Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624592 times)

metalliqaz · « **Reply #1850 on:** Fri, 31 May 2013, 06:11:51 »

I just got an invoice... But I didn't order anything

GeorgeK · « **Reply #1851 on:** Fri, 31 May 2013, 06:33:20 »

Paid! I'm sure my question above will be sorted

limmy · « **Reply #1852 on:** Fri, 31 May 2013, 06:52:01 »

I got the invoice. I put down a Korean address and I was asked to pay $28 for the shipping. I was expecting much less reading the following post on shipping. Was the post relevant for EU countries only?

Quote from: komar007 on Thu, 21 March 2013, 06:25:01

Shipping to EU will be from EU, most probably from me. Depending on the country and availability of tracking it will be between $8 and $18 (assuming < 1kg per package)

May I ask what has changed since and from where my package is sent? I do not see any information on shipping in the OP. I understand there is a lot of uncertainty, but I would appreciate any information, at least information you used to come up with the current quote. Thank you.

Lumune · « **Reply #1853 on:** Fri, 31 May 2013, 07:15:20 »

Number of Cherry Stabilizers on the invoice not matching that on the spreadsheet, replied to the invoice email to T.J.
p.s. OMG... $32 to ship to Australia

agor · « **Reply #1854 on:** Fri, 31 May 2013, 08:01:12 »

Paid!

boost · « **Reply #1855 on:** Fri, 31 May 2013, 08:06:55 »

Wfd,

I put in for a order change but got an invoice for my old order

Kabuks · « **Reply #1856 on:** Fri, 31 May 2013, 08:48:36 »

I got my invoice but haven't paid yet and I'm wondering if its possible to add an extra PCB (SMD presoldered) to my order?
If so let me know who to PM.

Acanthophis · « **Reply #1857 on:** Fri, 31 May 2013, 08:54:00 »

Did all invoices get out already?
Never received one so far...

HannibalChew · « **Reply #1858 on:** Fri, 31 May 2013, 09:05:53 »

I haven't got an invoice yet, have they all gone out?

thoere · « **Reply #1859 on:** Fri, 31 May 2013, 09:08:50 »

I got my invoice, but it says payment due... yesterday. Can I still pay the invoice? If so, when should I pay by?

Turkishrambo · « **Reply #1860 on:** Fri, 31 May 2013, 09:15:27 »

Quote from: thoere on Fri, 31 May 2013, 09:08:50

I got my invoice, but it says payment due... yesterday. Can I still pay the invoice? If so, when should I pay by?

Dont worry u have time. I dont think theres an exact date but u have plenty of time. Alot of invoices havnt gone out yet:P

Tarzan · « **Reply #1861 on:** Fri, 31 May 2013, 10:37:38 »

Paid.

Paranoid · « **Reply #1862 on:** Fri, 31 May 2013, 10:54:28 »

Quote from: PixelScript on Fri, 31 May 2013, 09:05:53

I haven't got an invoice yet, have they all gone out?

Quote from: Acanthophis on Fri, 31 May 2013, 08:54:00

Did all invoices get out already?
Never received one so far...

Check the Order Confirmation link in the OP. You can check if you've been invoiced and if the payment is processed

miscsubbin · « **Reply #1863 on:** Fri, 31 May 2013, 12:23:55 »

Paid! So excited!

TheFlyingRaccoon · « **Reply #1864 on:** Fri, 31 May 2013, 12:25:45 »

Invoice paid. Can't wait!

cyberwave · « **Reply #1865 on:** Fri, 31 May 2013, 14:42:54 »

I submitted a change. (dam my fickle mind!

)

Could one of you confirm that change before i pay the invoice?

Acanthophis · « **Reply #1866 on:** Fri, 31 May 2013, 16:07:29 »

Quote from: Paranoid on Fri, 31 May 2013, 10:54:28

Check the Order Confirmation link in the OP. You can check if you've been invoiced and if the payment is processed

Ah, didn't notice there is a column for that.
Thanks!

Lumune · « **Reply #1867 on:** Fri, 31 May 2013, 19:15:02 »

Got the updated invoice, paid.

ApocalypseMaow · « **Reply #1868 on:** Fri, 31 May 2013, 19:34:30 »

Got mah invoice!

gameaholic · « **Reply #1869 on:** Fri, 31 May 2013, 22:05:49 »

cgbuen · « **Reply #1870 on:** Sat, 01 June 2013, 02:12:16 »

Paid!

iMav · « **Reply #1871 on:** Sat, 01 June 2013, 07:16:17 »

PAID!

Just looked at the spreadsheet and see there is a "TRUE HHKB layout plate". I want to emulate the HHKB layout as much as possible (as it is my absolute favorite layout). I assume I want these plates instead of the ANSI ones??

Can my order be modified?

Kabuks · « **Reply #1872 on:** Sat, 01 June 2013, 14:01:51 »

Paid invoice.

spdx · « **Reply #1873 on:** Sat, 01 June 2013, 16:25:38 »

Paid. Thanks for all the efforts to make this happen.

samwisekoi · « **Reply #1874 on:** Sat, 01 June 2013, 16:48:11 »

Paid revised invoice. Thanks very much!

- Ron | samwisekoi

jdcarpe · « **Reply #1875 on:** Sat, 01 June 2013, 18:46:44 »

Quote from: iMav on Sat, 01 June 2013, 07:16:17

PAID!

Just looked at the spreadsheet and see there is a "TRUE HHKB layout plate". I want to emulate the HHKB layout as much as possible (as it is my absolute favorite layout). I assume I want these plates instead of the ANSI ones??

Can my order be modified?

I don't think that would be a problem. Just PM WFD with that info, since he will be ordering the plates.

fydo · « **Reply #1876 on:** Sat, 01 June 2013, 18:57:33 »

Awesome! Just got my invoice and paid! Super excited about GH60, and looking forward to when the GH10 (or whatever you're calling it now) GB starts.

EDIT: TJ, I just noticed the wrong plate is on my invoice. Should be a Poker plate. Thanks!

HannibalChew · « **Reply #1877 on:** Sat, 01 June 2013, 18:58:24 »

Just paid my invoice! It didn't seem to indicate anywhere that it included shipping, is this normal?

tadbitnerdy · « **Reply #1878 on:** Sat, 01 June 2013, 19:06:30 »

Paid!

Jocelyn · « **Reply #1879 on:** Sat, 01 June 2013, 19:11:56 »

Paid, but please don't ship my order until speaking with me first

Quote from: fydo on Sat, 01 June 2013, 18:57:33

EDIT: TJ, I just noticed the wrong plate is on my invoice. Should be a Poker plate. Thanks!

Both of mine (Poker & Ansi Universal) just said GH60 Plate

tjcaustin · « **Reply #1880 on:** Sat, 01 June 2013, 19:23:40 »

Quote from: PixelScript on Sat, 01 June 2013, 18:58:24

Just paid my invoice! It didn't seem to indicate anywhere that it included shipping, is this normal?

I see $5 for basic shipping, sir.

And for those that may have missed, I have no need to individually list plate skus as I'm not having anything to do with the actual ordering, just fund collection.

HannibalChew · « **Reply #1881 on:** Sat, 01 June 2013, 19:26:18 »

Quote from: tjcaustin on Sat, 01 June 2013, 19:23:40

I see $5 for basic shipping, sir.

And for those that may have missed, I have no need to individually list plate skus as I'm not having anything to do with the actual ordering, just fund collection.

ah ha! I must have missed that.

electrogeek007 · « **Reply #1882 on:** Sat, 01 June 2013, 20:34:27 »

Paid!

whiteduck · « **Reply #1883 on:** Sat, 01 June 2013, 20:51:33 »

Paid! Don't know what I'm going to do about switches tho....

salmo · « **Reply #1884 on:** Sat, 01 June 2013, 20:59:39 »

And paid!

fydo · « **Reply #1885 on:** Sat, 01 June 2013, 21:58:36 »

Quote from: tjcaustin on Sat, 01 June 2013, 19:23:40

And for those that may have missed, I have no need to individually list plate skus...

Oops, I had missed that! Thanks for the heads up!

bear95 · « **Reply #1886 on:** Sat, 01 June 2013, 23:14:26 »

PAID

but I realized I payed with wrong paypal shipping address but the address I submitted to geekhack is correct. This should not mess things up, right?

orlando · « **Reply #1887 on:** Sun, 02 June 2013, 00:41:56 »

Paid!

tjcaustin · « **Reply #1888 on:** Sun, 02 June 2013, 01:11:05 »

All invoices sent out.

Sai · « **Reply #1889 on:** Sun, 02 June 2013, 01:12:55 »

Paranoid · « **Reply #1890 on:** Sun, 02 June 2013, 02:37:33 »

Hey tjcaustin,

I actually made a little order change yesterday for updating the amount of stabilizers, but I guess it hasn't been updated in the invoice yet. Is it still possible to change it from one to three cherry plate mounted stabilizers? (two 7x, one 6.25x)

Other than that, I'm completely ready to pay ^^

*Aaaand paid! Thanks for the quick fix

TheQsanity · « **Reply #1891 on:** Sun, 02 June 2013, 03:03:14 »

Paid.

cyberwave · « **Reply #1892 on:** Sun, 02 June 2013, 03:42:45 »

Quote from: cyberwave on Fri, 31 May 2013, 14:42:54

I submitted a change. (dam my fickle mind! )

Could one of you confirm that change before i pay the invoice?

anyone?

kdash4 · « **Reply #1893 on:** Sun, 02 June 2013, 03:59:13 »

Just got my invoice.
Wow I didn't expect this much. lol
I will pay tomorrow.

ApocalypseMaow · « **Reply #1894 on:** Sun, 02 June 2013, 04:05:03 »

Quote from: cyberwave on Sun, 02 June 2013, 03:42:45

Quote from: cyberwave on Fri, 31 May 2013, 14:42:54
I submitted a change. (dam my fickle mind! )

Could one of you confirm that change before i pay the invoice?

anyone?

Check the Order Confirmation.

stoic-lemon · « **Reply #1895 on:** Sun, 02 June 2013, 04:27:33 »

I have made payment. God speed you and your soldering irons.

cyberwave · « **Reply #1896 on:** Sun, 02 June 2013, 04:29:12 »

Quote from: ApocalypseMaow on Sun, 02 June 2013, 04:05:03

Quote from: cyberwave on Sun, 02 June 2013, 03:42:45
Quote from: cyberwave on Fri, 31 May 2013, 14:42:54
I submitted a change. (dam my fickle mind! )

Could one of you confirm that change before i pay the invoice?

anyone?
Check the Order Confirmation.

it hasn't been changed yet that's why

4814 · « **Reply #1897 on:** Sun, 02 June 2013, 05:12:14 »

Paid. Thank you for this great group buy!

mauri · « **Reply #1898 on:** Sun, 02 June 2013, 05:22:22 »

txepox · « **Reply #1899 on:** Sun, 02 June 2013, 05:27:07 »

Paid.

News:

Author Topic: GH60 Group Buy (Salvage Mode: Enabled - Update in OP) (Read 1624592 times)