Author Topic: [GB]Theo 60% custome keyboard (invoice check) (Read 59362 times)

wylie · « **on:** Tue, 10 December 2019, 09:00:34 »

Hi geekhack,

Groupbuy for - Theo60.

This is the first time that I am sharing my personal design.I thought about what would make my perfect keyboard? With a few ideas in
mind, below is some pictures

Some details about this keyboard : (IC:https://geekhack.org/index.php?topic=101403.0)

Top case : Four kinds of top case https://i.imgur.com/r9OAxPs.png .

（alu/ pc/brass pvd /brass sand finish.You can mix choices,we have brass top and bottom to

choose.）

Default kit:
Aluminum/PC/ top and bottom cases

Aluminum/PC/ plate

QMK PCB with type-C

Aluminum/PC/ bottom

O- rubber (two types), screws, custom box

Price for default kit: $280 excluding PayPal fee and shipping
Solder PCB: add HHKB layout

Hotswap pcb :

Alps :

layout 3:

Mounting. :

The plate is mounted to the top case with the 'O- rubber '

Do not like "Gasket" mount, we have the 'O-rubber' Cutout,when the 'O-rubber' put on the top & bottom of the case. the plate will

experience a stronger or lighter clamping force.When you type through the plate will get fedback from bottom due to the 'O

-rubber get press .we will provide two types O-rubber for free.

More

Typing test :

Groupbuy open :10th Dec - 15th Dec (30units)

Groupbuy payment :deadline 20th Dec

ETA :early April 2020 shipping cost $45-$50(invoice will send when start shpping)

Mcnos · « **Reply #1 on:** Tue, 10 December 2019, 22:31:15 »

What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk

Warrenified · « **Reply #2 on:** Tue, 10 December 2019, 22:39:38 »

Submitted my order!

Thanks! I added you on discord in case I need to change my form if I was in the first 30!

aslanxdeft · « **Reply #3 on:** Wed, 11 December 2019, 03:11:11 »

Are there any examples of the other colors?

modeseven · « **Reply #4 on:** Wed, 11 December 2019, 05:54:51 »

Quote from: Mcnos on Tue, 10 December 2019, 22:31:15

What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk

He mentioned 6 degrees in the past. Also interested in seeing side profile and front height.

wylie · « **Reply #5 on:** Wed, 11 December 2019, 08:48:29 »

Quote from: aslanxdeft on Wed, 11 December 2019, 03:11:11

Are there any examples of the other colors?

aslanxdeft · « **Reply #6 on:** Wed, 11 December 2019, 10:50:44 »

Quote from: wylie on Wed, 11 December 2019, 08:48:29

Quote from: aslanxdeft on Wed, 11 December 2019, 03:11:11
Are there any examples of the other colors?

Show Image

Thanks! Is the top color "e pink"?

gnhuy91 · « **Reply #7 on:** Wed, 11 December 2019, 12:07:43 »

In for an Alps version, I hope Alps switch legs would not touch the bottom of the case like Leaf60

kaz_kitty · « **Reply #8 on:** Wed, 11 December 2019, 15:21:16 »

Submitted for a full PC, most likely won't get it though...Is it even a GB when there is only 30 units?

DukeEsquire · « **Reply #9 on:** Wed, 11 December 2019, 17:00:57 »

Quote from: kaz_kitty on Wed, 11 December 2019, 15:21:16

Submitted for a full PC, most likely won't get it though...Is it even a GB when there is only 30 units?

You want caps for first time GB runners.

You don't want someone whose in over their heads.

nasp · « **Reply #10 on:** Wed, 11 December 2019, 17:07:43 »

Quote from: DukeEsquire on Wed, 11 December 2019, 17:00:57

Quote from: kaz_kitty on Wed, 11 December 2019, 15:21:16
Submitted for a full PC, most likely won't get it though...Is it even a GB when there is only 30 units?

You want caps for first time GB runners.

You don't want someone whose in over their heads.

Agreed. And 30 is a good number.

sumbody · « **Reply #11 on:** Wed, 11 December 2019, 17:51:35 »

Submitted for a full PC board. Good luck to the rest in the GB.

Felt · « **Reply #12 on:** Wed, 11 December 2019, 18:39:13 »

Just submitted. Has the 30 units already been reached?

Skeezy · « **Reply #13 on:** Wed, 11 December 2019, 20:12:46 »

Just filled out the form.

When will we be notified if we got in or not?

Little4Real · « **Reply #14 on:** Wed, 11 December 2019, 23:57:40 »

Will a standard 60% PCB fit?

aslanxdeft · « **Reply #15 on:** Thu, 12 December 2019, 06:58:35 »

Quote from: Skeezy on Wed, 11 December 2019, 20:12:46

Just filled out the form.

When will we be notified if we got in or not?

It's fcfs so I guess if you filled out the form you got it.

wylie · « **Reply #16 on:** Thu, 12 December 2019, 08:43:56 »

Quote from: Skeezy on Wed, 11 December 2019, 20:12:46

Just filled out the form.

When will we be notified if we got in or not?

we will send invioce when the gb form closed by the time,and if you have received and paid, you are in .if not,we will move to next members.thank you.

wylie · « **Reply #17 on:** Thu, 12 December 2019, 08:44:20 »

Quote from: Little4Real on Wed, 11 December 2019, 23:57:40

Will a standard 60% PCB fit?

not fit.

wylie · « **Reply #18 on:** Thu, 12 December 2019, 08:46:08 »

Quote from: Mcnos on Tue, 10 December 2019, 22:31:15

What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk

side view:

gnhuy91 · « **Reply #19 on:** Thu, 12 December 2019, 11:27:14 »

Quote from: wylie on Thu, 12 December 2019, 08:46:08

Quote from: Mcnos on Tue, 10 December 2019, 22:31:15
What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk
side view:

Show Image

Have you tried Alps on this prototype? I asked because the switch legs is longer than mx and may touch the bottom case, happened to Leaf60

wylie · « **Reply #20 on:** Fri, 13 December 2019, 06:42:39 »

Quote from: gnhuy91 on Thu, 12 December 2019, 11:27:14

Quote from: wylie on Thu, 12 December 2019, 08:46:08
Quote from: Mcnos on Tue, 10 December 2019, 22:31:15
What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk
side view:

Show Image

Have you tried Alps on this prototype? I asked because the switch legs is longer than mx and may touch the bottom case, happened to Leaf60

yes,I will try again

wylie · « **Reply #21 on:** Fri, 13 December 2019, 06:44:20 »

I will start sending invoice. If you have any questions, please pm me （or discord）.

kaz_kitty · « **Reply #22 on:** Fri, 13 December 2019, 09:08:41 »

Paid and hyped, can't wait to receive it

sumbody · « **Reply #23 on:** Fri, 13 December 2019, 09:54:32 »

Quote from: wylie on Fri, 13 December 2019, 06:44:20

I will start sending invoice. If you have any questions, please pm me （or discord）.

All paid up and sent you a PM

Can't wait!

gnhuy91 · « **Reply #24 on:** Fri, 13 December 2019, 10:55:29 »

Paid for mine too, Alps build with extra PCB + mx PC plate so I can swap between alps and mx

Felt · « **Reply #25 on:** Fri, 13 December 2019, 12:24:06 »

Just paid! Love the simplicity of this board and different mounting style, cant wait!

Mcnos · « **Reply #26 on:** Fri, 13 December 2019, 12:32:55 »

Sent a PM about my order

modeseven · « **Reply #27 on:** Fri, 13 December 2019, 14:19:24 »

In the pictures there seems to be a pretty large gap between the WKL blockers and the ALT keys. Do you know if this will be changed or is this the final design?

Warrenified · « **Reply #28 on:** Fri, 13 December 2019, 18:20:09 »

Hi! I wanted to add a PC plate to my invoice. I’ve PM’d you on discord and Geekhack just in case. Thank you!

sumbody · « **Reply #29 on:** Fri, 13 December 2019, 18:23:19 »

Anyone has an idea how heavy will a full PC build be?
Which one is the weight in the keyboard? Can't seem to make out the component from the images.

nasp · « **Reply #30 on:** Fri, 13 December 2019, 20:51:20 »

Check out the fourth image. It's the one with the white Theo on its back. That red piece is the "weight". It's more of an accent really.

sumbody · « **Reply #31 on:** Fri, 13 December 2019, 21:59:32 »

Quote from: nasp on Fri, 13 December 2019, 20:51:20

Check out the fourth image. It's the one with the white Theo on its back. That red piece is the "weight". It's more of an accent really.

I expect the full PC to be really light I guess, perfect for a travel board

wylie · « **Reply #32 on:** Sat, 14 December 2019, 01:10:10 »

Quote from: modeseven on Fri, 13 December 2019, 14:19:24

In the pictures there seems to be a pretty large gap between the WKL blockers and the ALT keys. Do you know if this will be changed or is this the final design?

it will change,this is just prototype

wylie · « **Reply #33 on:** Sat, 14 December 2019, 01:10:59 »

3 requests cancelled the order.

wylie · « **Reply #34 on:** Sat, 14 December 2019, 01:11:46 »

Quote from: Warrenified on Fri, 13 December 2019, 18:20:09

Hi! I wanted to add a PC plate to my invoice. I’ve PM’d you on discord and Geekhack just in case. Thank you!

check.

wylie · « **Reply #35 on:** Sun, 15 December 2019, 21:46:36 »

Quote from: wylie on Tue, 10 December 2019, 09:00:34

Hi geekhack,

Groupbuy for - Theo60.

This is the first time that I am sharing my personal design.I thought about what would make my perfect keyboard? With a few ideas in
mind, below is some pictures

Show Image

Show Image

Show Image

Show Image

Show Image

Some details about this keyboard : (IC:https://geekhack.org/index.php?topic=101403.0)

Top case : Four kinds of top case https://i.imgur.com/r9OAxPs.png .

（alu/ pc/brass pvd /brass sand finish.You can mix choices,we have brass top and bottom to

choose.）

Default kit:
Aluminum/PC/ top and bottom cases

Aluminum/PC/ plate

QMK PCB with type-C

Aluminum/PC/ bottom

O- rubber (two types), screws, custom box

Price for default kit: $280 excluding PayPal fee and shipping
Solder PCB: add HHKB layout
Show Image

Hotswap pcb :

Show Image

Alps :

Show Image

layout 3:

Show Image

Mounting. :

Show Image

The plate is mounted to the top case with the 'O- rubber '

Do not like "Gasket" mount, we have the 'O-rubber' Cutout,when the 'O-rubber' put on the top & bottom of the case. the plate will

experience a stronger or lighter clamping force.When you type through the plate will get fedback from bottom due to the 'O

-rubber get press .we will provide two types O-rubber for free.

More
Show Image

Typing test :

Groupbuy open :10th Dec - 15th Dec (30units)

Groupbuy payment :deadline 20th Dec

ETA :early April 2020 shipping cost $45-$50(invoice will send when start shpping)

Tamkarm · « **Reply #36 on:** Mon, 16 December 2019, 13:39:03 »

Sent a PM

jacky · « **Reply #37 on:** Tue, 17 December 2019, 10:19:58 »

regionfree · « **Reply #38 on:** Wed, 18 December 2019, 17:54:48 »

finally settled my invoice!

wylie · « **Reply #39 on:** Thu, 19 December 2019, 04:25:50 »

All invoices have been sent for a few days,please check it,if have any question pm me.(deadline is on 20th Dec.)

nasp · « **Reply #40 on:** Fri, 27 December 2019, 21:31:00 »

Hello sir,

Can you please send the plate file? I'd like to use this board with a custom layout.

Thanks

aslanxdeft · « **Reply #41 on:** Wed, 08 January 2020, 07:08:01 »

Any updates ?

wylie · « **Reply #42 on:** Wed, 08 January 2020, 21:25:12 »

Quote from: aslanxdeft on Wed, 08 January 2020, 07:08:01

Any updates ?

waiting for new prototype make confirmed.

sumbody · « **Reply #43 on:** Tue, 21 January 2020, 08:47:49 »

Are we on track for April 2020 release still?

aslanxdeft · « **Reply #44 on:** Sun, 02 February 2020, 06:29:00 »

Any news on the prototype?

Vireca · « **Reply #45 on:** Sun, 02 February 2020, 10:30:27 »

GB before prototype? wew

nasp · « **Reply #46 on:** Mon, 03 February 2020, 21:32:07 »

Quote from: Vireca on Sun, 02 February 2020, 10:30:27

GB before prototype? wew

No, he has a typing test video in the OP

regionfree · « **Reply #47 on:** Mon, 24 February 2020, 09:59:29 »

Any update on this?

aslanxdeft · « **Reply #48 on:** Mon, 24 February 2020, 12:16:03 »

Quote from: regionfree on Mon, 24 February 2020, 09:59:29

Any update on this?

He replied to my Pm on the 15th. He said that he is still waiting on a government annoucement but would keep everyone updated.

regionfree · « **Reply #49 on:** Mon, 24 February 2020, 18:23:23 »

Quote from: aslanxdeft on Mon, 24 February 2020, 12:16:03

He replied to my Pm on the 15th. He said that he is still waiting on a government annoucement but would keep everyone updated.

thanks for sharing. does he have a discord server for updates? or it might be nice to have updates posted in the thread. worried about this GB, and my 6-month paypal protection limit is closing in.

aslanxdeft · « **Reply #50 on:** Mon, 24 February 2020, 20:24:56 »

Quote from: regionfree on Mon, 24 February 2020, 18:23:23

Quote from: aslanxdeft on Mon, 24 February 2020, 12:16:03
He replied to my Pm on the 15th. He said that he is still waiting on a government annoucement but would keep everyone updated.

thanks for sharing. does he have a discord server for updates? or it might be nice to have updates posted in the thread. worried about this GB, and my 6-month paypal protection limit is closing in.

not afaik. I'm also a bit worried with the paypal protection and this seemingly being his first gb on here :/

wylie · « **Reply #51 on:** Mon, 24 February 2020, 23:00:37 »

the cnc factory started working at the end of this month.sorry the update is a bit delayed.if have any new progress, i will keep updating.discord me or pm if you have any question.thank you.

aslanxdeft · « **Reply #52 on:** Tue, 25 February 2020, 06:54:39 »

Quote from: wylie on Mon, 24 February 2020, 23:00:37

the cnc factory started working at the end of this month.sorry the update is a bit delayed.if have any new progress, i will keep updating.discord me or pm if you have any question.thank you.

Much love. Ty for the update

Felt · « **Reply #53 on:** Sun, 15 March 2020, 20:41:34 »

Any update on this?

wylie · « **Reply #54 on:** Tue, 17 March 2020, 02:43:31 »

just got the photos and still work on the top part,will keep update.

aslanxdeft · « **Reply #55 on:** Tue, 17 March 2020, 08:33:22 »

Quote from: wylie on Tue, 17 March 2020, 02:43:31

Show Image

just got the photos and still work on the top part,will keep update.

Any estimate on shipping?

Felt · « **Reply #56 on:** Tue, 17 March 2020, 09:34:12 »

looking good!

aslanxdeft · « **Reply #57 on:** Fri, 03 April 2020, 08:44:00 »

Any news?

wylie · « **Reply #58 on:** Fri, 03 April 2020, 13:34:16 »

hi there,factory still working, just got a new prototype and fix the gap.
https://imgur.com/gV5yvTH
https://imgur.com/VhbSF3o

Felt · « **Reply #59 on:** Fri, 03 April 2020, 15:08:53 »

Wow, the board looks super good. Any estimates on ETA?

pchoi · « **Reply #60 on:** Fri, 03 April 2020, 23:58:02 »

Any chance there is an extra polycarbonate hhkb that I can get my hands on?

kaz_kitty · « **Reply #61 on:** Sun, 05 April 2020, 17:44:45 »

Selling my spot for a full PC full 60% kit, hit me up

pchoi · « **Reply #62 on:** Sun, 05 April 2020, 17:47:41 »

Quote from: kaz_kitty on Sun, 05 April 2020, 17:44:45

Selling my spot for a full PC full 60% kit, hit me up

If it was a polycarb HHKB I would be all over it. GLWS

wylie · « **Reply #63 on:** Sat, 25 April 2020, 02:39:48 »

is still need some time, but once these are completed. the anode will be very fast.will continue to update.any questions please pm me.still thank you all.

Felt · « **Reply #64 on:** Sat, 09 May 2020, 03:36:06 »

Quote from: wylie on Sat, 25 April 2020, 02:39:48

Show Image

is still need some time, but once these are completed. the anode will be very fast.will continue to update.any questions please pm me.still thank you all.

Those look great:D any word if the anodizing has started? Just asking because the first post say ETA early April...

aslanxdeft · « **Reply #65 on:** Sun, 10 May 2020, 13:59:23 »

Quote from: Felt on Sat, 09 May 2020, 03:36:06

Quote from: wylie on Sat, 25 April 2020, 02:39:48
Show Image

is still need some time, but once these are completed. the anode will be very fast.will continue to update.any questions please pm me.still thank you all.

Those look great:D any word if the anodizing has started? Just asking because the first post say ETA early April...

Corona happened :blank:

Felt · « **Reply #66 on:** Sun, 10 May 2020, 15:54:35 »

Quote from: aslanxdeft on Sun, 10 May 2020, 13:59:23

Quote from: Felt on Sat, 09 May 2020, 03:36:06
Quote from: wylie on Sat, 25 April 2020, 02:39:48
Show Image

is still need some time, but once these are completed. the anode will be very fast.will continue to update.any questions please pm me.still thank you all.

Those look great:D any word if the anodizing has started? Just asking because the first post say ETA early April...
Corona happened :blank:

I'm aware, just wondering if there is a new ETA posted anywhere...?

wylie · « **Reply #67 on:** Sun, 17 May 2020, 01:21:16 »

just received the box,

production will be completed in a few days.

kabocha · « **Reply #68 on:** Sun, 17 May 2020, 01:23:21 »

Exciting! Looking forward to the board

gnhuy91 · « **Reply #69 on:** Sun, 17 May 2020, 10:10:39 »

Quote from: wylie on Sun, 17 May 2020, 01:21:16

just received the box, production will be completed in a few days.

could you share the plate files so I can prepare a custom plate ahead? thanks

nasp · « **Reply #70 on:** Sat, 06 June 2020, 19:48:50 »

Any update available?

Felt · « **Reply #71 on:** Mon, 08 June 2020, 15:18:55 »

I would also appreciate an update!!

thestateofmay · « **Reply #72 on:** Mon, 08 June 2020, 16:00:02 »

Sucks that I'm late. Is this going to go for round 2? Would love to get one.

wylie · « **Reply #73 on:** Tue, 09 June 2020, 02:18:50 »

all production is finished and waiting for anode.

eriatilox · « **Reply #74 on:** Tue, 09 June 2020, 02:50:15 »

iirc I ordered a hotswap pcb. Now that I see this again, I'm not sure about the layout. I thought hotswap pcb will have a fixed layout but the diagram shows multiple layout. So, what will I get for the hotswap pcb?

Sent from my Mi MIX 3 using Tapatalk

aslanxdeft · « **Reply #75 on:** Tue, 09 June 2020, 09:45:05 »

Quote from: eriatilox on Tue, 09 June 2020, 02:50:15

iirc I ordered a hotswap pcb. Now that I see this again, I'm not sure about the layout. I thought hotswap pcb will have a fixed layout but the diagram shows multiple layout. So, what will I get for the hotswap pcb?

Sent from my Mi MIX 3 using Tapatalk

You will only be able to choose between split bs and a different bottom row.

eriatilox · « **Reply #76 on:** Tue, 09 June 2020, 09:55:33 »

Quote from: aslanxdeft on Tue, 09 June 2020, 09:45:05

Quote from: eriatilox on Tue, 09 June 2020, 02:50:15
iirc I ordered a hotswap pcb. Now that I see this again, I'm not sure about the layout. I thought hotswap pcb will have a fixed layout but the diagram shows multiple layout. So, what will I get for the hotswap pcb?

Sent from my Mi MIX 3 using Tapatalk
You will only be able to choose between split bs and a different bottom row.

How does that work? I've never seen a hotswap pcb that support both split bs and full bs or different bottom row.

Sent from my Mi MIX 3 using Tapatalk

wylie · « **Reply #77 on:** Tue, 09 June 2020, 10:02:42 »

Quote from: eriatilox on Tue, 09 June 2020, 09:55:33

Quote from: aslanxdeft on Tue, 09 June 2020, 09:45:05
Quote from: eriatilox on Tue, 09 June 2020, 02:50:15
iirc I ordered a hotswap pcb. Now that I see this again, I'm not sure about the layout. I thought hotswap pcb will have a fixed layout but the diagram shows multiple layout. So, what will I get for the hotswap pcb?

Sent from my Mi MIX 3 using Tapatalk
You will only be able to choose between split bs and a different bottom row.
How does that work? I've never seen a hotswap pcb that support both split bs and full bs or different bottom row.

Sent from my Mi MIX 3 using Tapatalk

hotswap only support split bs,not full bs.

eriatilox · « **Reply #78 on:** Tue, 09 June 2020, 10:06:17 »

Quote from: wylie on Tue, 09 June 2020, 10:02:42

Quote from: eriatilox on Tue, 09 June 2020, 09:55:33
Quote from: aslanxdeft on Tue, 09 June 2020, 09:45:05
Quote from: eriatilox on Tue, 09 June 2020, 02:50:15
iirc I ordered a hotswap pcb. Now that I see this again, I'm not sure about the layout. I thought hotswap pcb will have a fixed layout but the diagram shows multiple layout. So, what will I get for the hotswap pcb?

Sent from my Mi MIX 3 using Tapatalk
You will only be able to choose between split bs and a different bottom row.
How does that work? I've never seen a hotswap pcb that support both split bs and full bs or different bottom row.

Sent from my Mi MIX 3 using Tapatalk
hotswap only support split bs,not full bs.

what about bottom row? Is it the 7u spacebar one?

edit: just got the answer in the pm. Thanks!

Sent from my Mi MIX 3 using Tapatalk

kaz_kitty · « **Reply #79 on:** Tue, 09 June 2020, 20:29:52 »

Quote from: thestateofmay on Mon, 08 June 2020, 16:00:02

Sucks that I'm late. Is this going to go for round 2? Would love to get one.

If you want you can get mine, full polycarb full 60% let me know

wylie · « **Reply #80 on:** Mon, 22 June 2020, 02:29:33 »

part of the anode work is completed.also need to wait for the PCB to complete.
the next update is to start shipping

（wylie#4171）

aslanxdeft · « **Reply #81 on:** Mon, 22 June 2020, 09:25:39 »

Quote from: wylie on Mon, 22 June 2020, 02:29:33

part of the anode work is completed.also need to wait for the PCB to complete.
the next update is to start shipping
（wylie#4171）

Awesome news. You happen to have an estimate on shipping?

Felt · « **Reply #82 on:** Mon, 13 July 2020, 09:07:58 »

Are things going well here?

Excited to get my hands on this one!

wylie · « **Reply #83 on:** Wed, 15 July 2020, 13:43:36 »

will ship in a few days. If you want to change the address, please PM me on discord（wylie#4171）,usually not online here.
for theo60 customers（After-sales service feedback Or other things）:https://discord.gg/PnhFHR6

Felt · « **Reply #84 on:** Thu, 16 July 2020, 13:57:40 »

Awesome:) will we get emailed the shipping confirmation? Tracking num?

wylie · « **Reply #85 on:** Sat, 08 August 2020, 07:54:57 »

all invoices have been sent.and i need phone number,I did’t see them on the paypal page,so discord me.(phone number and paypal account),thank you.

titanium · « **Reply #86 on:** Sat, 08 August 2020, 08:59:42 »

Little4Real · « **Reply #87 on:** Wed, 19 August 2020, 19:07:05 »

Will any extras/B-stock be available?

Little4Real · « **Reply #88 on:** Wed, 19 August 2020, 19:10:03 »

Quote from: kaz_kitty on Sun, 05 April 2020, 17:44:45

Selling my spot for a full PC full 60% kit, hit me up

Spot still available?

ludd3 · « **Reply #89 on:** Sun, 12 September 2021, 18:19:54 »

any updates on this ?

aslanxdeft · « **Reply #90 on:** Sun, 12 September 2021, 21:10:50 »

Quote from: ludd3 on Sun, 12 September 2021, 18:19:54

any updates on this ?

wdym it already shipped lol

nasp · « **Reply #91 on:** Sun, 12 September 2021, 23:47:06 »

Yes. I've had mine for months.

News:

Author Topic: [GB]Theo 60% custome keyboard (invoice check) (Read 59362 times)