Author Topic: LightSaver by Duck (Read 56334 times)

sherryton · « **on:** Wed, 23 October 2013, 04:20:57 »

http://www.originativeco.com/collections/custom-keyboards/products/lightsaber

Count: 20

0-14: $295
15-29: $285 <--- we are here.
30: $275

Of course I will help with the purchase at the end. I will refund you guys whatever is needed. The refund takes less than a week to return. Thanks everyone for the support

bueller · « **Reply #1 on:** Wed, 23 October 2013, 04:28:00 »

Quote from: sherryton on Wed, 23 October 2013, 04:20:57

http://imgur.com/a/JH9ox

Anyone interested in the Lightsaver or Duck V2 with the raiser?

The Lightsaver weighs approximately 4.7 lbs. The box and accessories it comes with is an additional 4.6 lbs.

The cost is around $275.

This includes the case, plate, pcb, and accessories.

What are you doing to us Sherry! Absolutely beautiful. Depending on time frames I'll probably be in.

bazemk1979 · « **Reply #2 on:** Wed, 23 October 2013, 04:35:11 »

Quote from: sherryton on Wed, 23 October 2013, 04:20:57

http://imgur.com/a/JH9ox

Anyone interested in the Lightsaver or Duck V2 with the raiser?

The Lightsaver weighs approximately 4.7 lbs. The box and accessories it comes with is an additional 4.6 lbs.

The cost is around $275.

This includes the case, plate, pcb, and accessories.

great looking board, if the keyboard weights 4.7lbs how can the accessories weigh additional 4.6lbs? what sort of accessories are those? BTW did the guy came out with programming software for it?

Halverson · « **Reply #3 on:** Wed, 23 October 2013, 04:35:46 »

Hmm that light saver is really nice

LechnerDE · « **Reply #4 on:** Wed, 23 October 2013, 04:36:32 »

Absolutely beautiful!

Does "accessories" include LEDs and everything so I just need the switches to get a working keyboard?

esoomenona · « **Reply #5 on:** Wed, 23 October 2013, 06:12:01 »

What sort of accessories? And does it allow any deviation in the layout, mainly 1800 shift and extra key?

AKIMbO · « **Reply #6 on:** Wed, 23 October 2013, 06:43:58 »

The light saver is beautiful

Halverson · « **Reply #7 on:** Wed, 23 October 2013, 06:45:46 »

I forgot to ask. Any chance this will have an alps compatible pcb like the duck V2? Would be very interested in that.

esoomenona · « **Reply #8 on:** Wed, 23 October 2013, 07:44:42 »

I want it anyway, but hope for 1800 shift. I will take one.

BunnyLake · « **Reply #9 on:** Wed, 23 October 2013, 07:49:24 »

id take one or both

TheFlyingRaccoon · « **Reply #10 on:** Wed, 23 October 2013, 08:13:55 »

This looks amazing. Interested!

Forever · « **Reply #11 on:** Wed, 23 October 2013, 08:32:39 »

It's really nice. I like the layout

boost · « **Reply #12 on:** Wed, 23 October 2013, 08:35:21 »

Slick looking keyboard.

phetto · « **Reply #13 on:** Wed, 23 October 2013, 09:18:05 »

Very interested

jdcarpe · « **Reply #14 on:** Wed, 23 October 2013, 09:26:51 »

The only problem I have with it is the layout. Because Duck0113 wants to keep things simple, and use a tray style case design, there is a limitation to what can be done with the layout. There is no spacing of separation between the alphanumeric section and the numpad section, or the function row. While it doesn't seem like this would be a problem, your fingers will fumble, because they naturally look for this spacing they are used to, for reference. While I think the case is beautiful, I can't get past the layout limitation.

esoomenona · « **Reply #15 on:** Wed, 23 October 2013, 09:30:22 »

I don't see it as a limitation, but a feature. It allows a smaller keyboard while still maintaining most keys. Perhaps you're correct in that it will pose a problem, but I'm sure that can be overcome with experience and use.

Moosecraft · « **Reply #16 on:** Wed, 23 October 2013, 09:41:39 »

Lightsaver!!

Photekq · « **Reply #17 on:** Wed, 23 October 2013, 09:43:50 »

Quote from: jdcarpe on Wed, 23 October 2013, 09:26:51

The only problem I have with it is the layout. Because Duck0113 wants to keep things simple, and use a tray style case design, there is a limitation to what can be done with the layout. There is no spacing of separation between the alphanumeric section and the numpad section, or the function row. While it doesn't seem like this would be a problem, your fingers will fumble, because they naturally look for this spacing they are used to, for reference. While I think the case is beautiful, I can't get past the layout limitation.

Is it tray-style? Look at the 2nd-to-last picture. Also, in the last picture you can see a PCB & plate installed in the top half. Seems like a classic 2piece+plate to me, with the plate inside the top half (like most LZ cases).

I do agree with the layout though. Lovely board and great price, just not a fan of the layout.

Signature · « **Reply #18 on:** Wed, 23 October 2013, 09:49:49 »

Want one!!

TheFlyingRaccoon · « **Reply #19 on:** Wed, 23 October 2013, 10:48:56 »

Personally, I think the layout is the best part. Along with the excessive LEDs, this is a must buy for me. Also $275 seems like a very reasonable price for what's included.

LONGZILLA · « **Reply #20 on:** Wed, 23 October 2013, 10:53:05 »

Quote from: TheFlyingRaccoon on Wed, 23 October 2013, 10:48:56

Personally, I think the layout is the best part. Along with the excessive LEDs, this is a must buy for me. Also $275 seems like a very reasonable price for what's included.

Agreed, pretty reasonable price, definitely interested.

MKULTRA · « **Reply #21 on:** Wed, 23 October 2013, 12:03:32 »

The layout is meh. Interested nonetheless.

ItsBc · « **Reply #22 on:** Wed, 23 October 2013, 12:17:53 »

you already know I am sherry ^_^

danielucf · « **Reply #23 on:** Wed, 23 October 2013, 12:18:08 »

Consider me in, I've been wanting this layout for ages. If it can support 1.75 shift and 00 and 0 keys on the numpad it would be even better.

moogle · « **Reply #24 on:** Wed, 23 October 2013, 14:07:25 »

need a lightsaver to keep my kingsaver company

Dubsgalore · « **Reply #25 on:** Wed, 23 October 2013, 14:09:17 »

LightSaver, yes please

xauser · « **Reply #26 on:** Wed, 23 October 2013, 14:29:43 »

What a beauty, I'm in!

mattics · « **Reply #27 on:** Wed, 23 October 2013, 14:36:39 »

Looks awesome!

Did I miss something or is your site supposed to be down? When I visit I get a shopify down for maintenance page, I checked yesterday (or possibly the day before that) and got the same thing. I did a quick search/skim around here and couldn't see anything mentioning it.

Sifo · « **Reply #28 on:** Wed, 23 October 2013, 14:37:13 »

been wanting this for a while, contacted a bunch of ppl to get one. However... need tosave money.

Dubsgalore · « **Reply #29 on:** Wed, 23 October 2013, 14:40:36 »

I think i would actually get one in silver at one point

I know from the his site (which is out-of-stock at the moment), that kits offer 1800 and regular shifts, and winkeyless or winkey

I'd go for winkeyless and regular shift i think..not sure

mashby · « **Reply #30 on:** Wed, 23 October 2013, 15:16:17 »

I'm in for a Lightsaver.

cgbuen · « **Reply #31 on:** Wed, 23 October 2013, 15:25:01 »

I'm interested also.

sherryton · « **Reply #32 on:** Wed, 23 October 2013, 15:33:56 »

Thanks for the feedback. I'll go tell duck how appreciative you guys are!

The accessories does not include LED. Most of the items that are included is to piece together everything.

There are 2 LEDs to each side on the bottom, and those are included.

boost · « **Reply #33 on:** Wed, 23 October 2013, 15:39:03 »

Quote from: sherryton on Wed, 23 October 2013, 15:33:56

Thanks for the feedback. I'll go tell duck how appreciative you guys are!

The accessories does not include LED. Most of the items that are included is to piece together everything.

There are 2 LEDs to each side on the bottom, and those are included.

*Let the camping begin!!!!!!!

tjcaustin · « **Reply #34 on:** Wed, 23 October 2013, 16:01:20 »

That's an attractive keyboard.

TheFlyingRaccoon · « **Reply #35 on:** Wed, 23 October 2013, 16:11:00 »

Quote from: sherryton on Wed, 23 October 2013, 15:33:56

Thanks for the feedback. I'll go tell duck how appreciative you guys are!

The accessories does not include LED. Most of the items that are included is to piece together everything.

There are 2 LEDs to each side on the bottom, and those are included.

Will it be available on your site? Possible a groupbuy? ETA? I want details man!

Steven · « **Reply #36 on:** Wed, 23 October 2013, 18:42:05 »

http://duck0113.tistory.com/category/LIGHT%20SAVER
This is alps and cherry combo keyboard. Selective "zone led" and side beam. Very nice, im gonna grab the duck v3 (same lightsaver design 60%) if they are available.

Elrick · « **Reply #37 on:** Thu, 24 October 2013, 02:15:01 »

Quote from: sherryton on Wed, 23 October 2013, 04:20:57

http://imgur.com/a/JH9ox

Anyone interested in the Lightsaver or Duck V2 with the raiser?

The Lightsaver weighs approximately 4.7 lbs. The box and accessories it comes with is an additional 4.6 lbs.

The cost is around $275.

This includes the case, plate, pcb, and accessories.

Dear Sir,

Would be interested in joining this.

Please let me know when you will run this Group Buy (if you're going to run one) because it's cheap compared to REDLINE's stuff.

MKULTRA · « **Reply #38 on:** Thu, 24 October 2013, 02:24:00 »

Quote from: Elrick on Thu, 24 October 2013, 02:15:01

Quote from: sherryton on Wed, 23 October 2013, 04:20:57
http://imgur.com/a/JH9ox

Anyone interested in the Lightsaver or Duck V2 with the raiser?

The Lightsaver weighs approximately 4.7 lbs. The box and accessories it comes with is an additional 4.6 lbs.

The cost is around $275.

This includes the case, plate, pcb, and accessories.

Dear Sir,

Would be interested in joining this.

Please let me know when you will run this Group Buy (if you're going to run one) because it's cheap compared to REDLINE's stuff.

RT

That's why I'm jumping in on spirt's MX Mini GB instead of LZ MX GH

Elrick · « **Reply #39 on:** Thu, 24 October 2013, 04:10:29 »

Quote from: MKULTRA on Thu, 24 October 2013, 02:24:00

That's why I'm jumping in on spirt's MX Mini GB instead of LZ MX GH

Smartie, I thought that everyone was in love with LZ gear

. It just leaves more to appreciate the other keyboards that are available to us now.

Definitely will buy this Duck when Sherryton gives the go ahead and also want a 75% MX-mini W: PCB + Plate + Case by sprit. Good times are ahead of us here.

esoomenona · « **Reply #40 on:** Thu, 24 October 2013, 08:26:17 »

I'm fairly certain the price increase on increasingly larger pieces of metal to begin work on is exponential.

ItsBc · « **Reply #41 on:** Thu, 24 October 2013, 12:27:05 »

give me a heads up on skype sherry

TLSC.wipeOut · « **Reply #42 on:** Thu, 24 October 2013, 18:50:35 »

that's a very interesting layout... I might consider it ! also based on the pictures are there two separate pcbs within the case? (TKL + Tenkey)

bazemk1979 · « **Reply #43 on:** Thu, 24 October 2013, 19:12:50 »

Quote from: TLSC.wipeOut on Thu, 24 October 2013, 18:50:35

that's a very interesting layout... I might consider it ! also based on the pictures are there two separate pcbs within the case? (TKL + Tenkey)

good question

digi · « **Reply #44 on:** Thu, 24 October 2013, 19:14:12 »

Love the layout, do it Sherry!

Elrick · « **Reply #45 on:** Thu, 24 October 2013, 19:34:31 »

Quote from: esoomenona on Thu, 24 October 2013, 08:26:17

I'm fairly certain the price increase on increasingly larger pieces of metal to begin work on is exponential.

True, the more metal the bigger the cash outlay.

What I also like is the different keyboard layouts that have caught my interest. No longer interested in the plain old TKL or 104 key layout. At least Sherryton's new Duck keyboard is different but extremely usable.

Besides, we're dealing with Sherryton hence all is good

.

codyeatworld · « **Reply #46 on:** Thu, 24 October 2013, 19:48:47 »

the more I look at this keyboard, the more I want it...

Steven · « **Reply #47 on:** Thu, 24 October 2013, 20:27:04 »

Quote from: TLSC.wipeOut on Thu, 24 October 2013, 18:50:35

that's a very interesting layout... I might consider it ! also based on the pictures are there two separate pcbs within the case? (TKL + Tenkey)

Quote from: bazemk1979 on Thu, 24 October 2013, 19:12:50

Quote from: TLSC.wipeOut on Thu, 24 October 2013, 18:50:35
that's a very interesting layout... I might consider it ! also based on the pictures are there two separate pcbs within the case? (TKL + Tenkey)

good question

This is from the Saver family series.

The picture posted by Sherry with the TKL + Tenkey PCB, that is Saver(TKL keyboard) + T-Saver (Tenkeys Numpad)

What Sherry is offering now is the Light Saver, what I'm waiting for is the Mini Saver (60%) and Light Saver Limited(If it is TKL)

L4yercake · « **Reply #48 on:** Thu, 24 October 2013, 20:44:09 »

I'm in.

MKULTRA · « **Reply #49 on:** Fri, 25 October 2013, 01:37:14 »

I want one without the numpad haha.

News:

Author Topic: LightSaver by Duck (Read 56334 times)