Author Topic: RO-59 SuperLube GB (Read 50133 times)

ReverbSlush · « **Reply #50 on:** Wed, 06 December 2017, 18:04:04 »

same here...

I got an invoice (132) but then it was cancelled. I'll wait for a new one!

OfTheWild · « **Reply #51 on:** Wed, 06 December 2017, 18:06:31 »

Got invoice, paid! Thanks. Looking forward to trying this stuff out.

Faux · « **Reply #52 on:** Wed, 06 December 2017, 18:21:04 »

Quote from: AuthenticDanger on Wed, 06 December 2017, 17:29:08

Quote from: Faux on Wed, 06 December 2017, 17:14:33
I've looked into the invoices, and some users were accidentally charged double for shipping. If you receive another invoice, please pay the new one. If you have already paid the higher one, send us an email at supposed@goosekbd.com and we will refund you the difference. We apologize for the issues.

Thanks for the quick reply!

Corrected invoices should have been sent out.

doom2 · « **Reply #53 on:** Wed, 06 December 2017, 18:25:11 »

Quote from: Faux on Wed, 06 December 2017, 18:21:04

Corrected invoices should have been sent out.

Received. Thanks!

AlexG · « **Reply #54 on:** Wed, 06 December 2017, 18:39:06 »

Paid! Will be using this on my next build. Totally forgot that I signed up for this.

dubious · « **Reply #55 on:** Wed, 06 December 2017, 18:43:27 »

Quote from: Faux on Wed, 06 December 2017, 17:14:33

I've looked into the invoices, and some users were accidentally charged double for shipping. If you receive another invoice, please pay the new one. If you have already paid the higher one, send us an email at supposed@goosekbd.com and we will refund you the difference. We apologize for the issues.

looks like auto correct fudged the email address. Should be support@goosekbd.com in case anyone didn't already figure that out

)

jenggo · « **Reply #56 on:** Wed, 06 December 2017, 18:57:34 »

paid! woohoooo....

Faux · « **Reply #57 on:** Wed, 06 December 2017, 23:44:18 »

Quote from: dubious on Wed, 06 December 2017, 18:43:27

Quote from: Faux on Wed, 06 December 2017, 17:14:33
I've looked into the invoices, and some users were accidentally charged double for shipping. If you receive another invoice, please pay the new one. If you have already paid the higher one, send us an email at supposed@goosekbd.com and we will refund you the difference. We apologize for the issues.

looks like auto correct fudged the email address. Should be support@goosekbd.com in case anyone didn't already figure that out )

Nice catch!

CommonCurt · « **Reply #58 on:** Thu, 07 December 2017, 02:18:09 »

Invoice paid

senter · « **Reply #59 on:** Thu, 07 December 2017, 07:40:31 »

Invoice paid

Looking forward to lube my switches!

fublamchu · « **Reply #60 on:** Thu, 07 December 2017, 10:22:31 »

Invoice paid!

ramnes · « **Reply #61 on:** Thu, 07 December 2017, 15:10:16 »

Damn, I missed this. Will mechboards.co.uk sell some upfront?

Faux · « **Reply #62 on:** Thu, 07 December 2017, 19:41:23 »

Quote from: ramnes on Thu, 07 December 2017, 15:10:16

Damn, I missed this. Will mechboards.co.uk sell some upfront?

Yes, they will be stocking a limited quantity

Giorgio · « **Reply #63 on:** Sun, 17 December 2017, 09:52:39 »

Interested in this too.

funderburker · « **Reply #64 on:** Sun, 17 December 2017, 12:33:34 »

Damn, missed this. Will be keeping eyes on mechboards.co.uk

jenggo · « **Reply #65 on:** Thu, 21 December 2017, 21:15:06 »

Got an update:

UPDATE 12/21/17: Lube as arrived later than expected. We will take photos and begin on packaging the lube, but shipping it out will be delayed until it is all packed.

We apologize for the delays.

AlexG · « **Reply #66 on:** Fri, 22 December 2017, 14:48:49 »

Thanks for the update.

Sylvestyeo · « **Reply #67 on:** Sat, 23 December 2017, 17:17:07 »

Thanks for the update! Please post some pictures of the packing process - looking forward to getting slippery!

CommonCurt · « **Reply #68 on:** Sat, 23 December 2017, 21:31:56 »

Quote from: Faux on Thu, 23 November 2017, 00:37:34

Quote from: CommonCurt on Thu, 23 November 2017, 00:35:35
Quote from: Faux on Wed, 22 November 2017, 14:49:43
Greets all!

We did not expect this to be approved so late, however, it could be a good thing. We've extended the deadline since we have been working on getting an EU proxy for EU buyers. I will update the original post to reflect the changes, however, the deadline is now extended since this post was approved late.

-Goose Keyboards.

Will it be coming from the factory pre-packaged in the two sizes offered?
Curious if there will be any manufacturer identification to show that said lube actually came from ro59inc?

The factory only sells in 5 gallon or 55 gallon sizes. We will be separating it and selling it, however, we can upload photos of the 5 gallon drum when we receive it.

Would love to see some pictures of what the 5 gallon drum label looks like, as well as any packaging pictures you can do

Faux · « **Reply #69 on:** Fri, 05 January 2018, 03:38:24 »

Delayed but small update: https://imgur.com/a/6xrQi

We'll work on shipping soon.

CommonCurt · « **Reply #70 on:** Fri, 05 January 2018, 04:48:53 »

Quote from: Faux on Fri, 05 January 2018, 03:38:24

Delayed but small update: https://imgur.com/a/6xrQi

We'll work on shipping soon.

Sweet! Thanks for the pics

unmuscular_michael · « **Reply #71 on:** Mon, 15 January 2018, 19:10:12 »

Any news?

jenggo · « **Reply #72 on:** Mon, 15 January 2018, 20:19:55 »

any news?

AlexG · « **Reply #73 on:** Mon, 15 January 2018, 20:58:36 »

Where my lube at?

Faux · « **Reply #74 on:** Tue, 16 January 2018, 22:04:31 »

We'll have an update in the next 2 days when the rest of our supplies come in.

CrimsonPelicon · « **Reply #75 on:** Tue, 16 January 2018, 23:13:51 »

Missed out on this group buy because I never thought I would spend loads of time lubing switches. Definitely regret that decision. Any chance of you having extras for purchase?

Faux · « **Reply #76 on:** Wed, 17 January 2018, 06:28:43 »

Quote from: CrimsonPelicon on Tue, 16 January 2018, 23:13:51

Missed out on this group buy because I never thought I would spend loads of time lubing switches. Definitely regret that decision. Any chance of you having extras for purchase?

Yes, we'll have extras for purchase. Send an email to support@goosekbd.com for more information.

Gumball · « **Reply #77 on:** Sat, 20 January 2018, 10:28:21 »

Any update?

Faux · « **Reply #78 on:** Fri, 26 January 2018, 18:22:23 »

Update posted.

pxlnght · « **Reply #79 on:** Fri, 26 January 2018, 20:28:24 »

Quote from: Faux on Fri, 26 January 2018, 18:22:23

Update posted.

Thanks for the update!!

CommonCurt · « **Reply #80 on:** Fri, 26 January 2018, 21:09:37 »

Quote from: Faux on Fri, 26 January 2018, 18:22:23

Update posted.

Can't wait

TalkingTree · « **Reply #81 on:** Sat, 27 January 2018, 02:46:15 »

So now that we are getting closer, I wanted to ask what kind of brush is recommended to lube switch stems.

AlexG · « **Reply #82 on:** Sat, 27 January 2018, 09:55:39 »

Quote from: TalkingTree on Sat, 27 January 2018, 02:46:15

So now that we are getting closer, I wanted to ask what kind of brush is recommended to lube switch stems.

Go to a craft store. Buy one of the smallest water color brushes they have. Buy a nicer one that doesn't fall apart. It's annoying picking the bristles off the switch.

CommonCurt · « **Reply #83 on:** Mon, 29 January 2018, 08:47:12 »

I have not had good luck with those little plastic vials.
Everyone I've ever gotten something in ended up leaking eventually.

vtachkov · « **Reply #84 on:** Fri, 02 February 2018, 10:45:01 »

Any updates on the shipping? I've got a bunch of switches just begging for that sweet lube.

t8c · « **Reply #85 on:** Mon, 05 February 2018, 10:45:36 »

Also looking for an update

H3NT4I · « **Reply #86 on:** Tue, 06 February 2018, 22:01:18 »

Almost forgot about this! Looking forward to trying RO-59.

Faux · « **Reply #87 on:** Tue, 06 February 2018, 23:16:28 »

Ahh sorry. I don't have an update. We're still working on shipping stuff out, but it's been slow because school. Hopefully we can get it shipped out soon. Also, important note. You HAVE to mix the lube with water. The ratio is really up to you, but if you don't mix it, you're not going to get that great results.

CommonCurt · « **Reply #88 on:** Tue, 06 February 2018, 23:28:17 »

Quote from: Faux on Tue, 06 February 2018, 23:16:28

Ahh sorry. I don't have an update. We're still working on shipping stuff out, but it's been slow because school. Hopefully we can get it shipped out soon. Also, important note. You HAVE to mix the lube with water. The ratio is really up to you, but if you don't mix it, you're not going to get that great results.

Are we going to get shipping notifications, or will stuff just start showing up?

Mix with water? Is there some kinda documentation anywhere to show what the best mixture is?

Faux · « **Reply #89 on:** Wed, 07 February 2018, 00:37:33 »

Quote from: CommonCurt on Tue, 06 February 2018, 23:28:17

Quote from: Faux on Tue, 06 February 2018, 23:16:28
Ahh sorry. I don't have an update. We're still working on shipping stuff out, but it's been slow because school. Hopefully we can get it shipped out soon. Also, important note. You HAVE to mix the lube with water. The ratio is really up to you, but if you don't mix it, you're not going to get that great results.

Are we going to get shipping notifications, or will stuff just start showing up?

Mix with water? Is there some kinda documentation anywhere to show what the best mixture is?

We'll look into organizing tracking numbers for everyone, but I don't want to speculate too much into the future.

For mixing, start of with equal parts water and lube and then play with ratios. That's the easiest way.

mastercheif116 · « **Reply #90 on:** Wed, 07 February 2018, 09:20:18 »

Looking forward to this getting shipped soon! gonna put together some zilents.

Question: can you lube springs with this a well?

vtachkov · « **Reply #91 on:** Wed, 07 February 2018, 23:28:06 »

I read about how RO-59 needs to be cured overnight. Does that mean we'll need to lube the switches and then let them sit out for the lube to dry before putting the switches back together?

dubious · « **Reply #92 on:** Thu, 08 February 2018, 11:37:09 »

Quote from: vtachkov on Wed, 07 February 2018, 23:28:06

I read about how RO-59 needs to be cured overnight. Does that mean we'll need to lube the switches and then let them sit out for the lube to dry before putting the switches back together?

you don't 'have to' but its highly recommended. Either that or take a hairdryer to them for 1/2 an hour.

I believe they use the RO-59tm88G formula, but I could be wrong.

CommonCurt · « **Reply #93 on:** Thu, 08 February 2018, 11:55:17 »

Quote from: Faux on Wed, 07 February 2018, 00:37:33

Quote from: CommonCurt on Tue, 06 February 2018, 23:28:17
Quote from: Faux on Tue, 06 February 2018, 23:16:28
Ahh sorry. I don't have an update. We're still working on shipping stuff out, but it's been slow because school. Hopefully we can get it shipped out soon. Also, important note. You HAVE to mix the lube with water. The ratio is really up to you, but if you don't mix it, you're not going to get that great results.

Are we going to get shipping notifications, or will stuff just start showing up?

Mix with water? Is there some kinda documentation anywhere to show what the best mixture is?

We'll look into organizing tracking numbers for everyone, but I don't want to speculate too much into the future.

For mixing, start of with equal parts water and lube and then play with ratios. That's the easiest way.

So is mixing the water something that the manufacturer recommends, or is it something that you discovered works best?

It must be pretty thick if your suggesting to dilute it with water?

unmuscular_michael · « **Reply #94 on:** Fri, 09 February 2018, 11:57:09 »

Just got notification of my R9 Blue Zilent switches, so I guess I am waiting on this now. This was supposed to happen before Christmas.

AuthenticDanger · « **Reply #95 on:** Fri, 09 February 2018, 13:33:28 »

The Lube:Water ratio for this is 1:1

Also, to apply RO-59tmKT:
1. Clean target surface
2. Brush on RO-59 so surface is covered, but not so much that puddles are created
3. Air dry until liquid evaporates. Paperwork says 30 minutes, but can take longer depending on the humidity
4. At this point, there are two options:
a. Heat at 65C for 3 minutes (for example, using a hairdryer)
b. Air dry for another 1-2x the time it took for the liquid to evaporate

NOTE: RO-59 should be stored out of direct sunlight, and should be shaken once a week to prevent sedimentation. Unapplied lube expires 1 year from manufacture.

AlexG · « **Reply #96 on:** Fri, 09 February 2018, 17:25:36 »

Kind of feeling like this was a mistake of a GB

Gumball · « **Reply #97 on:** Fri, 09 February 2018, 23:15:14 »

2 months later, still hasn't shipped.
What's going on?
Feel like I shouldn't have joined this GB, there's someone selling 5mL vials of RO-59 for $5+shipping on discord now.

AuthenticDanger · « **Reply #98 on:** Sat, 10 February 2018, 00:24:39 »

Quote from: Gumball on Fri, 09 February 2018, 23:15:14

2 months later, still hasn't shipped.
What's going on?
Feel like I shouldn't have joined this GB, there's someone selling 5mL vials of RO-59 for $5+shipping on discord now.

and the discord lube is premixed.

CommonCurt · « **Reply #99 on:** Sat, 10 February 2018, 00:27:39 »

So according to the manufacturer specs. If we got it in our hands today it would now have about 10 months shelf life left?

News:

Author Topic: RO-59 SuperLube GB (Read 50133 times)