GH60 Group Buy (Salvage Mode: Enabled - Update in OP)

[SpAmRaY]

21 if available


doh meant 22...stupid phone.

[gnubag]

if in the end nobody (who has not yet gotten a gh60) takes #34 I would like to combine it with my existing order.

[domoaligato]

I will pay for #10.

[tricheboars]

I will grab 9 or 10 and add it to my order if no one is interested. I would prefer it go to someone who really wanted to get in this but missed the deadline.

but if no one steps up i will take it.

[Qipz]

Paid

[osxoep]

Just a question, I have a GH60 order already will the extra one be sent separately (with the extra postage)?

[BlueBär]

If anybody want's to split an order or has ordered something he doesn't want anymore, I would be very interested in one of the following combinations:

GH60 PCB + poker or universal ansi plate + stabs
Pure or universal ansi plate + stabs

#29 is similar, but I have no need for a SWK plate and extra stabilizers.

See page 75, I got a different order.

[domoaligato]

I will pay for #10.

paid

[gnubag]

if in the end nobody (who has not yet gotten a gh60) takes #34 I would like to combine it with my existing order.

so if nobody takes #34 at the end of the day I will pay for it

[madderoftime]

17,27,33 if available

jabar got his 33 - glad it was cleared up

Paid for the other 2 just now.

I will need to purchase stabilizers and wires. Anyone know a source ATM?

[gnubag]

17,27,33 if available

jabar got his 33 - glad it was cleared up

Paid for the other 2 just now.

I will need to purchase stabilizers and wires. Anyone know a source ATM?

for cherry stabs contact wfd
costar go to wasd

[jdcarpe]

Mouser has Cherry plate mount stabs in stock, but only with 2x wires. Part number G99-0224. Each is for one switch, so if you have 5 stabilized switches as in a Poker, you need to order 5 qty.

You'll have to source spacebar wires.

[mauri]

Mouser has Cherry plate mount stabs in stock, but only with 2x wires. Part number G99-0224. Each is for one switch, so if you have 5 stabilized switches as in a Poker, you need to order 5 qty.

You'll have to source spacebar wires.

Now that you brought that up, have you any idea where to source cherry 6.0 wires? Apart from old cherries?

[jdcarpe]

Mouser has Cherry plate mount stabs in stock, but only with 2x wires. Part number G99-0224. Each is for one switch, so if you have 5 stabilized switches as in a Poker, you need to order 5 qty.

You'll have to source spacebar wires.

Now that you brought that up, have you any idea where to source cherry 6.0 wires? Apart from old cherries?

Nope. I get 10x spacebar wires from old WYSE boards and bend them myself.

[Qipz]

So, I bought the 1.25 iso plate, what else will I need to have a complete keyboard?
Case, USB cable & keycaps right?
Where can I get those, also I'd like to buy blank keycaps, do I need to look at anything in order to make sure I get some that match my switches?

[mauri]

So, I bought the 1.25 iso plate, what else will I need to have a complete keyboard?
Case, USB cable & keycaps right?
Where can I get those, also I'd like to buy blank keycaps, do I need to look at anything in order to make sure I get some that match my switches?

At least pexon and paranoid sell wires in europe, cases you can find in the op and keycaps, and well what comes to key caps there are group buys all the time and there are also quite a few vendors who sell ready key cap sets.

1.25 is the more common modifier size but still you'll have to make sure the caps you want have 1.25 unit mods and 6.25 spacebar

[Qipz]

At least pexon and paranoid sell wires in europe, cases you can find in the op and keycaps, and well what comes to key caps there are group buys all the time and there are also quite a few vendors who sell ready key cap sets.

1.25 is the more common modifier size but still you'll have to make sure the caps you want have 1.25 unit mods and 6.25 spacebar

Thanks for the quick reply.

[nubbinator]

So, I bought the 1.25 iso plate, what else will I need to have a complete keyboard?
Case, USB cable & keycaps right?
Where can I get those, also I'd like to buy blank keycaps, do I need to look at anything in order to make sure I get some that match my switches?

There are a couple community designed cases in the works, including metal and acrylic cases, and sometimes a Poker or Pure case pops up in the classifieds.

For USB cables, Paranoid and Pexon are EU/UK based and TJCaustin (Mimic cables) and I are U.S. based.  I can ship to Europe and I believe TJ will as well.

Blank key caps can be gotten from many places with for standard layout.  Check out WASDkeyboards if you want something super cheap, there's some stuff on eBay, there's Signature Plastics,  there are group buys, you have people like Feng who have their own webstores, and, if you're feeling adventurous, you can check out Taobao.

[SpAmRaY]

TJ got it sorted! Thanks! Paid!

[madderoftime]

Mouser has Cherry plate mount stabs in stock, but only with 2x wires. Part number G99-0224. Each is for one switch, so if you have 5 stabilized switches as in a Poker, you need to order 5 qty.

You'll have to source spacebar wires.

So for a Pure I would need 4 sets of cherry stabs, 3 wires 2x, 1 wire for 6.25x spacebar? I don't understand the wires. Looking at the plate it looks like the stab placement is the same for 3 keys but I know the keys are not all the same size.
For the GH60 just one set of cherry stabs with 1 wire for a 6.25x spacebar?
Sorry this is the new part for me. Is there a wiki that explains how to determine that so I would not have to ask basic questions that might annoy? Thanks for the guidance.

[jdcarpe]

So for a Pure I would need 4 sets of cherry stabs, 3 wires 2x, 1 wire for 6.25x spacebar?

Correct.

I don't understand the wires. Looking at the plate it looks like the stab placement is the same for 3 keys but I know the keys are not all the same size.

The stab inserts are molded in the same place on all these keycaps, whether 2.00, 2.25, or 2.75.

For the GH60 just one set of cherry stabs with 1 wire for a 6.25x spacebar?

Correct. You've got it!

[gnubag]

well, since I haven't seen anybody who wants #34 here I will take it combined with my order (do you need my paypal again or can you look it up since it will be the same)

[Flamingchook]

I requested 23 yesterday but I haven't been contacted yet for payment... Has it already been taken?

[ApocalypseMaow]

I requested 23 yesterday but I haven't been contacted yet for payment... Has it already been taken?

Give it a day or so. JD and WFD are no doubt getting hammered with PM about this.

[dzreams]

I'm interested in row number 10, namely the one that sums to $44.

[gnubag]

I'm interested in row number 10, namely the one that sums to $44.

neverputyouremailonaforum@gmail.com.

you seriously should remove that email before the bots get you.

[BlueBär]

I'll take order #32 (PCB and two plates). Any way I could get a Cherry PCB mounted stabs package with that would be nice.

[domoaligato]

I'm interested in row number 10, namely the one that sums to $44.

i already paid for this and it is not updated on the spreadsheet

[tjcaustin]

I'm interested in row number 10, namely the one that sums to $44.

i already paid for this and it is not updated on the spreadsheet

FIXED.

[domoaligato]

thanks tj

[elton5354]

Can my order be updated as well?

[OddOne]

I'm interested in number 2 if it is still available.

Row 2 appears to be row 1 now, but I am still interested!

To be clear this includes the GH60 DIY Kit and Universal Iso Plate.

Thanks!

[tjcaustin]

Ok, I think I have everything caught up and notated

[dzreams]

I'm interested in row number 10, namely the one that sums to $44.

i already paid for this and it is not updated on the spreadsheet

FIXED.

Ok, can I take row 21, summing to $88.

[madderoftime]

Payment deadline has passed. If you haven't paid by now, consider your order canceled.

Open invoice orders are now posted for sale.

Here are the orders for sale. If you want to take over an order, post here in the thread with the row number from the spreadsheet. We will contact you for your info and to send an invoice. Payment will be expected immediately. Thanks! https://docs.google.com/spreadsheet/ccc?key=0Aj13Z1f7GUuzdGY0WlF1SjRkZ0VOVVpUMzV5bjg4dWc&usp=sharing

Need to remove the personal information in this sheet. Keep it but not public.

[gnubag]

paid for #34

also can yo please hide the address column from public? would be much appreciated.

[whiskytango]

Oh no, now the man knows where I live.

[nubbinator]

Oh no, now the man knows where I live.

Is it in Birmingham, Alabama?

[ApocalypseMaow]

Oh no, now the man knows where I live.

Is it in Birmingham, Alabama?

LOL

[tjcaustin]

Oh no, now the man knows where I live.

Is it in Birmingham, Alabama?

NOPE

It's Chuck Testa

[jabar]

it's really Dougal County, GA

[domoaligato]

i live in mountlake terrace wa and i am sitting in Elliot bay pizza company in mill creak wa drinking a pint of boulder beer co. 2012 honey of a saison. come join me lol. 

[ApocalypseMaow]

i live in mountlake terrace wa and i am sitting in Elliot bay pizza company in mill creak wa drinking a pint of boulder beer co. 2012 honey of a saison. come join me lol.

If only!

[whiskytango]

it's really Dougal County, GA

Haha, yes. Now if you'll excuse me, I have to go ride around in my truck boat truck

[The_Beast]

it's really Dougal County, GA

Haha, yes. Now if you'll excuse me, I have to go ride around in my truck boat truck

Huehuehue

[pix3l_fodder]

Jd, my order is only coming with two sets of cherry stabs is that not enough for both my keyboards? I was under the impression one set does one keyboard.  (I've ordered 2). Also do you need wires for the right shift and do they come with the sets?

[gnubag]

Jd, my order is only coming with two sets of cherry stabs is that not enough for both my keyboards? I was under the impression one set does one keyboard.  (I've ordered 2). Also do you need wires for the right shift and do they come with the sets?

http://geekhack.org/index.php?topic=41464.msg828889#msg828889
look at the third picture

1 set is enough for a ansi poker which has 5 stabilized keys ( 2x shift, backspace, enter, spacebar)
all wires are the same except for the spacebar.

[pix3l_fodder]

Ah so really one set is more than enough for an ISO KB. Thank you for clearing that up, it was just jd's comment at the top of the page got me worried. It did seem a little steep for $9 for one stabilised key.

[Flamingchook]

I'll pay for number 5 if it hasn't already been taken.

Edit: Sorry I have to withdraw that

[xauser]

I'll take order 31, thank you.