Author Topic: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)  (Read 50183 times)

0 Members and 1 Guest are viewing this topic.

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #150 on: Sun, 12 June 2016, 03:27:30 »
Just got an updated 3D render of my stabilizers... Looks very promising, addresses the issues present on both clip and screw type stabilizers.
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline joey

  • Posts: 2296
  • Location: UK
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #151 on: Sun, 12 June 2016, 03:30:02 »
The screw in types *need* to be screwed in, right?

Do they come pre-band-aided? :thumb:

Offline ntw

  • Posts: 501
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #152 on: Mon, 13 June 2016, 10:12:43 »
any idea if the Massdrop ones are the same as the ones I bought from Taobao??

https://www.massdrop.com/buy/transparent-stabilizer-pack
Wishlist: Hungrkey, Creamsicle Skullthulhu, MDMAver Skullthulhu, Goo, Taka

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #153 on: Mon, 13 June 2016, 10:13:50 »
any idea if the Massdrop ones are the same as the ones I bought from Taobao??

https://www.massdrop.com/buy/transparent-stabilizer-pack

Most likely, but that's because I don't recall any other source of clear stabilizers other than those and the ones Zeal is planning, which of course haven't been made yet.

Offline StinkyTheDonut

  • Posts: 52
  • Location: Yes
  • I like rubber domes.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #154 on: Mon, 13 June 2016, 16:32:16 »
any idea if the Massdrop ones are the same as the ones I bought from Taobao??

https://www.massdrop.com/buy/transparent-stabilizer-pack

Most likely, but that's because I don't recall any other source of clear stabilizers other than those and the ones Zeal is planning, which of course haven't been made yet.
Just saw those on massdrop and got excited. Then I read bad things about it and followed the trail to here.
Then I discovered this was cherry and PCB only.
I cry.
No love for hand wired projects with simple costar plates.
I'm fine with white ones too, but nobody outside of taobao sells them, and I don't know their quality.
Anyone point me in the right direction? Or help me beg for plate version?
I only have a washable keyboard.

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #155 on: Mon, 13 June 2016, 16:40:31 »
There are rumors on pricing of these stabilizers at Massdrop, is there any tentative price yet?

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #156 on: Mon, 13 June 2016, 22:02:52 »
The ones on Massdrop do look like the poorly made ones on Taobao. Seeing the stabilizer pull all the way up and not fall down makes me cringe. :/

No comment on pricing yet. The process to make my stabilizers isn't a simple one, is all I can say. Remember, it addresses issues present on clip in and screw in type stabilizers.

Won't be showing the render yet, but will in the future.

Packs will most likely be sold as follows:

7x 2u
1x 6.25u
1x 7u wire

All wires 24k gold plated.

Total 8 sets of stabilizer housing & inserts, 7x 2u wires, 1x 6.25u wire, 1x 7u wire.

        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #157 on: Mon, 13 June 2016, 22:33:03 »
Thank you for the feedback Zeal, I think the information is more than enough for now; besides, being aware that the rumors at MD about your pricing are just that is also good. I will certainly wait for yours any time. PCB mount clear ones with screws and pre-clipped stabilizers will be the best ones.

Offline effectiveduck

  • Posts: 394
  • Location: Australia
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #158 on: Mon, 13 June 2016, 22:37:04 »
The ones on Massdrop do look like the poorly made ones on Taobao. Seeing the stabilizer pull all the way up and not fall down makes me cringe. :/

No comment on pricing yet. The process to make my stabilizers isn't a simple one, is all I can say. Remember, it addresses issues present on clip in and screw in type stabilizers.

Won't be showing the render yet, but will in the future.

Packs will most likely be sold as follows:

7x 2u
1x 6.25u
1x 7u wire

All wires 24k gold plated.

Total 8 sets of stabilizer housing & inserts, 7x 2u wires, 1x 6.25u wire, 1x 7u wire.

It'd be cool to see 6u added to that list given that GMK are making 6u spacebars now and EnjoyPBT already makes them.

Regardless I'm looking forward to these ;D

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #159 on: Tue, 14 June 2016, 04:02:29 »
The ones on Massdrop do look like the poorly made ones on Taobao. Seeing the stabilizer pull all the way up and not fall down makes me cringe. :/

No comment on pricing yet. The process to make my stabilizers isn't a simple one, is all I can say. Remember, it addresses issues present on clip in and screw in type stabilizers.

Won't be showing the render yet, but will in the future.

Packs will most likely be sold as follows:

7x 2u
1x 6.25u
1x 7u wire

All wires 24k gold plated.

Total 8 sets of stabilizer housing & inserts, 7x 2u wires, 1x 6.25u wire, 1x 7u wire.

It'd be cool to see 6u added to that list given that GMK are making 6u spacebars now and EnjoyPBT already makes them.

Regardless I'm looking forward to these ;D

6u is definitely possible, but only a very small fraction of users would use 6u off centered spacebars.
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline Zorox

  • Posts: 94
  • Location: ISO-DE
  • Tactile FTW <3
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #160 on: Tue, 14 June 2016, 04:45:56 »
I am really one of your big followers now Zeal, and of course I back this up for my upcoming custom projects!!!

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #161 on: Tue, 14 June 2016, 07:40:16 »
The ones on Massdrop do look like the poorly made ones on Taobao. Seeing the stabilizer pull all the way up and not fall down makes me cringe. :/

No comment on pricing yet. The process to make my stabilizers isn't a simple one, is all I can say. Remember, it addresses issues present on clip in and screw in type stabilizers.

Won't be showing the render yet, but will in the future.

Packs will most likely be sold as follows:

7x 2u
1x 6.25u
1x 7u wire

All wires 24k gold plated.

Total 8 sets of stabilizer housing & inserts, 7x 2u wires, 1x 6.25u wire, 1x 7u wire.

It'd be cool to see 6u added to that list given that GMK are making 6u spacebars now and EnjoyPBT already makes them.

Regardless I'm looking forward to these ;D

6u is definitely possible, but only a very small fraction of users would use 6u off centered spacebars.

6u space bars cannot be flipped; that is a sacrilege.

Offline effectiveduck

  • Posts: 394
  • Location: Australia
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #162 on: Wed, 15 June 2016, 03:18:29 »

6u is definitely possible, but only a very small fraction of users would use 6u off centered spacebars.

Yea that's fair, I feel like there will be a bigger market for them in the future but for now there wouldn't be many buyers.


6u space bars cannot be flipped; that is a sacrilege.

Exactly :p

Offline ctrlX

  • Posts: 302
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #163 on: Fri, 17 June 2016, 12:48:35 »
Is there any rough estimate when the GB will take place? I apologise if this has been asked before. Browsed back a couple of pages and didn't see any post regarding this.

Offline iamtootallforthis

  • Something a lot Funnier
  • * Global Moderator
  • Posts: 4739
  • Location: West Palm Beach, FL
  • I like green stuffs.
    • WTB/WTTF Thread
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #164 on: Fri, 17 June 2016, 13:48:41 »
Is there any rough estimate when the GB will take place? I apologise if this has been asked before. Browsed back a couple of pages and didn't see any post regarding this.

Gonna be at least 2 months as the molds take 50 days.

I'd imagine Zeal will need to check the stabs after the molds are done before production so that will be another couple of weeks at minimum.

Offline Data

  • Posts: 2608
  • Location: Orlando, FL
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #165 on: Fri, 17 June 2016, 14:03:35 »
Yeah this will be like a Fall/Winter GB.

Offline ctrlX

  • Posts: 302
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #166 on: Fri, 17 June 2016, 14:46:49 »
Ah. Thanks for the info. Then I know I have to order other stabs for the upcoming build.

Offline krisst

  • Posts: 134
  • Location: Little Red Dot
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #167 on: Tue, 05 July 2016, 07:09:15 »
Hey Zeal, as the R3 groupbuy is about done. Any updates for these stabs? Thanks!

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #168 on: Tue, 05 July 2016, 13:32:59 »
Hey Zeal, as the R3 groupbuy is about done. Any updates for these stabs? Thanks!

Still waiting on the moulds to finish. These moulds aren't CNC'd, but rather made via EDM: https://en.wikipedia.org/wiki/Electrical_discharge_machining
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline krisst

  • Posts: 134
  • Location: Little Red Dot
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #169 on: Tue, 05 July 2016, 13:38:15 »
Hey Zeal, as the R3 groupbuy is about done. Any updates for these stabs? Thanks!

Still waiting on the moulds to finish. These moulds aren't CNC'd, but rather made via EDM: https://en.wikipedia.org/wiki/Electrical_discharge_machining

I remember EDM, back when I am still in school. XD

Alright then. Thank you!

Offline mind_funeral

  • savior of lost fortunes
  • Posts: 106
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #170 on: Thu, 21 July 2016, 09:48:16 »
Any updates on these?  I got a project on hold waiting for these! :)
Poker II.3 with Gateron Browns and SIP sockets,  Midnight/Twilight DCS
KBP V60 with Gateron Clears, EnjoyPBT Cyrillics
Topre Type Heaven

Offline Purp

  • Banned
  • Posts: 62
  • Location: KA
  • the colour, not the weed
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #171 on: Thu, 21 July 2016, 11:14:00 »
Any updates on these?  I got a project on hold waiting for these! :)

I'm in the same situation, hoping for a soonish release.

Offline BAS1C

  • Posts: 443
  • Location: Calgary, AB
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #172 on: Thu, 21 July 2016, 12:04:03 »
Holy dang! In for these Zeal. Your work amazes me! Looks like my zz96 is going to be Zeal'd to the nines.

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #173 on: Thu, 21 July 2016, 15:42:26 »
Moulds are done, pre-production pictures have been sent to me. A few tweaks are being made, and I'm really excited to show all the new stuff! :)
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1631
  • Location: 白い帽子
  • greyhat co-leader
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #174 on: Thu, 21 July 2016, 16:10:41 »
nice

Can't wait to put these in my board :)


Keyboards: HHKB Pro 1 & OTD 356CL Dark Greyhat Edition, baybee!

Offline Purp

  • Banned
  • Posts: 62
  • Location: KA
  • the colour, not the weed
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #175 on: Thu, 21 July 2016, 17:45:21 »
Moulds are done, pre-production pictures have been sent to me. A few tweaks are being made, and I'm really excited to show all the new stuff! :)

Super cool thanks for the little update, did they provide any new ETA?

Offline brighenne

  • Posts: 276
  • Location: Long Beach, CA
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #176 on: Thu, 21 July 2016, 17:48:42 »
Glad to hear about progress.

I've been assembling some aristotle stems in 65g zealios and hot damn these are great, looking forward to building them with these stabilizers.

Offline nugglets

  • Posts: 199
  • Location: Southern California
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #177 on: Thu, 21 July 2016, 18:02:56 »
Moulds are done, pre-production pictures have been sent to me. A few tweaks are being made, and I'm really excited to show all the new stuff! :)

Super cool thanks for the little update, did they provide any new ETA?

Zeal mentioned elsewhere that there will be 3 new projects and R4 zealios launching in August. Have to assume these are one of the projects, along with the RGB 60% he mentioned and probably his version of the QMX clips.

When in August is anyone's guess.

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #178 on: Thu, 21 July 2016, 18:50:38 »
Is there a target price for the sets of stabs?

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #179 on: Fri, 22 July 2016, 10:28:59 »
Moulds are done, pre-production pictures have been sent to me. A few tweaks are being made, and I'm really excited to show all the new stuff! :)

Super cool thanks for the little update, did they provide any new ETA?


Hopefully have samples in my hands by the end of the month/early August.

Glad to hear about progress.

I've been assembling some aristotle stems in 65g zealios and hot damn these are great, looking forward to building them with these stabilizers.

Yeah...65g Zealiostotles are out of the world.

Moulds are done, pre-production pictures have been sent to me. A few tweaks are being made, and I'm really excited to show all the new stuff! :)

Super cool thanks for the little update, did they provide any new ETA?

Zeal mentioned elsewhere that there will be 3 new projects and R4 zealios launching in August. Have to assume these are one of the projects, along with the RGB 60% he mentioned and probably his version of the QMX clips.

When in August is anyone's guess.

;)

Is there a target price for the sets of stabs?

Pictures say a thousand words...Will wait to get samples on my hands to show everyone before I comment on price.
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #180 on: Fri, 22 July 2016, 10:37:39 »
Will Aristotles make a comeback?

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #181 on: Fri, 22 July 2016, 10:42:22 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8941
  • Location: The Windy City
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #182 on: Fri, 22 July 2016, 10:43:28 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...

NOS Aristotles would be dandy.

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #183 on: Fri, 22 July 2016, 11:59:12 »
Showing the thing before the asking price is a good marketing practice.  :thumb:

Offline shangrila500

  • Posts: 70
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #184 on: Sat, 23 July 2016, 18:58:30 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...

Any idea when they might be available to purchase? I keep hearing great things about Aristotles and keep having an urge to try them!

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #185 on: Sat, 23 July 2016, 19:11:34 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...

Any idea when they might be available to purchase? I keep hearing great things about Aristotles and keep having an urge to try them!

It's only great in Zealio housings. :P

Will announce when I get Aristotles in.
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline ideus

  • * Exalted Elder
  • Posts: 8123
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #186 on: Sat, 23 July 2016, 19:16:30 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...

Any idea when they might be available to purchase? I keep hearing great things about Aristotles and keep having an urge to try them!

It's only great in Zealio housings. :p

Will announce when I get Aristotles in.

Mm! Should those interested parties save a little fortune to get some? Maybe with one kidney? LOL.

Offline shangrila500

  • Posts: 70
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #187 on: Sat, 23 July 2016, 20:53:48 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...

Any idea when they might be available to purchase? I keep hearing great things about Aristotles and keep having an urge to try them!

It's only great in Zealio housings. :P

Will announce when I get Aristotles in.

Good thing I bought plenty of Zealios in the last GB!

BTW, your shipping is AMAZING! I really don't mind paying extra for it because I know for a fact that it will be here the next day. I absolutely LOVE it! I just wish you had more LED colors and some Gateron Greens in stock right now...

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #188 on: Sun, 24 July 2016, 01:34:04 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...

Any idea when they might be available to purchase? I keep hearing great things about Aristotles and keep having an urge to try them!

It's only great in Zealio housings. :P

Will announce when I get Aristotles in.

Good thing I bought plenty of Zealios in the last GB!

BTW, your shipping is AMAZING! I really don't mind paying extra for it because I know for a fact that it will be here the next day. I absolutely LOVE it! I just wish you had more LED colors and some Gateron Greens in stock right now...

Thanks! :D I also love overnight express deliveries...I get spoiled when I use it to import stuff haha.

I've got most of the available 1.8mm colour variants in stock. Don't really have plans on stocking stock Gaterons for now, as many other vendors already do.
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline shangrila500

  • Posts: 70
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #189 on: Mon, 25 July 2016, 00:17:46 »
Will Aristotles make a comeback?

A remade version won't, but I'm securing a last batch of NOS Aristotles as we speak...

Any idea when they might be available to purchase? I keep hearing great things about Aristotles and keep having an urge to try them!

It's only great in Zealio housings. :P

Will announce when I get Aristotles in.

Good thing I bought plenty of Zealios in the last GB!

BTW, your shipping is AMAZING! I really don't mind paying extra for it because I know for a fact that it will be here the next day. I absolutely LOVE it! I just wish you had more LED colors and some Gateron Greens in stock right now...

Thanks! :D I also love overnight express deliveries...I get spoiled when I use it to import stuff haha.

I've got most of the available 1.8mm colour variants in stock. Don't really have plans on stocking stock Gaterons for now, as many other vendors already do.

It is just amazing, I have ordered from you 3 times so far and it has already spoiled me so much that watching my keycap pullers shipping from Massdrop is driving me up the wall!

I looked for LEDs last week when I ordered some stabs and you were out of a lot then. I may have been looking at the wrong sizes too though, it was late at night and I was tired so my memory is foggy!

A lot of places do stock them but they are almost always out of the clear top green and blues. OriginativeCo has blues but no greens and 1up has the milky Gaterons in green and blue but they are out of stock of everything with clear tops or I would order from them. The only place that has them in stock is Winkeyless. I am just wanting you to carry them so I can have everything in one place!

Are there any other places that are in NA that stock the clear top Gaterons? I am fairly new so I am unfamiliar with all the different vendors.

Offline MandrewDavis

  • Posts: 461
  • Location: Fl
  • Chasin' That Neon Rainbow
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #190 on: Mon, 25 July 2016, 01:36:54 »
Keep up the good work Zeal, looking forward to all the new items!

A lot of places do stock them but they are almost always out of the clear top green and blues. OriginativeCo has blues but no greens and 1up has the milky Gaterons in green and blue but they are out of stock of everything with clear tops or I would order from them. The only place that has them in stock is Winkeyless. I am just wanting you to carry them so I can have everything in one place!

Are there any other places that are in NA that stock the clear top Gaterons? I am fairly new so I am unfamiliar with all the different vendors.

I have had a great experience with SwitchTop.co for small, misc orders of switches and stabs. Its also nice that they stock alu feet.
I've come to view humanity as predominantly monkey business.

My Classifieds Thread

Offline shangrila500

  • Posts: 70
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #191 on: Thu, 28 July 2016, 00:40:20 »
Keep up the good work Zeal, looking forward to all the new items!

A lot of places do stock them but they are almost always out of the clear top green and blues. OriginativeCo has blues but no greens and 1up has the milky Gaterons in green and blue but they are out of stock of everything with clear tops or I would order from them. The only place that has them in stock is Winkeyless. I am just wanting you to carry them so I can have everything in one place!

Are there any other places that are in NA that stock the clear top Gaterons? I am fairly new so I am unfamiliar with all the different vendors.

I have had a great experience with SwitchTop.co for small, misc orders of switches and stabs. Its also nice that they stock alu feet.

Thanks for the heads up! That may be where I end up buying from unless I end up buying a numpad from winkeyless this coming up month (which I very well do!). Thank you for the link, this will come in handy in the future!

Offline AceRuckus

  • Posts: 92
  • Location: San Jose, CA
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #192 on: Thu, 28 July 2016, 22:54:14 »
Clear stabs please :)

Offline japanitrat

  • Posts: 135
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #193 on: Fri, 12 August 2016, 17:31:40 »
+1, really excited about the upcoming projects!

Offline Slash Emperor

  • Posts: 461
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #194 on: Fri, 12 August 2016, 19:18:44 »
I'd be interested in picking up 6-8 sets.

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Thread Starter
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: [IC] Transparent Cherry PCB Mount Stabs (pre-clipped, old style sliders)
« Reply #195 on: Fri, 12 August 2016, 19:34:09 »
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent