
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #82 on: Thu, 08 August 2019, 16:48:11 »
I LOVE the lettering on the top. Would you consider the same language on the back lettering too?
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #83 on: Thu, 08 August 2019, 21:36:43 »
Quote from: click clack jack on Thu, 08 August 2019, 16:48:11
I LOVE the lettering on the top. Would you consider the same language on the back lettering too?

Actually,i am not a fan of engrave letters on a board. Just too plain looks bad. I think we will pass that on this one. Maybe next time.

I think the letter on top is fantastic. I am really love it myself. :D :D :D
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #84 on: Thu, 08 August 2019, 21:41:11 »
Quote from: iaman on Thu, 08 August 2019, 11:14:06
Quote from: C³—Ears on Thu, 08 August 2019, 11:01:28
Quote from: nevaenuf on Thu, 08 August 2019, 07:28:15
No love for an accompanying numpad?  I'd love to see that!
LOL, i thought people love that
I'd love a matching numpad but at this point I'm so used to never seeing it happen that I never ask 😭

I have a numpad designed when i run the buy for Equalz Mountain,but you know mountain is 100% board so it doesnt need a matching numpad.

Logged

Offline warmsoda

  • Posts: 11
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #85 on: Thu, 08 August 2019, 21:52:25 »
Absolutely in for this! WK all the way.
Logged

Offline bthezebra

  • Posts: 464
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #86 on: Thu, 08 August 2019, 22:40:49 »
Quote from: C³—Ears on Thu, 08 August 2019, 21:41:11
Quote from: iaman on Thu, 08 August 2019, 11:14:06
Quote from: C³—Ears on Thu, 08 August 2019, 11:01:28
Quote from: nevaenuf on Thu, 08 August 2019, 07:28:15
No love for an accompanying numpad?  I'd love to see that!
LOL, i thought people love that
I'd love a matching numpad but at this point I'm so used to never seeing it happen that I never ask

I have a numpad designed when i run the buy for Equalz Mountain,but you know mountain is 100% board so it doesnt need a matching numpad.

Show Image

So polycarbonate numpad with a screen???
Logged

Offline temp0321

  • Posts: 37
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #87 on: Thu, 08 August 2019, 23:35:37 »
Are there any universal pcb that would fit this left corner usb pcb?
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #88 on: Fri, 09 August 2019, 02:12:47 »
Quote from: temp0321 on Thu, 08 August 2019, 23:35:37
Are there any universal pcb that would fit this left corner usb pcb?
What do you mean? I am totally lost here...
Logged

Offline temp0321

  • Posts: 37
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #89 on: Fri, 09 August 2019, 03:22:42 »
Quote from: C³—Ears on Fri, 09 August 2019, 02:12:47
Quote from: temp0321 on Thu, 08 August 2019, 23:35:37
Are there any universal pcb that would fit this left corner usb pcb?
What do you mean? I am totally lost here...

I was just wondering if there are any universal pcbs like h87a that fit certain tkl keyboards.
Logged

Offline funderburker

  • * Exquisite Elder
  • Posts: 1396
  • Location: Latvia, Riga
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #90 on: Fri, 09 August 2019, 05:06:08 »
Quote from: temp0321 on Fri, 09 August 2019, 03:22:42
Quote from: C³—Ears on Fri, 09 August 2019, 02:12:47
Quote from: temp0321 on Thu, 08 August 2019, 23:35:37
Are there any universal pcb that would fit this left corner usb pcb?
What do you mean? I am totally lost here...

I was just wondering if there are any universal pcbs like h87a that fit certain tkl keyboards.

em... H87a is probably the most "universal" TKL pcb there is right now. H87a page links to a compatibility chart and mentions boards that aren't compatible (it won't work with commercial TKL boards).

That said - I have no idea if H87a PCB will work (more like fit) with C3 boards. It probably doesn't really matter as LDN series PCB has USB-C, RGB lighting and is fully programmable. Even googled a bit (c'mon guys, do a bit of research before asking questions) and it looks like LDN TKL pcbs support all the usual layouts (WK/WKL/ISO/split backspace).
Logged
Keyboard design by Skepur

My boards: TMO50 FE:06 | LAGOM Groda-T | TMOv2 R1 prototype | Onyx FRL TKL prototype | Stege TKL prototype | Ellipse prototype | Cyberstar

Offline fuzzybaffy

  • Posts: 553
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #91 on: Sat, 10 August 2019, 03:53:46 »
Will you have limited stock, or will you take all orders during the GB?
Logged

Offline im_hide

  • Posts: 38
  • Location: St Louis, MO
  • dont think
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit
« Reply #92 on: Sat, 10 August 2019, 04:54:11 »
Quote from: fuzzybaffy on Sat, 10 August 2019, 03:53:46
Will you have limited stock, or will you take all orders during the GB?

I think you'll find your answer here:

Quote from: C³—Ears on Tue, 06 August 2019, 10:29:06
Quote from: sl70309 on Tue, 06 August 2019, 07:39:39
is quantity limited?
No limited. But i think if i put a limit on it it would sell more……lol
Logged

Offline fuzzybaffy

  • Posts: 553
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #93 on: Sat, 10 August 2019, 04:55:04 »
Oh whoops. My bad! I know I've read that answer before, I just didn't remember when I asked. Thanks.
Logged

Offline C³—Ears

  • Thread Starter
  • Posts: 401
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #94 on: Sat, 10 August 2019, 08:46:34 »
New nameplate/badege:
Logged

Offline Capsy

  • Posts: 346
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #95 on: Sat, 10 August 2019, 08:58:51 »
Quote from: C³—Ears on Sat, 10 August 2019, 08:46:34
New nameplate/badege:
Show Image

Very cool
Logged

Offline Rob27shred

  • Posts: 1492
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit
« Reply #96 on: Sat, 10 August 2019, 09:10:55 »
Quote from: funderburker on Tue, 06 August 2019, 07:54:52
Quote from: YellowHalo on Tue, 06 August 2019, 07:51:14
Is the plate design a prototype or final? It looked like it could only accept stepped caps lock.

The only way it should be.

+1
Logged

Offline bthezebra

  • Posts: 464
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #97 on: Sat, 10 August 2019, 09:15:24 »
Logged

Offline cemoon

  • Posts: 66
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #98 on: Sat, 10 August 2019, 09:16:58 »
Quote from: C³—Ears on Sat, 10 August 2019, 08:46:34
New nameplate/badege:
Show Image

I like the Ancient letter one better
Logged

Offline im_hide

  • Posts: 38
  • Location: St Louis, MO
  • dont think
Re: [IC] Equalz Zer0.9 Polycarbonate 80%Kit(GB start next week)
« Reply #99 on: Sat, 10 August 2019, 09:22:08 »
Quote from: cemoon on Sat, 10 August 2019, 09:16:58
Quote from: C³—Ears on Sat, 10 August 2019, 08:46:34
New nameplate/badege:
Show Image

I like the Ancient letter one better

I think they're both insanely pleasing to look at.
Logged
Pages: « 1 [2] 3 »  All   Go Up
« previous next »