geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: jebbra on Mon, 22 May 2017, 07:18:30

Title: [GB] NL–Bullet <<100% shipped, extras will be up Soon™>>
Post by: jebbra on Mon, 22 May 2017, 07:18:30: ORDER CLOSED

This is a Group Buy for Planck's aluminum high profile case: NL–Bullet

The interest check can be viewed here >> https://geekhack.org/index.php?topic=85663.0

[attachimg=1]

Specs
– High profile casing for 40% ortholinear board
– Material: Aluminum T6061
– Finish: Anodize
– Dimension: 238 x 86 x 20 mm
– Plate material: Stainless Steel / Brass
– Plate dimension: 228 x 76 mm
– 7x M2 Hexscrew
– 5x 8 x 2 mm Rubber feet
– 3x 16 x 8 mm Rubber feet
– Manufactured in Indonesia
Please note that this case is NOT COMPATIBLE WITH OLKB PLANCK PLATE

Price
$100
– Including aluminum case, SS brushed plate, rubber feet, and screws.
– Excluding PP fees and shipping.

Upgrades
– SS Black EDP plate +$7
– Brass plate +$15
– OLKB Planck PCB +$36

Anodize Color

[attachimg=2]

Gallery

[attachimg=3]

[attachimg=4]

[attachimg=5]

Timeline
– Groupbuy ends 5th June 2017
– Payment deadline 11th June 2017
– Production 10-14 weeks

Order changes
Do not PM me for changes, please send email to northlab.id[at]gmail[dot]com instead. This way I can keep the messages neater.

ORDER CLOSED
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Mon, 22 May 2017, 07:19:16: Payment and Shipping Status (https://docs.google.com/spreadsheets/d/18uxj23nJpSAeM8ZB4i_gTjHSZS-vs7-KYjv8-ypH_N0/edit?usp=sharing)
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Mon, 22 May 2017, 07:19:54: .reserved.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: theillumedpanda on Mon, 22 May 2017, 16:43:34: Approval bump! Good luck with the GB.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: teeseeuu on Mon, 22 May 2017, 17:14:53: I'm in! Went gold. Maybe should have done white. Great price for the buy and the PCB
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: futurecrime on Mon, 22 May 2017, 19:14:13: Man I wish I hadn't jumped on the Massdrop Planck GB... reckon I'll sell it when it arrives and get on the Anvil GB. How soon do you think that will start after Bullet ends?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: aznreaper on Mon, 22 May 2017, 19:14:35: Oh, good to see the buy going, great price. How does the white anoidizing work, didn't think it was really possible? Also, what is the black EDP plate?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Mon, 22 May 2017, 19:37:50: Quote from: theillumedpanda on Mon, 22 May 2017, 16:43:34
Approval bump! Good luck with the GB.

Thanks man!

Quote from: futurecrime on Mon, 22 May 2017, 19:14:13
Man I wish I hadn't jumped on the Massdrop Planck GB... reckon I'll sell it when it arrives and get on the Anvil GB. How soon do you think that will start after Bullet ends?

Anvil will be made to fit OLKB plate so you can sell just your casing from previous Planck's GB. Honestly I still don't know when exactly Anvil will start, but one thing for sure it is right after Bullet.

Quote from: teeseeuu on Mon, 22 May 2017, 17:14:53
I'm in! Went gold. Maybe should have done white. Great price for the buy and the PCB

Thanks mate, really appreciate your participation :thumb:
Quote from: aznreaper on Mon, 22 May 2017, 19:14:35
Oh, good to see the buy going, great price. How does the white anoidizing work, didn't think it was really possible? Also, what is the black EDP plate?

It's not white like the pic I post on OP (the one on OP is powder coated). I write it 'silver white' because it's less silver compared to the silver of MacBook. EDP is powder coat process, the texture is a bit grainy, it usually used on firearms/airsoft gun. I'll post pics of the plate today, just got them in.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: aznreaper on Mon, 22 May 2017, 21:06:23: Oh, just noticed that the first post says the PCB is 35, but the google form says 36
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: ns90 on Mon, 22 May 2017, 23:00:45: Oooooh. Now which color. Decisions, decisions.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: nao on Mon, 22 May 2017, 23:41:52: Joined the GB and waiting for Anvil.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: senter on Tue, 23 May 2017, 02:04:50: Gallery is good like white color Micro arc？？？
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Tue, 23 May 2017, 02:33:08: Quote from: aznreaper on Mon, 22 May 2017, 21:06:23
Oh, just noticed that the first post says the PCB is 35, but the google form says 36

Good catch, my bad, already corrected it. It is $36 ;D

Quote from: ns90 on Mon, 22 May 2017, 23:00:45
Oooooh. Now which color. Decisions, decisions.

If you don't have spesific keyset in mind, I said go for spacegray, it's the most versatile one :thumb:

Quote from: nao on Mon, 22 May 2017, 23:41:52
Joined the GB and waiting for Anvil.

Appreciate it mate, make sure you follow the newsletter!

Quote from: senter on Tue, 23 May 2017, 02:04:50
Gallery is good like white color Micro arc？？？

I'm sorry seems like I don't get what you wanna say. Using your own language is better since I can google translate it :)
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: r5d on Tue, 23 May 2017, 02:40:52: HYPE!!! ;D ;D ;D
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: garbo on Tue, 23 May 2017, 03:05:12: I actually liked the white powder coat on your prototype a lot and would go for that if it were available.
The lightest anodise sample seems pretty good in the picture but I feel I might find it too silvery/grey in person. Do you have the sample available to possibly take additional pictures in different lighting conditions or something?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: ShishKabobJerry on Tue, 23 May 2017, 06:02:51: Wow really pretty case! Goodluck with the GB!
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Tue, 23 May 2017, 06:20:08: Quote from: r5d on Tue, 23 May 2017, 02:40:52
HYPE!!! ;D ;D ;D

I'M HYPED TOO :p

Quote from: garbo on Tue, 23 May 2017, 03:05:12
I actually liked the white powder coat on your prototype a lot and would go for that if it were available.
The lightest anodise sample seems pretty good in the picture but I feel I might find it too silvery/grey in person. Do you have the sample available to possibly take additional pictures in different lighting conditions or something?

I'm thinking to add the powder coat option too since it had been researched so why not offer it? Will properly photograph the chips again tomorrow and update the form. And you're right, if white is what we seek, no anodize will come close to white powder coat!

Quote from: ShishKabobJerry on Tue, 23 May 2017, 06:02:51
Wow really pretty case! Goodluck with the GB!

Thank you! Appreciate your kind words :cool:
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: futurecrime on Tue, 23 May 2017, 06:30:03: Quote from: jebbra on Mon, 22 May 2017, 19:37:50

Quote from: futurecrime on Mon, 22 May 2017, 19:14:13
Man I wish I hadn't jumped on the Massdrop Planck GB... reckon I'll sell it when it arrives and get on the Anvil GB. How soon do you think that will start after Bullet ends?

Anvil will be made to fit OLKB plate so you can sell just your casing from previous Planck's GB. Honestly I still don't know when exactly Anvil will start, but one thing for sure it is right after Bullet.

Great stuff. Thanks for the info man. Good luck with this one, it's a stunner!
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: UsualSuspectXXX on Tue, 23 May 2017, 07:39:21: Quote from: jebbra on Tue, 23 May 2017, 02:33:08
Quote from: senter on Tue, 23 May 2017, 02:04:50
Gallery is good like white color Micro arc？？？

I'm sorry seems like I don't get what you wanna say. Using your own language is better since I can google translate it :)

I believe senter is asking if the white color is done with micro arc oxidation (also known as Plasma electrolytic oxidation (https://en.wikipedia.org/wiki/Plasma_electrolytic_oxidation)) which is a similar process to anodizing.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: oluigenuma on Tue, 23 May 2017, 11:21:59: GMK Dolch better on a black or space gray case?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: nao on Tue, 23 May 2017, 12:43:20: Quote from: oluigenuma on Tue, 23 May 2017, 11:21:59
GMK Dolch better on a black or space gray case?
Personally, I think space gray one is better.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Tue, 23 May 2017, 22:24:24: Quote from: UsualSuspectXXX on Tue, 23 May 2017, 07:39:21
Quote from: jebbra on Tue, 23 May 2017, 02:33:08
Quote from: senter on Tue, 23 May 2017, 02:04:50
Gallery is good like white color Micro arc？？？

I'm sorry seems like I don't get what you wanna say. Using your own language is better since I can google translate it :)

I believe senter is asking if the white color is done with micro arc oxidation (also known as Plasma electrolytic oxidation (https://en.wikipedia.org/wiki/Plasma_electrolytic_oxidation)) which is a similar process to anodizing.

Ah I see. The one on gallery is done with Powder Coat, not anodize. The only way to achieve real white on aluminum is through powder coat.

Quote from: nao on Tue, 23 May 2017, 12:43:20
Quote from: oluigenuma on Tue, 23 May 2017, 11:21:59
GMK Dolch better on a black or space gray case?
Personally, I think space gray one is better.

Yep space gray is better. For a rule of thumb, generally it always be better to match the case color with alpha color, instead of modifier color.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Tue, 23 May 2017, 22:39:55: Some update:

1. This is the plate options

[attachimg=1]

This is the Black EDP plate details
[attachimg=2]

2. I will include powder coat for finish choice, if you want it just hold on until tomorrow until I update the form. For you who already fill the form, you can contact me if want to change

Missing here is the red, will update tomorrow
[attachimg=3]

This is the texture, black and white are more matte, blue and green are orange-skin
[attachimg=4]
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: teeseeuu on Wed, 24 May 2017, 07:13:50: I'm going to email you a change to my order. That EDP is too good!
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: ChitownM2 on Wed, 24 May 2017, 07:14:19: When your say "upgrades" for the plate does that mean you will get that plate instead of the regular SS one? Or are they actually "extras" meaning you get both?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: oluigenuma on Wed, 24 May 2017, 08:00:57: It's just an upgrade, not an extra.

Any idea how much shipping to europe/germany will be?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: cr0n1c on Wed, 24 May 2017, 18:00:35: So is there just a universal plate that can handle both MIT and Grid layouts? I don't see a distinction in the form. If this has already been asked I apologize as I didn't see it.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: aznreaper on Wed, 24 May 2017, 23:32:24: Those plates look interesting, what layouts are those plates made for?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: Latin00032 on Thu, 25 May 2017, 08:21:55: When is the white painted option going to be added to the form?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Thu, 25 May 2017, 10:45:50: Quote from: ChitownM2 on Wed, 24 May 2017, 07:14:19
When your say "upgrades" for the plate does that mean you will get that plate instead of the regular SS one? Or are they actually "extras" meaning you get both?

The first, you are not going to get additional plate. But you can add more plates/PCB if you write it on the note :)

Quote from: teeseeuu on Wed, 24 May 2017, 07:13:50
I'm going to email you a change to my order. That EDP is too good!

Done!

Quote from: cr0n1c on Wed, 24 May 2017, 18:00:35
So is there just a universal plate that can handle both MIT and Grid layouts? I don't see a distinction in the form. If this has already been asked I apologize as I didn't see it.
Quote from: aznreaper on Wed, 24 May 2017, 23:32:24
Those plates look interesting, what layouts are those plates made for?

The plate we will get is univerasl one, I designed it myself to accomodate Grid, MIT (but it can only use Cherry PCB stab), and even 1.25u bottom row—yes OLKB PCB support 1.25–1.25–1.25–1.25–2–1.25–1.25–1.25–1.25 or 1.25–1.25–1.25–1.25–1–1–1.25–1.25–1.25–1.25 bottom row!

Sorry if the Black EDP make it looks like the plate have options, the Black EDP is OLKB plate which I use for EDP sample.

Quote from: Latin00032 on Thu, 25 May 2017, 08:21:55
When is the white painted option going to be added to the form?

I've updated it now, the photograph will added later after I get the red powder coat (I left it at my friend's house..)
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: elfick on Thu, 25 May 2017, 11:44:41: Is the plate cut for both MX and Alps switches? It looks like it is is but I couldn't find anything specifically mentioning it.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: yosi1sland on Thu, 25 May 2017, 20:20:52: When will my billing email be sent?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: jebbra on Thu, 25 May 2017, 22:32:44: Quote from: elfick on Thu, 25 May 2017, 11:44:41
Is the plate cut for both MX and Alps switches? It looks like it is is but I couldn't find anything specifically mentioning it.

Yes it support both MX and Alps variants! Sorry for not mentioned it before. Now I already updated this info, thx!

Quote from: yosi1sland on Thu, 25 May 2017, 20:20:52
When will my billing email be sent?

The quotation will be sent after the form closed, which is between 6th – 11th June :)
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: Kafka on Fri, 26 May 2017, 12:40:42: God I'm excited for the Anvil.

Sent from my iPhone using Tapatalk
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: roostrc0gburn on Fri, 26 May 2017, 14:38:08: i have been following this project for a while. very happy to see this project moving forward. has the purple option been removed? seems like it would be easy to get in powdercoat
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: Rolian on Fri, 26 May 2017, 15:12:25: Hi guys I want to buy this case to do my first assembled board and I have some questions. what do I need to finish the board? just the switches? If so is this Zealio compatible ?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: oluigenuma on Fri, 26 May 2017, 15:21:08: Quote from: Rolian on Fri, 26 May 2017, 15:12:25
Hi guys I want to buy this case to do my first assembled board and I have some questions. what do I need to finish the board? just the switches? If so is this Zealio compatible ?

You will need switches, keycaps and a cable. Yes the plate is Mx and Alps compatible, so it does support zealios which are a mx variant.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: Rolian on Fri, 26 May 2017, 15:28:03: Quote from: oluigenuma on Fri, 26 May 2017, 15:21:08
Quote from: Rolian on Fri, 26 May 2017, 15:12:25
Hi guys I want to buy this case to do my first assembled board and I have some questions. what do I need to finish the board? just the switches? If so is this Zealio compatible ?

You will need switches, keycaps and a cable. Yes the plate is Mx and Alps compatible, so it does support zealios which are a mx variant.

Allright thanks man
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: yosi1sland on Sat, 27 May 2017, 21:10:34: Can not you send me a payment message sooner?

I want to pay in advance due to circumstances.

I want to make the payment as soon as possible.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: jebbra on Sun, 28 May 2017, 04:27:40: Quote from: yosi1sland on Sat, 27 May 2017, 21:10:34
Can not you send me a payment message sooner?

I want to pay in advance due to circumstances.

I want to make the payment as soon as possible.

Sorry I just see your post, already email you regarding this :thumb:
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: yahei on Sun, 28 May 2017, 14:05:33: Quote from: jebbra on Tue, 23 May 2017, 22:39:55
2. I will include powder coat for finish choice, if you want it just hold on until tomorrow until I update the form. For you who already fill the form, you can contact me if want to change

Do you reply when accepting a case color change request?
I sent it from the left mail icon, but I have not received a reply.
Have my request been accepted?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: jebbra on Mon, 29 May 2017, 00:15:05: Quote from: yahei on Sun, 28 May 2017, 14:05:33
Quote from: jebbra on Tue, 23 May 2017, 22:39:55
2. I will include powder coat for finish choice, if you want it just hold on until tomorrow until I update the form. For you who already fill the form, you can contact me if want to change

Do you reply when accepting a case color change request?
I sent it from the left mail icon, but I have not received a reply.
Have my request been accepted?

Sorry seems like I miss your email. Your order now is Powder Coat White, SS Brushed plate, +PCB, is this right?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck.
Post by: yahei on Mon, 29 May 2017, 07:15:29: Quote from: jebbra on Mon, 29 May 2017, 00:15:05
Quote from: yahei on Sun, 28 May 2017, 14:05:33
Quote from: jebbra on Tue, 23 May 2017, 22:39:55
2. I will include powder coat for finish choice, if you want it just hold on until tomorrow until I update the form. For you who already fill the form, you can contact me if want to change

Do you reply when accepting a case color change request?
I sent it from the left mail icon, but I have not received a reply.
Have my request been accepted?

Sorry seems like I miss your email. Your order now is Powder Coat White, SS Brushed plate, +PCB, is this right?

Yes. Thank you very much.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: roostrc0gburn on Mon, 29 May 2017, 12:20:41: purple?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: Latin00032 on Mon, 29 May 2017, 12:22:20: Quote from: Rolian on Fri, 26 May 2017, 15:28:03
Quote from: oluigenuma on Fri, 26 May 2017, 15:21:08
Quote from: Rolian on Fri, 26 May 2017, 15:12:25
Hi guys I want to buy this case to do my first assembled board and I have some questions. what do I need to finish the board? just the switches? If so is this Zealio compatible ?

You will need switches, keycaps and a cable. Yes the plate is Mx and Alps compatible, so it does support zealios which are a mx variant.

Allright thanks man
Keep in mind, you may need a 2x cherry plate mount stab depending on the layout.

Which layout are you using?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: Tallypat on Tue, 30 May 2017, 12:51:34: Do you usually send an email in confirmation of a change in the order? Just wanna make sure I get that powder coat white version!
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: jebbra on Wed, 31 May 2017, 01:18:51: Quote from: Tallypat on Tue, 30 May 2017, 12:51:34
Do you usually send an email in confirmation of a change in the order? Just wanna make sure I get that powder coat white version!

Yes I inform via email when doing changes, maybe I skipped you, sorry. But your order already sit with Powder Coat White so all set and good!

Quote from: Latin00032 on Mon, 29 May 2017, 12:22:20
Quote from: Rolian on Fri, 26 May 2017, 15:28:03
Quote from: oluigenuma on Fri, 26 May 2017, 15:21:08
Quote from: Rolian on Fri, 26 May 2017, 15:12:25
Hi guys I want to buy this case to do my first assembled board and I have some questions. what do I need to finish the board? just the switches? If so is this Zealio compatible ?

You will need switches, keycaps and a cable. Yes the plate is Mx and Alps compatible, so it does support zealios which are a mx variant.

Allright thanks man
Keep in mind, you may need a 2x cherry plate mount stab depending on the layout.

Which layout are you using?

I want to confirm that the plate only accept Cherry PCB-mount one. Sorry I forgot to to highlight this detail!
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: Rolian on Wed, 31 May 2017, 09:22:52: Is the stabilizer really needed I mean I read that many people don't use it with the 2u spacebar- Am I right?
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: climbalima on Wed, 31 May 2017, 10:28:33: Quote from: Rolian on Wed, 31 May 2017, 09:22:52
Is the stabilizer really needed I mean I read that many people don't use it with the 2u spacebar- Am I right?
I never use stabs on planck builds

Sent from my SM-G920V using Tapatalk
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: Latin00032 on Wed, 31 May 2017, 10:33:07: Quote from: climbalima on Wed, 31 May 2017, 10:28:33
Quote from: Rolian on Wed, 31 May 2017, 09:22:52
Is the stabilizer really needed I mean I read that many people don't use it with the 2u spacebar- Am I right?
I never use stabs on planck builds

Sent from my SM-G920V using Tapatalk
I didnt have it on my ergodox and it bothered me. You can get away without using it though.
Title: Re: [GB] NL–Bullet Case -- Aluminum High Profile Casing for Planck <<TAKING ORDER>>
Post by: jebbra on Mon, 05 June 2017, 03:06:59: Quote from: Latin00032 on Wed, 31 May 2017, 10:33:07
Quote from: climbalima on Wed, 31 May 2017, 10:28:33
Quote from: Rolian on Wed, 31 May 2017, 09:22:52
Is the stabilizer really needed I mean I read that many people don't use it with the 2u spacebar- Am I right?
I never use stabs on planck builds

Sent from my SM-G920V using Tapatalk
I didnt have it on my ergodox and it bothered me. You can get away without using it though.

I tried both of them, with and without, and for me with stab is more convenient!
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: roostrc0gburn on Mon, 05 June 2017, 05:58:06: Ordered!
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: yonghf on Tue, 06 June 2017, 00:59:55: When will invoices be sent out?
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: jebbra on Tue, 06 June 2017, 05:15:28: Quote from: yonghf on Tue, 06 June 2017, 00:59:55
When will invoices be sent out?

Just got back from office. I finished making the invoice yesterday, just need to push send them all :D
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: teeseeuu on Tue, 06 June 2017, 05:45:13: Paid in full! Cannot wait. Please post some production photos if you get the chance!
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: jebbra on Tue, 06 June 2017, 06:30:16: All invoice sent! :thumb:

Quote from: teeseeuu on Tue, 06 June 2017, 05:45:13
Paid in full! Cannot wait. Please post some production photos if you get the chance!

I'll try to post it here, but for sure I will update it on the instagram >> https://www.instagram.com/north.lab/
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: nao on Tue, 06 June 2017, 06:41:46: Thank you. I paid now.
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: yonghf on Tue, 06 June 2017, 11:46:22: Quote from: jebbra on Tue, 06 June 2017, 05:15:28
Quote from: yonghf on Tue, 06 June 2017, 00:59:55
When will invoices be sent out?

Just got back from office. I finished making the invoice yesterday, just need to push send them all :D

Thanks! I've paid as well - real excited for this!
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: KetchyKech on Tue, 06 June 2017, 13:42:53: I've resisted ordering because I'm very interested in the second design! :thumb:

v excited ;)
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: jebbra on Tue, 06 June 2017, 20:56:52: Quote from: yonghf on Tue, 06 June 2017, 11:46:22
Quote from: jebbra on Tue, 06 June 2017, 05:15:28
Quote from: yonghf on Tue, 06 June 2017, 00:59:55
When will invoices be sent out?

Just got back from office. I finished making the invoice yesterday, just need to push send them all :D

Thanks! I've paid as well - real excited for this!

Thanks! I am as excited as you because I will see my design come to life, and the best part is I can share with you guys! ;D

Quote from: KetchyKech on Tue, 06 June 2017, 13:42:53
I've resisted ordering because I'm very interested in the second design! :thumb:

v excited ;)

No worries, will let you know if Anvil is ready!
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<LAST DAY TO ENTER>>
Post by: jebbra on Tue, 06 June 2017, 21:04:07: The update on payment and tracking number (which is still far ahead) can be viewed HERE (https://docs.google.com/spreadsheets/d/18uxj23nJpSAeM8ZB4i_gTjHSZS-vs7-KYjv8-ypH_N0/edit?usp=sharing)

Updated the link on the OP page too :cool:
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<INVOICE SENT>>
Post by: nao on Thu, 08 June 2017, 20:55:38: Are andize / powder coat color modified when Anvill happend?
I'm wondering which one to choose.
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<INVOICE SENT>>
Post by: senter on Thu, 08 June 2017, 21:23:03: smart
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<INVOICE SENT>>
Post by: jebbra on Sat, 10 June 2017, 03:05:07: Quote from: nao on Thu, 08 June 2017, 20:55:38
Are andize / powder coat color modified when Anvill happend?
I'm wondering which one to choose.

Modified as in? Do you mean the current finish option remain available on Anvil GB?

Quote from: senter on Thu, 08 June 2017, 21:23:03
smart

Thx!
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<INVOICE SENT>>
Post by: nao on Sat, 10 June 2017, 12:05:29: Quote from: jebbra on Sat, 10 June 2017, 03:05:07
Quote from: nao on Thu, 08 June 2017, 20:55:38
Are andize / powder coat color modified when Anvill happend?
I'm wondering which one to choose.

Modified as in? Do you mean the current finish option remain available on Anvil GB?

I apologize for any confusion.
For example, Add gray power coat to the finish option.
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<INVOICE SENT>>
Post by: jebbra on Sun, 11 June 2017, 10:16:55: Quote from: nao on Sat, 10 June 2017, 12:05:29
Quote from: jebbra on Sat, 10 June 2017, 03:05:07
Quote from: nao on Thu, 08 June 2017, 20:55:38
Are andize / powder coat color modified when Anvill happend?
I'm wondering which one to choose.

Modified as in? Do you mean the current finish option remain available on Anvil GB?

I apologize for any confusion.
For example, Add gray power coat to the finish option.

I can't say anything regarding powder coat as my current powder coat vendor have a very limited amount of color. And any order on new color must be on a galon so they only restock a popular color (white and black). However, I really want to add gray matte and ivory/beige color in powder coat. Anvil case on beige is really a killer!

Lest's cross our finger :-X
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<INVOICE SENT>>
Post by: nao on Sun, 11 June 2017, 18:46:47: Quote from: jebbra on Sun, 11 June 2017, 10:16:55
Quote from: nao on Sat, 10 June 2017, 12:05:29
Quote from: jebbra on Sat, 10 June 2017, 03:05:07
Quote from: nao on Thu, 08 June 2017, 20:55:38
Are andize / powder coat color modified when Anvill happend?
I'm wondering which one to choose.

Modified as in? Do you mean the current finish option remain available on Anvil GB?

I apologize for any confusion.
For example, Add gray power coat to the finish option.

I can't say anything regarding powder coat as my current powder coat vendor have a very limited amount of color. And any order on new color must be on a galon so they only restock a popular color (white and black). However, I really want to add gray matte and ivory/beige color in powder coat. Anvil case on beige is really a killer!

Lest's cross our finger :-X

Beige! :thumb:
Title: Re: [GB] NL–Bullet — Aluminum High Profile Case for Planck <<INVOICE SENT>>
Post by: futurecrime on Tue, 20 June 2017, 08:51:35: Quote from: nao on Sun, 11 June 2017, 18:46:47
Quote from: jebbra on Sun, 11 June 2017, 10:16:55
Quote from: nao on Sat, 10 June 2017, 12:05:29
Quote from: jebbra on Sat, 10 June 2017, 03:05:07
Quote from: nao on Thu, 08 June 2017, 20:55:38
Are andize / powder coat color modified when Anvill happend?
I'm wondering which one to choose.

Modified as in? Do you mean the current finish option remain available on Anvil GB?

I apologize for any confusion.
For example, Add gray power coat to the finish option.

I can't say anything regarding powder coat as my current powder coat vendor have a very limited amount of color. And any order on new color must be on a galon so they only restock a popular color (white and black). However, I really want to add gray matte and ivory/beige color in powder coat. Anvil case on beige is really a killer!

Lest's cross our finger :-X

Beige! :thumb:

Yep. Beige anvil. Yes yes yes.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: forevermadrigal on Thu, 22 June 2017, 06:40:28: Ivory sounds amazing, hopefully that goes through! :p
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Locnguyen1507 on Mon, 26 June 2017, 02:55:31: How everything going guys???? Im so eager to hands on this little tiny mech :3
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Mon, 26 June 2017, 20:12:04: Pardon me for the long silence. This is my first GB so after the payment ended I quickly jump on to the vendors, procuring materials, and etc etc and stupidly forget to put the infos here lol.

So now the CNC order is placed and the Aluminum was cut to blocks, materials for plate was bought, PCB ordered and rubber feet was already stocked!

However, the CNC paused from a week ago until a week later now due to Eid Mubarak (yes Eid Mubarak in Indonesia is the longest holiday here because more than 90% is Islam, and most of them are homecoming).

So I wil inform again when the CNC began! Hopefully with some photos and videos ;)

Happy Ied Mubarak for whoever celebrates it!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Mon, 26 June 2017, 23:35:44: Quote from: jebbra on Mon, 26 June 2017, 20:12:04
Pardon me for the long silence. This is my first GB so after the payment ended I quickly jump on to the vendors, procuring materials, and etc etc and stupidly forget to put the infos here lol.

So now the CNC order is placed and the Aluminum was cut to blocks, materials for plate was bought, PCB ordered and rubber feet was already stocked!

However, the CNC paused from a week ago until a week later now due to Eid Mubarak (yes Eid Mubarak in Indonesia is the longest holiday here because more than 90% is Islam, and most of them are homecoming).

So I wil inform again when the CNC began! Hopefully with some photos and videos ;)

Happy Ied Mubarak for whoever celebrates it!

Thank you for update!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Tue, 27 June 2017, 01:39:03: Also, the pause I mentioned is already calculated on my schedule so nothing different from our current timeline :thumb:

You and all of the participants are deserved it Nao, pardon me for being silent.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Sat, 01 July 2017, 07:39:38: The very first piece is cutted!

Super potato pic from my vendor :))

[attachimg=1]

[attachimg=2]
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: stoic-lemon on Sat, 01 July 2017, 10:36:38: Must be a cool moment. Congrats.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Mon, 10 July 2017, 04:59:55: Again, super potato from my vendor :eek:

I'm sorry I have a quite packed schedule out of the town until the end of the month so maybe the update will mostly potato. I have my partner doing our weekly QC to the workshop tho so no worries.

[attachimg=1]

Have a productive week mates!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: RealLaugh on Mon, 10 July 2017, 08:15:36: Excellent thanks for the update. Can't wait to see them anodized :p

Quote from: jebbra on Mon, 10 July 2017, 04:59:55
Again, super potato from my vendor :eek:

I'm sorry I have a quite packed schedule out of the town until the end of the month so maybe the update will mostly potato. I have my partner doing our weekly QC to the workshop tho so no worries.

(Attachment Link)

Have a productive week mates!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: forevermadrigal on Tue, 11 July 2017, 22:59:26: Quote from: jebbra on Mon, 10 July 2017, 04:59:55
Again, super potato from my vendor :eek:

I'm sorry I have a quite packed schedule out of the town until the end of the month so maybe the update will mostly potato. I have my partner doing our weekly QC to the workshop tho so no worries.

(Attachment Link)

Have a productive week mates!

It's looking good! Can't wait for the anvil case.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: achilles_other_heel on Sat, 15 July 2017, 00:10:06: Me too! Such a great design. Dare I say it, better than the M0110A itself? Hard to say haha
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Thu, 27 July 2017, 20:58:26: All CNC is done and I made a custom crate to transport it in hope to minimalize unintentional harm.

[attachimg=1]

[attachimg=2]
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: RealLaugh on Fri, 28 July 2017, 01:31:05: Awesome! Thanks for the update. They are going to be anodized now?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Locnguyen1507 on Thu, 24 August 2017, 02:15:12: Hi jbra, it's been a while from ur last update. I am waiting to see the anodizing from ur work :3
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Sat, 26 August 2017, 19:04:02: Still wet, some color need to be checked ;D

[attachimg=1]
[attachimg=2]

I hate to say this but we are more likely moving the completion date to Sept. :'(
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Movis on Sun, 27 August 2017, 04:25:26: Do you think it'll be early, mid or late September?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: wingsnsky on Sun, 27 August 2017, 07:58:16: Is there any change on the case design?
The indents for the rubber feet seems different from the prototype.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Mon, 28 August 2017, 07:57:39: Quote from: Movis on Sun, 27 August 2017, 04:25:26
Do you think it'll be early, mid or late September?

Just take it as late Sept since it's better to underpromise than over. Nobody wants delay like this, including me :(

Quote from: wingsnsky on Sun, 27 August 2017, 07:58:16
Is there any change on the case design?
The indents for the rubber feet seems different from the prototype.

Ah the indents is tweaked a bit so the bigger rubber feet (to make it inclined) can have a better hold.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Tue, 29 August 2017, 19:37:52: Gorgeous!
Even if the completion date is changes, I will be relaxed by update.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Sat, 02 September 2017, 05:04:46: Pardon me for the pause on the update, I just get back from shooting in remote areas :-X

The timeline is moved to the end of September, at the fastest. I'm really sorry about this, this is due to some of the anodizing process is become sub-standard and I like to make some correction on that.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Sat, 02 September 2017, 05:08:11: Quote from: nao on Tue, 29 August 2017, 19:37:52
Gorgeous!
Even if the completion date is changes, I will be relaxed by update.

Really appreciate the understanding man ;D
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Fri, 22 September 2017, 02:01:59: Any photos of the finished case in white?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: teeseeuu on Sun, 01 October 2017, 07:45:21: So, it's October. No updates for over a month, can we get a check in?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: rlawlgh12039 on Sun, 01 October 2017, 13:00:02: I'm curious as well.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Enoch on Sun, 01 October 2017, 21:24:28: Status update is appreciated, even if there is nothing new! :)
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Thu, 05 October 2017, 03:11:14: Can we get an update please? What happened to the sub-standard units?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Sun, 08 October 2017, 23:08:00: Sorry for the absence.

Here's the current things that running here:
1. The anodize is tried again in another anodizing vendor (the 3rd one)
2. In before, I still hold the cases for powder coat as a spare for the anodize ones because bad anodize still can be purged and used for powder coat with no drawbacks at all. But now I think this is too long so I run the powder coat last weekend.

So:
1. Most likely the powder coat will ship sooner than the anodize
2. If anybody wanna change his/her case to powder coat because the long wait on anodize, hit me up!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Mon, 09 October 2017, 01:06:41: Quote from: jebbra on Sun, 08 October 2017, 23:08:00
Sorry for the absence.

Here's the current things that running here:
1. The anodize is tried again in another anodizing vendor (the 3rd one)
2. In before, I still hold the cases for powder coat as a spare for the anodize ones because bad anodize still can be purged and used for powder coat with no drawbacks at all. But now I think this is too long so I run the powder coat last weekend.

So:
1. Most likely the powder coat will ship sooner than the anodize
2. If anybody wanna change his/her case to powder coat because the long wait on anodize, hit me up!

I send you an email. :)
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Movis on Mon, 09 October 2017, 02:07:28: Quote from: jebbra on Sun, 08 October 2017, 23:08:00
Sorry for the absence.

Here's the current things that running here:
1. The anodize is tried again in another anodizing vendor (the 3rd one)
2. In before, I still hold the cases for powder coat as a spare for the anodize ones because bad anodize still can be purged and used for powder coat with no drawbacks at all. But now I think this is too long so I run the powder coat last weekend.

So:
1. Most likely the powder coat will ship sooner than the anodize
2. If anybody wanna change his/her case to powder coat because the long wait on anodize, hit me up!

How much more of a delay should we expect for the anodized ones? And how long would it take for the powder coats instead?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Mon, 09 October 2017, 11:49:57: Quote from: nao on Mon, 09 October 2017, 01:06:41
Quote from: jebbra on Sun, 08 October 2017, 23:08:00
Sorry for the absence.

Here's the current things that running here:
1. The anodize is tried again in another anodizing vendor (the 3rd one)
2. In before, I still hold the cases for powder coat as a spare for the anodize ones because bad anodize still can be purged and used for powder coat with no drawbacks at all. But now I think this is too long so I run the powder coat last weekend.

So:
1. Most likely the powder coat will ship sooner than the anodize
2. If anybody wanna change his/her case to powder coat because the long wait on anodize, hit me up!

I send you an email. :)

Replied and recorded. Thx!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Mon, 09 October 2017, 11:53:20: Quote from: Movis on Mon, 09 October 2017, 02:07:28
Quote from: jebbra on Sun, 08 October 2017, 23:08:00
Sorry for the absence.

Here's the current things that running here:
1. The anodize is tried again in another anodizing vendor (the 3rd one)
2. In before, I still hold the cases for powder coat as a spare for the anodize ones because bad anodize still can be purged and used for powder coat with no drawbacks at all. But now I think this is too long so I run the powder coat last weekend.

So:
1. Most likely the powder coat will ship sooner than the anodize
2. If anybody wanna change his/her case to powder coat because the long wait on anodize, hit me up!

How much more of a delay should we expect for the anodized ones? And how long would it take for the powder coats instead?

For anodize, another next month is what lies in my head for now :(
Powder Coats will be sent out at as fast as 22 this month.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: gizmoplex on Tue, 10 October 2017, 06:13:19: Hi Jebbra, sent you an email.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Thu, 19 October 2017, 23:55:30: A little update:

Powder Coat white is done, waiting for the rest of the color
[attachimg=1]

And the packaging is almost done too, the only one that being cut is the foam, everything else is already cut
[attachimg=2]
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Enoch on Fri, 20 October 2017, 16:01:31: The white powder coating looks really nice! :D
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Fri, 27 October 2017, 01:16:32: Given that the white powder coated ones are done - will you be shipping them out first?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Fri, 27 October 2017, 14:29:41: Quote from: yonghf on Fri, 27 October 2017, 01:16:32
Given that the white powder coated ones are done - will you be shipping them out first?

Yes the powder coat will be shipped first. I'm waiting them shipped to me now.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Locnguyen1507 on Fri, 03 November 2017, 01:45:00: Ill keep my side for anodized case and waiting patiently for your update bro :3
:thumb: :thumb: :thumb: :thumb:
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: RealLaugh on Mon, 13 November 2017, 10:27:21: hey everyone

can we get an update please?

do you know when these might ship?

thanks in advance
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Fri, 17 November 2017, 03:04:51: I hope the powder coat one is shipped soon.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: teeseeuu on Tue, 21 November 2017, 17:12:42: Nearly another month since OP's last post....
Maybe we could get an update?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Wed, 22 November 2017, 20:59:50: What's going on OP? It shouldn't take 1 month for the white powder-coated case to reach you.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: teeseeuu on Tue, 28 November 2017, 11:36:08: Any updates?!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Gavus on Wed, 29 November 2017, 09:31:46: It's weird how Jebbra is online everyday but can't give us an update. I would appreciate any update, bad or nothing new even.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: teeseeuu on Wed, 29 November 2017, 17:29:14: Quote from: Gavus on Wed, 29 November 2017, 09:31:46
It's weird how Jebbra is online everyday but can't give us an update. I would appreciate any update, bad or nothing new even.

Yeah, doesn't fill me with confidence. I think the 180 day window is still open. I'll cancel in a few days if we don't hear back.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Wed, 29 November 2017, 18:52:10: I send jebbra a PM of update request.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: stevits on Thu, 30 November 2017, 23:21:26: I hate to be a downer, but I opened a dispute with PayPal just in case.

Sent from my iPhone using Tapatalk
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Fri, 01 December 2017, 00:39:00: Quote from: stevits on Thu, 30 November 2017, 23:21:26
I hate to be a downer, but I opened a dispute with PayPal just in case.

Sent from my iPhone using Tapatalk

I did that too - I just wanted to be on the safe side. I think OP has ample time to respond and close off the case.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Fri, 01 December 2017, 01:16:23: I remenbered that jebbra could not confirm PM, so I sent email.
I will try and wait for a while.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Gavus on Fri, 01 December 2017, 05:46:11: Quote from: yonghf on Fri, 01 December 2017, 00:39:00
Quote from: stevits on Thu, 30 November 2017, 23:21:26
I hate to be a downer, but I opened a dispute with PayPal just in case.

Sent from my iPhone using Tapatalk

I did that too - I just wanted to be on the safe side. I think OP has ample time to respond and close off the case.

I have done that too now. Now its up to OP.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: teeseeuu on Fri, 01 December 2017, 14:07:54: Quote from: Gavus on Fri, 01 December 2017, 05:46:11
Quote from: yonghf on Fri, 01 December 2017, 00:39:00
Quote from: stevits on Thu, 30 November 2017, 23:21:26
I hate to be a downer, but I opened a dispute with PayPal just in case.

Sent from my iPhone using Tapatalk

I did that too - I just wanted to be on the safe side. I think OP has ample time to respond and close off the case.

I have done that too now. Now its up to OP.

Did the same. Two days to the deadline for dispute
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: pootsounds on Fri, 01 December 2017, 14:28:51: Did you guys go ahead and escalate the case to paypal or just create the case and message him?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: xondat on Fri, 01 December 2017, 15:10:27: Quote from: pootsounds on Fri, 01 December 2017, 14:28:51
Did you guys go ahead and escalate the case to paypal or just create the case and message him?

Sending a message keeps it going; if it isn't solved but you're outside of the 180 days then you still have protection - they either have to ship or refund.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Fri, 01 December 2017, 17:43:22: Guys I’m sorry for giving no updates at all after the white powder coat finished. I almost send them all to you because this has been too much delay but I believe that I must personally checked them myself. It turns out after I open the plastic most of them are having a hook mark. I already sent them back to revise it and will get notification on next Tuesday. If you wonder why it is take so long, it is because my order is very small compared to their usual order so it always worked along with other good of the same color.

About the anodize, the new vendor is doing better than before. I’ll check them out on Tuesday too (going on factory tour).

The powder coats that are good will be sent today as I just finished packing them yesterday.

[attachimg=1]

Okay regarding the updates and all the delay, I know most of you (and the culture here) is giving updates periodically, good or bad, image or text, anything as long as there is one. But because in this case the troubles are keep coming one after another I feel hesitated to inform the update (the updates will be bad news and bad news and bad news), so I tried to solve it myself first then giving the updates when I see some “lights”. Trust me, I have no ill-intentions to scam or anything, it just that this frustate me that the troubles are keep coming :-X and I fear the ‘bad news update’ will turn people into chaos and frustate me more.

All that said, I will update again on Tuesday night my time, good or bad.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: teeseeuu on Fri, 01 December 2017, 18:44:05: Thanks for the update. Over a month of silence is worrisome when the 180 day window is about to close. I will withdraw my claim.

Thanks again!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Sat, 02 December 2017, 03:43:00: All of the nice White PoCo is shipped. I put the tracking info the PayPal and also emailed it.

I notice some of you messaging me on PayPal, I already replied them and please bear with me. I will be more dilligent in posting updates :-[
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Sat, 02 December 2017, 05:20:10: Quote from: jebbra on Sat, 02 December 2017, 03:43:00
All of the nice White PoCo is shipped. I put the tracking info the PayPal and also emailed it.

I notice some of you messaging me on PayPal, I already replied them and please bear with me. I will be more dilligent in posting updates :-[

What about Invoice #01030? I did not receive any tracking number. You did not respond to my Paypal enquiry as well.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Jolly_Green_Giant on Sat, 02 December 2017, 14:14:02: Got notification with my tracking! I can't wait ;D
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Tue, 05 December 2017, 21:04:55: Sorry to post on Wed (maybe still Tue on US).

1. Anodize workshop canceled the meeting when I already halfway going there. Will meet on Thursday.
2. The powder coat place has some errors on their grounding, resulting in uneven paint. They will redo this and will show me on Thursday. Here's the pic of the uneven:

[attachimg=1]

[attachimg=2]

[attachimg=3]

All that said, I will update again on Thursday.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: stoic-lemon on Wed, 06 December 2017, 20:22:47: I'm still rooting for this project jebbra, although I didn't order this time. Good luck!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Thu, 07 December 2017, 22:49:22: Okay so here's a crucial info about the anodized case:

It's been the 3rd time I redo the anodize process and it still not in acceptable range of my vision of this case. At this point, I will just dump this batch and make them again from zero. I will search for another material vendor since I believe I got a bad batch of material, you have not too worry tho since I already find one which is more trusted in my opinion.

All that said, all of the redoing the whole CNC up to anodize will take about 30 working days according to the new vendor. At this point, I really hope you can understand this and not filing a dispute since I will redo this out of my own pocket. I'm sorry about all of this, I just don't want you to receive a bad product at the end.

Now the good part: the powder coat is going nicely! the vendor is able to redo it in a good way and some of them is already on my hand so another shipping will be done this weekend. I hope I can ship all of the powder coated case in next weekend.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Thu, 07 December 2017, 22:51:00: Quote from: stoic-lemon on Wed, 06 December 2017, 20:22:47
I'm still rooting for this project jebbra, although I didn't order this time. Good luck!

Thanks bud! Really appreciate your words :thumb:
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: That-Canadian on Fri, 08 December 2017, 12:08:44: So I never post here, but I wanted to say thank you for all the updates, even if they aren't all good news. I am already in for the Red Anodized case, and I want to say I don't mind the extra time, and I appreciate your transparency and your quality control. I'm sure once it comes in it will look phenomenal and I can't wait!

Thanks again, and I'm looking forward to future updates. :thumb:
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: JDT79 on Fri, 08 December 2017, 12:17:16: I agree. Thanks for all of the hard work and the phenomenal effort. I would rather wait a little longer for the keyboard you actually wanted to make, than the one you settled on. If anyone pulls out of there order lemme know I might be able to pick up another case if you need a buyer? Especially if it's a white powder coat!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Wed, 13 December 2017, 06:06:44: Quote from: That-Canadian on Fri, 08 December 2017, 12:08:44
So I never post here, but I wanted to say thank you for all the updates, even if they aren't all good news. I am already in for the Red Anodized case, and I want to say I don't mind the extra time, and I appreciate your transparency and your quality control. I'm sure once it comes in it will look phenomenal and I can't wait!

Thanks again, and I'm looking forward to future updates. :thumb:

Quote from: JDT79 on Fri, 08 December 2017, 12:17:16
I agree. Thanks for all of the hard work and the phenomenal effort. I would rather wait a little longer for the keyboard you actually wanted to make, than the one you settled on. If anyone pulls out of there order lemme know I might be able to pick up another case if you need a buyer? Especially if it's a white powder coat!

Thank you for your kind words, it really help me, no joke :)

Btw, I already paid the downpayment for new batch yesterday. So the new production is starting. Godspeed!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: teeseeuu on Wed, 13 December 2017, 21:15:31: Very nice! Thanks for keeping us in the loop.
Got my tracking the other day, much excitement!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Sat, 16 December 2017, 11:08:19: Just finished my build!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: Jolly_Green_Giant on Sat, 16 December 2017, 12:22:52: Quote from: nao on Sat, 16 December 2017, 11:08:19
Just finished my build!

Oh ****, we need more picks.... NAO :cool:
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: stoic-lemon on Sat, 16 December 2017, 21:53:18: Yeah, we can do better than that, right?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Sat, 16 December 2017, 23:19:48: Quote from: nao on Sat, 16 December 2017, 11:08:19
Just finished my build!

Gosh, can you take a photo of the underside?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: nao on Sun, 17 December 2017, 00:31:16: I took some pictures.
Enjoy!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: That-Canadian on Wed, 20 December 2017, 20:45:52: Oh that's pretty. Now I'm even more excited for mine!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Mon, 25 December 2017, 01:26:32: Sorry for the late update, year-end office live isn't fun at all :(

Bad news: white powder coat paint is depleted, the restocking take some time thus delaying the rest of the powder coat.

Good news: anodized one are doing good! the new vendor said the CNC is done and some of them is anodized. from the photo they sent this looks so much better than previous vendor!

[attachimg=1]

[attachimg=2]
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jazzjarred on Mon, 25 December 2017, 01:31:49: That anodizing looks very nice! What colour is this, space gray?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Mon, 25 December 2017, 23:23:15: Quote from: jazzjarred on Mon, 25 December 2017, 01:31:49
That anodizing looks very nice! What colour is this, space gray?

Yes, it is the space gray one.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Tue, 26 December 2017, 22:22:13: Quote from: jebbra on Mon, 25 December 2017, 01:26:32
Bad news: white powder coat paint is depleted, the restocking take some time thus delaying the rest of the powder coat.

So what's the new ETA for white powder coated case?
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Sun, 07 January 2018, 23:14:38: Happy New Year y'all!

Here the updates:

Powder Coat: paint bought and some of them already done. I'm confident I can ship 90% of them by this weekend :)

[attachimg=1]

Anodize: everything went smoothly! here are some other colors that finished:

[attachimg=2]

[attachimg=3]

[attachimg=4]

The finished colors are: space gray, blak, red, and pink. Remaining colors are: silver, gold, light gold, blue. Hopefully they can be finished next week!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: That-Canadian on Tue, 09 January 2018, 17:08:49: Woah those look awesome! I can't wait to get my red one ;D super excited. It's going to be paired with the brass plate and SA Jukebox, I think it'll look sick.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: That-Canadian on Thu, 18 January 2018, 07:37:21: Hey there! Just wondering if there is any update on shipping and such? Will you be able to ship the case/plates that are finished already? Not trying to bother, just very excited!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: garbo on Thu, 18 January 2018, 11:30:15: Have people been getting shipping notifications? I have a white powder coat order and haven’t heard anything, but perhaps there are still a few left to be sent out.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: yonghf on Thu, 18 January 2018, 20:50:37: Quote from: garbo on Thu, 18 January 2018, 11:30:15
Have people been getting shipping notifications? I have a white powder coat order and haven’t heard anything, but perhaps there are still a few left to be sent out.

I got notified on 13 Jan. Seems like it's in transit now..
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Wed, 24 January 2018, 22:28:02: Sorry for the lack of update, I got included in a sudden pitching and worked overtime every day even on the past weekend so.... there are 7 white PoCo left unshipped now, I'm sorry :-[ but they will be shippe this weekend :thumb:

Anodized ones will be in my studio next week!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: RealLaugh on Thu, 25 January 2018, 00:23:49: Quote from: jebbra on Wed, 24 January 2018, 22:28:02
Sorry for the lack of update, I got included in a sudden pitching and worked overtime every day even on the past weekend so.... there are 7 white PoCo left unshipped now, I'm sorry :-[ but they will be shippe this weekend :thumb:

Anodized ones will be in my studio next week!

Hey thanks for the update - do you know if all the anodized cases are finished and you're waiting to receive them? Would be great to get a detailed idea on the progress of the anodized cases.

many thanks in advance
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Thu, 25 January 2018, 05:55:44: Quote from: RealLaugh on Thu, 25 January 2018, 00:23:49
Quote from: jebbra on Wed, 24 January 2018, 22:28:02
Sorry for the lack of update, I got included in a sudden pitching and worked overtime every day even on the past weekend so.... there are 7 white PoCo left unshipped now, I'm sorry :-[ but they will be shippe this weekend :thumb:

Anodized ones will be in my studio next week!

Hey thanks for the update - do you know if all the anodized cases are finished and you're waiting to receive them? Would be great to get a detailed idea on the progress of the anodized cases.

many thanks in advance

Yes they're all finished and shipped to me, I'm waiting for them to arrived.
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: That-Canadian on Thu, 25 January 2018, 17:13:34: Great to hear from you again! Excited to hear everything is reaching it's conclusion, can't wait to finish my build!
Title: Re: [GB] NL–Bullet <<GB CLOSED; ORDER SUBMITTED TO VENDOR>>
Post by: jebbra on Tue, 06 February 2018, 00:13:34: Update Powder Coat:
Almost all of them is shipped, the only one isn't is the lime green one. Some last tracking number will be updated tonight :thumb:

Update Anodize:
I have received them all and finally they meet my standard! I already begin packing them all with the overseas packaging. They will be rolling out starting this week ;D

[attachimg=1]
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: Jolly_Green_Giant on Tue, 06 February 2018, 00:17:32: Wooooo! I'm glad everyone will finally be able to enjoy their Bullets too! Good job on the GB, there was a hiccup here and there but I can say I was satisfied with this GB. The more consistent updates near the end really were nice.
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: stoic-lemon on Tue, 06 February 2018, 01:04:51: So there's a bullet with your name on it guys. Glad this is moving along. Excited to see what you do with them.
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: stevits on Thu, 08 February 2018, 13:59:16: I have not received a shipping notification or tracking number - powder case.
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: Spaghetti on Thu, 08 February 2018, 15:31:32: Super stoked for the lime green one!
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: JDT79 on Sun, 11 February 2018, 21:44:40: I also have not received a shipping/tracking number yet?
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: JDT79 on Sun, 11 February 2018, 21:50:04: Disregard I just now saw that you mentioned that for the powder coats. Mine was aluminum.
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: jebbra on Sun, 18 February 2018, 06:54:59: All of the remaining order are packed and will be shipped tomorrow! I will update the tracking number via email :thumb:

[attachimg=1]

Thank you all for staying with me until this point :-[
Title: Re: [GB] NL–Bullet <<GB CLOSED; PoCo 99% shipped, Ano shippin starting this week>>
Post by: jebbra on Sun, 18 February 2018, 07:00:27: Quote from: stevits on Thu, 08 February 2018, 13:59:16
I have not received a shipping notification or tracking number - powder case.

You have received it now right? Sorry I rarely open GH lately :(

Quote from: JDT79 on Sun, 11 February 2018, 21:50:04
Disregard I just now saw that you mentioned that for the powder coats. Mine was aluminum.

All of the the remaining order (including anodized) will be shipped tomorrow! Will update the tracking shortly after that :thumb:

Quote from: Spaghetti on Thu, 08 February 2018, 15:31:32
Super stoked for the lime green one!

I'm sorry to say this but yours the only one that still on factory, should be done next week hopefully. I'm sorry for this :-[
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: yosi1sland on Tue, 20 February 2018, 16:39:50: I have not received a shipping notification or tracking number
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: JDT79 on Tue, 20 February 2018, 19:23:04: I also haven't received my shipping/tracking info yet. Just and FYI I had a blue anodized.
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: That-Canadian on Wed, 21 February 2018, 09:01:17: Just adding onto this I have yet to receive tracking information as well. I had red anodized with a brass plate.
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: RealLaugh on Wed, 21 February 2018, 16:10:49: Quote from: That-Canadian on Wed, 21 February 2018, 09:01:17
Just adding onto this I have yet to receive tracking information as well. I had red anodized with a brass plate.

me neither, gold anodized with stainless steel plate for me. I think I saw a pile of gold anodized cases in the photo in the last update, that's the only info I have that they might be shipping soon.
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: jebbra on Wed, 21 February 2018, 21:47:04: Quote from: yosi1sland on Tue, 20 February 2018, 16:39:50
I have not received a shipping notification or tracking number

Quote from: RealLaugh on Wed, 21 February 2018, 16:10:49
Quote from: That-Canadian on Wed, 21 February 2018, 09:01:17
Just adding onto this I have yet to receive tracking information as well. I had red anodized with a brass plate.

me neither, gold anodized with stainless steel plate for me. I think I saw a pile of gold anodized cases in the photo in the last update, that's the only info I have that they might be shipping soon.

I'm sorry I don't have time yet to input the tracking number but rest assured, all of them is already shipped!
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: jebbra on Wed, 28 February 2018, 10:14:31: Okay all order tracking number has been sent out via email (hip hip hurraayy) ;D

Unfortunately I still can't call this a wrap because u/garththegarth order is still in re-process :'(

Meanwhile, please check out my newest project: a GMK set focused on ortholinear boards https://geekhack.org/index.php?topic=94285.0
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: jazzjarred on Wed, 28 February 2018, 13:17:10: I put together my NL-Bullet last night. Despite the delays in this group buy I am very happy with the end product!

(https://i.imgur.com/uckrE6s.jpg)

Many thanks to jebbra for organising this, your attention to detail shows :)

https://imgur.com/a/qgvZX (https://imgur.com/a/qgvZX)
Title: Re: [GB] NL–Bullet <<98% shipped, one more order to ship!>>
Post by: stoic-lemon on Thu, 01 March 2018, 04:53:24: Looks good. How does it sound?
Title: Re: [GB] NL–Bullet <<98% shipped, one more order to ship!>>
Post by: achilles_other_heel on Thu, 01 March 2018, 19:38:58: Good job getting them all-1 out! Glad you stuck with it

So is anvil still going to happen or do you need a break from keyboard cases haha
Title: Re: [GB] NL–Bullet <<98% shipped, one more order to ship!>>
Post by: jazzjarred on Fri, 02 March 2018, 06:00:18: NL-Bullet sound test:
Title: Re: [GB] NL–Bullet <<GB CLOSED; 98% shipped, one more order!>>
Post by: jebbra on Fri, 02 March 2018, 08:57:12: Quote from: jazzjarred on Wed, 28 February 2018, 13:17:10
I put together my NL-Bullet last night. Despite the delays in this group buy I am very happy with the end product!

Show Image
(https://i.imgur.com/uckrE6s.jpg)

Many thanks to jebbra for organising this, your attention to detail shows :)

https://imgur.com/a/qgvZX (https://imgur.com/a/qgvZX)

Thank you for your words! I hope you enjoy the case ;D

Quote from: achilles_other_heel on Thu, 01 March 2018, 19:38:58
Good job getting them all-1 out! Glad you stuck with it

So is anvil still going to happen or do you need a break from keyboard cases haha

No break, we are already start the revision of Anvil. We want to make it usable for usual OLKB plate (which is 2.5mm bigger in each side) instead of using a new plate like Bullet, so it need some tweaks. Will be making a new IC thread when I have something worth showing :)
Title: Re: [GB] NL–Bullet <<98% shipped, one more order to ship!>>
Post by: RealLaugh on Fri, 02 March 2018, 16:49:50: received my NL Bullet kit today

Great job Jebbra!

It was worth the wait, I am really happy with the quality of the anodization and the kit in general. This is a great example of how sometimes waiting longer means you get a great product, even if waiting is sometimes hard!

I built the kit almost immediately with some lubed Gateron Black switches, if anyone is interested I uploaded some pics here - https://imgur.com/a/jfEIZ

Hopefully see you around in the Anvil IC!
Title: Re: [GB] NL–Bullet <<98% shipped, one more order to ship!>>
Post by: lightningbeanjam on Mon, 05 March 2018, 16:55:39: Got my Bullet today. Super cool. The Space Grey sparkles. Thanks for the awesome kit.

Now I just need to choose switches...
Title: Re: [GB] NL–Bullet <<98% shipped, one more order to ship!>>
Post by: Spaghetti on Mon, 16 April 2018, 20:01:44: Still waiting on mine, it would be nice to have some kind of update.
Title: Re: [GB] NL–Bullet <<98% shipped, one more order to ship!>>
Post by: jebbra on Sat, 09 June 2018, 04:31:07: All orders are shipped! Thank you everyone for your understanding ;D

There will be extras, will be up next month :thumb:
Title: Re: [GB] NL–Bullet <<100% shipped, extras will be up Soon™>>
Post by: zacipult on Fri, 05 October 2018, 03:01:14: Recently came across this on the original thread to read that this made it to group buy.

Just made an account to say amazing job with the case it really looks incredible. By far the nicest I have seen for an olkb keyboard ever imo.

I take it I am way too late to the bandwagon now.

If there would be any possibility for any more case B still for the future, please send me an email. I believe you are able to do that on this site?

Cheers.
Title: Re: [GB] NL–Bullet <<100% shipped, extras will be up Soon™>>
Post by: ozan6661 on Fri, 05 October 2018, 03:32:34: Quote from: zacipult on Fri, 05 October 2018, 03:01:14
Recently came across this on the original thread to read that this made it to group buy.

Just made an account to say amazing job with the case it really looks incredible. By far the nicest I have seen for an olkb keyboard ever imo.

I take it I am way too late to the bandwagon now.

If there would be any possibility for any more case B still for the future, please send me an email. I believe you are able to do that on this site?

Cheers.

B case still in progress to fix some problem and our designer still in big project with goverment this year.