Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624480 times)

swill · « **Reply #4400 on:** Fri, 20 March 2015, 09:40:20 »

Someone just asked me where these PCBs were made and I am completely blanking on this. Who did we use to actually get the PCBs printed?

SpAmRaY · « **Reply #4401 on:** Fri, 20 March 2015, 09:55:56 »

Quote from: swill on Fri, 20 March 2015, 09:40:20

Someone just asked me where these PCBs were made and I am completely blanking on this. Who did we use to actually get the PCBs printed?

I know it was in China but that probably isn't specific enough, my searchfu is weak this morning. I wanna say maybe pcbwing but that might have just been the phantom.

swill · « **Reply #4402 on:** Fri, 20 March 2015, 09:58:13 »

Quote from: SpAmRaY on Fri, 20 March 2015, 09:55:56

Quote from: swill on Fri, 20 March 2015, 09:40:20
Someone just asked me where these PCBs were made and I am completely blanking on this. Who did we use to actually get the PCBs printed?

I know it was in China but that probably isn't specific enough, my searchfu is weak this morning.

OK. Fair enough.

jdcarpe · « **Reply #4403 on:** Fri, 20 March 2015, 10:38:26 »

Quote from: SpAmRaY on Fri, 20 March 2015, 09:55:56

Quote from: swill on Fri, 20 March 2015, 09:40:20
Someone just asked me where these PCBs were made and I am completely blanking on this. Who did we use to actually get the PCBs printed?

I know it was in China but that probably isn't specific enough, my searchfu is weak this morning. I wanna say maybe pcbwing but that might have just been the phantom.

Pretty sure it WASN'T pcbwing, but I can't remember now who it was. Komar would know for sure.

mkawa · « **Reply #4404 on:** Fri, 20 March 2015, 10:40:47 »

pcbcart

swill · « **Reply #4405 on:** Fri, 20 March 2015, 10:41:22 »

Quote from: jdcarpe on Fri, 20 March 2015, 10:38:26

Quote from: SpAmRaY on Fri, 20 March 2015, 09:55:56
Quote from: swill on Fri, 20 March 2015, 09:40:20
Someone just asked me where these PCBs were made and I am completely blanking on this. Who did we use to actually get the PCBs printed?

I know it was in China but that probably isn't specific enough, my searchfu is weak this morning. I wanna say maybe pcbwing but that might have just been the phantom.

Pretty sure it WASN'T pcbwing, but I can't remember now who it was. Komar would know for sure.

No worries. He was asking who we use for PCB printing. I pointed him to OshPark since his job is pretty small...

swill · « **Reply #4406 on:** Fri, 20 March 2015, 10:43:05 »

Quote from: mkawa on Fri, 20 March 2015, 10:40:47

pcbcart

Thanks dude.

chel- · « **Reply #4407 on:** Fri, 20 March 2015, 21:54:14 »

Quote from: elton5354 on Fri, 20 March 2015, 09:32:00

Is TJ only doing US? Komars shipping to CA as well for international?

This is what I'm wondering too. I need to change my address.

komar007 · « **Reply #4408 on:** Mon, 23 March 2015, 13:47:59 »

Quote from: elton5354 on Fri, 20 March 2015, 09:32:00

Is TJ only doing US? Komars shipping to CA as well for international?

Our original settlements were: TJ - US + Canada, myself - rest of the world

metafour · « **Reply #4409 on:** Wed, 25 March 2015, 10:02:09 »

nubbinator · « **Reply #4410 on:** Wed, 25 March 2015, 10:40:53 »

Quote from: metafour on Wed, 25 March 2015, 10:02:09

Show Image

domoaligato · « **Reply #4411 on:** Wed, 25 March 2015, 22:17:42 »

Glissant · « **Reply #4412 on:** Thu, 26 March 2015, 18:15:30 »

pix3l_fodder · « **Reply #4413 on:** Thu, 26 March 2015, 18:20:53 »

Komar007, any updates on this or ETA once stabs arrive? I have every part bar the PCB now!

nubbinator · « **Reply #4414 on:** Sat, 28 March 2015, 20:10:00 »

fydo · « **Reply #4415 on:** Mon, 30 March 2015, 10:24:19 »

Hi there! I'm moving to a new place on May 1st (same city, so shipping costs are the same) who should I send my updated address to? Unless of course shipping is happening very soon and I'll get my stuff before May 1...

Glissant · « **Reply #4416 on:** Mon, 30 March 2015, 15:34:38 »

fydo, tjcaustin is dealing with US+Canada, so I'd suggest sending him the updated info.

komar007 · « **Reply #4417 on:** Mon, 30 March 2015, 15:50:13 »

Quote from: pix3l_fodder on Thu, 26 March 2015, 18:20:53

Komar007, any updates on this or ETA once stabs arrive? I have every part bar the PCB now!

Can't tell you the ETA from then, but when I get the stabs and plates, I'll do my best to organize it fast;)

BunnyLake · « **Reply #4418 on:** Mon, 30 March 2015, 20:13:33 »

Quote from: komar007 on Mon, 30 March 2015, 15:50:13

Quote from: pix3l_fodder on Thu, 26 March 2015, 18:20:53
Komar007, any updates on this or ETA once stabs arrive? I have every part bar the PCB now!

Can't tell you the ETA from then, but when I get the stabs and plates, I'll do my best to organize it fast;)

thanks man cant wait

RickyJ · « **Reply #4419 on:** Mon, 30 March 2015, 21:19:05 »

Quote from: fydo on Mon, 30 March 2015, 10:24:19

Hi there! I'm moving to a new place on May 1st (same city, so shipping costs are the same) who should I send my updated address to? Unless of course shipping is happening very soon and I'll get my stuff before May 1...

Quote from: tjcaustin on Tue, 25 November 2014, 01:57:51

https://docs.google.com/spreadsheets/d/1-lBJlTdauVcQHwEUY45BxDDy-QEKVCBu0oDNDG_qzRk/edit?usp=sharing

Check your order here.

http://goo.gl/forms/koFeGiUzL1

Notate any errors here.

This is what I used to change my address. I don't know if I'm supposed to get a confirmation somehow though.

metafour · « **Reply #4420 on:** Wed, 01 April 2015, 02:15:52 »

Stabs were shipped via Pony Express?

And for the love of all that is holy, do not April Fools us with the idea that you've shipped everyone's orders.

heedpantsnow · « **Reply #4421 on:** Wed, 01 April 2015, 10:46:19 »

Quote from: metafour on Wed, 01 April 2015, 02:15:52

Stabs were shipped via Pony Express?

And for the love of all that is holy, do not April Fools us with the idea that you've shipped everyone's orders.

I had thought about this but I do think the delay is a bit too touchy of a subject for April Fools.

swill · « **Reply #4422 on:** Wed, 01 April 2015, 10:57:35 »

Quote from: heedpantsnow on Wed, 01 April 2015, 10:46:19

Quote from: metafour on Wed, 01 April 2015, 02:15:52
Stabs were shipped via Pony Express?

And for the love of all that is holy, do not April Fools us with the idea that you've shipped everyone's orders.

I had thought about this but I do think the delay is a bit too touchy of a subject for April Fools.

Haha, I even typed up a response to him saying "You haven't gotten your shipping notice? I got mine last week.", but I also thought it would be a bit too much of a touchy subject to pull the April 1st stuff on.

duq · « **Reply #4423 on:** Wed, 01 April 2015, 15:41:41 »

Sent PMs to update my shipping address. Moving again, for the third time.

metafour · « **Reply #4424 on:** Thu, 02 April 2015, 03:14:37 »

Quote from: swill on Wed, 01 April 2015, 10:57:35

Quote from: heedpantsnow on Wed, 01 April 2015, 10:46:19
Quote from: metafour on Wed, 01 April 2015, 02:15:52
Stabs were shipped via Pony Express?

And for the love of all that is holy, do not April Fools us with the idea that you've shipped everyone's orders.

I had thought about this but I do think the delay is a bit too touchy of a subject for April Fools.

Haha, I even typed up a response to him saying "You haven't gotten your shipping notice? I got mine last week.", but I also thought it would be a bit too much of a touchy subject to pull the April 1st stuff on.

As if anyone who received a shipping notice about this group would stay quiet about it.

When shipping starts happening this thread is going to be off the hook!

Glissant · « **Reply #4425 on:** Thu, 02 April 2015, 09:16:07 »

Oh look another notification about nothing.

pix3l_fodder · « **Reply #4426 on:** Thu, 02 April 2015, 14:56:31 »

Thank you for the update, i don't mind the time it is taking just would like to know the group buy hasn't been forgotten about!

nubbinator · « **Reply #4427 on:** Sun, 05 April 2015, 16:18:09 »

HannibalChew · « **Reply #4428 on:** Mon, 06 April 2015, 17:15:13 »

I'll be selling my GH60 when it arrives as i've made the switch to topre. If anyone is interested let me know.

Glod · « **Reply #4429 on:** Mon, 06 April 2015, 22:03:00 »

Quote from: nubbinator on Sun, 05 April 2015, 16:18:09

Show Image

Sure feels that way

pix3l_fodder · « **Reply #4430 on:** Tue, 07 April 2015, 05:38:23 »

Anyone know who the stabs are being delivered to and does Ivan know if they have been delivered yet?

Fire Brand · « **Reply #4431 on:** Tue, 07 April 2015, 05:43:44 »

Quote from: PixelScript on Mon, 06 April 2015, 17:15:13

I'll be selling my GH60 when it arrives as i've made the switch to topre. If anyone is interested let me know.

I'm interested sent you a pm bud

Glissant · « **Reply #4432 on:** Tue, 07 April 2015, 10:57:06 »

This is ridiculous.

SpAmRaY · « **Reply #4433 on:** Tue, 07 April 2015, 10:58:11 »

Maybe demik's absence is because he's helping TJ get all this sorted out.

azhdar · « **Reply #4434 on:** Tue, 07 April 2015, 11:00:47 »

Quote from: SpAmRaY on Tue, 07 April 2015, 10:58:11

Maybe demik's absence is because he's helping TJ get all this sorted out.

Don't think he'd want to touch any cherry peasantry

nubbinator · « **Reply #4435 on:** Tue, 07 April 2015, 11:05:28 »

metafour · « **Reply #4436 on:** Tue, 07 April 2015, 21:57:30 »

Ivan could probably let us know if the stabs were delivered.

bueller · « **Reply #4437 on:** Tue, 07 April 2015, 22:05:16 »

Quote from: nubbinator on Tue, 07 April 2015, 11:05:28

Show Image

PCB's have been finished for like a year now right?

nubbinator · « **Reply #4438 on:** Tue, 07 April 2015, 22:23:36 »

Quote from: bueller on Tue, 07 April 2015, 22:05:16

Quote from: nubbinator on Tue, 07 April 2015, 11:05:28
Show Image

PCB's have been finished for like a year now right?

And the plates and stabs should be at least to TJ by now, yet we continue to get no updates and no timeline for when things will happen.

I feel like I've been *****y about a lot of stuff of late, but it feels like there's just been so much bull**** needing to be called out. This is by far the biggest bit of bull****. At this point, TJ took my money about two years ago. People were all over Sprit when he gave more updates and most people hadn't even waited a year. Hell, even Toxic is practically done (aside from the USB cables) and that suffered through silence and the US distributor practically going AWOL.

I just want my investment in this to be treated with respect. And with no updates since November of last year, I'm feeling pretty disrespected.

bueller · « **Reply #4439 on:** Tue, 07 April 2015, 22:29:04 »

Quote from: nubbinator on Tue, 07 April 2015, 22:23:36

Quote from: bueller on Tue, 07 April 2015, 22:05:16
Quote from: nubbinator on Tue, 07 April 2015, 11:05:28
Show Image

PCB's have been finished for like a year now right?

And the plates and stabs should be at least to TJ by now, yet we continue to get no updates and no timeline for when things will happen.

I feel like I've been *****y about a lot of stuff of late, but it feels like there's just been so much bull**** needing to be called out. This is by far the biggest bit of bull****. At this point, TJ took my money about two years ago. People were all over Sprit when he gave more updates and most people hadn't even waited a year. Hell, even Toxic is practically done (aside from the USB cables) and that suffered through silence and the US distributor practically going AWOL.

I just want my investment in this to be treated with respect. And with no updates since November of last year, I'm feeling pretty disrespected.

Totally agree, if it was me I'd be jumping up and down like crazy.

I've noticed TJ has no problem posting in other threads so it's pretty BS that he just ignores this.

ApocalypseMaow · « **Reply #4440 on:** Tue, 07 April 2015, 22:38:32 »

Well, I thought I was helping this project along... Sorry I couldn't do more dudes!!!

Maybe by XMas??? :/

nubbinator · « **Reply #4441 on:** Tue, 07 April 2015, 22:50:55 »

Quote from: ApocalypseMaow on Tue, 07 April 2015, 22:38:32

Well, I thought I was helping this project along... Sorry I couldn't do more dudes!!!

Maybe by XMas??? :/

You do what you can, but you're not the leader or the one with everything on hand.

As for Christmas, right now it's been 680 days since I've paid. Christmas would be 942 days, which is just shy of 2 years and 7 months. Unless you're a government or military contractor, a year and a half project overrun on a year long project (or, from the OP, a three to six month project from payment date with a 2 year plus overrun) is beyond unacceptable, especially when there are no updates ever in this thread.

I just want an update with a timeline instead of absolute silence and, the few times anything has actually been said, getting fed the same bull**** over and over. I'm sure others are in the same boat, but they just aren't willing to pipe up.

metafour · « **Reply #4442 on:** Wed, 08 April 2015, 00:25:02 »

Were pics of the received parts ever posted?

ApocalypseMaow · « **Reply #4443 on:** Wed, 08 April 2015, 00:52:50 »

Quote from: metafour on Wed, 08 April 2015, 00:25:02

Were pics of the received parts ever posted?

of the plates but I think that was it.

pix3l_fodder · « **Reply #4444 on:** Wed, 08 April 2015, 12:54:28 »

I do hope we don't need another take over of the group buy

Glod · « **Reply #4445 on:** Wed, 08 April 2015, 18:48:23 »

Even isis gives proof of life of their hostages. For all we know the pcbs have been left in extreme temperatures and dampness. Give this a few more weeks and I'm pretty sure people will start calling this a scam

billnye · « **Reply #4446 on:** Wed, 08 April 2015, 18:51:47 »

Quote from: ApocalypseMaow on Tue, 07 April 2015, 22:38:32

Well, I thought I was helping this project along... Sorry I couldn't do more dudes!!!

Maybe by XMas??? :/

<3

pasph · « **Reply #4447 on:** Wed, 08 April 2015, 18:55:10 »

Quote from: ApocalypseMaow on Tue, 07 April 2015, 22:38:32

Well, I thought I was helping this project along... Sorry I couldn't do more dudes!!!

Maybe by XMas??? :/

What year?

heedpantsnow · « **Reply #4448 on:** Wed, 08 April 2015, 18:58:09 »

Maybe he should just pack it all up and ship it to somebody trustworthy? I'm not even in this, and I'd pitch in a few bucks for that.

BunnyLake · « **Reply #4449 on:** Wed, 08 April 2015, 19:11:27 »

Quote from: heedpantsnow on Wed, 08 April 2015, 18:58:09

Maybe he should just pack it all up and ship it to somebody trustworthy? I'm not even in this, and I'd pitch in a few bucks for that.

its not that simple

the real bulk of the work isnt jsut shipping this stuff out, its all the smd and build work

its a huge and daunting thing to organise, let alone start

im sure now all the parts are coming together, TJ will be working out how he is gonna attack this, and once he is ready will finally update here

i think people should take a step back, and realise the environment they are creating here, and how hard it must be for TJ to come in to it and post the updates everyone wants

its pretty clear that all the parts are either on hand now, or about to be, this is when the clocks starts, give the man a chance to get this together, and judge him from this point forward

GH60 rev. B w/ ali's case	\|	Cherry G80-3000 HFU/05	\|	IBM Model M (51G8572)

News:

Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624480 times)