« previous next »
Pages:  [1]     Go Down

Author Topic: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）  (Read 6067 times)

0 Members and 1 Guest are viewing this topic.

Offline KeyGeak

  • Thread Starter
  • Posts: 35
    • Keygeak
【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« on: Wed, 01 November 2023, 09:42:56 »
【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）

Hi. Dear friends. I am KeyGeak_Official. This PIXI 87 is a 80% layout keyboard featuring gasket and top mount design.

Inspiration
I gotta say something first，I started watching Gundam when I was eight years old. The first Gundam I watched at that time was Gundam Seed, which was played on a DVD. I watched the discs over and over again several times. When I went to college, I got my first laptop，then I started watching other Gundam series like 00 and Unicorn.

My dream is to drive my own Gundam and explore the universe, but that's still too far off for us. Maybe when this comes true, I can only drive my wheelchair.

So, I want to achieve this on my keyboard instead, to pay homage to the Gundam, the RX78

-The design comes from the RX-78, the original design in Gundam, and some elements are extracted for the keyboard case design.

1. The side lines are created through the combination of red and white, giving it an appearance similar to the RX-78's foot，Legs are just for show. The brass doesn't understand things like that!
303790-0

2. Crop, stretch, and rotate the chest armor section，Formed the decorative strip in the function key area
303792-1

3. Transformed the shape of the waist skirt armor into a front decoration.
303794-2

4. Transformed the RX-78-2's shield into an arrow key backlight cover
303796-3

5. Added the E.F.S.F symbol on the back
303798-4

DETAILS AND TECHNICAL INFORMATION

● A Tri-mode 1.6mm slotted RGB PCB
● Ammunition crate packaging box&Decorative crystal sticker
● decorative water sticker
● Separate C-port board
● Gasket-structured silicone sleeve
● Top structure mounting screws
● 3500mAh battery expandable to 4000mAh
● Sound dampening kit (bottom cotton, sandwich cotton, IXPE switch cushion
● PC unslotted dual-structure positioning board
● 6063 sprayed aluminum alloy upper shell
● 6063 sprayed aluminum alloy lower shell
● 6063 sprayed aluminum skirt decorative pieces
● 6063 electrophoretic yellow decorative parts
● 6063 anodized blue aluminum decorative strip
● 6063 anodized red aluminum light decorative panel
303800-5
303802-6

Size: 365*150*35mm  Case weight: 1746g
303804-7

More rendering images

303806-8303808-9
303810-10



SALE INFORMATION

● Units TBD
● Sale type TBD depending on interest
● Vendor information to be disclosed in the future.

Contact
My Discord server: https://discord.gg/VDH8Vku6bD

Most updates will be posted on my server as well as Geekhack.



We updated some actual photos
304716-11304718-12304720-13304722-14
Only 3 in stock

« Last Edit: Tue, 19 December 2023, 00:11:33 by KeyGeak »
Logged

Offline piteqiu

  • Posts: 20
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #1 on: Thu, 02 November 2023, 12:10:21 »
 :thumb:
Logged

Offline nook

  • Posts: 6
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #2 on: Thu, 02 November 2023, 20:35:58 »
Is there a quantity limit? When can we start? Is there any physical sample available?
Logged

Offline KeyGeak

  • Thread Starter
  • Posts: 35
    • Keygeak
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #3 on: Thu, 02 November 2023, 21:09:55 »
Logged

Offline KeyGeak

  • Thread Starter
  • Posts: 35
    • Keygeak
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #4 on: Thu, 02 November 2023, 21:19:31 »
Quote from: nook on Thu, 02 November 2023, 20:35:58
Is there a quantity limit? When can we start? Is there any physical sample available?
We are planning to begin pre-sale in mid-November, and it will take approximately one month to complete production. After that, we will proceed with shipping
Logged

Offline 2542899172sc@gmail.com

  • Posts: 1
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #5 on: Sun, 05 November 2023, 21:11:05 »
I really love the color combination of this keyboard, and I can't wait to have it. ;D ;D ;D
Logged

Offline Piifoxer

  • Posts: 4
  • piifoxer.com
    • Piifox
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #6 on: Tue, 07 November 2023, 00:34:29 »
 :thumb:Looks sooo cool!!
Logged

Offline WU

  • Posts: 32
  • Location: China
  • WUkds
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #7 on: Wed, 08 November 2023, 00:46:42 »
I like this color scheme very much
Logged

Offline LASERman Projects

  • Posts: 139
  • Location: Kent, UK
  • Soldering is my native language.
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #8 on: Wed, 08 November 2023, 06:41:24 »
Sorry but "arrow key backlight cover" looks bit like a coffin cover.
Logged

Offline badmark

  • Posts: 8
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #9 on: Wed, 08 November 2023, 08:52:44 »
Why is everything in your store 2-3 times the price they are listed for on Amazon? Why do you spam in places that spam is not welcome?

An MK870 is a $50 barebone keyboard; why are you selling it for $148?

Vendors like you place a large stain on this hobby and you should be ashamed.
Logged

Offline KeyGeak

  • Thread Starter
  • Posts: 35
    • Keygeak
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #10 on: Wed, 15 November 2023, 20:42:11 »
Quote from: LASERman Projects on Wed, 08 November 2023, 06:41:24
Sorry but "arrow key backlight cover" looks bit like a coffin cover.

Oh，nooo
Logged

Offline KeyGeak

  • Thread Starter
  • Posts: 35
    • Keygeak
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #11 on: Wed, 22 November 2023, 19:34:47 »
 :thumb:
Logged

Offline KeyGeak

  • Thread Starter
  • Posts: 35
    • Keygeak
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #12 on: Thu, 07 December 2023, 00:59:52 »
Quote from: KeyGeak on Wed, 01 November 2023, 09:42:56
【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）

Hi. Dear friends. I am KeyGeak_Official. This PIXI 87 is a 80% layout keyboard featuring gasket and top mount design.

Inspiration
I gotta say something first，I started watching Gundam when I was eight years old. The first Gundam I watched at that time was Gundam Seed, which was played on a DVD. I watched the discs over and over again several times. When I went to college, I got my first laptop，then I started watching other Gundam series like 00 and Unicorn.

My dream is to drive my own Gundam and explore the universe, but that's still too far off for us. Maybe when this comes true, I can only drive my wheelchair.

So, I want to achieve this on my keyboard instead, to pay homage to the Gundam, the RX78

-The design comes from the RX-78, the original design in Gundam, and some elements are extracted for the keyboard case design.

1. The side lines are created through the combination of red and white, giving it an appearance similar to the RX-78's foot，Legs are just for show. The brass doesn't understand things like that!
(Attachment Link)

2. Crop, stretch, and rotate the chest armor section，Formed the decorative strip in the function key area
(Attachment Link)

3. Transformed the shape of the waist skirt armor into a front decoration.
(Attachment Link)

4. Transformed the RX-78-2's shield into an arrow key backlight cover
(Attachment Link)

5. Added the E.F.S.F symbol on the back
(Attachment Link)

DETAILS AND TECHNICAL INFORMATION

● A Tri-mode 1.6mm slotted RGB PCB
● Ammunition crate packaging box&Decorative crystal sticker
● decorative water sticker
● Separate C-port board
● Gasket-structured silicone sleeve
● Top structure mounting screws
● 3500mAh battery expandable to 4000mAh
● Sound dampening kit (bottom cotton, sandwich cotton, IXPE switch cushion
● PC unslotted dual-structure positioning board
● 6063 sprayed aluminum alloy upper shell
● 6063 sprayed aluminum alloy lower shell
● 6063 sprayed aluminum skirt decorative pieces
● 6063 electrophoretic yellow decorative parts
● 6063 anodized blue aluminum decorative strip
● 6063 anodized red aluminum light decorative panel
(Attachment Link)
(Attachment Link)

Size: 365*150*35mm  Case weight: 1746g
(Attachment Link)

More rendering images

(Attachment Link) (Attachment Link)
(Attachment Link)



SALE INFORMATION

● Units TBD
● Sale type TBD depending on interest
● Vendor information to be disclosed in the future.

Contact
My Discord server: https://discord.gg/VDH8Vku6bD

Most updates will be posted on my server as well as Geekhack.



We updated some actual photos
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Updated some photos
304724-0
Logged

Offline KeyGeak

  • Thread Starter
  • Posts: 35
    • Keygeak
Re: 【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）
« Reply #13 on: Thu, 07 December 2023, 01:01:12 »
Quote from: KeyGeak on Thu, 07 December 2023, 00:59:52
Quote from: KeyGeak on Wed, 01 November 2023, 09:42:56
【IC】Keygeak-PIXI87 Customized Keyboard （Inspired by Gundam）

Hi. Dear friends. I am KeyGeak_Official. This PIXI 87 is a 80% layout keyboard featuring gasket and top mount design.

Inspiration
I gotta say something first，I started watching Gundam when I was eight years old. The first Gundam I watched at that time was Gundam Seed, which was played on a DVD. I watched the discs over and over again several times. When I went to college, I got my first laptop，then I started watching other Gundam series like 00 and Unicorn.

My dream is to drive my own Gundam and explore the universe, but that's still too far off for us. Maybe when this comes true, I can only drive my wheelchair.

So, I want to achieve this on my keyboard instead, to pay homage to the Gundam, the RX78

-The design comes from the RX-78, the original design in Gundam, and some elements are extracted for the keyboard case design.

1. The side lines are created through the combination of red and white, giving it an appearance similar to the RX-78's foot，Legs are just for show. The brass doesn't understand things like that!
(Attachment Link)

2. Crop, stretch, and rotate the chest armor section，Formed the decorative strip in the function key area
(Attachment Link)

3. Transformed the shape of the waist skirt armor into a front decoration.
(Attachment Link)

4. Transformed the RX-78-2's shield into an arrow key backlight cover
(Attachment Link)

5. Added the E.F.S.F symbol on the back
(Attachment Link)

DETAILS AND TECHNICAL INFORMATION

● A Tri-mode 1.6mm slotted RGB PCB
● Ammunition crate packaging box&Decorative crystal sticker
● decorative water sticker
● Separate C-port board
● Gasket-structured silicone sleeve
● Top structure mounting screws
● 3500mAh battery expandable to 4000mAh
● Sound dampening kit (bottom cotton, sandwich cotton, IXPE switch cushion
● PC unslotted dual-structure positioning board
● 6063 sprayed aluminum alloy upper shell
● 6063 sprayed aluminum alloy lower shell
● 6063 sprayed aluminum skirt decorative pieces
● 6063 electrophoretic yellow decorative parts
● 6063 anodized blue aluminum decorative strip
● 6063 anodized red aluminum light decorative panel
(Attachment Link)
(Attachment Link)

Size: 365*150*35mm  Case weight: 1746g
(Attachment Link)

More rendering images

(Attachment Link) (Attachment Link)
(Attachment Link)



SALE INFORMATION

● Units TBD
● Sale type TBD depending on interest
● Vendor information to be disclosed in the future.

Contact
My Discord server: https://discord.gg/VDH8Vku6bD

Most updates will be posted on my server as well as Geekhack.



We updated some actual photos
(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)
Updated some photos
(Attachment Link)
304726-0304728-1304730-2304732-3
Logged
Pages:  [1]     Go Up
« previous next »