Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624576 times)

jdcarpe · « **Reply #1800 on:** Tue, 28 May 2013, 16:21:34 »

Switches bought through this GB will ALL be PCB mount (MX1A-xxxx/NW). Even if you specified plate mount, you're getting PCB mount switches, as we stated long ago this would be the default and only option.

Latin00032 · « **Reply #1801 on:** Tue, 28 May 2013, 16:24:52 »

I thought they were pcb mounted but pate supported. If that makes any sense.

esoomenona · « **Reply #1802 on:** Tue, 28 May 2013, 16:26:56 »

PCB mount or plate mount are just colloquial names assigned to the fact that one has mounting pins and the other does not. All switches from this GB will be PCB mount switches.

If you're discussing the actual mounting of them, the PCB supports the mounting pins, and plates support either/or. I think it's important for the switches here to be PCB mount, seeing as the PCB supports it, and because not everyone is going to use a plate.

jdcarpe · « **Reply #1803 on:** Tue, 28 May 2013, 16:29:32 »

Quote from: Latin00032 on Tue, 28 May 2013, 16:24:52

I thought they were pcb mounted but pate supported. If that makes any sense.

All MX switches mount to a plate with no issues. These have the two plastic pins for PCB mounting on supported PCBs (of which the GH60 PCB is one). If you want to mount these PCB-mount switches on a PCB that doesn't have the proper holes for the plastic pins, you just snip off the plastic pins and proceed. Plate or no plate, you can use these switches with the GH60 PCB.

Muffet · « **Reply #1804 on:** Tue, 28 May 2013, 16:52:04 »

Quote from: nebo on Tue, 28 May 2013, 15:47:35

Contemplating if I want to deal with LEDs considering I don't have keys for backlighting.

Wait, what keys besides caps can have leds?!
[/quote]

Woopsie! I meant caps, not keys, silly me.

Leslieann · « **Reply #1805 on:** Tue, 28 May 2013, 16:52:55 »

Quote from: Latin00032 on Tue, 28 May 2013, 16:24:52

I thought they were pcb mounted but pate supported. If that makes any sense.

All are plate supported.
The only difference is extra pcb supports on the pcb ones.

If a board has the holes, you are better off using them, if it does not, you can always grind them off.

osxoep · « **Reply #1806 on:** Tue, 28 May 2013, 17:00:18 »

Quote from: osxoep on Tue, 28 May 2013, 08:18:22

ow my bank account.
paid

edit: hang on. My order was changed on the sheet.
I ordered 2 PCBs, 1 ISO 1.5x Pure Shift + PCB and Plate stabs and 65x MX greens.
But the order sheet says a "true" HHKB plate.

tjcaustin could you have a look at this?

mashby · « **Reply #1807 on:** Tue, 28 May 2013, 17:19:18 »

Paid.

domoaligato · « **Reply #1808 on:** Tue, 28 May 2013, 18:11:40 »

Quote from: esoomenona on Tue, 28 May 2013, 15:53:59

That layout is possible. That would be the Max Keys plate, though the Left shift and the key next to it would be switched around. Or you could just do it without a plate.

I thought the Universal ANSI plate could do all the layouts including the max keys layout?
My main concern was the pcb switch positions. Thanks!

gnubag · « **Reply #1809 on:** Tue, 28 May 2013, 18:22:48 »

Quote from: domoaligato on Tue, 28 May 2013, 18:11:40

Quote from: esoomenona on Tue, 28 May 2013, 15:53:59
That layout is possible. That would be the Max Keys plate, though the Left shift and the key next to it would be switched around. Or you could just do it without a plate.

I thought the Universal ANSI plate could do all the layouts including the max keys layout?
My main concern was the pcb switch positions. Thanks!

if i see it correctly your enter and scroll lock don't work out. the 1u would be on the left and the 1.25 on the right

MKULTRA · « **Reply #1810 on:** Tue, 28 May 2013, 20:29:28 »

WOW that invoice. Whew. Will pay shortly.

EDIT: I also ordered assembly, I don't see that on my invoice?

Latin00032 · « **Reply #1811 on:** Tue, 28 May 2013, 20:42:03 »

I meant to include the plate mounted stabilizer set. I can't tell if it was included. I don't think it was and I was already invoiced.

I'm petty sure that's the only thing I'm missing.

Trueno86 · « **Reply #1812 on:** Tue, 28 May 2013, 21:05:50 »

Paid! Thanks for all the hard work!

mkaito · « **Reply #1813 on:** Wed, 29 May 2013, 00:22:23 »

Just received the invoice. It's due immediately? I'll need 2-5 days to move money around before I can send payment. I'm a couple dollars short on my Paypal balance.

Thank you for your hard work!

4LI4Z · « **Reply #1814 on:** Wed, 29 May 2013, 04:05:58 »

Where are we supposed to get that invoice, via email or on geekhack?
Because I haven't got anything by now and the list says I'm invoiced.

zoidbergslo · « **Reply #1815 on:** Wed, 29 May 2013, 05:53:42 »

check your paypal account

GeorgeK · « **Reply #1816 on:** Wed, 29 May 2013, 06:30:46 »

I've found in the past that I've had invoices to pay in my paypal account that I hadn't been notified about any other way...

4LI4Z · « **Reply #1817 on:** Wed, 29 May 2013, 10:57:52 »

Alright, thank you. Paid!

nebo · « **Reply #1818 on:** Wed, 29 May 2013, 11:13:30 »

This is my pending layout, was going to go for a hhkb style but I really do need the arrow keys and I don't want them on a fn layer... Suggestions open, I'll post the firmware whenever I have my board and it is working if people want it.

http://imgur.com/XOc822j

simkev · « **Reply #1819 on:** Wed, 29 May 2013, 11:58:54 »

elton5354 · « **Reply #1820 on:** Wed, 29 May 2013, 12:06:20 »

Can I add more to my order if I already paid?

jdcarpe · « **Reply #1821 on:** Wed, 29 May 2013, 13:22:23 »

Quote from: elton5354 on Wed, 29 May 2013, 12:06:20

Can I add more to my order if I already paid?

Pretty sure we're firm on if you're paid already, your order is locked. But I sent you a PM and copied TJ, who is doing the invoicing.

Sorry for not replying earlier, I've been out of the office all morning on the road.

polarpigs · « **Reply #1822 on:** Wed, 29 May 2013, 14:48:31 »

Hi! My invoice had shipping (international price) added to it but I really dont know where I'll be by the time this ships (will be in California if it's September.) This caused my order to be 150.37 :/ Can I, instead, have a shipping invoice resent for when the board is ready to ship to me or when a shipping time is confirmed? Because I really don't want to pay extra if i'm going to be in the USA by the time this ships :/
Thanks~

jdcarpe · « **Reply #1823 on:** Wed, 29 May 2013, 14:52:25 »

Quote from: polarpigs on Wed, 29 May 2013, 14:48:31

Hi! My invoice had shipping (international price) added to it but I really dont know where I'll be by the time this ships (will be in California if it's September.) This caused my order to be 150.37 :/ Can I, instead, have a shipping invoice resent for when the board is ready to ship to me or when a shipping time is confirmed? Because I really don't want to pay extra if i'm going to be in the USA by the time this ships :/
Thanks~

Sent you a PM.

reality404 · « **Reply #1824 on:** Wed, 29 May 2013, 17:58:30 »

Paid thanks.

osxoep · « **Reply #1825 on:** Wed, 29 May 2013, 18:15:02 »

Quote from: osxoep on Tue, 28 May 2013, 08:18:22

edit: hang on. My order was changed on the sheet.
I ordered 2 PCBs, 1 ISO 1.5x Pure Shift + PCB and Plate stabs and 65x MX greens.
But the order sheet says a "true" HHKB plate.

Just wondering about this

tradet · « **Reply #1826 on:** Thu, 30 May 2013, 03:34:39 »

Paid!

Now there's only a few months of waiting left!

mkaito · « **Reply #1827 on:** Thu, 30 May 2013, 09:51:58 »

My bank worked fast for once, so money moved early. Just paid the invoice. Thanks for your work!

ETA is still at some point between July and September?

aggiejy · « **Reply #1828 on:** Thu, 30 May 2013, 10:14:16 »

It's been a couple days since I paid... still cringing when I hear footsteps as I'm pretty sure my wife is going to sneak up behind me with a Model M...

domoaligato · « **Reply #1829 on:** Thu, 30 May 2013, 11:00:35 »

Quote from: aggiejy on Thu, 30 May 2013, 10:14:16

It's been a couple days since I paid... still cringing when I hear footsteps as I'm pretty sure my wife is going to sneak up behind me with a Model M...

that is why I sold all my kbt race's

ApocalypseMaow · « **Reply #1830 on:** Thu, 30 May 2013, 13:33:17 »

Quote from: aggiejy on Thu, 30 May 2013, 10:14:16

It's been a couple days since I paid... still cringing when I hear footsteps as I'm pretty sure my wife is going to sneak up behind me with a Model M...

I haven't got mine yet, but I fear the wife seeing it... Glad my Filco case is plastic.

Glod · « **Reply #1831 on:** Thu, 30 May 2013, 15:43:38 »

Quote from: aggiejy on Thu, 30 May 2013, 10:14:16

It's been a couple days since I paid... still cringing when I hear footsteps as I'm pretty sure my wife is going to sneak up behind me with a Model M...

i lol'd because my wife doesn't know yet that i got these and i'm sure she wouldn't be happy if she found out!

---

honestly the bill wasn't that bad, i didn't register in how expensive the cherry stabs would be until i got the bill but when you take those out this was a damn good deal for how much i got.

bravo to the GH60 team and good luck!

Laladila · « **Reply #1832 on:** Thu, 30 May 2013, 17:10:45 »

Mmm I didn't receive my invoice can you check please ?

TIA

mauri · « **Reply #1833 on:** Thu, 30 May 2013, 17:13:09 »

Quote from: Laladila on Thu, 30 May 2013, 17:10:45

Mmm I didn't receive my invoice can you check please ?

TIA

Not all the invoices are sent yet, the order confirmation sheet has invoicing column but can't tell if it's in realtime

Laladila · « **Reply #1834 on:** Thu, 30 May 2013, 17:15:40 »

Oups I missed that info thanks for the info I'm gonnna check the Confirmation list

domoaligato · « **Reply #1835 on:** Thu, 30 May 2013, 18:03:22 »

Quote from: gnubag on Tue, 28 May 2013, 18:22:48

Quote from: domoaligato on Tue, 28 May 2013, 18:11:40
Quote from: esoomenona on Tue, 28 May 2013, 15:53:59
That layout is possible. That would be the Max Keys plate, though the Left shift and the key next to it would be switched around. Or you could just do it without a plate.

I thought the Universal ANSI plate could do all the layouts including the max keys layout?
My main concern was the pcb switch positions. Thanks!

if i see it correctly your enter and scroll lock don't work out. the 1u would be on the left and the 1.25 on the right

Thanks! I will probably go with the gh60 max keys layout with the mx locks until I can determine if the layout works for me.
I am a die-hard counterstrike player. (since 1.3!) this is for cs + voice chat. the toggles are for voice toggle basically.

beauthegamer · « **Reply #1836 on:** Fri, 31 May 2013, 01:34:26 »

Paid. Anticipation rising!

gnubag · « **Reply #1837 on:** Fri, 31 May 2013, 01:41:53 »

done and done

battletux · « **Reply #1838 on:** Fri, 31 May 2013, 01:42:33 »

Paid!

Can't wait for the bits to get here. Now to source a case and keys for them.

LechnerDE · « **Reply #1839 on:** Fri, 31 May 2013, 02:24:06 »

Just got my invoice and paid it.

One question though:

I ordered 2 different plates and chose 1x assembly service. I wrote in the order form which of the two I want to have assembled, but this information doesn't show in the confirmation spread sheet anymore.

How does the assembly guy know which switches to solder on which PCB/plate combo?

Dsan · « **Reply #1840 on:** Fri, 31 May 2013, 02:39:33 »

Paid,thank you!

tjcaustin · « **Reply #1841 on:** Fri, 31 May 2013, 02:42:00 »

Quote from: LechnerDE on Fri, 31 May 2013, 02:24:06

Just got my invoice and paid it.

One question though:

I ordered 2 different plates and chose 1x assembly service. I wrote in the order form which of the two I want to have assembled, but this information doesn't show in the confirmation spread sheet anymore.

How does the assembly guy know which switches to solder on which PCB/plate combo?

This:

I want 1 board with these specifications assembled by you guys:

1x GH60 PCB
1x ISO 1,25 Plate
1x Costar stabs, Plate-mounted

+ white Cherry MX switches ordered via 7Bit on Deskthority.net

The rest of my order is for me to build a second board:

1x GH 60
1x ISO universal plate
1x Costar stabs, Plate-mounted
1x PCB mounted cherry stabs (spacebar 6,25)

is still in the comments.

Tranquilite · « **Reply #1842 on:** Fri, 31 May 2013, 02:46:34 »

Paid. I was secretly hoping the shipping cost would be cheaper because I only purchased a PCB, but them's the breaks. At least i can rest assured that mine will most likely ship sooner because I didn't order any plates/extras.

LechnerDE · « **Reply #1843 on:** Fri, 31 May 2013, 02:51:08 »

Quote from: tjcaustin on Fri, 31 May 2013, 02:42:00

Quote from: LechnerDE on Fri, 31 May 2013, 02:24:06
Just got my invoice and paid it.

One question though:

I ordered 2 different plates and chose 1x assembly service. I wrote in the order form which of the two I want to have assembled, but this information doesn't show in the confirmation spread sheet anymore.

How does the assembly guy know which switches to solder on which PCB/plate combo?

This:

I want 1 board with these specifications assembled by you guys:

1x GH60 PCB
1x ISO 1,25 Plate
1x Costar stabs, Plate-mounted

+ white Cherry MX switches ordered via 7Bit on Deskthority.net

The rest of my order is for me to build a second board:

1x GH 60
1x ISO universal plate
1x Costar stabs, Plate-mounted
1x PCB mounted cherry stabs (spacebar 6,25)

is still in the comments.

Good, this is still in there

Thanks for replying so fast!

bugsaint · « **Reply #1844 on:** Fri, 31 May 2013, 03:07:00 »

Invoice recieved, however my shipping costs are $21? Isn't my board being assembled and shipped within the EU from komar? Switches were ordered from 7bit.

Kmynis · « **Reply #1845 on:** Fri, 31 May 2013, 03:31:00 »

Already paid. Really excited about this little adventure

pasph · « **Reply #1846 on:** Fri, 31 May 2013, 03:39:17 »

cyberwave · « **Reply #1847 on:** Fri, 31 May 2013, 03:41:27 »

wow! shipping for this little monster costs a bomb!

GeorgeK · « **Reply #1848 on:** Fri, 31 May 2013, 03:53:10 »

Just received my invoice, thanks. Can I double (triple) check that where it says 'GH60 plate' that is in fact an ANSI Universal plate? Once that's confirmed I'll pay straight away - thanks.

George

bugsaint · « **Reply #1849 on:** Fri, 31 May 2013, 04:25:00 »

PAID

Quote from: bugsaint on Fri, 31 May 2013, 03:07:00

Invoice recieved, however my shipping costs are $21? Isn't my board being assembled and shipped within the EU from komar? Switches were ordered from 7bit.

News:

Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624576 times)