Can we get the plate that comes with the base kit with a custom layout for +$15 too? Or only custom layouts with add-on plates.+$15 is only custom layouts with add-on plates order.
Hi LZ, can you please fix the postal code in your order form? It says number only, but in Canada, we have letters too. Thank you.Okay, I check n Fixed.
Yo LZ is this limited edition? Think I'm gonna wait til later in the month to order...No limited. but i think 70~80ea
How does the red ano look?https://geekhack.org/index.php?topic=89360.msg2532209#msg2532209
Any pictures of a fully built board with caps? Would love to see more of the board.Okay,
Joined! Really looking forward to this, excellent design LZ. Hard to choose between black and silver color.It is easy. You can 2 color n 2 order. ;D
So if I pay for an mx plate with a custom layout, I could ask for a plate that supports a split space layout?Let me know, what do you want lay-out. I check for you.
That blue color is quite enticing :thumb:- 1u wkl blocker
I have a few questions:
- Is there a close-up picture of 1u WKL blockers attached to a top piece available? I would like to see the seam between the blocker and the case.
- How would the carbon fiber plate feel compared to a PC one? Would that be about as flexible as PC, but springier on bottom-out?
- Are the add-on stabilizers the screw-in kind?
That blue color is quite enticing :thumb:
I have a few questions:
- Is there a close-up picture of 1u WKL blockers attached to a top piece available? I would like to see the seam between the blocker and the case.
- How would the carbon fiber plate feel compared to a PC one? Would that be about as flexible as PC, but springier on bottom-out?
- Are the add-on stabilizers the screw-in kind?
Can we get the plate that comes with the base kit with a custom layout for +$15 too? Or only custom layouts with add-on plates.+$15 is only custom layouts with add-on plates order.
Can we get the plate that comes with the base kit with a custom layout for +$15 too? Or only custom layouts with add-on plates.+$15 is only custom layouts with add-on plates order.
Ok, so no custom cut carbon fiber plates then? no worries, just curious
Any pictures of a fully built board with caps? Would love to see more of the board.Okay,
I'll be ready soon and I'll show you the pictures.
[Note.]
Base Kit not including PCB
Because there are various PCBs, we want individual to choose according to preference.
any suggestion about the non-anodized?
will it quite easy to get plenty of scratches?
any suggestion about the non-anodized?
will it quite easy to get plenty of scratches?
So if I pay for an mx plate with a custom layout, I could ask for a plate that supports a split space layout?
So if I pay for an mx plate with a custom layout, I could ask for a plate that supports a split space layout?
Hey LZ I ordered without the pcb accidentally, how can I fix that and add the one I need to my order? Thanks.
i see but There was a slight problem because the shot blast treatment was done with electricity. But I changed it.
How is the anodizing quality on this LZ? I was very disappointed in my Ergo...
Any pictures of a fully built board with caps? Would love to see more of the board.check new post.
May i please see a pic with RGB diffuser?[attachimg=1]
Also, I'm sure the answer is no, but will there be a option to get ANSI only plates?
Also, I'm sure the answer is no, but will there be a option to get ANSI only plates?Normal plate is universal
can i buy only bag?sure, but It takes a long time because the order quantity is produced.
sure. fit Zeal60 pcb
[Note.]
Base Kit not including PCB
Because there are various PCBs, we want individual to choose according to preference.
So out of curiosity, would the Zeal60 pcb be compatible with the case?
Okay, thanks.Also, I'm sure the answer is no, but will there be a option to get ANSI only plates?Normal plate is universal
and ansi only plate is choice special plate option
Will this case fit other plates as well?
That blue color is quite enticing :thumb:- 1u wkl blocker
I have a few questions:
- Is there a close-up picture of 1u WKL blockers attached to a top piece available? I would like to see the seam between the blocker and the case.
- How would the carbon fiber plate feel compared to a PC one? Would that be about as flexible as PC, but springier on bottom-out?
- Are the add-on stabilizers the screw-in kind?
(Attachment Link)
- well, I will check again soon.
- No. only Cherry Genuine pcb mount stabilizers.
hey LZ,I too have a headache with too many options.
Which plate would u recommend for a black HHKB? It’s awesome to have so many options but just curious , as the designer of the board, what ur preference would be?
I’m in. Can’t help but get involved..Welcom to helldrop
Just curious, are there any plans for brass plate in the future?sry, i have no plan for brass plate
Do you want it?That blue color is quite enticing :thumb:- 1u wkl blocker
I have a few questions:
- Is there a close-up picture of 1u WKL blockers attached to a top piece available? I would like to see the seam between the blocker and the case.
- How would the carbon fiber plate feel compared to a PC one? Would that be about as flexible as PC, but springier on bottom-out?
- Are the add-on stabilizers the screw-in kind?
(Attachment Link)
- well, I will check again soon.
- No. only Cherry Genuine pcb mount stabilizers.
Thank you LZ. Would you happen to have detailed pics of these 1u blocker edges?
(Attachment Link) (Attachment Link)
May we also see a few more pictures of the blue keyboard sample?
damn this is temptingShall We Dance ;D
The diffusor is optional, right?acrylic diffuser is include base kit, not option.
It's so tempting, but I want a TX60 as well :D ...
Hi,
I noticed that there are some imperfections on the bottom of the keyboard. Noticeably here:Show Image(https://media.discordapp.net/attachments/312287977151660042/402285385016934400/unknown.png?width=952&height=718)
Is it possible to fix this issue as I think it could cause a problem with the rubber feet staying in place and the look is not the best.
Thanks.
Hi,
I noticed that there are some imperfections on the bottom of the keyboard. Noticeably here:Show Image(https://media.discordapp.net/attachments/312287977151660042/402285385016934400/unknown.png?width=952&height=718)
Is it possible to fix this issue as I think it could cause a problem with the rubber feet staying in place and the look is not the best.
Thanks.
Hi,I dont have problem,
I noticed that there are some imperfections on the bottom of the keyboard. Noticeably here:Show Image(https://media.discordapp.net/attachments/312287977151660042/402285385016934400/unknown.png?width=952&height=718)
Is it possible to fix this issue as I think it could cause a problem with the rubber feet staying in place and the look is not the best.
Thanks.
Yes, i use to keyboard 3M bumpons is #5302. for cls & tx series keyboard.Hi,
I noticed that there are some imperfections on the bottom of the keyboard. Noticeably here:Show Image(https://media.discordapp.net/attachments/312287977151660042/402285385016934400/unknown.png?width=952&height=718)
Is it possible to fix this issue as I think it could cause a problem with the rubber feet staying in place and the look is not the best.
Thanks.
not an issue if you use 1) black bumpons or 2) good bumpons
buy a sheet of 100 3m bumpons from amazon and never think about it again
Yes, i use to keyboard 3M bumpons is #5302. for cls & tx series keyboard.Hi,
I noticed that there are some imperfections on the bottom of the keyboard. Noticeably here:Show Image(https://media.discordapp.net/attachments/312287977151660042/402285385016934400/unknown.png?width=952&height=718)
Is it possible to fix this issue as I think it could cause a problem with the rubber feet staying in place and the look is not the best.
Thanks.
not an issue if you use 1) black bumpons or 2) good bumpons
buy a sheet of 100 3m bumpons from amazon and never think about it again
Yes, i use to keyboard 3M bumpons is #5302. for cls & tx series keyboard.Hi,
I noticed that there are some imperfections on the bottom of the keyboard. Noticeably here:Show Image(https://media.discordapp.net/attachments/312287977151660042/402285385016934400/unknown.png?width=952&height=718)
Is it possible to fix this issue as I think it could cause a problem with the rubber feet staying in place and the look is not the best.
Thanks.
not an issue if you use 1) black bumpons or 2) good bumpons
buy a sheet of 100 3m bumpons from amazon and never think about it again
in case anyone is curious, here's the amazon link (https://www.amazon.com/SJ5302-Clear-Bumpon-Blister-Bumpons/dp/B01ACPT2LU/ref=sr_1_5?ie=UTF8&qid=1515990605&sr=8-5&keywords=3m+5302)
the reason to use 3m bumpons over other is becuase the adhesive is a lot stronger than all the competitors
they're not coming off by accident
Damn, I'm already in the BOK.CP GB... What's the deadline for this GB and the invoice payment?
Damn, I'm already in the BOK.CP GB... What's the deadline for this GB and the invoice payment?
bottom of the first post
1/31 for orders, 2/10 for invoice
Does the case could be assembled either with or without the acrylic diffuser, right? I hope the board to be clean and simple as it is. Thanks.The diffusor is optional, right?acrylic diffuser is include base kit, not option.
It's so tempting, but I want a TX60 as well :D ...
base kit ((Case, brass Weight plate, Switch plate, Acrylic Diffuser, BAG, Bolts, Bumpons)) :p
TX60 is good.
Does the case could be assembled either with or without the acrylic diffuser, right? I hope the board to be clean and simple as it is. Thanks.The diffusor is optional, right?acrylic diffuser is include base kit, not option.
It's so tempting, but I want a TX60 as well :D ...
base kit ((Case, brass Weight plate, Switch plate, Acrylic Diffuser, BAG, Bolts, Bumpons)) :p
TX60 is good.
As someone who does not care for RGB underglow or acrylic diffusers in general I am not a fan of the trend towards integrated diffusers that must be included in order to assemble the board. One reason I am a big fan of the CLS line and all of LZ's boards for that matter!
I'm in and very excited for this. Silly question: are we supposed to see an immediate response via email upon submitting the order form?
Oh **** LZ, LZ-GH (V2)!? :eek:
I know this isn't the place to talk about it, but will it resemble the first version at all?
Do you want it?That blue color is quite enticing :thumb:- 1u wkl blocker
I have a few questions:
- Is there a close-up picture of 1u WKL blockers attached to a top piece available? I would like to see the seam between the blocker and the case.
- How would the carbon fiber plate feel compared to a PC one? Would that be about as flexible as PC, but springier on bottom-out?
- Are the add-on stabilizers the screw-in kind?
(Attachment Link)
- well, I will check again soon.
- No. only Cherry Genuine pcb mount stabilizers.
Thank you LZ. Would you happen to have detailed pics of these 1u blocker edges?
(Attachment Link) (Attachment Link)
May we also see a few more pictures of the blue keyboard sample?
(Attachment Link)
(Attachment Link)
(Attachment Link)
now, Blue n Red sample is other keyboard.
Red is like LZ St same color.
Do the plates allow for switch top removal?
only kit. Each case should not be separate.Do you want it?That blue color is quite enticing :thumb:- 1u wkl blocker
I have a few questions:
- Is there a close-up picture of 1u WKL blockers attached to a top piece available? I would like to see the seam between the blocker and the case.
- How would the carbon fiber plate feel compared to a PC one? Would that be about as flexible as PC, but springier on bottom-out?
- Are the add-on stabilizers the screw-in kind?
(Attachment Link)
- well, I will check again soon.
- No. only Cherry Genuine pcb mount stabilizers.
Thank you LZ. Would you happen to have detailed pics of these 1u blocker edges?
(Attachment Link) (Attachment Link)
May we also see a few more pictures of the blue keyboard sample?
(Attachment Link)
(Attachment Link)
(Attachment Link)
now, Blue n Red sample is other keyboard.
Red is like LZ St same color.
Looks good, thanks for these additional pics LZ :thumb:
I guess I will have to make a few changes to my order.
I am also curious if purchasing extra top pieces would be possible, like in Kin's TX-60/65 GB?
Do the plates allow for switch top removal?can't removal
I signed up two days ago, but didn't receive a confirmation e-mail. Should I sign up again?Order Deadline & Order check 2018-01-31
Of course, you can assemble it without the diffuser like all recent LZ keyboards.That was my question, didn't care so much about whether it was included o or not, but if it can be assembled for a clean look.
hey LZ,I too have a headache with too many options.
Which plate would u recommend for a black HHKB? It’s awesome to have so many options but just curious , as the designer of the board, what ur preference would be?
What switches do you use?
Sts n carbon for hardness.
About 20.5 mmOf course, you can assemble it without the diffuser like all recent LZ keyboards.That was my question, didn't care so much about whether it was included o or not, but if it can be assembled for a clean look.
Another thing I would like to know: How high is the front edge of the keyboard above the table?
The non-special 60% pcb is compatible.So Nerd60 and FaceW PCBs are compatible, correct?
You should check which arrays the switch plate supports.
Yes. Nerd. Bface ,poker.... compatibleThe non-special 60% pcb is compatible.So Nerd60 and FaceW PCBs are compatible, correct?
You should check which arrays the switch plate supports.
That sounds good. So I can use my 60% standard PCB (FaceW, GoN60, GH60 etc) with one of your plates?The non-special 60% pcb is compatible.So Nerd60 and FaceW PCBs are compatible, correct?
You should check which arrays the switch plate supports.
That sounds good. So I can use my 60% standard PCB (FaceW, GoN60, GH60 etc) with one of your plates?The non-special 60% pcb is compatible.So Nerd60 and FaceW PCBs are compatible, correct?
You should check which arrays the switch plate supports.
Yeah, you're right. Thanks for the clarification. I just need to sell a few stuff and then hopefully get a spot.That sounds good. So I can use my 60% standard PCB (FaceW, GoN60, GH60 etc) with one of your plates?The non-special 60% pcb is compatible.So Nerd60 and FaceW PCBs are compatible, correct?
You should check which arrays the switch plate supports.
It’s top mounted, so the pcb isn’t mounted to anything, it’s just held there by the switches.
The port is in the standard position.
As long as your pcb isn’t weirdly large, you can use any pcb you want. If you get a universal plate, you can use any pcb that supports any of the layouts the plate supports.
But if you wanted to use something more unusual, like a 64key with arrows, you could get a custom plate and use that instead.
There are probably a few random edge cases where the pcbs are poorly made so the port is out of alignment or the pcb is too wide or something, but those should be rare.
Any normal 60% pcb should work.
LZ,
Will the PCB have the CLS branding on it like the one in your picture,
and do the diodes & resistors come pre-soldered?
LZ,
Will the PCB have the CLS branding on it like the one in your picture,
and do the diodes & resistors come pre-soldered?
Would an extra bag increase shipping cost?Yes. Check the weight of the order, shipping costs are different.
Has it been said how much extra bags cost?1 bag : 30usd
Real carbon switch plate sample. ;D
(Attachment Link)
Real carbon switch plate sample. ;D
(Attachment Link)
Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
This GB include switch One of the options
normal carbon is universal.Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
This GB include switch One of the options
Yes, I ordered one. But can the carbon plate be done with custom layouts or only universal?
Interesting, rather the opposite of what I had expected then.
Looks pretty cool, however!
I may have missed it if someone already asked, but any chance of ALPS plates?
signed up awhile ago, but didn't receive a confirmation e-mail. Should I sign up again
Thank you stevesigned up awhile ago, but didn't receive a confirmation e-mail. Should I sign up again
No, you're all good. LZ doesn't send out confirmations. Orders are open until the 31st, I believe then there will be an order check spreadsheet up to make sure you have all the bits you wanted.
I'd like to use HHKB layout - would it be better to go with a special switch plate, or will the universal plate be fine?
Order is for a CLS h with CF plate.
Since I guess we're going to see more and more PCBs using the USB Type-C connectors: is the cutout wide enough for those? (~8.4mm)I see,
Just filled out the form, and have two questions remaining:
1. I entered the specifications for the "Special Order Layout" in the form on the field "Request to note", is this alright or do I need to send an e-mail additionally?
2. How long will I have time to change the address, and will the change in shipping costs be refunded? I have entered my current home address (Europe), but at the time of the GB fulfillment will be residing in Korea, but don't yet know the exact address there.
(If I should not ask this, please tell me and I will delete this.)
LZ, do you declare the total GB price when you ship packages internationally? Will we see closer to $35 or $500 on the shipment label?
Just filled out the form, and have two questions remaining:
1. I entered the specifications for the "Special Order Layout" in the form on the field "Request to note", is this alright or do I need to send an e-mail additionally?
2. How long will I have time to change the address, and will the change in shipping costs be refunded? I have entered my current home address (Europe), but at the time of the GB fulfillment will be residing in Korea, but don't yet know the exact address there.
You never responded about a blue plate. Possible? Yes? No?blue plate.no.
The blue is beautiful and I'm a big fan of a matching case and plate. Just completes the package.
You never responded about a blue plate. Possible? Yes? No?blue plate.no.
The blue is beautiful and I'm a big fan of a matching case and plate. Just completes the package.
normal carbon is universal.Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
This GB include switch One of the options
Yes, I ordered one. But can the carbon plate be done with custom layouts or only universal?
You can order carbon + special layout.
you can we get the included/default plate with a custom layout and one add-on plate with a custom layoutnormal carbon is universal.Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
This GB include switch One of the options
Yes, I ordered one. But can the carbon plate be done with custom layouts or only universal?
You can order carbon + special layout.
This is great.
I am a bit confused now: can we order only custom layout plates, or must we buy at least one universal plate per kit?
That is, can we get the included/default plate with a custom layout and one add-on plate with a custom layout too?
You never responded about a blue plate. Possible? Yes? No?blue plate.no.
The blue is beautiful and I'm a big fan of a matching case and plate. Just completes the package.
shame
i think grey case with blue plate would look really cool
maybe i'll refinish it if i go in on this
You never responded about a blue plate. Possible? Yes? No?blue plate.no.
The blue is beautiful and I'm a big fan of a matching case and plate. Just completes the package.
shame
i think grey case with blue plate would look really cool
maybe i'll refinish it if i go in on this
There are over 31 options. You have to do all this alone.
more options will drive me crazy.
That's great :DYou never responded about a blue plate. Possible? Yes? No?blue plate.no.
The blue is beautiful and I'm a big fan of a matching case and plate. Just completes the package.
shame
i think grey case with blue plate would look really cool
maybe i'll refinish it if i go in on this
There are over 31 options. You have to do all this alone.
more options will drive me crazy.
That's why I'll get it finished myself :D
don't make more work for yourself, LZ
I haven't the faintest idea where I would go or who I would entrust to finish my case for me. However, I can live with a blue case and a black or carbon fiber plate :)
I haven't the faintest idea where I would go or who I would entrust to finish my case for me. However, I can live with a blue case and a black or carbon fiber plate :)
Especially in Tennessee, there's probably a local metal shop that can do it.
I haven't the faintest idea where I would go or who I would entrust to finish my case for me. However, I can live with a blue case and a black or carbon fiber plate :)
Especially in Tennessee, there's probably a local metal shop that can do it.
Just sent an email to the closest aluminum shop near me. We shall see.
Knife makers alsoI haven't the faintest idea where I would go or who I would entrust to finish my case for me. However, I can live with a blue case and a black or carbon fiber plate :)
Especially in Tennessee, there's probably a local metal shop that can do it.
Just sent an email to the closest aluminum shop near me. We shall see.
The other place to look is gun shops. There are all sorts of places that anodize and cerakote guns.
Moreyou can we get the included/default plate with a custom layout and one add-on plate with a custom layoutnormal carbon is universal.Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
This GB include switch One of the options
Yes, I ordered one. But can the carbon plate be done with custom layouts or only universal?
You can order carbon + special layout.
This is great.
I am a bit confused now: can we order only custom layout plates, or must we buy at least one universal plate per kit?
That is, can we get the included/default plate with a custom layout and one add-on plate with a custom layout too?
Moreyou can we get the included/default plate with a custom layout and one add-on plate with a custom layoutnormal carbon is universal.Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
This GB include switch One of the options
Yes, I ordered one. But can the carbon plate be done with custom layouts or only universal?
You can order carbon + special layout.
This is great.
I am a bit confused now: can we order only custom layout plates, or must we buy at least one universal plate per kit?
That is, can we get the included/default plate with a custom layout and one add-on plate with a custom layout too?
Great, thank you LZ.
Yes, defult plate is universal.Moreyou can we get the included/default plate with a custom layout and one add-on plate with a custom layoutnormal carbon is universal.Real carbon switch plate sample. ;D
(Attachment Link)
Can we get custom carbon plates? or just aluminum/steel/pc?
This GB include switch One of the options
Yes, I ordered one. But can the carbon plate be done with custom layouts or only universal?
You can order carbon + special layout.
This is great.
I am a bit confused now: can we order only custom layout plates, or must we buy at least one universal plate per kit?
That is, can we get the included/default plate with a custom layout and one add-on plate with a custom layout too?
Great, thank you LZ.
Wait. I thought only extra plates could be custom layout, and the default plate has to be universal?
Any info on alps plates?What PCBs support the Alps? Please tell me.
Any info on alps plates?What PCBs support the Alps? Please tell me.
alps plate is only sts plate(1.2mm)
Any info on alps plates?What PCBs support the Alps? Please tell me.
alps plate is only sts plate(1.2mm)
This is the PCB that I was thinking about (Alps64):
https://geekhack.org/index.php?topic=69740.0 (https://geekhack.org/index.php?topic=69740.0)
It supports the Dell AT101 layout.Show Image(http://i.imgur.com/NXgaUvb.png)
alps plate is possible.Any info on alps plates?What PCBs support the Alps? Please tell me.
alps plate is only sts plate(1.2mm)
This is the PCB that I was thinking about (Alps64):
https://geekhack.org/index.php?topic=69740.0 (https://geekhack.org/index.php?topic=69740.0)
It supports the Dell AT101 layout.Show Image(http://i.imgur.com/NXgaUvb.png)
Does that mean that the universal Alps plate supports the AT101 caps? I have some caps from an AT101 at home and should use them...alps plate is possible.Any info on alps plates?What PCBs support the Alps? Please tell me.
alps plate is only sts plate(1.2mm)
This is the PCB that I was thinking about (Alps64):
https://geekhack.org/index.php?topic=69740.0 (https://geekhack.org/index.php?topic=69740.0)
It supports the Dell AT101 layout.Show Image(http://i.imgur.com/NXgaUvb.png)
The Alps again irritate my head.
Does that mean that the universal Alps plate supports the AT101 caps? I have some caps from an AT101 at home and should use them...alps plate is possible.Any info on alps plates?What PCBs support the Alps? Please tell me.
alps plate is only sts plate(1.2mm)
This is the PCB that I was thinking about (Alps64):
https://geekhack.org/index.php?topic=69740.0 (https://geekhack.org/index.php?topic=69740.0)
It supports the Dell AT101 layout.Show Image(http://i.imgur.com/NXgaUvb.png)
The Alps again irritate my head.
What colour would you choose for those caps? I was thinking of going with red. What do you think?
Who want alps plate?
LZ, here is the Alps plate for AEK layout. You can just drop this into your plate design.Thanks but i have tkl at101 wl, at101winkey and aek layout
LZ, here is the Alps plate for AEK layout. You can just drop this into your plate design.Thanks but i have tkl at101 wl, at101winkey and aek layout
I'll make no problem.
I made a lot of alps plate and i designed for MIRA include alps plate.
Who want alps plate?
How much are extra carbon fiber plates? There are different prices in the G form and first post: $35/37 + 13/18?
Does order check start Feb. 1st or is that the deadline for ordering and order check?
How do you know if you made it in? When you get an invoice on Feb 10-14??
Will there be a dampening mat?
Alps switch plate order open.
3type
No additional special options.
1. AT101 (winkey)
2. AT101 (winkeyless)
3. AEK II
Alps plate Order Here (https://goo.gl/forms/73k1XHjteV5ofK8b2) order deadline Feb.5(korea time)
Order Check (https://goo.gl/CCbP2e) order check deadline Feb.10(korea time)Hey LZ,
without alps plate order.
Alps switch plate order open.
3type
No additional special options.
1. AT101 (winkey)
2. AT101 (winkeyless)
3. AEK II
Alps plate Order Here (https://goo.gl/forms/73k1XHjteV5ofK8b2) order deadline Feb.5(korea time)
Hey,
Just trying to make sure. The AT101 (winkeyless) is 1.5, 1u 1.5, 7u spacebar, 1.5, 1u, 1.5 bottom row, correct?
Like this one?:Show Image(http://i.imgur.com/nX1Y2G4.png)
order check deadline Feb.10(korea time)
Okay, fixed.order check deadline Feb.10(korea time)
We just email correct if we have a change/problem? Thanks!
The Alps64 is Poker compatible and uses Mini-USB, I don't see any reason why it shouldn't work.Unfortunately the PCB does not fit properly into every universal 60% case. A fitment test would be perfect.
Is it possible to test with an Alps64 PCB? Thanks.
Thank you for the confirmation!Is it possible to test with an Alps64 PCB? Thanks.
yes, no problem.
Many 60PCB USB locations are slightly different, but no problem.
ALPS 60%(Alps64 pcb Test ok)Thank you for the confirmation!Is it possible to test with an Alps64 PCB? Thanks.
yes, no problem.
Many 60PCB USB locations are slightly different, but no problem.
update.Since I guess we're going to see more and more PCBs using the USB Type-C connectors: is the cutout wide enough for those? (~8.4mm)I see,
I think, type-c connectors is no problem.
and This gb in. i can test.
https://geekhack.org/index.php?topic=93685.0
60% There are many kinds of pcb. And the position of the connector is slightly different.
If you have a pcb dxf layout, I can check.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R), Zeal60, DO60 and iGK61(not yet, Need confirmation)
update.Since I guess we're going to see more and more PCBs using the USB Type-C connectors: is the cutout wide enough for those? (~8.4mm)I see,
I think, type-c connectors is no problem.
and This gb in. i can test.
https://geekhack.org/index.php?topic=93685.0
60% There are many kinds of pcb. And the position of the connector is slightly different.
If you have a pcb dxf layout, I can check.
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R), Zeal60, DO60 and iGK61(not yet, Need confirmation)
confirmed compatible pcb.
L3 finger60(leeku pcb), Nerd60, GH60, POCKER, Bface(R)(W), Zeal60, DO60 and iGK61(iGK64 is custom layout plate)
Sample PCB : iGK61 (backlight RGB LEDs)
(Attachment Link)
(Attachment Link)
(Attachment Link)
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.
Sent from my iPhone using Tapatalk
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.
Sent from my iPhone using Tapatalk
Got any tips for that?
Welp. Paid, now to forget all about it so I don’t just wait for it the whole time >_<.
Sent from my iPhone using Tapatalk
Got any tips for that?
1)Get into multiple GBs at the same time
2)eventually get overwhelmed trying to keep track of one particular keyboard
3)become homeless and begin a life of crime to supply your addiction
4) ? ? ?
5)Profit
I'm confused - for the HHKB version, how will the plate (I opted for CF) and PCB fit? Will I need to do some dremeling?
Edit: I guess it'll just sit under the blockers and not be an issue?
Let us know if there are any unpaid. I might pick one upYou‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)
Let us know if there are any unpaid. I might pick one upYou‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)
Wasn‘t purely because of that, but I somewhat had to decide between the two. Looking forward to this either way!Let us know if there are any unpaid. I might pick one upYou‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)
:eek:
Let us know if there are any unpaid. I might pick one upYou‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)
Let us know if there are any unpaid. I might pick one upYou‘re trying to pick up all the nice boards, aren‘t you? Now you know why I wanted to transfer my 268 AG spot ;)
UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%
(Attachment Link)
UPDATE. april.23
CNC 85%
SWITCH PLATE 70%
PCB(L3 Finger) 100%
BAG 70%
(Attachment Link)
MX Switch plate
carbon, pc, alu
(Attachment Link)
MX Switch plate
carbon, pc, alu
(Attachment Link)
Nice.
Can someone post the actual link to the order check? The I'm still getting redirected to Rainbow Magic Land when I click on links.
MX Switch plate
carbon, pc, alu
(Attachment Link)
Nice.
Can someone post the actual link to the order check? The I'm still getting redirected to Rainbow Magic Land when I click on links.
The link is correct, that seems to be a geek hack problem. Just copy paste the link.
MX Switch plate
carbon, pc, alu
(Attachment Link)
Nice.
Can someone post the actual link to the order check? The I'm still getting redirected to Rainbow Magic Land when I click on links.
The link is correct, that seems to be a geek hack problem. Just copy paste the link.
No, the Order Check link in the OP is definitely not working for me (even when copying to a new tab).
The one on page 4 does work though :thumb:
Blockers first anodized.
(Attachment Link)
UPDATE. may,08wow these look nicee
CNC Done
Anodize Sample done. Now Production
SWITCH PLATE 85%
PCB(L3 Finger) 100%
BAG 90%
(Attachment Link)
(Attachment Link)
UPDATE. may,08
CNC Done
Anodize Sample done. Now Production
SWITCH PLATE 85%
PCB(L3 Finger) 100%
BAG 90%
(Attachment Link)
(Attachment Link)
UPDATE. may,08
CNC Done
Anodize Sample done. Now Production
SWITCH PLATE 85%
PCB(L3 Finger) 100%
BAG 90%
(Attachment Link)
(Attachment Link)
Ooohyahhh :cool: Stoked! GMK Miami Nights or Noire Pulse on Blacc?
UPDATE. may,08
CNC Done
Anodize Sample done. Now Production
SWITCH PLATE 85%
PCB(L3 Finger) 100%
BAG 90%
(Attachment Link)
(Attachment Link)
Ooohyahhh :cool: Stoked! GMK Miami Nights or Noire Pulse on Blacc?
GMK Miami Nights imo. It's Cherry profile, and it looks cleaner imo. If I had a black MX board, I'd totally use GMK Miami Nights on it.
Suggestions on keycap colorways for a silver case? I was going to put SA Senna on this but that got canceled :-\
Suggestions on keycap colorways for a silver case? I was going to put SA Senna on this but that got canceled :-\
Suggestions on keycap colorways for a silver case? I was going to put SA Senna on this but that got canceled :-\
gmk soware
it's that good ****
also red riot/yolch
OG Beige needs no recommendation. It goes with everything :D
Right on. If 9009 had text + icon it would be perfect :)OG Beige needs no recommendation. It goes with everything :D
^
once my sets are over i'll go back to posting "9009 goes with everything" on every "recommend me a keyset" post
Right on. If 9009 had text + icon it would be perfect :)OG Beige needs no recommendation. It goes with everything :D
^
once my sets are over i'll go back to posting "9009 goes with everything" on every "recommend me a keyset" post
ExactlyRight on. If 9009 had text + icon it would be perfect :)OG Beige needs no recommendation. It goes with everything :D
^
once my sets are over i'll go back to posting "9009 goes with everything" on every "recommend me a keyset" post
Then buy Classic Retro?
UPDATE. may,26
CNC - Done
Anodize - 95%
SWITCH PLATE - Done
PCB(L3 Finger) - Done
BAG - Waiting for delivery
Next process.
Sorting n packing (2~3weeks)
I recevied LZ Bags.
19 Big boxs, 1 box include 8bag...
total 150 Bags....lol
For LZ CLS sh & ms
(Attachment Link)
(Attachment Link)
hell gate :eek:
(Attachment Link)
hell gate :eek:
(Attachment Link)
Hard weekend. :eek:
all Ship to ready.
(Attachment Link)
Sorting n packing (2~3weeks)
My my, that was faster than I expected! Can't wait to build, but with what switches though?What plate are u using?
Hard weekend. :eek:
all Ship to ready.
(Attachment Link)
Hard weekend. :eek:
all Ship to ready.
(Attachment Link)
Hard weekend. :eek:
all Ship to ready.
(Attachment Link)
So when do you to ship them?
Is shipping via DHL to CONUS?
thanks, LZ. I'm assuming usps takes over when it gets here, just trying to figure out who the end courier is.Is shipping via DHL to CONUS?
Shipping via EMS
thanks, LZ. I'm assuming usps takes over when it gets here, just trying to figure out who the end courier is.Is shipping via DHL to CONUS?
Shipping via EMS
So stoked to get this :) :) :) :) :) :) :) :)
thanks, LZ. I'm assuming usps takes over when it gets here, just trying to figure out who the end courier is.Is shipping via DHL to CONUS?
Shipping via EMS
So stoked to get this :) :) :) :) :) :) :) :)
Correct. Tracking number imports right over to USPS. Everything EMS from Kin and LZ has made it over safe and fast!
Hard weekend. :eek:
all Ship to ready.
(Attachment Link)
So when do you to ship them?
June 12
Registering shipping documents
Today, Took it from the post office(EMS) today.
Start delivery
Today, Took it from the post office(EMS) today.Yay! Will we be getting tracking info? It'd be great to know what day it's showing up so I can have somebody around to sign for it.
Start delivery
Today, Took it from the post office(EMS) today.Yay! Will we be getting tracking info? It'd be great to know what day it's showing up so I can have somebody around to sign for it.
Start delivery
감사합니다, 이 키보드 너무 기대됩니다!! ㅋㅋㅋToday, Took it from the post office(EMS) today.Yay! Will we be getting tracking info? It'd be great to know what day it's showing up so I can have somebody around to sign for it.
Start delivery
Update your invoice soon. Please wait. :p
Trying to figure out parts for my build. If I have the HHKB layout, do I need a 6.25 or 7u spacebar (and correspondingly sized stabilizer)? Or is it still my preference with the winkey?
Thanks!
Is the L3 Finger60 mini or micro-usb?Mini
Can confirm. They have shipped.Show Image(https://uploads.tapatalk-cdn.com/20180615/1cb8242e7d12533778601fc740df90ec.heic)Show Image(https://uploads.tapatalk-cdn.com/20180615/89aaaaa60b38536ea07fddf6973e4184.heic)
Can confirm. They have shipped.That blue looks fantastic! What build plans do you have for this sweet keyboard?Show Image(https://uploads.tapatalk-cdn.com/20180615/1cb8242e7d12533778601fc740df90ec.heic)Show Image(https://uploads.tapatalk-cdn.com/20180615/89aaaaa60b38536ea07fddf6973e4184.heic)
Just got mine. Sweet!That red looks great :thumb:
(Attachment Link)
Just got mine. Sweet!Beautiful. I‘m even more looking forward to my red one! Unfortunately I‘ll have to wait until my exams are over, but this looks very promising. Mine should arrive on Monday if everything goes well.
(Attachment Link)
How did this get to me from Korean in THREE DAYS?!?!?! TY LZ :cool:
How did this get to me from Korean in THREE DAYS?!?!?! TY LZ :cool:
Dang, I'm in CA as well and the latest activity states "Origin Post is Preparing Shipment" :(
I have a MASS amount of regret right now.. These look so good!You definitely should :cool:
Noooooooooo!
Tracking says it was delivered, but it definitely was not :(
Noooooooooo!
Tracking says it was delivered, but it definitely was not :(
That happened to me once, turns out my postman was just lazy and marked it off to meet his quota that day. It ended up getting dropped off the next day after I opened a dispute with the postmaster. Hopefully your case is similar :thumb:
I hope so, but tracking says someone signed for it.Oh wow, so sorry to hear that dude. If it were me I'd go to the Post Office first thing on Monday. They should be able to talk to whoever delivered that and get it figured out from there.
Yeah, that's what I'm hoping.I hope so, but tracking says someone signed for it.Oh wow, so sorry to hear that dude. If it were me I'd go to the Post Office first thing on Monday. They should be able to talk to whoever delivered that and get it figured out from there.
LZ CLS sh Self Tunning parts :D
For CLS sh MX switch plate(1.5mm)
https://goo.gl/kXtef5
For CLS sh Weight plate(5mm)
https://goo.gl/Zs2sqP
For CLS sh Acrylic diffuser (2 or 3mm)
https://goo.gl/s9UaET
LZ CLS sh Self Tunning parts :DWow, thanks LZ. Excited to make some customs stuff with these files.
For CLS sh MX switch plate(1.5mm)
https://goo.gl/kXtef5
For CLS sh Weight plate(5mm)
https://goo.gl/Zs2sqP
For CLS sh Acrylic diffuser (2 or 3mm)
https://goo.gl/s9UaET
Very nice👌 How are you liking the carbon fiber plate?
I've received my kit and built the board out with a split space bar layout. Boy do I love the heft of this thing but I have to say the programming of the Leeku PCB falls far short of expectation. My preferred layout is to have caps lock momentary toggle to layer 1 and the center space bar button momentary toggle to layer two. Is there a way to accomplish this with the Jigon software that I've missed?]
Thanks!
No doubt; I use QMK on my other boards (DZ60's) and have grown 100% hooked on this configuration. If I can't do this easily I'm considering selling my kit if anybody is interested: silver, non-HHKB style, 1 board built split space bar with Kailh Box Royals, one board un-built with two extra aluminum plates and an extra set of stabs. PM me if interested: $575.I have a feeling it's gonna be pretty difficult. I would just put a dz60 in there, that's what I did on mine.
(Attachment Link)
I finished the assembling work of LZ-CLSh.
Even though the plate is a little tight when holy panda switches are put, there's no problem with using them.
This is the best 60% keeb!
Thanks LZ!
Yeah, that's what I'm hoping.I hope so, but tracking says someone signed for it.Oh wow, so sorry to hear that dude. If it were me I'd go to the Post Office first thing on Monday. They should be able to talk to whoever delivered that and get it figured out from there.
Show Image(https://i.imgur.com/VThhzo4.jpg)Show Image(https://i.imgur.com/ReJd33J.jpg)
Purple-anodized LZ-CLSs
Show Image(https://i.imgur.com/VThhzo4.jpg)Show Image(https://i.imgur.com/ReJd33J.jpg)
Purple-anodized LZ-CLSs
Is the spacebar for the H a 7u?
If anyone is building theirs with the acrylic layer, please do share pics! :D
Yeah, that's what I'm hoping.I hope so, but tracking says someone signed for it.Oh wow, so sorry to hear that dude. If it were me I'd go to the Post Office first thing on Monday. They should be able to talk to whoever delivered that and get it figured out from there.
Were you ever able to recover it?
Yeah, that's what I'm hoping.I hope so, but tracking says someone signed for it.Oh wow, so sorry to hear that dude. If it were me I'd go to the Post Office first thing on Monday. They should be able to talk to whoever delivered that and get it figured out from there.
Were you ever able to recover it?
Sorry for the late reply.
Yeah, Luckily.
USPS must have ended up delivering it to someone in my neighborhood. When I went back up to the mailboxes 2 days later.
My 6 year old daughter was going through the already opened parcel lockers, and I heard her say "is this the package you've been looking for".
The person luckily must have read that they had the wrong package and left it in the parcel box, that or they noticed when they got it home, brought it back up and left it.
If it wasn't for my daughter randomly going through the open parcel lockers, who knows what would have happened?
If anyone is building theirs with the acrylic layer, please do share pics! :D
The purple one above has it.
Is there an English translation for http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787 ?
Is there an English translation for http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787 ?
L3 English manual. but-old version. a little diffrent.
https://geekhack.org/index.php?topic=83950.msg2236885#msg2236885
Finally built mine up with a Zeal60, Tealios and Jukebox. I love it!
(Attachment Link)
Finally built mine up with a Zeal60, Tealios and Jukebox. I love it!
(Attachment Link)
Very nice👌 How are you liking the carbon fiber plate?
I think it feels awesome! First time using one.
Does the L3 Finger60 PCB support n-key rollover? I can't seem to get Ctrl+Alt+Del (my Del being Fn+Backspace) to work.
Does the L3 Finger60 PCB support n-key rollover? I can't seem to get Ctrl+Alt+Del (my Del being Fn+Backspace) to work.
I have no issues with that
Does the L3 Finger60 PCB support n-key rollover? I can't seem to get Ctrl+Alt+Del (my Del being Fn+Backspace) to work.
I have no issues with that
Each of the three keys work individually. It's just that I can't get the Ctrl+Alt+Del combo to work. I do have Ctrl in the place of Caps Lock though.
Edit: I tried Shift+Del to delete a file without recycling and this didn't work. I also tried binding Delete to Fn + a different key -- this didn't work either. It seems like the problem for me is that any key combination with Delete (Fn + key) simply does not work.
Does the L3 Finger60 PCB support n-key rollover? I can't seem to get Ctrl+Alt+Del (my Del being Fn+Backspace) to work.
I have no issues with that
Each of the three keys work individually. It's just that I can't get the Ctrl+Alt+Del combo to work. I do have Ctrl in the place of Caps Lock though.
Edit: I tried Shift+Del to delete a file without recycling and this didn't work. I also tried binding Delete to Fn + a different key -- this didn't work either. It seems like the problem for me is that any key combination with Delete (Fn + key) simply does not work.
reset the pcb with the reset file and remap the board, see if that does anything
Does the L3 Finger60 PCB support n-key rollover? I can't seem to get Ctrl+Alt+Del (my Del being Fn+Backspace) to work.
I have no issues with that
Each of the three keys work individually. It's just that I can't get the Ctrl+Alt+Del combo to work. I do have Ctrl in the place of Caps Lock though.
Edit: I tried Shift+Del to delete a file without recycling and this didn't work. I also tried binding Delete to Fn + a different key -- this didn't work either. It seems like the problem for me is that any key combination with Delete (Fn + key) simply does not work.
reset the pcb with the reset file and remap the board, see if that does anything
I solved it. My Ctrl and Alt were mapped to "None" in the Fn layer so I had to remap them. Even though these two keys were pressed before the Fn key was pressed (for Ctrl+Alt+Del), they also needed to be mapped in the Fn layer to be recognized.
Finally got around to taking picsShow Image(https://i.imgur.com/OTY2anK.jpg)Show Image(https://i.imgur.com/c7wck7T.jpg)
Finally got around to taking picsShow Image(https://i.imgur.com/OTY2anK.jpg)Show Image(https://i.imgur.com/c7wck7T.jpg)
Finally got around to taking picsShow Image(https://i.imgur.com/OTY2anK.jpg)Show Image(https://i.imgur.com/c7wck7T.jpg)
(Attachment Link)
LZ-CLSh
(Attachment Link)
LZ-CLSh
(Attachment Link)
LZ-CLSh
Yo where'd you get that deskmat?
(Attachment Link)
LZ-CLSh
Yo where'd you get that deskmat?
(Attachment Link)
LZ-CLSh
(Attachment Link)Wow that's very flashy and cool at the same time.
LZ-CLSh
More picsShow Image(https://i.imgur.com/G3LnTBl.jpg)Show Image(https://i.imgur.com/lmIjWFy.jpg)
More picsShow Image(https://i.imgur.com/G3LnTBl.jpg)Show Image(https://i.imgur.com/lmIjWFy.jpg)
There is enough space for the port
https://i.imgur.com/T2WuASW.jpg
Did anyone else have an issue with their plate where the switch openings were so tight that it actually compressed the switch and changed the feel? I got the b-stock CLS h, maybe it was just an issue with this unit.
If anyone has a plate file for this I'd be much obliged.
Did anyone else have an issue with their plate where the switch openings were so tight that it actually compressed the switch and changed the feel? I got the b-stock CLS h, maybe it was just an issue with this unit.
If anyone has a plate file for this I'd be much obliged.
are you using holy pandas or some variation of them? i know that can be an issue on those switches
but also switches just change over time regardless soooo
Did anyone else have an issue with their plate where the switch openings were so tight that it actually compressed the switch and changed the feel? I got the b-stock CLS h, maybe it was just an issue with this unit.
If anyone has a plate file for this I'd be much obliged.
are you using holy pandas or some variation of them? i know that can be an issue on those switches
but also switches just change over time regardless soooo
Ink actually. I think I had an issue with MX Black too but I'll check again.
Did anyone else have an issue with their plate where the switch openings were so tight that it actually compressed the switch and changed the feel? I got the b-stock CLS h, maybe it was just an issue with this unit.
If anyone has a plate file for this I'd be much obliged.
are you using holy pandas or some variation of them? i know that can be an issue on those switches
but also switches just change over time regardless soooo
Ink actually. I think I had an issue with MX Black too but I'll check again.
aren't those some holy panda variation? that's probably it
Did anyone else have an issue with their plate where the switch openings were so tight that it actually compressed the switch and changed the feel? I got the b-stock CLS h, maybe it was just an issue with this unit.
If anyone has a plate file for this I'd be much obliged.
are you using holy pandas or some variation of them? i know that can be an issue on those switches
but also switches just change over time regardless soooo
Ink actually. I think I had an issue with MX Black too but I'll check again.
aren't those some holy panda variation? that's probably it
ink are gaterons with new plastic
Did anyone else have an issue with their plate where the switch openings were so tight that it actually compressed the switch and changed the feel? I got the b-stock CLS h, maybe it was just an issue with this unit.
If anyone has a plate file for this I'd be much obliged.
Anyone have the plate files for this board? I know LZ posted them but unfortunately the links are broken. Really want to make a custom plate for this, so any help would be appreciated. Thanks!
Anyone have the plate files for this board? I know LZ posted them but unfortunately the links are broken. Really want to make a custom plate for this, so any help would be appreciated. Thanks!
https://github.com/MajorKoos/KBDParts/tree/master/Switch%20Plates/CLS-Series
I need the plate file for this. It's restricted and I'm trying to get a new one cut
I need the plate file for this. It's restricted and I'm trying to get a new one cut
It's linked above
https://github.com/MajorKoos/KBDParts/tree/master/Switch%20Plates/CLS-Series
Can anyone confirm if the plates are 1.5mm?Yes