GH60 Group Buy (Salvage Mode: Enabled - Update in OP)

[BunnyLake]

Drop off complete


Sent from my iPhone using Tapatalk

[zoidbergslo]

Package arrived Thanks for the extra switches (only one survived).

[mr.bean]

Sorry guys, what about EU orders?

[BunnyLake]

Sorry guys, what about EU orders?

what about them good sir, ive been updating pretty constantly?

[riotonthebay]

Sorry guys, what about EU orders?

Bunny made a long post about how he's handling the EU orders, it's linked at the top of the OP as well: https://geekhack.org/index.php?topic=41464.msg2323159#msg2323159

[Mikelittoris]

At long last, the wait is finaly over! Thanks a lot everyone involved in making this happend! 

Now I have just got to learn how to program this beauty 

[mauri]

At long last, the wait is finaly over! Thanks a lot everyone involved in making this happend! 

Show Image

Now I have just got to learn how to program this beauty  :p

Noice. I was planning a 7u spacebar ISO setup as well. Only thing now I need is a nice keyset, only got a spare with 1.5 mods and 6.25 spacebar.

[BunnyLake]

At long last, the wait is finaly over! Thanks a lot everyone involved in making this happend! 

Show Image

Now I have just got to learn how to program this beauty  :p

Any issues programming it hit me up


Sent from my iPhone using Tapatalk

[reality404]

Thanks everyone who made this possible and especially BunnyLake for shipping this to me.

[BunnyLake]

Few more about to be dropped off today

I'm a bit behind on my notifications to people so I'll be doing those tonight, lots have shipped to people I haven't let them know about over yesterday and this morning so I'll ping those folks tonight


Sent from my iPhone using Tapatalk

[stoic-lemon]

I'm hoping I'm one of those. It's so great to see these getting to people. Cheers to the salvage teams.

[guilleguillaume]

It's been so many years I can't even remember what I ordered. I can't even remember last time I logged in. I think it was 4x PCB because I have a PM from someone asking me if I would sell one to him. Any Idea of how could I find what I ordered?

I thought this GB was already dead.

[Dsan]

It's been so many years I can't even remember what I ordered. I can't even remember last time I logged in. I think it was 4x PCB because I have a PM from someone asking me if I would sell one to him. Any Idea of how could I find what I ordered?

I thought this GB was already dead.

This is really old and probably not updated but in my case accurate!

[mauri]

It's been so many years I can't even remember what I ordered. I can't even remember last time I logged in. I think it was 4x PCB because I have a PM from someone asking me if I would sell one to him. Any Idea of how could I find what I ordered?

I thought this GB was already dead.

Paypal should have the invoices from tjcaustin can't remember if they tell exactly what you ordered but yeah, helps.

[BunnyLake]

if anyone could link me to a gh60 hex file for a poker iso layout that would help me a ton, its making me wanna hit my head against a wall

[BunnyLake]

got the hex i needed

thanks folks

ended up doing 5 complete builds this weekend

netdevils board is next and then ill drop these 6 off, then i think just 2 more after that now going through all the support requests

im still a bit behind on support stuff but im about to start now and will hopefully get it finished before hitting bed

cheers folks

[SpAmRaY]

2 more orders should ship today

I've emailed and pm'd a bunch of people on my list with no response.

[zoidbergslo]

Here we go. Finished GH60 pure with MX blues and SP keycaps inisde plastic poker case. Thanks to all that helped with this group buy.

[danielucf]

Really happy that something is finally coming my way, but just curious if a decision was made about DIY orders?

[samwisekoi]

Really happy that something is finally coming my way, but just curious if a decision was made about DIY orders?

I have been waiting to see if the DIY kits are needed after all this time.  And also (well, primarily) procrastinating on dealing with that little box of evil.

However, I have now received two separate requests for info on the DIY kits.  I'll go open the box and see what it will really take to deal with.

And as always, anyone who wants to take this delightful little task off my hands is welcome to it!

 - Ron | samwisekoi
Auto-typed by my GH-122 keyboard.

[whiskytango]

Really happy that something is finally coming my way, but just curious if a decision was made about DIY orders?

I have been waiting to see if the DIY kits are needed after all this time.  And also (well, primarily) procrastinating on dealing with that little box of evil.

However, I have now received two separate requests for info on the DIY kits.  I'll go open the box and see what it will really take to deal with.

And as always, anyone who wants to take this delightful little task off my hands is welcome to it!

 - Ron | samwisekoi
Auto-typed by my GH-122 keyboard.

samwise, are you suggesting that there may be enough left over assembled PCBs because of people who do not respond (and I suppose then never receive their order?) that they could be substituted for DIY kits to those of us with DIY orders that have responded?

If so, proxies would then need to decide at what point they give up on people responding and start subbing out the assembled PCBs from the unclaimed leftovers

From the posts I see here from proxies stating how many have not responded to their contact attempts, I guess there my be lots of leftovers?

[samwisekoi]

There are some leftover assembled PCBs.  Not enough to replace the original list of DIY orders, but certainly enough to replace some of them.  Enough of them to cover actual current demand?  I don't know.

 - Ron | samwisekoi

[kravlin]

There are some leftover assembled PCBs.  Not enough to replace the original list of DIY orders, but certainly enough to replace some of them.  Enough of them to cover actual current demand?  I don't know.

 - Ron | samwisekoi

Can you comment on mashby's absence? Is stuff gonna get shipped from him?

[ricyuyc]

Is there any PCB will SMD soldered left for sell?

[SpAmRaY]

Is there any PCB will SMD soldered left for sell?

I know one of the members I am proxying for wants to sell his order.

[samwisekoi]

Can you comment on mashby's absence? Is stuff gonna get shipped from him?

I have no knowledge about mashby.

 - Ron | samwisekoi

[kravlin]

Can you comment on mashby's absence? Is stuff gonna get shipped from him?

I have no knowledge about mashby.

 - Ron | samwisekoi

Bummer.

Thank you though!

[BunnyLake]

Can you comment on mashby's absence? Is stuff gonna get shipped from him?

I have no knowledge about mashby.

 - Ron | samwisekoi

Bummer.

Thank you though!

i wouldnt worry about mashby, hes a super solid dude im sure his absence is time constraint related with work or something, he will show back up

and once myself and the other proxys have concluded shipping, we can look in to seeing what if any of his orders we can fullfill should he still be MIA

[BunnyLake]

just went through and did a ton of replies and shipping notifications on the support tickets

also a huge apology to the guy who wanted a board built and i accidentally shipped it to him as a kit

im rectifying that right now 

[SpAmRaY]

Can you comment on mashby's absence? Is stuff gonna get shipped from him?

I have no knowledge about mashby.

 - Ron | samwisekoi

Bummer.

Thank you though!

i wouldnt worry about mashby, hes a super solid dude im sure his absence is time constraint related with work or something, he will show back up

and once myself and the other proxys have concluded shipping, we can look in to seeing what if any of his orders we can fullfill should he still be MIA

To add to this, I'm only ~3hrs from mashby so one way or the other we will get this done eventually. I did send him an email to check on him and will reply if there is anything to add. 

[HoffmanMyster]

Can you comment on mashby's absence? Is stuff gonna get shipped from him?

I have no knowledge about mashby.

 - Ron | samwisekoi

Bummer.

Thank you though!

i wouldnt worry about mashby, hes a super solid dude im sure his absence is time constraint related with work or something, he will show back up

and once myself and the other proxys have concluded shipping, we can look in to seeing what if any of his orders we can fullfill should he still be MIA

To add to this, I'm only ~3hrs from mashby so one way or the other we will get this done eventually. I did send him an email to check on him and will reply if there is anything to add. 

I spoke to mashby a little while back, and he was absolutely swamped with work and personal issues.  If some assistance is needed, it sounds like ray can help out, but I'll also toss my name back in the bucket as able to help take on any additional work.  I am of course still working through my existing backlog but now that I'm settling in at the new place I should be able to work through what I have on my plate in a reasonable time frame. 

[kravlin]

Can you comment on mashby's absence? Is stuff gonna get shipped from him?

I have no knowledge about mashby.

 - Ron | samwisekoi

Bummer.

Thank you though!

i wouldnt worry about mashby, hes a super solid dude im sure his absence is time constraint related with work or something, he will show back up

and once myself and the other proxys have concluded shipping, we can look in to seeing what if any of his orders we can fullfill should he still be MIA

To add to this, I'm only ~3hrs from mashby so one way or the other we will get this done eventually. I did send him an email to check on him and will reply if there is anything to add. 

I spoke to mashby a little while back, and he was absolutely swamped with work and personal issues.  If some assistance is needed, it sounds like ray can help out, but I'll also toss my name back in the bucket as able to help take on any additional work.  I am of course still working through my existing backlog but now that I'm settling in at the new place I should be able to work through what I have on my plate in a reasonable time frame. 

Thank you! I totally get having personal issues, it's just hard to get this close to the ending and have the last person go quiet

[BunnyLake]

about to drop a bunch more gh60 stuff off, i believe i messaged everyone who is in this batch and said it would be going out by this friday, which it now is

ive also just been through all the other outstanding tickets and made a spread sheet of them and ill have all of those out and all complete builds out in the next drop off and then ive completed everyone who has either contacted me or replied

oh there is one person i said would be in this batch who isnt but ive just contacted that person through the support request and that will be dropped off monday

[BimboBB]

received my pcbs/plates. 


big thanks to all of you who are finishing this one off. you guys are awesome!   

[multipla]

sorry for the stupid questions, but how do I program the keyboard?
in the OP, is the programming button (S1) actually labelled as S0 on the PCB?
how do I create layouts? for example, with the tool from the prototyping thread, how can I add letters with umlauts and special characters in general?

[nebo]

Does anyone know what happened to mashby? It's been a year since my hopes got refreshed and he seems to be MIA.

[iamtootallforthis]

Does anyone know what happened to mashby? It's been a year since my hopes got refreshed and he seems to be MIA.

https://geekhack.org/index.php?topic=41464.msg2358023#msg2358023

[stoic-lemon]

I've responded to the support ticket on the site.

[Latin00032]

Where can I find the latest updates on this gb?

The op looks out of date.

[stoic-lemon]

That's an understatement. I'd recommend reading back 10 or so pages. Where is at depends on where you live I think.

[SpAmRaY]

Where can I find the latest updates on this gb?

The op looks out of date.

@Hoffmanmyster is your proxy and he is getting shipments out as he can. https://geekhack.org/index.php?topic=41464.msg2352724.msg#2352724

For @mashby people all I know is what has been posted that he is swamped with work and personal things. I've emailed him to check on him.

For my people I'm waiting on invoices to get paid and for responses to emails and PM's. I've only got a handful of orders left.

@Bunnylake is cranking out orders and giving updates for rest of the world.

On the DIY kits @samwisekoi posted recently about those here
https://geekhack.org/index.php?topic=41464.msg2356706.msg#2356706

[Latin00032]

Where can I find the latest updates on this gb?

The op looks out of date.

@Hoffmanmyster is your proxy and he is getting shipments out as he can. https://geekhack.org/index.php?topic=41464.msg2352724.msg#2352724

For @mashby people all I know is what has been posted that he is swamped with work and personal things. I've emailed him to check on him.

For my people I'm waiting on invoices to get paid and for responses to emails and PM's. I've only got a handful of orders left.

@Bunnylake is cranking out orders and giving updates for rest of the world.

On the DIY kits @samwisekoi posted recently about those here
https://geekhack.org/index.php?topic=41464.msg2356706.msg#2356706

I don't know where I stand.
 Is there a new invoice that I'm supposed to get?

[SpAmRaY]

Where can I find the latest updates on this gb?

The op looks out of date.

@Hoffmanmyster is your proxy and he is getting shipments out as he can. https://geekhack.org/index.php?topic=41464.msg2352724.msg#2352724

For @mashby people all I know is what has been posted that he is swamped with work and personal things. I've emailed him to check on him.

For my people I'm waiting on invoices to get paid and for responses to emails and PM's. I've only got a handful of orders left.

@Bunnylake is cranking out orders and giving updates for rest of the world.

On the DIY kits @samwisekoi posted recently about those here
https://geekhack.org/index.php?topic=41464.msg2356706.msg#2356706

I don't know where I stand.
 Is there a new invoice that I'm supposed to get?

Did you read the post I linked from @Hoffmanmyster ?

That's all anyone can tell you, he is your proxy.

I recommend you PM him and ask about your GH60 order since in the post I linked he mentioned anyone active should contact him so he can prioritize his orders.

[HoffmanMyster]

Where can I find the latest updates on this gb?

The op looks out of date.

@Hoffmanmyster is your proxy and he is getting shipments out as he can. https://geekhack.org/index.php?topic=41464.msg2352724.msg#2352724

I don't know where I stand.
 Is there a new invoice that I'm supposed to get?

I sent a shipping invoice to the email address that the confirmation email was sent to (also listed as your paypal email).  Did you receive it?  I just sent a reminder for the invoice - let me know if that doesn't go through. 

[Latin00032]

Where can I find the latest updates on this gb?

The op looks out of date.

@Hoffmanmyster is your proxy and he is getting shipments out as he can. https://geekhack.org/index.php?topic=41464.msg2352724.msg#2352724

I don't know where I stand.
 Is there a new invoice that I'm supposed to get?

I sent a shipping invoice to the email address that the confirmation email was sent to (also listed as your paypal email).  Did you receive it?  I just sent a reminder for the invoice - let me know if that doesn't go through. 

Yes. I received and paid it.
Was there anything else I needed to do?
Also, let me know that your received payment.

[Tarzan]

Who is my proxy?  US-based, ordered as Greystoke.

[SpAmRaY]

Who is my proxy?  US-based, ordered as Greystoke.

Mashby is your proxy, he is currently MIA and his last correspondence was that he was covered up with work and life.

I have recently tried reaching out to him by email and have not had a reply.

I'm sure he will come up for air at some point and give an update.


As an update to my people I've reached out to everyone and the only people left are people who have not replied and/or people who chose to wait until I was done to see what was left.

[HoffmanMyster]

I sent a shipping invoice to the email address that the confirmation email was sent to (also listed as your paypal email).  Did you receive it?  I just sent a reminder for the invoice - let me know if that doesn't go through. 

Yes. I received and paid it.
Was there anything else I needed to do?
Also, let me know that your received payment.

Got the payment!  It's been packaged up and ready to go, so I'll just print the shipping label, slap it on, and send it out.    Nothing else needed from you, and this should be wrapped up for you in a short while. 

[Glod]

I have faith that mashby will reappear; this group buy is cursed, i called it way back.

[Latin00032]

I sent a shipping invoice to the email address that the confirmation email was sent to (also listed as your paypal email).  Did you receive it?  I just sent a reminder for the invoice - let me know if that doesn't go through. 

Yes. I received and paid it.
Was there anything else I needed to do?
Also, let me know that your received payment.

Got the payment!  It's been packaged up and ready to go, so I'll just print the shipping label, slap it on, and send it out.    Nothing else needed from you, and this should be wrapped up for you in a short while. 

Yay! After all this time.
It's happening!