Author Topic: [IC] hbcp - hineybush compact (Read 146730 times)

dimo · « **Reply #50 on:** Wed, 13 June 2018, 21:36:44 »

estimated price?

hineybush · « **Reply #51 on:** Wed, 13 June 2018, 21:40:33 »

Quote from: dimo on Wed, 13 June 2018, 21:36:44

estimated price?

not sure yet, i haven't gotten quotes yet but i'm hoping to after i go on vacation next week. my "goal" is sub $450 for the kit.

dimo · « **Reply #52 on:** Wed, 13 June 2018, 21:43:03 »

Quote from: hineybush on Wed, 13 June 2018, 21:40:33

Quote from: dimo on Wed, 13 June 2018, 21:36:44
estimated price?

not sure yet, i haven't gotten quotes yet but i'm hoping to after i go on vacation next week. my "goal" is sub $450 for the kit.

Damn, alright. I'll have to start saving then :] pricey pricey

ARSLOCK · « **Reply #53 on:** Thu, 14 June 2018, 15:04:16 »

you know I want it

ramblinrose · « **Reply #54 on:** Thu, 14 June 2018, 21:26:02 »

Looks nice - I like the simplicity and lower degree angle. Any chance of a dark forest green color

hineybush · « **Reply #55 on:** Fri, 15 June 2018, 00:43:28 »

I'm totally unsure on final colors atm, it largely depends on who manufactures/finishes the boards. I'd like to do black, grey, silver, red, blue, green, gold, purple.. we'll see lol.

dimo · « **Reply #56 on:** Fri, 15 June 2018, 00:45:59 »

Quote from: hineybush on Fri, 15 June 2018, 00:43:28

I'm totally unsure on final colors atm, it largely depends on who manufactures/finishes the boards. I'd like to do black, grey, silver, red, blue, green, gold, purple.. we'll see lol.

****ing in for a gold

kwerdenker · « **Reply #57 on:** Fri, 15 June 2018, 01:32:54 »

Since I'm looking for a good 1800CP board I'd be totally in for this... If we can make the ISO support happen.

Since the amount of people wanting this will probably be low, maybe you could just release the plate files so people who want it could get them cut themselves. Provided the PCB supports ISO layout obviously.

Jhors2 · « **Reply #58 on:** Fri, 15 June 2018, 01:37:05 »

I can't find anywhere you explicitly said this but is this top mount or sandwich mount? I'm assuming top mount.

Some of the more exotic plate/weight options would be interesting. Any chance for poly plate as well? I do like the idea of partial plate for sure.

hineybush · « **Reply #59 on:** Fri, 15 June 2018, 01:57:22 »

Quote from: kwerdenker on Fri, 15 June 2018, 01:32:54

Since I'm looking for a good 1800CP board I'd be totally in for this... If we can make the ISO support happen.

Since the amount of people wanting this will probably be low, maybe you could just release the plate files so people who want it could get them cut themselves. Provided the PCB supports ISO layout obviously.

Iso can happen, I just haven't done the plate yet

Quote from: Jhors2 on Fri, 15 June 2018, 01:37:05

I can't find anywhere you explicitly said this but is this top mount or sandwich mount? I'm assuming top mount.

Some of the more exotic plate/weight options would be interesting. Any chance for poly plate as well? I do like the idea of partial plate for sure.

Top mount. The plate will screw into the top half of the case, with or without the addition of o rings as dampers/cushions. Similar to gasket mount but modular

Poly maybe. I haven't messed with poly plates yet and I don't care much for thicker plates myself, but I'm interested to see how the couple boards that're shipping soon with them will be received.

ian13 · « **Reply #60 on:** Fri, 15 June 2018, 04:00:18 »

Nice.

Kidding aside, I also personally like the 1800 layout. So, this is certainly a very nice project!

bthezebra · « **Reply #61 on:** Fri, 15 June 2018, 11:50:52 »

Down for the gold as well. Looks unique but still classy in design.

hineybush · « **Reply #62 on:** Fri, 15 June 2018, 21:50:23 »

Proto files submitted for quotation.

Full plate (supports ISO):

Half/partial plate (does not support ISO because of the cutout area conflicting):

Dovan1405 · « **Reply #63 on:** Sat, 16 June 2018, 13:39:27 »

do something bright and funnnn. all recent keyboards have been the same colourssss, grey silver navy blue gold red. try other shades like pastel or something

dimo · « **Reply #64 on:** Sat, 16 June 2018, 13:42:14 »

Quote from: Dovan1405 on Sat, 16 June 2018, 13:39:27

do something bright and funnnn. all recent keyboards have been the same colourssss, grey silver navy blue gold red. try other shades like pastel or something

when tf was the last keyboard that was GOLD?

I think this board doesn't match "pastel" colors. The board looks more professional than that.

Although boards like the orange75 can get away with crazy colors.

ihalatch · « **Reply #65 on:** Sat, 16 June 2018, 20:45:01 »

Beautiful design!

owacle · « **Reply #66 on:** Sat, 16 June 2018, 21:54:40 »

So in for this!!

fine_italian_leather · « **Reply #67 on:** Sat, 16 June 2018, 22:06:24 »

Quote from: dimo on Sat, 16 June 2018, 13:42:14

when tf was the last keyboard that was GOLD?

first gold colored ones that come to mind are the mech27 v1 and fox orange tkl

Puddsy · « **Reply #68 on:** Sat, 16 June 2018, 23:02:05 »

Quote from: fine_italian_leather on Sat, 16 June 2018, 22:06:24

Quote from: dimo on Sat, 16 June 2018, 13:42:14

when tf was the last keyboard that was GOLD?

first gold colored ones that come to mind are the mech27 v1 and fox orange tkl

LZ offered it on some old designs

LZCE

Rykno · « **Reply #69 on:** Sun, 17 June 2018, 01:21:40 »

Loving it so far - please make the cutout for the USB port wide enough to accommodate wide jackets/connectors.

hineybush · « **Reply #70 on:** Sun, 17 June 2018, 09:00:14 »

Quote from: Rykno on Sun, 17 June 2018, 01:21:40

Loving it so far - please make the cutout for the USB port wide enough to accommodate wide jackets/connectors.

How wide?

dimo · « **Reply #71 on:** Sun, 17 June 2018, 11:40:11 »

Quote from: fine_italian_leather on Sat, 16 June 2018, 22:06:24

Quote from: dimo on Sat, 16 June 2018, 13:42:14

when tf was the last keyboard that was GOLD?

first gold colored ones that come to mind are the mech27 v1 and fox orange tkl

I was mainly going towards the fact that the original commenter said “all” recent boards have been gold, which I disagreed with

fine_italian_leather · « **Reply #72 on:** Sun, 17 June 2018, 14:52:24 »

Quote from: dimo on Sun, 17 June 2018, 11:40:11

Quote from: fine_italian_leather on Sat, 16 June 2018, 22:06:24
Quote from: dimo on Sat, 16 June 2018, 13:42:14

when tf was the last keyboard that was GOLD?

first gold colored ones that come to mind are the mech27 v1 and fox orange tkl

I was mainly going towards the fact that the original commenter said “all” recent boards have been gold, which I disagreed with

obvious hyperbole, pls

on topic: design looks great and it's nice to see some customs with less aggressive angles. gl hineyboy

portbaron · « **Reply #73 on:** Sun, 17 June 2018, 15:01:41 »

Quote from: hineybush on Sun, 17 June 2018, 09:00:14

Quote from: Rykno on Sun, 17 June 2018, 01:21:40
Loving it so far - please make the cutout for the USB port wide enough to accommodate wide jackets/connectors.

How wide?

The height of the opening is often an issue for mini, but USB-C is wider. I'd say 10mm H x 13mm W is safe for USB-C

spyruf · « **Reply #74 on:** Sun, 17 June 2018, 15:41:13 »

Looks nice, definitely interested.

geniekid · « **Reply #75 on:** Sun, 17 June 2018, 16:38:54 »

Love the layout and the 4 degree angle.

Cavemann6 · « **Reply #76 on:** Sun, 17 June 2018, 21:37:11 »

Please do gold or rose gold

dimo · « **Reply #77 on:** Sun, 17 June 2018, 21:53:41 »

rose gold has been done to death.

Gold though ..

forevermadrigal · « **Reply #78 on:** Tue, 19 June 2018, 06:50:27 »

Gold would be such a nice color for this board

ray160 · « **Reply #79 on:** Thu, 21 June 2018, 16:57:52 »

I see a lot of plates with lots of holes in them, how does this help with sound?

hineybush · « **Reply #80 on:** Fri, 22 June 2018, 14:36:38 »

not sure but I've seen it done on highly-regarded boards so I'm excited to see if it really works lol

planning to get some more proto quotes within the next week, and figure out how I'm gonna pay for them

stevesie · « **Reply #81 on:** Sun, 24 June 2018, 02:19:00 »

This looks good. Waiting to see approximate prices to see if it's feasable for me. Would love to see a nice forest green or navy blue.

ojrask · « **Reply #82 on:** Sun, 24 June 2018, 15:33:07 »

Interested.

p_blaze · « **Reply #83 on:** Sun, 24 June 2018, 18:31:28 »

Zeroblade · « **Reply #84 on:** Mon, 25 June 2018, 01:52:29 »

bball2 · « **Reply #85 on:** Mon, 25 June 2018, 01:57:52 »

forevermadrigal · « **Reply #86 on:** Mon, 25 June 2018, 03:49:50 »

Barely saw the 4 degree angle, sounds interesting. Anyone have experience with this?

sythie · « **Reply #87 on:** Mon, 25 June 2018, 09:16:26 »

Looks nice!
Would definitely be interested if there will be an option for ISO layout.

hineybush · « **Reply #88 on:** Mon, 25 June 2018, 09:35:59 »

Quote from: sythie on Mon, 25 June 2018, 09:16:26

Looks nice!
Would definitely be interested if there will be an option for ISO layout.

The full plate will have ISO, half plate won't because it'd interfere with the enter key/stab mounting

CandyKeys · « **Reply #89 on:** Mon, 25 June 2018, 11:51:24 »

What is the pricing looking like on this? This looks great.

hineybush · « **Reply #90 on:** Mon, 25 June 2018, 13:05:52 »

Quote from: hineybush on Wed, 13 June 2018, 21:40:33

Quote from: dimo on Wed, 13 June 2018, 21:36:44
estimated price?

not sure yet, i haven't gotten quotes yet but i'm hoping to after i go on vacation next week. my "goal" is sub $450 for the kit.

hineybush · « **Reply #91 on:** Wed, 04 July 2018, 03:00:24 »

duynguyenle · « **Reply #92 on:** Thu, 05 July 2018, 16:56:27 »

BobCarltheThird · « **Reply #93 on:** Sat, 07 July 2018, 18:40:23 »

meniscus- · « **Reply #94 on:** Sat, 07 July 2018, 19:28:39 »

Any plans to make a 60% version in the future?

portbaron · « **Reply #95 on:** Sat, 07 July 2018, 19:37:50 »

What about cerakote color options, like on the M0110 running now? There are lots of places in the US that cerakote (mostly just guns though), and the range of colors is amazing.

hineybush · « **Reply #96 on:** Sat, 07 July 2018, 20:06:28 »

Quote from: meniscus- on Sat, 07 July 2018, 19:28:39

Any plans to make a 60% version in the future?

Maybe. I'm not particularly fond of 60%'s but I'll look into it

Quote from: portbaron on Sat, 07 July 2018, 19:37:50

What about cerakote color options, like on the M0110 running now? There are lots of places in the US that cerakote (mostly just guns though), and the range of colors is amazing.

Maybe, seems like it'd be a good option to offer.

cumwagondeluxe · « **Reply #97 on:** Mon, 09 July 2018, 13:17:02 »

half plate 1800 is some dank **** my dude

hineybush · « **Reply #98 on:** Mon, 09 July 2018, 13:29:11 »

Still waiting on some quotations. Hoping to get a proto ordered after my h87a buy happens.

BobCarltheThird · « **Reply #99 on:** Mon, 16 July 2018, 17:12:21 »

Will this have an order limit or can anyone that wants in get one?

News:

Author Topic: [IC] hbcp - hineybush compact (Read 146730 times)