However, this bottle was not marked ‘poison,’ so Alice ventured to taste it... ‘What a curious feeling!’ said Alice; ‘I must be shutting up like a telescope.’
Alice thought the whole thing very absurd, but they all looked so grave that she did not dare to laugh
“And what are they made of?” Alice asked in a tone of great curiosity.
‘Well, I don’t want any to-day, at any rate.’
‘You couldn’t have it if you did want it,’ the Queen said. ‘The rule is, jam to-morrow and jam yesterday—but never jam to-day.’
‘It was much pleasanter at home,’ thought poor Alice, ‘when one wasn’t always growing larger and smaller... I almost wish I hadn’t gone down that rabbit-hole
[url=https://geekhack.org/index.php?topic=104449.0][img width=360 height=120]https://imgur.com/hFrJddY.png[/img][/url]
[url=https://geekhack.org/index.php?topic=104449.0][img width=360 height=120]https://imgur.com/bu5VEc2.png[/img][/url]
[url=https://geekhack.org/index.php?topic=104449.0][img width=360 height=120]https://imgur.com/q2d6OHd.png[/img][/url]
Item | Status | Expected |
MCUs, switches, capacitors, resistors, fuses | Received | |
USB-C connectors, Crystals | Received | |
USB Mini & Micro PCBs (final) | Received | |
USB C PCBs (revised prototype) | Received | |
USB C PCBs (final) | Received | |
Keycaps | Received | |
Switches | Received | |
White filament | Received | |
Hotswap sockets | Received | |
Hotswap sockets, replacement order | Received | |
Packing materials | Received | |
MCUs & components restock | Received | |
Filament restock white | Received | |
Filament restock black | Received |
Task | Completion |
PCBs assembled | 100% |
PCBs QC | 100% |
Parts printed | 100% |
Parts QC | 100% |
Units packed | 100% |
Units shipped | 96% |
New GB! Yay!
All invoices sent..... Wait..what?
New GB! Yay!
All invoices sent..... Wait..what?
New GB! Yay!
All invoices sent..... Wait..what?
Mods slackin on approvals
As mentioned in one of the other replies, there was quite a lot of interest. All spots were filled in a matter of hours. So I will definitely consider running a round two in the future. But that would definitely be after completely fulfilling this GB.
As mentioned in one of the other replies, there was quite a lot of interest. All spots were filled in a matter of hours. So I will definitely consider running a round two in the future. But that would definitely be after completely fulfilling this GB.
I wish i did not miss it but that is the right way of doing it, or if you do not want to do the 2nd run, could you release the models? so we can print it for ourselves
As mentioned in one of the other replies, there was quite a lot of interest. All spots were filled in a matter of hours. So I will definitely consider running a round two in the future. But that would definitely be after completely fulfilling this GB.
I wish i did not miss it but that is the right way of doing it, or if you do not want to do the 2nd run, could you release the models? so we can print it for ourselves
I kinda have to agree, unless you were following the IC you wouldn't know, but I mean at least it wasn't a trainwreck like the GSKT-00 groupbuy, apples to oranges comparison but hey.
As mentioned in one of the other replies, there was quite a lot of interest. All spots were filled in a matter of hours. So I will definitely consider running a round two in the future. But that would definitely be after completely fulfilling this GB.
I wish i did not miss it but that is the right way of doing it, or if you do not want to do the 2nd run, could you release the models? so we can print it for ourselves
I kinda have to agree, unless you were following the IC you wouldn't know, but I mean at least it wasn't a trainwreck like the GSKT-00 groupbuy, apples to oranges comparison but hey.
Wait what happened with that GB?
As mentioned in one of the other replies, there was quite a lot of interest. All spots were filled in a matter of hours. So I will definitely consider running a round two in the future. But that would definitely be after completely fulfilling this GB.
I wish i did not miss it but that is the right way of doing it, or if you do not want to do the 2nd run, could you release the models? so we can print it for ourselves
I kinda have to agree, unless you were following the IC you wouldn't know, but I mean at least it wasn't a trainwreck like the GSKT-00 groupbuy, apples to oranges comparison but hey.
Wait what happened with that GB?
Ok gb runner said that they'd only do the groupbuy through GH, all the people tryna get into the form crashed the whole of geekhack. Mate goes and then posts the groupbuy form on a discord server instead. When GH came back up the people who weren't apart of the discord server were fuming coz they didn't have a chance to get into the groupbuy as it was said that the runner would only do it through GH. Course the runner took an extra 100 more to try an negate it.
Show Image(https://i.imgur.com/bqyvfjl.jpg)
Weekly update:
- 100% of PCBs have been assembled and have passed quality control.
- 45% of printed parts have been produced.
- 6% of orders have been shipped.
Several orders have not been accepted for shipping because some countries are not currently accepting mail from Spain due to the pandemic. I will be monitoring the list of countries with viable shipping routes (https://www.correos.es/ss/Satellite/site/informacion_cliente-1363205084713-1363205018300/includeTemplate=COR_DetalleGuiasAyuda-sidioma=es_ES) to be able to mail out completed units as soon as possible.
The following countries are currently not accepting mail from Spain:
- Australia
- Cyprus
- Faroe Isles
- New Zealand
- Singapore
Please feel free to contact me with any questions.
Awesome! Out of curiosity, can I ask what printer you have / are using? I've been thinking about getting into printing.
QuoteAwesome! Out of curiosity, can I ask what printer you have / are using? I've been thinking about getting into printing.
I bought a Prusa i3 clone a couple of years ago and have been gradually and persistently replacing every part of it for higher quality components ever since. I love it, and I've learnt a lot from the experience, but it has not been the most efficient or economical route to getting a nice printer! My advice would be to simply get a Prusa MK3S; everyone I know that has one is extremely happy with it.
Whatever printer you buy, some tips:
- Learn how to level your build surface precisely
- Learn how to get really good first-layer adhesion (generally by printing a bit hotter and slower than the rest)
- Budget some time for regular printer maintenance
- Find some calibration models that you like
- Treat every new filament as uncharted territory and spend some time calibrating it when you first load it
- Consider planning to keep your printer in an enclosure. This helps a lot to avoid pieces warping, but it may require extra cooling for your electronics.
Finally received this little beauty, I was convinced it will never arrive.Show Image(https://uploads.tapatalk-cdn.com/20200910/474410b9de7ccf951b90744acbb8f569.jpg)
Sent from my iPhone using Tapatalk
Finally received this little beauty, I was convinced it will never arrive.Show Image(https://uploads.tapatalk-cdn.com/20200910/474410b9de7ccf951b90744acbb8f569.jpg)
Great to hear it arrived and absolutely love the choice of caps! They look like paw prints :)
I'm guessing you're from one of the countries that was not accepting mail from Spain for a while or one of the US states with significant backlogs.
So sorry for those in Australia which still isn't accepting mail from Spain. Hopefully there'll be a solution to that soon.
Sent from my iPhone using Tapatalk