Author Topic: [IC] Elite - F13 TKL (proto arrived to me !!!)  (Read 41656 times)

0 Members and 1 Guest are viewing this topic.

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
[IC] Elite - F13 TKL (proto arrived to me !!!)
« on: Sat, 20 March 2021, 23:05:24 »

:cool:
ELITE
F13, TOP/GUMMY MOUNT TKL ºΔº


IC FORM



PICTURES
Proto Pictures






(updated engravings because wasn't satisfied with interior ones)










old engravings

More





DETAILS

  • 35 units (after calliope)
  • 5.3° angle
  • 17.4mm front height (bottom of keycap to bottom of keyboard)
  • top/gummy mount
  • wakipai energy


SOCIALS

DISCORD
INSTAGRAM


« Last Edit: Wed, 19 May 2021, 20:07:02 by yoot »

Offline BapoDonu

  • Posts: 309
Re: [IC] Elite - F13 TKL
« Reply #1 on: Sat, 20 March 2021, 23:06:15 »
Dear yoot.
It may have already been brought to light, that the community is unsatisfied with the current state of this tenkeyless board.
Their main concerns is the engravings and name. They feel as if you are simply using it as a way to capitalize off the current popularity of the v-tuber organization known as Hololive. I, to some extend, agree with this.

While I do believe it is acceptable to make a board inspired by your favorite v-tubers, doing so consecutively without any clear link between the board and the v-tuber will arouse suspicion as to whether you are truly doing this due to passion for the keyboard community and the v-tuber your board is representing, or simply doing it for your own gain.

Although I do see the idea of making a series of v-tuber inspired keyboards, I would highly advise you to reconsider the direction the design of this board is heading in. Either you should directly link it to a v-tuber with clean engravings, or remove any current resemblance, and simply run the board as a standalone group-buy.

Either way, I do believe the board has the potential to turn out well.
Best of luck.
« Last Edit: Sun, 21 March 2021, 11:51:23 by BapoDonu »

Offline of_sam

  • Posts: 272
  • Location: United States
Re: [IC] Elite - F13 TKL
« Reply #2 on: Sat, 20 March 2021, 23:06:20 »
Change the engravings
Typing on: HHKB Pro 2 - Stock :aware:
Collection: F1.69, Police, Jubi, RF 87U, En Dash, Rosenthal, Soulless, Frog, Calliope, GAF 910, Sabre, W1-AT

Offline Baka Bot

  • Posts: 220
  • Location: idk somewhere in the Western Hemisphere
Re: [IC] Elite - F13 TKL
« Reply #3 on: Sat, 20 March 2021, 23:08:19 »
My Body Is ****ing Ready!!!!

Offline Qarmaa

  • Posts: 111
  • Location: St. Petersburg, Russia
Re: [IC] Elite - F13 TKL
« Reply #4 on: Sat, 20 March 2021, 23:09:13 »
Fix the engravings
« Last Edit: Mon, 26 April 2021, 06:32:23 by Qarmaa »

Offline qats

  • Posts: 36
Re: [IC] Elite - F13 TKL
« Reply #5 on: Sat, 20 March 2021, 23:09:17 »
Ayo this is kinda lit doe

Offline skrunk

  • Posts: 63
Re: [IC] Elite - F13 TKL
« Reply #6 on: Sat, 20 March 2021, 23:09:22 »
Love the design on this, will be looking forward to this board.
Past Keyboards : LZ CLS, Unikorn, Noxary X65, KFE CE, HHKB Pro2, Realforce TKL

Current Keyboards: FC660C, HHKB Pro1, GSKT-00

Offline Bunn3y

  • Posts: 73
  • Location: Perth, Western Australia
Re: [IC] Elite - F13 TKL
« Reply #7 on: Sat, 20 March 2021, 23:09:28 »
nice one motherFAQer!!
Typing on: Switchplate iiA Sanction TKL - Gateron X (51.5g Gon springs) - full alu - GMK Dolch R5

Collection: Ivery Praxis || HHKB Pro 2 || JTD.Works Ovinnik || Realforce R1 87u || Switchplate iiA Sanction

Offline Shoobs

  • Posts: 19
Re: [IC] Elite - F13 TKL
« Reply #8 on: Sat, 20 March 2021, 23:09:35 »
Very Cultured

Offline 7h3of7

  • Posts: 49
  • Location: United States
Re: [IC] Elite - F13 TKL
« Reply #9 on: Sat, 20 March 2021, 23:10:11 »
I said stupid thing.
I regret saying stupid thing.
« Last Edit: Sun, 10 October 2021, 22:31:00 by 7h3of7 »
Current Board: OTD 356 Mini v1 Black

Offline nu_types

  • Formerly Iredeus
  • Posts: 477
  • Location: North Carolina
Re: [IC] Elite - F13 TKL
« Reply #10 on: Sat, 20 March 2021, 23:10:42 »
Yoot, please, my wallet can only take so much abuse.

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #11 on: Sat, 20 March 2021, 23:11:15 »
What about this is a Miko board? You have weight engravings and that seems like its it.
Between the calliope and this, it kind of feels like you're using their names as a cash grab.
:eek:

Offline Lil

  • Posts: 272
    • designedbydark
Re: [IC] Elite - F13 TKL
« Reply #12 on: Sat, 20 March 2021, 23:13:04 »
What about this is a Miko board? You have weight engravings and that seems like its it.
Between the calliope and this, it kind of feels like you're using their names as a cash grab.


Offline engyshow

  • Posts: 32
Re: [IC] Elite - F13 TKL
« Reply #13 on: Sat, 20 March 2021, 23:13:38 »
 :cool: Elite 35p

Offline mawli

  • Posts: 21
Re: [IC] Elite - F13 TKL
« Reply #14 on: Sat, 20 March 2021, 23:14:15 »
Faq u ❤️

Offline Agilr

  • Posts: 369
  • Location: Sydney, Australia
  • Never stop achieving
    • Discord Server
Re: [IC] Elite - F13 TKL
« Reply #15 on: Sat, 20 March 2021, 23:16:48 »
:AmeliaStare:

Offline meiosis

  • * Esteemed Elder
  • Posts: 1281
  • Location: 408
  • Time
Re: [IC] Elite - F13 TKL
« Reply #16 on: Sat, 20 March 2021, 23:17:37 »


Already got the miko pad so where do I get the board
Keyboards:
Filco Majestouch 2 - Sakura Edition [MX Blue]
Filco Majestouch 2 - Lotus Edition [MX Brown]
Realforce 23ub - Modded with 55g Domes.
Aripeko TKL

Offline 7h3of7

  • Posts: 49
  • Location: United States
Re: [IC] Elite - F13 TKL
« Reply #17 on: Sat, 20 March 2021, 23:18:56 »
What about this is a Miko board? You have weight engravings and that seems like its it.
Between the calliope and this, it kind of feels like you're using their names as a cash grab.
:eek:

I'm not trying to be rude. I know that you love hololive and that the design of the board is cool. But a 35 unit board thats basically just a normal TKL with a couple of extra engravings seems cash-grabby to me.
And by itself, I think its a really cool board, and I like that side profile. But when you put the name as the board's name, the situation kind of changes imo especially consider the number of units.
Current Board: OTD 356 Mini v1 Black

Offline BapoDonu

  • Posts: 309
Re: [IC] Elite - F13 TKL
« Reply #18 on: Sat, 20 March 2021, 23:19:53 »
Show Image


Already got the miko pad so where do I get the board
Can we be friends ? ✨Chomuwu✨#0002

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #19 on: Sat, 20 March 2021, 23:21:19 »
What about this is a Miko board? You have weight engravings and that seems like its it.
Between the calliope and this, it kind of feels like you're using their names as a cash grab.
:eek:

I'm not trying to be rude. I know that you love hololive and that the design of the board is cool. But a 35 unit board thats basically just a normal TKL with a couple of extra engravings seems cash-grabby to me.
And by itself, I think its a really cool board, and I like that side profile. But when you put the name as the board's name, the situation kind of changes imo especially consider the number of units.

kpop boards !!!!!!!

Offline yoniwolf1202

  • Posts: 142
  • Location: Maryland, USA
Re: [IC] Elite - F13 TKL
« Reply #20 on: Sat, 20 March 2021, 23:24:44 »
#stopthecashgrab

Sent from my Pixel 3 using Tapatalk


Offline Sicowa

  • Posts: 151
  • Location: Vancouver, Canada
Re: [IC] Elite - F13 TKL
« Reply #21 on: Sat, 20 March 2021, 23:26:50 »
Please remove the swag engraving.
Collection: Khajit 60, Leopold FC980C, Pepper, Ex. Visa, Daedalus

pfp:https://twitter.com/kuroseP/status/1305179874429079553?s=19

Offline Chippy

  • Posts: 263
  • Location: USA
  • sus chef
Re: [IC] Elite - F13 TKL
« Reply #22 on: Sat, 20 March 2021, 23:28:28 »
please consider removing the engravings.

-everyone
1.2og | Buddy 6xx | Le Fishe V1 Proto | xyz60 Rev2 | Quartermaster | Chimera65 | Satisfaction75 | Realforce 84u | Zenith Z-150 | Realforce 86u | 378
More
This and the swiss cheese keyboard is the next generation of keyboards

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #23 on: Sat, 20 March 2021, 23:29:24 »
please consider removing the engravings.

-everyone
:eek:

Offline Zeelobby

  • Posts: 926
Re: [IC] Elite - F13 TKL
« Reply #24 on: Sat, 20 March 2021, 23:35:14 »
More engravings. Double or triple it up. I don't want a single facing untouched. Plate especially.

Offline yoniwolf1202

  • Posts: 142
  • Location: Maryland, USA
Re: [IC] Elite - F13 TKL
« Reply #25 on: Sat, 20 March 2021, 23:36:25 »
More engravings. Double or triple it up. I don't want a single facing untouched. Plate especially.
Those Windows key blockers also. They need to be covered or else it's a waste

Sent from my Pixel 3 using Tapatalk


Offline kdam39

  • Posts: 36
  • Location: Moon
Re: [IC] Elite - F13 TKL
« Reply #26 on: Sat, 20 March 2021, 23:43:04 »
how many toes need to be succced?

Offline jewleeuhn

  • Posts: 29
Re: [IC] Elite - F13 TKL
« Reply #27 on: Sun, 21 March 2021, 00:19:47 »
since i lost yoot raffle i should have better luck for this
Brutal60 | GS6O | IU | Mc65 | 2.0add

Offline 2QT2BSTR8

  • Posts: 76
  • Location: Australia
Re: [IC] Elite - F13 TKL
« Reply #28 on: Sun, 21 March 2021, 00:20:59 »
Swap the engravings around? Keen either way.

Offline gnaw

  • Posts: 37
  • Location: West Coast
Re: [IC] Elite - F13 TKL
« Reply #29 on: Sun, 21 March 2021, 00:44:47 »
yes please

Offline paulgali

  • Posts: 251
  • Location: Dubai, UAE
    • SKME
Re: [IC] Elite - F13 TKL
« Reply #30 on: Sun, 21 March 2021, 00:53:59 »
What about this is a Miko board? You have weight engravings and that seems like its it.
Between the calliope and this, it kind of feels like you're using their names as a cash grab.


Any truthers in chat?

Offline prettydouchebag

  • Posts: 45
Re: [IC] Elite - F13 TKL
« Reply #31 on: Sun, 21 March 2021, 02:02:58 »
What about this is a Miko board? You have weight engravings and that seems like its it.
Between the calliope and this, it kind of feels like you're using their names as a cash grab.
:eek:

I'm not trying to be rude. I know that you love hololive and that the design of the board is cool. But a 35 unit board thats basically just a normal TKL with a couple of extra engravings seems cash-grabby to me.
And by itself, I think its a really cool board, and I like that side profile. But when you put the name as the board's name, the situation kind of changes imo especially consider the number of units.

kpop boards !!!!!!!

Very much this.

Offline yh

  • Posts: 105
  • hyurinkb
Re: [IC] Elite - F13 TKL
« Reply #32 on: Sun, 21 March 2021, 02:11:00 »
would prefer the engravings on the weight to be swapped, hiragana outside. ºΔº FAQ

Offline godzillq25

  • Posts: 34
  • Location: australia
Re: [IC] Elite - F13 TKL
« Reply #33 on: Sun, 21 March 2021, 03:29:47 »
What about this is a Miko board? You have weight engravings and that seems like its it.
Between the calliope and this, it kind of feels like you're using their names as a cash grab.

the board looks cool would love one, limiting it isnt making it a cash grab, cash grab would make more boards. have u never named a car, boat or anything else before. calm your t*ts
« Last Edit: Sun, 21 March 2021, 03:32:17 by godzillq25 »

Offline shima

  • Posts: 86
  • Location: California
  • keeb weeb
Re: [IC] Elite - F13 TKL
« Reply #34 on: Sun, 21 March 2021, 04:20:15 »
hot  :cool:
boards: anura




Offline bansheetango

  • Posts: 55
Re: [IC] Elite - F13 TKL
« Reply #35 on: Sun, 21 March 2021, 04:31:15 »
The details provided are kinda scarce, tbh. Case materials? Colours? WKL only or WK also? Plates? HS? Lighting, if any?

P.S. If it's a private run or insiders only, just say so or don't post it at all. For someone just browsing this forum, this IC is really weird.
« Last Edit: Sun, 21 March 2021, 04:34:46 by bansheetango »

Offline Nonnegaard

  • Posts: 346
Re: [IC] Elite - F13 TKL
« Reply #36 on: Sun, 21 March 2021, 06:57:23 »
Change the engravings
Hey! At least be nice about it.
Aeon, TGR Jane V2, Dolphin 2021, Gherkin, Model M, 5°, NCR80, M0110-A

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #37 on: Sun, 21 March 2021, 07:03:01 »
The details provided are kinda scarce, tbh. Case materials? Colours? WKL only or WK also? Plates? HS? Lighting, if any?

P.S. If it's a private run or insiders only, just say so or don't post it at all. For someone just browsing this forum, this IC is really weird.
6063 aluminum with brass weight and accent piece, wkl only, plates TBD, no hotswap, no lighting.

Not a private run, 35 units !

Offline Nonnegaard

  • Posts: 346
Re: [IC] Elite - F13 TKL
« Reply #38 on: Sun, 21 March 2021, 07:07:57 »
Dear yoot.
It may have already been brought to light, that the community is unsatisfied with the current state of this tenkeyless board.
Their main concerns is the engravings and name. They feel as if you are simply using it as a way to capitalize off the current popularity of the v-tuber organization known as Hololive. I, to some extend, agree with this.

While I do believe it is acceptable to make a board inspired by your favorite v-tubers, doing so consecutively without any clear link between the board and the v-tuber will arouse suspicion as to whether you are truly doing this due to passion for the keyboard community and the v-tuber your board is representing, or simply doing it for your own gain.

Although I do see the idea of making a series of v-tuber inspired keyboards, I would highly advise you to reconsider the direction the design of this board is heading in. Either you should directly link it to a v-tuber with clean engravings, or remove any current resemblance, and simply run the board as a standalone group-buy.

Either way, I do believe the board has the potential to turn out well.
Best of luck.
Aeon, TGR Jane V2, Dolphin 2021, Gherkin, Model M, 5°, NCR80, M0110-A

Offline GMK83

  • Posts: 101
  • Location: Libertyville
Re: [IC] Elite - F13 TKL
« Reply #39 on: Sun, 21 March 2021, 07:56:14 »
I think it looks good.  Consider me interested  ;D

Offline gilbert

  • Posts: 127
  • Location: Germany
Re: [IC] Elite - F13 TKL
« Reply #40 on: Sun, 21 March 2021, 08:32:49 »
the engravings...
Collection: F1.69, G80-5K, Bliss TKL, Ecliptica, Cypher, Safa S588, Southpaw Fullsize, HHKB Pro2, Zenith G80-1192HAD

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #41 on: Sun, 21 March 2021, 08:33:12 »
Dear yoot.
It may have already been brought to light, that the community is unsatisfied with the current state of this tenkeyless board.
Their main concerns is the engravings and name. They feel as if you are simply using it as a way to capitalize off the current popularity of the v-tuber organization known as Hololive. I, to some extend, agree with this.

While I do believe it is acceptable to make a board inspired by your favorite v-tubers, doing so consecutively without any clear link between the board and the v-tuber will arouse suspicion as to whether you are truly doing this due to passion for the keyboard community and the v-tuber your board is representing, or simply doing it for your own gain.

Although I do see the idea of making a series of v-tuber inspired keyboards, I would highly advise you to reconsider the direction the design of this board is heading in. Either you should directly link it to a v-tuber with clean engravings, or remove any current resemblance, and simply run the board as a standalone group-buy.

Either way, I do believe the board has the potential to turn out well.
Best of luck.
It is directly linked to best shrine maiden with clean, very elite engravings !

Offline Juan.

  • Posts: 39
  • Location: snadland
Re: [IC] Elite - F13 TKL
« Reply #42 on: Sun, 21 March 2021, 08:35:36 »
fix the engravings
rubber cup   

Offline Jacki

  • Posts: 80
  • Location: Denmark
Re: [IC] Elite - F13 TKL
« Reply #43 on: Sun, 21 March 2021, 10:47:29 »
Not a fan of the back weight, i like the side profile though

[img width=267 height=120]https://i.imgur.com/in3VqH2.jpg[/img

Offline andromache

  • Posts: 210
Re: [IC] Elite - F13 TKL
« Reply #44 on: Sun, 21 March 2021, 11:02:58 »
I love Calliope and I will love Elite too. Looking forward to seeing what the color choices will be.

Offline chunkgamergod

  • Posts: 7
  • Location: Florida
  • :)
Re: [IC] Elite - F13 TKL
« Reply #45 on: Sun, 21 March 2021, 11:27:14 »
immaculate work once again king

Offline BapoDonu

  • Posts: 309
Re: [IC] Elite - F13 TKL
« Reply #46 on: Sun, 21 March 2021, 11:51:08 »
 :blank:

Offline P103

  • Posts: 112
  • Location: Pending
Re: [IC] Elite - F13 TKL
« Reply #47 on: Sun, 21 March 2021, 12:30:18 »
Ready for another L.

Offline Nonnegaard

  • Posts: 346
Re: [IC] Elite - F13 TKL
« Reply #48 on: Sun, 21 March 2021, 15:37:52 »
Dear yoot.
It may have already been brought to light, that the community is unsatisfied with the current state of this tenkeyless board.
Their main concerns is the engravings and name. They feel as if you are simply using it as a way to capitalize off the current popularity of the v-tuber organization known as Hololive. I, to some extend, agree with this.

While I do believe it is acceptable to make a board inspired by your favorite v-tubers, doing so consecutively without any clear link between the board and the v-tuber will arouse suspicion as to whether you are truly doing this due to passion for the keyboard community and the v-tuber your board is representing, or simply doing it for your own gain.

Although I do see the idea of making a series of v-tuber inspired keyboards, I would highly advise you to reconsider the direction the design of this board is heading in. Either you should directly link it to a v-tuber with clean engravings, or remove any current resemblance, and simply run the board as a standalone group-buy.

Either way, I do believe the board has the potential to turn out well.
Best of luck.
lmfao
Aeon, TGR Jane V2, Dolphin 2021, Gherkin, Model M, 5°, NCR80, M0110-A

Offline iinko_mk

  • Posts: 272
  • Location: Somewhere over the rainbow
  • Status: broke
Re: [IC] Elite - F13 TKL
« Reply #49 on: Sun, 21 March 2021, 16:17:51 »
random bull**** engravings go?
Code: [Select]
[url=https://geekhack.org/index.php?topic=110839.0][img width=300 height=120]https://i.imgur.com/GKL0Jxi.png[/img][/url]

Offline prettydouchebag

  • Posts: 45
Re: [IC] Elite - F13 TKL
« Reply #50 on: Sun, 21 March 2021, 18:15:57 »
For those who don't FAQ with the engravings and are not going in on it, more for the true 35p(hence the amount of boards produced, smh)

Keep it up, Yoot.

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #51 on: Sun, 21 March 2021, 18:47:01 »
random bull**** engravings go?
ºΔº

Offline Jefff

  • Posts: 159
  • Location: California, USA
    • jlabs.co
Re: [IC] Elite - F13 TKL
« Reply #52 on: Sun, 21 March 2021, 23:18:33 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash-grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.
« Last Edit: Wed, 24 March 2021, 22:33:40 by Jefff »

Offline Brioric

  • Posts: 26
  • Location: Somewhere
Re: [IC] Elite - F13 TKL
« Reply #53 on: Mon, 22 March 2021, 02:11:48 »
Needs more engravings ;)

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #54 on: Mon, 22 March 2021, 07:07:27 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash=grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Offline Xanira

  • Posts: 106
  • Location: bed
Re: [IC] Elite - F13 TKL
« Reply #55 on: Mon, 22 March 2021, 09:04:14 »
the hecc... so much hate... ill take one

Offline prettydouchebag

  • Posts: 45
Re: [IC] Elite - F13 TKL
« Reply #56 on: Mon, 22 March 2021, 10:10:59 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash=grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Yeah, again, I still don't understand how this is a grab, when 'kpop inspired' boards are more and more rampant. Everyone just pulls out their wallets for that. I feel that this is some of the gatekeepers tryna keep the v-tube community separate from this hobby.

And this is coming from a K-pop mech simp myself(praying for RBB)

Offline halocantkb

  • Formerly 'shota_irl'
  • Posts: 120
  • Location: leaf land
Re: [IC] Elite - F13 TKL
« Reply #57 on: Mon, 22 March 2021, 10:30:48 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash=grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Yeah, again, I still don't understand how this is a grab, when 'kpop inspired' boards are more and more rampant. Everyone just pulls out their wallets for that. I feel that this is some of the gatekeepers tryna keep the v-tube community separate from this hobby.

And this is coming from a K-pop mech simp myself(praying for RBB)
i don't think anyone has said that kpop boards aren't cashgrabby

if you're gonna do an inspired board at least actually try to take some design inspiration, instead of "lmao let's just cover generic tkl w/ references"

« Last Edit: Mon, 22 March 2021, 10:32:53 by halocantkb »

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #58 on: Mon, 22 March 2021, 10:44:58 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash=grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Yeah, again, I still don't understand how this is a grab, when 'kpop inspired' boards are more and more rampant. Everyone just pulls out their wallets for that. I feel that this is some of the gatekeepers tryna keep the v-tube community separate from this hobby.

And this is coming from a K-pop mech simp myself(praying for RBB)
i don't think anyone has said that kpop boards aren't cashgrabby

if you're gonna do an inspired board at least actually try to take some design inspiration, instead of "lmao let's just cover generic tkl w/ references"

are you implyhing the design has no inspiration related to miko ?  kinda not true ...

Offline halocantkb

  • Formerly 'shota_irl'
  • Posts: 120
  • Location: leaf land
Re: [IC] Elite - F13 TKL
« Reply #59 on: Mon, 22 March 2021, 10:48:57 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash=grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Yeah, again, I still don't understand how this is a grab, when 'kpop inspired' boards are more and more rampant. Everyone just pulls out their wallets for that. I feel that this is some of the gatekeepers tryna keep the v-tube community separate from this hobby.

And this is coming from a K-pop mech simp myself(praying for RBB)
i don't think anyone has said that kpop boards aren't cashgrabby

if you're gonna do an inspired board at least actually try to take some design inspiration, instead of "lmao let's just cover generic tkl w/ references"

are you implyhing the design has no inspiration related to miko ?  kinda not true ...
please elaborate

Sent from my ELE-L04 using Tapatalk


Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #60 on: Mon, 22 March 2021, 11:06:35 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash=grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Yeah, again, I still don't understand how this is a grab, when 'kpop inspired' boards are more and more rampant. Everyone just pulls out their wallets for that. I feel that this is some of the gatekeepers tryna keep the v-tube community separate from this hobby.

And this is coming from a K-pop mech simp myself(praying for RBB)
i don't think anyone has said that kpop boards aren't cashgrabby

if you're gonna do an inspired board at least actually try to take some design inspiration, instead of "lmao let's just cover generic tkl w/ references"

are you implyhing the design has no inspiration related to miko ?  kinda not true ...
please elaborate

Sent from my ELE-L04 using Tapatalk

Her shrine maiden outfit (this one) has a lot of small details, but the most notable in my opinion is the side boob. Because of the revealing nature of this, the sides are inset with handholds and curvy because of her curvy build. There are two layers because of insets because of this, as you see the arm before the sideboob (hence wakipai energy). A brass through hole weight was chosen because of her golden bow around her waist. I decided to go with many engravings not only because I think they represent her quite nicely but also because her outfit is quite busy. If I were to design a board based of another vtuber, take Beatani Chisato, who has a much simpler outfit, there would not be as many engravings. There are 35 units because of mikopi, 5.3 degree angle because I thought 3.5 would be too low so I reversed the numbers. I don't mind as much when people say I'm cash grabbing but I do get offended when they say one of my boards is "uninspired"  :-[

Offline bakuretsu

  • Posts: 112
Re: [IC] Elite - F13 TKL
« Reply #61 on: Mon, 22 March 2021, 11:14:11 »
To avoid those comments, it would probably be a good idea to explain how the design decisions reflect the source of inspiration in the initial post of any new themed keyboard interest check.

Looking forward to adding a Miko L to my collection. My Calli L is getting lonely.

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #62 on: Mon, 22 March 2021, 11:15:21 »
To avoid those comments, it would probably be a good idea to explain how the design decisions reflect the source of inspiration in the initial post of any new themed keyboard interest check.

Looking forward to adding a Miko L to my collection. My Calli L is getting lonely.

don't think most people care and adds extra scrolling

Offline Livid

  • Posts: 45
Re: [IC] Elite - F13 TKL
« Reply #63 on: Mon, 22 March 2021, 11:38:11 »
Imagine calling a 35 unit GB a "cash grab" and saying to "fix" a design choice...

Offline of_sam

  • Posts: 272
  • Location: United States
Re: [IC] Elite - F13 TKL
« Reply #64 on: Mon, 22 March 2021, 12:05:17 »
Tits.
Typing on: HHKB Pro 2 - Stock :aware:
Collection: F1.69, Police, Jubi, RF 87U, En Dash, Rosenthal, Soulless, Frog, Calliope, GAF 910, Sabre, W1-AT

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #65 on: Tue, 23 March 2021, 13:47:40 »
Wasn't satisfied with interior engraving so, with the help of qarmaa (ty so much!) the engravings have been updated a bit. Will make actual renders after tweaking a bit  ;D


Offline gnaw

  • Posts: 37
  • Location: West Coast
Re: [IC] Elite - F13 TKL
« Reply #66 on: Tue, 23 March 2021, 14:13:05 »
Wasn't satisfied with interior engraving so, with the help of qarmaa (ty so much!) the engravings have been updated a bit. Will make actual renders after tweaking a bit  ;D

Show Image

this more nice and clean, very elite

Offline Baka Bot

  • Posts: 220
  • Location: idk somewhere in the Western Hemisphere
Re: [IC] Elite - F13 TKL
« Reply #67 on: Tue, 23 March 2021, 14:13:46 »
Wasn't satisfied with interior engraving so, with the help of qarmaa (ty so much!) the engravings have been updated a bit. Will make actual renders after tweaking a bit  ;D

Show Image

hmm yes new engravings yes yes.

Offline qats

  • Posts: 36
Re: [IC] Elite - F13 TKL
« Reply #68 on: Tue, 23 March 2021, 14:16:33 »
dear god :eek:

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #69 on: Tue, 23 March 2021, 17:26:09 »
added renders of updated engravings

Offline Alessio

  • Posts: 107
  • Location: Barcelona, Spain
    • YT Channel
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #70 on: Tue, 23 March 2021, 19:12:59 »
faq yoot

Offline Sicowa

  • Posts: 151
  • Location: Vancouver, Canada
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #71 on: Wed, 24 March 2021, 21:42:35 »
can't wait to take this L.
Love the updated inside engraving yoot.  :eek:
Collection: Khajit 60, Leopold FC980C, Pepper, Ex. Visa, Daedalus

pfp:https://twitter.com/kuroseP/status/1305179874429079553?s=19

Offline Jefff

  • Posts: 159
  • Location: California, USA
    • jlabs.co
Re: [IC] Elite - F13 TKL
« Reply #72 on: Wed, 24 March 2021, 23:06:46 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash-grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Sorry if I was unclear, I’ll elaborate. By cash-grabby, there are three main elements I’m referring to:

1. The updated engravings do look much better IMO, and they really show dedication to the project, but they aren’t (in my opinion) enough to distinguish this board from other TKL designs.

2. I haven’t heard anything from Miko regarding this board. Granted, I know literally nothing about vtubers and hololive, but it seems kinda weird to me to base a board off someone else’s online persona and profit from it. I also don’t know what the precedent is regarding boards/keycap sets inspired by other people, so I could be very wrong on this point.

3. IN MY OPINION, I see 35 boards as being too few to show commitment to the project but too many to make purely as a passion project. The production costs of 35 units will also be quite expensive compared to a higher number.

Final note: Please take everything I said here with a grain of salt. These opinions represent what I think of the IC, as it currently stands. What you think may be entirely different from what I think, and that is entirely ok. If you’d like some renders of the updated board with keycaps, feel free to hit me up on Discord at Jefff#5555. Best of luck with the board!

Offline of_sam

  • Posts: 272
  • Location: United States
Re: [IC] Elite - F13 TKL
« Reply #73 on: Wed, 24 March 2021, 23:08:08 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash-grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Sorry if I was unclear, I’ll elaborate. By cash-grabby, there are three main elements I’m referring to:

1. The updated engravings do look much better IMO, and they really show dedication to the project, but they aren’t (in my opinion) enough to distinguish this board from other TKL designs.

2. I haven’t heard anything from Miko regarding this board. Granted, I know literally nothing about vtubers and hololive, but it seems kinda weird to me to base a board off someone else’s online persona and profit from it. I also don’t know what the precedent is regarding boards/keycap sets inspired by other people, so I could be very wrong on this point.

3. IN MY OPINION, I see 35 boards as being too few to show commitment to the project but too many to make purely as a passion project. The production costs of 35 units will also be quite expensive compared to a higher number.

Final note: Please take everything I said here with a grain of salt. These opinions represent what I think of the IC, as it currently stands. What you think may be entirely different from what I think, and that is entirely ok. If you’d like some renders of the updated board with keycaps, feel free to hit me up on Discord at Jefff#5555. Best of luck with the board!
https://geekhack.org/index.php?topic=107202.0 35 boards....
« Last Edit: Wed, 24 March 2021, 23:10:12 by of_sam »
Typing on: HHKB Pro 2 - Stock :aware:
Collection: F1.69, Police, Jubi, RF 87U, En Dash, Rosenthal, Soulless, Frog, Calliope, GAF 910, Sabre, W1-AT

Offline FestiveIV

  • Posts: 9
  • Location: California
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #74 on: Wed, 24 March 2021, 23:24:53 »
will trade for zero two

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL
« Reply #75 on: Thu, 25 March 2021, 10:04:33 »
Honestly, not a huge fan of the engravings. Between this and the Calliope, I agree with some others that this feels a bit cash-grabby. If you insist on the engravings, I'd make them a bit cleaner. Additionally, information such as case materials, colours, layouts, plates, lighting, HS, etc should all be in the plates, and one should not need to extensively read the comments to gather this information.

not really understanding the cash grab comments when I haven't even given a price and have a limited amount of units. If I was cash grabbing, I would be doing an unlimited group buy at 700 bucks !

Sorry if I was unclear, I’ll elaborate. By cash-grabby, there are three main elements I’m referring to:

1. The updated engravings do look much better IMO, and they really show dedication to the project, but they aren’t (in my opinion) enough to distinguish this board from other TKL designs.

2. I haven’t heard anything from Miko regarding this board. Granted, I know literally nothing about vtubers and hololive, but it seems kinda weird to me to base a board off someone else’s online persona and profit from it. I also don’t know what the precedent is regarding boards/keycap sets inspired by other people, so I could be very wrong on this point.

3. IN MY OPINION, I see 35 boards as being too few to show commitment to the project but too many to make purely as a passion project. The production costs of 35 units will also be quite expensive compared to a higher number.

Final note: Please take everything I said here with a grain of salt. These opinions represent what I think of the IC, as it currently stands. What you think may be entirely different from what I think, and that is entirely ok. If you’d like some renders of the updated board with keycaps, feel free to hit me up on Discord at Jefff#5555. Best of luck with the board!

To address your points:

1. I never claimed for this board to be vastly different from other boards but even so I do believe the side profile is somewhat unique—not going to say its never been done before but I haven't seen it on other boards. I am planning on offering unique plate materials with run to further differentiate it. On top of that, I mainly made this board an f13 tkl because I wanted one and didn't see any that appealed to me on the market :).

2. It's kind of hard to explain if you don't understand it already but it feels really cool to own/create something based off a character or thing that you enjoy. Same reason why people make boards based off cars, kpop idols, etc.

3. 35 boards was chosen because Sakura Miko's fan name is Mikopi (35p). 35 units is also a number feel comfortable with. Sure, I could go with something like 70 units (like Calliope) but I feel like that would detract from the theme. What I will say about price is that I am hoping for sub 600 USD (makes me sad because I like boards to be a bit cheaper but the bottom is quite complex in terms of machining complexity).

Thanks for your explanation of what you meant by cash-grabby, though!

Offline LaserCrafter

  • Posts: 169
  • Location: lmao
  • reeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #76 on: Tue, 30 March 2021, 05:32:59 »
Maybe I should start watching anime...
Keyboard Collection: Unikorn, Orion v2.5, Orion v3, Realforce 87u, Viper v3, NMB RT8756CGR, Unicorn x Legend, Das II, TC-V3, Jetfire, Wang 325-3770, Lightpad v2

Keyset Collection: OG Doubleshots, CRP 2551 R4, Muted 2, Cyan R1, WoB, DCS Wyse, ISO OG POM, ePBT Blanks, BSP Blanks, BoW + Gigachild

Offline prettydouchebag

  • Posts: 45
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #77 on: Mon, 05 April 2021, 10:05:06 »
Can't wait for my first wakipai-energy board.

Offline Kinesiologist

  • Posts: 224
  • Location: Canada
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #78 on: Wed, 14 April 2021, 18:05:30 »
Will the case be compatible with hiney h88 pcb?

Offline tex_live_utility

  • Posts: 990
  • MX brown apologist
    • twitch.tv/salt_rock_lamp
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #79 on: Wed, 14 April 2021, 20:33:26 »
You guys are silly as hell. I wouldn't know v-tube from hentai, but the board looks really nice and I'd be happy to own one.
Discord: salt rock lamp#0679 | Reddit: /u/nerdponx | Deskthority: autoload -Uz | Keebtalk: salt_rock_lamp
Twitch: salt_rock_lamp | YouTube: https://www.youtube.com/channel/UCd7YXZjilUutJ6ShZWrvQtg | Instagram: @salt_rock_keyboards


Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #80 on: Fri, 16 April 2021, 11:18:19 »
I have ordered some Bakelite plates to test and they have arrived--board protos haven't, though

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL (updated engravings)
« Reply #81 on: Thu, 06 May 2021, 10:51:22 »
Proto pics have come in from the factory:







Offline dantambok

  • Posts: 963
  • Location: Goutland
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #82 on: Thu, 06 May 2021, 11:21:42 »
damn that looks really nice
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 /  Quantrik Hachi /  Quantrik  Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / 2x Unikorn 2.2 / Quantrik QXP /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus 65 / Kikuichimonji / Cake 60 / 2x AU Unikorn  Commission/ LZ XE / Paraluman 60 / AI03 Andromeda / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / 2x Singa Kohaku / Linworks EM8 / GAFxTGR 910 / TGRxKLC Dolice / TGR 910v2 ME / Noxary Valhalla / Hiney Ibis / LZ REs / PerryWorks MC65 / Hiney Poly TKL One / RS60 / Zekk RBB / QK80 / Keycult No 2 TKL / FLX Virgo r2 / Matrix Navi

Coming --   Lynx50 (wixx scammed us) / Ladybird60 / JJW Derivative / TGR Shi

100+ GMK sets


Offline aethernet

  • Posts: 39
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #83 on: Thu, 06 May 2021, 11:33:19 »
looking great! i'm really liking the engravings too :thumb:

Offline UswordM

  • Posts: 15
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #84 on: Thu, 06 May 2021, 23:53:51 »
This board looks so noice

Offline Sicowa

  • Posts: 151
  • Location: Vancouver, Canada
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #85 on: Fri, 07 May 2021, 00:46:58 »
poggu poggu
Collection: Khajit 60, Leopold FC980C, Pepper, Ex. Visa, Daedalus

pfp:https://twitter.com/kuroseP/status/1305179874429079553?s=19

Offline charlie_kabe

  • Posts: 5
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #86 on: Sun, 09 May 2021, 12:33:15 »
 :-*



Offline shima

  • Posts: 86
  • Location: California
  • keeb weeb
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #87 on: Sun, 09 May 2021, 14:25:50 »
oh man

i lost  :blank:
boards: anura




Offline treeleaf64

  • Posts: 1837
  • Location: United State
  • Traveler
    • treeleaf64
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #88 on: Sun, 09 May 2021, 15:30:40 »
yoot is my friend and  he has made me like  the vtuber
treeleaf64: https://discord.gg/rbUjtsRG6P

This is the cat and pat!!!!!!!!

Offline Belled

  • Posts: 31
  • Location: I live in the US
  • I like shoobs
Re: [IC] Elite - F13 TKL
« Reply #89 on: Sun, 16 May 2021, 20:48:05 »
Very Cultured

I'm reporting you to dell customer service

Offline tsukune1349

  • Posts: 44
  • Location: Ja
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #90 on: Sun, 16 May 2021, 21:41:53 »
New engraving is fire but I would honestly show the inner engraving on the back and vice versa  :-X

Offline superdoedoe

  • Posts: 535
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: [IC] Elite - F13 TKL (proto pics from factory)
« Reply #91 on: Mon, 17 May 2021, 01:43:03 »
yooo another cash grab at vtubers!

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #92 on: Wed, 19 May 2021, 20:07:51 »
proto arrived to me—after testing with pcb I plan on doing an in-stock buy.

stay tuned  ;)

Offline prettydouchebag

  • Posts: 45
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #93 on: Wed, 19 May 2021, 20:39:53 »
In-stock buy..... LEZ GOOOO

WAKIPAI ENGY STRONK

Offline Sicowa

  • Posts: 151
  • Location: Vancouver, Canada
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #94 on: Wed, 19 May 2021, 21:05:18 »
in stock lets go  :eek:


so excited!
Collection: Khajit 60, Leopold FC980C, Pepper, Ex. Visa, Daedalus

pfp:https://twitter.com/kuroseP/status/1305179874429079553?s=19

Offline qats

  • Posts: 36
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #95 on: Wed, 19 May 2021, 21:20:41 »
very poggers of you yoot

Offline adi

  • Posts: 120
  • Location: Bay Area, CA
  • adi.kbds; Consider ePBT Fruit Chew
    • Adi Nikumbh
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #96 on: Wed, 19 May 2021, 21:28:09 »
That bottom curve is ****in nice, but the engravings put me off

Offline LiTurk

  • Posts: 63
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #97 on: Wed, 19 May 2021, 21:29:22 »
any info on the pcb?

Offline UswordM

  • Posts: 15
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #98 on: Wed, 19 May 2021, 23:15:22 »
In stock, pog the hype is real!

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #99 on: Sat, 22 May 2021, 17:59:34 »
any info on the pcb?

It will use an h88c-style pcb with north facing spacebar stab

Offline yoot

  • Thread Starter
  • Posts: 299
  • Location: US
    • none
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #100 on: Fri, 25 June 2021, 22:30:18 »
Got some new renders made of the finalized design and color, a reddish-pink (huge thanks to marco!)











Offline Zeroblade

  • Posts: 53
  • Location: Philippines
    • Twitter
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #101 on: Sat, 26 June 2021, 03:28:35 »
Not super into Miko so I'll leave it to the real 35ps, but I love all the little details!
Doesn't push the elite references too much so it still looks nice and clean.

Entirely off topic, but is a Suichan board possibly in the pipeline 👀

Offline Sicowa

  • Posts: 151
  • Location: Vancouver, Canada
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #102 on: Sat, 09 April 2022, 19:31:37 »
wakipai very pog
Collection: Khajit 60, Leopold FC980C, Pepper, Ex. Visa, Daedalus

pfp:https://twitter.com/kuroseP/status/1305179874429079553?s=19

Offline granola bar enthusiast

  • Posts: 316
  • Location: USA
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #103 on: Sun, 10 April 2022, 12:58:07 »
love to see more gummy o-ring options on the market but im a bit saddened to see that people constantly compare it to the bakeneko, i get that the bakeneko is what mainly popularized the layout but you wouldn't compare a keycult to your portico because they both use a gasket mount right?

Offline unusuaL_

  • Posts: 100
  • Location: United Kingdom
  • Illustrious
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #104 on: Sun, 17 April 2022, 09:19:52 »
this thread was worth reading

patiently waiting for onibi, letting the miko fans go wild  :p
collection: yae60 proto, f1-8k (cocogoat shill), hhkb pro2

receiving: frieren tkl proto

Offline granola bar enthusiast

  • Posts: 316
  • Location: USA
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #105 on: Sun, 17 April 2022, 18:02:23 »
glad to see back weight's engravings improved
« Last Edit: Sun, 17 April 2022, 20:36:46 by granola bar enthusiast »

Offline Vigrith

  • Posts: 1843
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #106 on: Sun, 17 April 2022, 19:14:51 »
Interesting necro, skimmed through and I wonder if this is what my parents heard when I told them I couldn't pause my Everquest raid or baal run to go outside. I feel contaminated.

Offline treeleaf64

  • Posts: 1837
  • Location: United State
  • Traveler
    • treeleaf64
Re: [IC] Elite - F13 TKL (proto arrived to me !!!)
« Reply #107 on: Tue, 19 April 2022, 08:14:44 »
Hi yoot  Root  fruit Suit  Yay Yayaya
treeleaf64: https://discord.gg/rbUjtsRG6P

This is the cat and pat!!!!!!!!